Usually it's not necessary to declare static functions if the symbols are
in the right order. Moving the definition of tsi_eth_driver down in the
compilation unit allows to drop two such declarations.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220919131515.885361-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We've met the problem that when there is a vlan tag inside
GRE encapsulation, the match of num_of_vlans fails.
It is caused by the vlan tag inside GRE payload has been
counted into num_of_vlans, which is not expected.

One example packet is like this:
Ethernet II, Src: Broadcom_68:56:07 (00:10:18:68:56:07)
                   Dst: Broadcom_68:56:08 (00:10:18:68:56:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 100
Internet Protocol Version 4, Src: 192.168.1.4, Dst: 192.168.1.200
Generic Routing Encapsulation (Transparent Ethernet bridging)
Ethernet II, Src: Broadcom_68:58:07 (00:10:18:68:58:07)
                   Dst: Broadcom_68:58:08 (00:10:18:68:58:08)
802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200
...
It should match the (num_of_vlans 1) rule, but it matches
the (num_of_vlans 2) rule.

The vlan tags inside the GRE or other tunnel encapsulated payload
should not be taken into num_of_vlans.
The fix is to stop counting the vlan number when the encapsulation
bit is set.

Fixes: 34951fcf ("flow_dissector: Add number of vlan tags dissector")
Signed-off-by: Qingqing Yang <qingqing.yang@broadcom.com>
Reviewed-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Link: https://lore.kernel.org/r/20220919074808.136640-1-qingqing.yang@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Added by:
commit e5cf1baf ("act_mirred: use TC_ACT_REINSERT when possible")
but no longer useful.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220919130627.3551233-1-jhs@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Colin Foster says:

====================
clean up ocelot_reset() routine

ocelot_reset() will soon be exported to a common library to be used by
the ocelot_ext system. This will make error values from regmap calls
possible, so they must be checked. Additionally, readx_poll_timeout()
can be substituted for the custom loop, as a simple cleanup.

I don't have hardware to verify this set directly, but there shouldn't
be any functional changes.
====================

Link: https://lore.kernel.org/r/20220917175127.161504-1-colin.foster@in-advantage.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ocelot_reset() function utilizes regmap_field_write() but wasn't
checking return values. While this won't cause issues for the current MMIO
regmaps, it could be an issue for externally controlled interfaces.

Add checks for these return values.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Clean up the reset code by utilizing readx_poll_timeout instead of a custom
loop.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Haoyue Xu says:

====================
net: ll_temac: Cleanup for clearing static warnings

Most static warnings are detected by Checkpatch.pl, mainly about:
(1) #1: About the comments.
(2) #2: About function name in a string.
(3) #3: About the open parenthesis.
(4) #4: About the else branch.
(6) #6: About trailing statements.
(7) #5,#7: About blank lines and spaces.
====================

Link: https://lore.kernel.org/r/20220917103843.526877-1-xuhaoyue1@hisilicon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cleaning some static warnings of indent.
Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cleaning some static warnings of trailing statements.
Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cleaning some static warnings of missing spaces around '='.
Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cleaning some static warnings of unnecessary else branch.
Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cleaning some static warnings of open parenthesis.
Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As Checkpatch.pl warns, prefer using '"%s...", __func__'
to using 'temac_device_reset', this function's name, in a string.
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cleaning some static warnings of block comments.
Signed-off-by: huangjunxian <huangjunxian6@hisilicon.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Reviewed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing __init/__exit annotations to module init/exit funcs.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20220917083535.20040-1-xiujianfeng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing __init/__exit annotations to module init/exit funcs.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Link: https://lore.kernel.org/r/20220917082118.7971-1-xiujianfeng@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

such expression:
	if (err)
		return err;
	return 0;
can simplify to:
	return err;
Signed-off-by: William Dean <williamsukatube@163.com>
Link: https://lore.kernel.org/r/20220917063556.2673-1-williamsukatube@163.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The inptu parameter 'features' is unused now. so remove it.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/20220917020451.63417-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Quite a few of the functions and other symbols defined in this driver had
forward declarations. They can all be dropped after reordering them.

This saves a few lines of code and reduces code duplication.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220917225142.473770-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Guangbin Huang says:

====================
net: hns3: updates for -next

This series includes some updates for the HNS3 ethernet driver.
====================

Link: https://lore.kernel.org/r/20220916023803.23756-1-huangguangbin2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, driver will always clear user defined field of flow director
in uninit process and sync flow director table in periodic task. However,
if hardware does not support flow director driver should not do those
processes, so add fd ability judgement.

The fd ability judgement in function hclge_clear_fd_rules_in_list() is
redundant, so delete it.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the function hclge_mbx_handler() has too many switch-case
statements, it makes this function too long. To improve code readability,
refactor this function and use lookup table instead.
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, when function hns3_nic_select_queue() converts dscp to priority,
it calls an indirect callback ae_algo->ops->get_dscp_prio to get priority.

However as function hns3_nic_select_queue() is in fast path, the indirect
call may cause degradation of performance. For optimization, this patch
moves dscp_app_cnt and dscp_prio from struct hclge_tm_info to struct
hnae3_knic_private_info, so they can be used in both hclge and hns3 layers.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch add support for external loopback test.
The successful test need the link is up with duplex full. The
driver do external loopback first, and then the whole offline
test.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There's no clear explanation of what VF Representors are for, their
 semantics, etc., outside of vendor docs and random conference slides.
Add a document explaining Representors and defining what drivers that
 implement them are expected to do.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220905135557.39233-1-ecree@xilinx.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Yang Yingliang says:

====================
net: drivers: Switch to use dev_err_probe() helper

In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER. It will print
error code in a human readable way and simplify the code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dev_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now, register_pernet_subsys() and register_netdevice_notifier() are both
after sock_register(). It can create PF_PACKET socket and process socket
once sock_register() successfully. It is possible PF_PACKET socket is
creating but register_pernet_subsys() and register_netdevice_notifier()
are not registered yet. Thus net->packet.sklist_lock and net->packet.sklist
will be accessed without initialization that is done in packet_net_init().
Although this is a low probability scenario.

Move register_pernet_subsys() and register_netdevice_notifier() to the
front in packet_init(). Correspondingly, adjust the unregister process
in packet_exit().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Return value directly from pskb_trim_rcsum() instead of
getting value from redundant variable err.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Delete the repeated word 'to' in the comment.

- Add the missing 'use' word within the sentence.

- Correct spelling on 'malformation', 'needs'.
Signed-off-by: Ruffalo Lavoisier <RuffaloLavoisier@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220919053447.5702-1-RuffaloLavoisier@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If CONFIG_DCB is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-,
will be failed, like this:

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c: In function ‘otx2_select_queue’:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:1886:19: error: unused variable ‘pf’ [-Werror=unused-variable]
  struct otx2_nic *pf = netdev_priv(netdev);
                   ^~
cc1: all warnings being treated as errors

To fix this build error, put the definition of *pf under the CONFIG_DCB.

Fixes: 99c969a8 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220919025840.256411-1-renzhijie2@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

E810 products can support low latency Tx timestamp register read.
This requires usage of threaded IRQ instead of kthread to reduce the
kthread start latency (spikes up to 20 ms).
Add a check for the device capability and use the new method if
supported.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220916201728.241510-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fabio Porcedda says:

====================
Add a secondary AT port to the Telit FN990

In order to add a secondary AT port to the Telit FN990 first add "DUN2"
to mhi_wwan_ctrl.c, after that add a seconday AT port to the
Telit FN990 in pci_generic.c
====================

Link: https://lore.kernel.org/r/20220916144329.243368-1-fabio.porcedda@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a secondary AT port using one of OEM reserved channel.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>