If users select sysfs support they get the character device
as well so that end-users cannot complain that they
"only have sysfs on my system". They should have the
character device at all times.

If someone is in so dire need of stripping out the
character device while still enabling the sysfs ABI they
can very well patch the kernel.

Also only show this obsolete option to expert users.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201110142724.14760-1-linus.walleij@linaro.org

Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201117105917.27591-1-festevam@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Added entry for xilinx GPIO drivers.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-10-git-send-email-srinivas.neeli@xilinx.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

In two different instances the return value of "of_property_read_u32"
API was neither captured nor checked.
Fixed it by capturing the return value and then checking for any error.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Addresses-Coverity: "check_return"
Link: https://lore.kernel.org/r/1605201148-4508-9-git-send-email-srinivas.neeli@xilinx.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Added remove function support.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-7-git-send-email-srinivas.neeli@xilinx.com
[dropped pm disable call]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Adds clock support to the Xilinx GPIO driver.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-4-git-send-email-srinivas.neeli@xilinx.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Specify clock property in binding.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-3-git-send-email-srinivas.neeli@xilinx.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Arrange header files in sorted order.
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/1605201148-4508-2-git-send-email-srinivas.neeli@xilinx.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-gpio-v5.11-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into devel

intel-gpio for v5.11-1

* Refactor GPIO library to support bias and debounce ACPI settings

The following is an automated git shortlog grouped by driver:

gpiolib:
 -  acpi: Make Intel GPIO tree official for GPIO ACPI work
 -  acpi: Use BIT() macro to increase readability
 -  acpi: Convert pin_index to be u16
 -  acpi: Extract acpi_request_own_gpiod() helper
 -  acpi: Make acpi_gpio_to_gpiod_flags() usable for GpioInt()
 -  acpi: Set initial value for output pin based on bias and polarity
 -  acpi: Move acpi_gpio_to_gpiod_flags() upper in the code
 -  acpi: Move non-critical code outside of critical section
 -  acpi: Take into account debounce settings
 -  acpi: Use named item for enum gpiod_flags variable
 -  acpi: Respect bias settings for GpioInt() resource
 -  Introduce gpio_set_debounce_timeout() for internal use
 -  Extract gpio_set_config_with_argument_optional() helper
 -  move bias related code from gpio_set_config() to gpio_set_bias()
 -  Extract gpio_set_config_with_argument() for future use
 -  use proper API to pack pin configuration parameters
 -  add missed break statement
 -  Replace unsigned by unsigned int

Merge tag 'intel-pinctrl-v5.10-2' into HEAD:
 - Merge tag 'intel-pinctrl-v5.10-2' into HEAD

pinctrl:
 -  intel: Set default bias in case no particular value given
 -  intel: Fix 2 kOhm bias which is 833 Ohm

Linux 5.10-rc4

Make Intel GPIO tree official for GPIO ACPI work.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We may use BIT() macro to increase readability in
acpi_gpio_adr_space_handler().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

As specified by ACPI the pin index is 16-bit unsigned integer.
Define the variable, which holds it, accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

It appears that we are using similar code excerpts for ACPI OpRegion
and event handling. Deduplicate those excerpts by extracting a new
acpi_request_own_gpiod() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

GpioInt() implies input configuration of the pin. Add this to
the acpi_gpio_to_gpiod_flags() and make usable for GpioInt().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

GpioIo() resources don't contain an initial value for the output pin.
Therefore instead of deducting its value solely based on bias field
we should deduce that value from the polarity and the bias fields.
Typical scenario is, when pin is defined in the table and its polarity,
specified in _DSD or via platform code, is defined as active low,
in the following call chain:

  -> acpi_populate_gpio_lookup()
     -> acpi_gpio_to_gpiod_flags()

it will return GPIOD_OUT_HIGH if bias is set no matter if polarity
is GPIO_ACTIVE_LOW, so it will return the current level instead of
the logical level.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Vasile-Laurentiu Stanimir <vasile-laurentiu.stanimir@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Move acpi_gpio_to_gpiod_flags() upper in the code to allow further refactoring.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Mika noticed that some code is run under mutex when it doesn't require
the lock, like an error code assignment.

Move non-critical code outside of critical section.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We didn't take into account the debounce settings supplied by ACPI.
This change is targeting the mentioned gap.
Reported-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Use named item instead of plain integer for enum gpiod_flags
to make it clear that even 0 has its own meaning.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

In some cases the GpioInt() resource is coming with bias settings
which may affect system functioning. Respect bias settings for
GpioInt() resource by calling acpi_gpio_update_gpiod_*flags() API
in acpi_dev_gpio_irq_get().
Reported-by: Jamie McClymont <jamie@kwiius.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

In some cases we would like to have debounce setter which doesn't fail
when a feature is not supported by a controller.

Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>

This function is useful for internal use in the GPIO library.
There will be new user coming, prepare a helper for the new comer
and the existing ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Move bias related code from gpio_set_config() to gpio_set_bias().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

In the future we will need to have a separate function
that takes an arbitrary argument value.

Extract gpio_set_config_with_argument() for that purpose.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Instead of open coded macro use, call pinconf_to_config_packed().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

It's no difference in the functionality, but after the change the code
is less error prone to various checkers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Replace unsigned by unsigned int in GPIO library code.
Note, legacy API left untouched.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

intel-pinctrl for v5.10-2

* Respect bias setting when comes from ACPI

The following is an automated git shortlog grouped by driver:

intel:
 -  Set default bias in case no particular value given
 -  Fix 2 kOhm bias which is 833 Ohm

Pull drm fixes from Dave Airlie:
 "Nouveau fixes:

   - atomic modesetting regression fix

   - ttm pre-nv50 fix

   - connector NULL ptr deref fix"

* tag 'drm-fixes-2020-11-16' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere
  drm/nouveau/ttm: avoid using nouveau_drm.ttm.type_vram prior to nv50
  drm/nouveau/kms: Fix NULL pointer dereference in nouveau_connector_detect_depth

- atomic modesetting regression fix
- ttm pre-nv50 fix
- connector NULL ptr deref fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5D9p78MNN0OxVeRZxN8LDqcadJEGUEFCgWJQ6+_rjPuw@mail.gmail.com

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc/whatever driver fixes for 5.10-rc4.

  Nothing huge, lots of small fixes for reported issues:

   - habanalabs driver fixes

   - speakup driver fixes

   - uio driver fixes

   - virtio driver fix

   - other tiny driver fixes

  Full details are in the shortlog.

  All of these have been in linux-next for a full week with no reported
  issues"

* tag 'char-misc-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  uio: Fix use-after-free in uio_unregister_device()
  firmware: xilinx: fix out-of-bounds access
  nitro_enclaves: Fixup type and simplify logic of the poll mask setup
  speakup ttyio: Do not schedule() in ttyio_in_nowait
  speakup: Fix clearing selection in safe context
  speakup: Fix var_id_t values and thus keymap
  virtio: virtio_console: fix DMA memory allocation for rproc serial
  habanalabs/gaudi: mask WDT error in QMAN
  habanalabs/gaudi: move coresight mmu config
  habanalabs: fix kernel pointer type
  mei: protect mei_cl_mtu from null dereference

Pull USB and Thunderbolt fixes from Greg KH:
 "Here are some small Thunderbolt and USB driver fixes for 5.10-rc4 to
  solve some reported issues.

  Nothing huge in here, just small things:

   - thunderbolt memory leaks fixed and new device ids added

   - revert of problem patch for the musb driver

   - new quirks added for USB devices

   - typec power supply fixes to resolve much reported problems about
     charging notifications not working anymore

  All except the cdc-acm driver quirk addition have been in linux-next
  with no reported issues (the quirk patch was applied on Friday, and is
  self-contained)"

* tag 'usb-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode
  MAINTAINERS: add usb raw gadget entry
  usb: typec: ucsi: Report power supply changes
  xhci: hisilicon: fix refercence leak in xhci_histb_probe
  Revert "usb: musb: convert to devm_platform_ioremap_resource_byname"
  thunderbolt: Add support for Intel Tiger Lake-H
  thunderbolt: Only configure USB4 wake for lane 0 adapters
  thunderbolt: Add uaccess dependency to debugfs interface
  thunderbolt: Fix memory leak if ida_simple_get() fails in enumerate_services()
  thunderbolt: Add the missed ida_simple_remove() in ring_request_msix()

Pull kvm fixes from Paolo Bonzini:
 "Fixes for ARM and x86, the latter especially for old processors
  without two-dimensional paging (EPT/NPT)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use
  KVM: SVM: Update cr3_lm_rsvd_bits for AMD SEV guests
  KVM: x86: Introduce cr3_lm_rsvd_bits in kvm_vcpu_arch
  KVM: x86: clflushopt should be treated as a no-op by emulation
  KVM: arm64: Handle SCXTNUM_ELx traps
  KVM: arm64: Unify trap handlers injecting an UNDEF
  KVM: arm64: Allow setting of ID_AA64PFR0_EL1.CSV2 from userspace

Pull x86 fixes from Thomas Gleixner:
 "A small set of fixes for x86:

   - Cure the fallout from the MSI irqdomain overhaul which missed that
     the Intel IOMMU does not register virtual function devices and
     therefore never reaches the point where the MSI interrupt domain is
     assigned. This made the VF devices use the non-remapped MSI domain
     which is trapped by the IOMMU/remap unit

   - Remove an extra space in the SGI_UV architecture type procfs output
     for UV5

   - Remove a unused function which was missed when removing the UV BAU
     TLB shootdown handler"

* tag 'x86-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  iommu/vt-d: Cure VF irqdomain hickup
  x86/platform/uv: Fix copied UV5 output archtype
  x86/platform/uv: Drop last traces of uv_flush_tlb_others

Pull perf fixes from Thomas Gleixner:
 "A set of fixes for perf:

    - A set of commits which reduce the stack usage of various perf
      event handling functions which allocated large data structs on
      stack causing stack overflows in the worst case

    - Use the proper mechanism for detecting soft interrupts in the
      recursion protection

    - Make the resursion protection simpler and more robust

    - Simplify the scheduling of event groups to make the code more
      robust and prepare for fixing the issues vs. scheduling of
      exclusive event groups

    - Prevent event multiplexing and rotation for exclusive event groups

    - Correct the perf event attribute exclusive semantics to take
      pinned events, e.g. the PMU watchdog, into account

    - Make the anythread filtering conditional for Intel's generic PMU
      counters as it is not longer guaranteed to be supported on newer
      CPUs. Check the corresponding CPUID leaf to make sure

    - Fixup a duplicate initialization in an array which was probably
      caused by the usual 'copy & paste - forgot to edit' mishap"

* tag 'perf-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Fix Add BW copypasta
  perf/x86/intel: Make anythread filter support conditional
  perf: Tweak perf_event_attr::exclusive semantics
  perf: Fix event multiplexing for exclusive groups
  perf: Simplify group_sched_in()
  perf: Simplify group_sched_out()
  perf/x86: Make dummy_iregs static
  perf/arch: Remove perf_sample_data::regs_user_copy
  perf: Optimize get_recursion_context()
  perf: Fix get_recursion_context()
  perf/x86: Reduce stack usage for x86_pmu::drain_pebs()
  perf: Reduce stack usage of perf_output_begin()

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler fixes:

   - Address a load balancer regression by making the load balancer use
     the same logic as the wakeup path to spread tasks in the LLC domain

   - Prefer the CPU on which a task run last over the local CPU in the
     fast wakeup path for asymmetric CPU capacity systems to align with
     the symmetric case. This ensures more locality and prevents massive
     migration overhead on those asymetric systems

   - Fix a memory corruption bug in the scheduler debug code caused by
     handing a modified buffer pointer to kfree()"

* tag 'sched-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix memory corruption caused by multiple small reads of flags
  sched/fair: Prefer prev cpu in asymmetric wakeup path
  sched/fair: Ensure tasks spreading in LLC during LB

Pull locking fixes from Thomas Gleixner:
 "Two fixes for the locking subsystem:

   - Prevent an unconditional interrupt enable in a futex helper
     function which can be called from contexts which expect interrupts
     to stay disabled across the call

   - Don't modify lockdep chain keys in the validation process as that
     causes chain inconsistency"

* tag 'locking-urgent-2020-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Avoid to modify chain keys in validate_chain()
  futex: Don't enable IRQs unconditionally in put_pi_state()

Pull percpu fix and cleanup from Dennis Zhou:
 "A fix for a Wshadow warning in the asm-generic percpu macros came in
  and then I tacked on the removal of flexible array initializers in the
  percpu allocator"

* 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: convert flexible array initializers to use struct_size()
  asm-generic: percpu: avoid Wshadow warning