- 15 Dec, 2022 6 commits
-
-
Zhang Jiaming authored
Change 'modifed' to 'modified'. Change 'Updata' to 'Update'. Change 'Initiatlize' to 'Initialize'. Signed-off-by:
Zhang Jiaming <jiaming@nfschina.com> Link: https://lore.kernel.org/r/20220622085344.23519-1-jiaming@nfschina.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
Xiang wangx authored
Delete the redundant word 'is'. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Link: https://lore.kernel.org/r/20220605083515.9514-1-wangxiang@cdjrlc.comSigned-off-by:
-
shaomin Deng authored
Signed-off-by:
shaomin Deng <dengshaomin@cdjrlc.com> Link: https://lore.kernel.org/r/20220808152354.3641-1-dengshaomin@cdjrlc.com Link: https://lore.kernel.org/r/20220808153454.6844-1-dengshaomin@cdjrlc.com Link: https://lore.kernel.org/r/20220808152822.5012-1-dengshaomin@cdjrlc.comSigned-off-by:
-
Wadim Egorov authored
Make the interrupt pin of the RV3028 usable with GPIO controllers without level type IRQs support, such as the TI Davinci GPIO controller. Therefore, allow the IRQ type to be passed from the device tree if available. Based on commit d4785b46 ("rtc: pcf2127: use IRQ flags obtained from device tree if available") Signed-off-by:
Wadim Egorov <w.egorov@phytec.de> Link: https://lore.kernel.org/r/20221208133605.4193907-1-w.egorov@phytec.deSigned-off-by:
-
ye xingchen authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202212051134455911470@zte.com.cnSigned-off-by:
-
Jean Delvare authored
Since commit 0166dc11 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20221124154359.039be06c@endymion.delvareSigned-off-by:
-
- 12 Dec, 2022 1 commit
-
-
Marek Vasut authored
Convert the m41t80 text schema to YAML schema. Add "#clock-cells" requirement, which is required by clock-output-names. Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221211205124.23823-1-marex@denx.deSigned-off-by:
-
- 11 Dec, 2022 4 commits
-
-
Alexandre Belloni authored
pcf85063_clkout_control reads the wrong register but then update the correct one. Reported-by:
Janne Terho <janne.terho@ouman.fi> Fixes: 8c229ab6 ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework") Link: https://lore.kernel.org/r/20221211223553.59955-1-alexandre.belloni@bootlin.comSigned-off-by:
-
Alexandre Belloni authored
rx6110_spi_of_match is not used when !OF, leading to a warning: >> drivers/rtc/rtc-rx6110.c:384:34: warning: 'rx6110_spi_of_match' defined but not used [-Wunused-const-variable=] 384 | static const struct of_device_id rx6110_spi_of_match[] = { | ^~~~~~~~~~~~~~~~~~~ Reported-by:kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20221211215756.54002-1-alexandre.belloni@bootlin.comSigned-off-by:
-
Sebastian Reichel authored
Reduce usage of 'struct rk808' (driver data of the parent MFD), so that only the chip variant field is still being accessed directly. This allows restructuring the MFD driver to support SPI based PMICs. Acked-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221020204251.108565-4-sebastian.reichel@collabora.comSigned-off-by:
-
Kees Cook authored
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. msc313_rtc_probe() was passing clk_disable_unprepare() directly, which did not have matching prototypes for devm_add_action_or_reset()'s callback argument. Refactor to use devm_clk_get_enabled() instead. This was found as a result of Clang's new -Wcast-function-type-strict flag, which is more sensitive than the simpler -Wcast-function-type, which only checks for type width mismatches. Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Daniel Palmer <daniel@thingy.jp> Cc: Romain Perier <romain.perier@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rtc@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Daniel Palmer <daniel@thingy.jp> Tested-by:
-
- 10 Dec, 2022 3 commits
-
-
Neil Armstrong authored
Convert the Amlogic Meson6 RTC bindings to dt-schema. Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
-
Gaosheng Cui authored
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk) should be called in the error handling of devm_rtc_allocate_device(), so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe() to fix it. Fixes: 6515e23b ("rtc: pic32: convert to devm_rtc_allocate_device") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221123015953.1998521-1-cuigaosheng1@huawei.comSigned-off-by:
-
Gaosheng Cui authored
The clk_disable_unprepare() should be called in the error handling of clk_get_rate(), fix it. Fixes: b5b2bdfc ("rtc: st: Add new driver for ST's LPC RTC") Signed-off-by:
-
- 16 Nov, 2022 4 commits
-
-
Alexander Stein authored
If the alarms are disabled the topmost bit (AEN_*) is set in the alarm registers. This is also interpreted in BCD number leading to this warning: rtc rtc0: invalid alarm value: 2022-09-21T80:80:80 Fix this by masking alarm enabling and reserved bits. Fixes: 05cb3a56 ("rtc: pcf85063: add alarm support") Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220921074141.3903104-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
paulmn authored
Bugfix for an issue detected when a goldcap capacitor gets fully discharged due to a long absence of the power supply, and then recharges again. The RTC failed to continue to keep the real-time clock. This was caused by the incorrect handling of the STOP bit in the RTC internal register. This fix solves the problem. Signed-off-by:
paulmn <paulmn@axis.com> Link: https://lore.kernel.org/r/20220829124639.10906-1-paulmn@axis.comSigned-off-by:
-
Riwen Lu authored
Add wakeup support for rtc-efi, so we can wakeup from S3/S4/S5 through rtcwake. Signed-off-by:
Riwen Lu <luriwen@kylinos.cn> Link: https://lore.kernel.org/r/TYWP286MB260191455377CEBD2336557EB1659@TYWP286MB2601.JPNP286.PROD.OUTLOOK.COMSigned-off-by:
-
Vincent Whitchurch authored
If there is no IRQ hooked up, clear RTC_FEATURE_ALARM to make the core ensure that userspace is made aware that alarms are not supported. Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/20220301131220.4011810-1-vincent.whitchurch@axis.comSigned-off-by:
-
- 15 Nov, 2022 22 commits
-
-
Stefan Eichenberger authored
On an iMX6ULL the following message appears when a wakealarm is set: echo 0 > /sys/class/rtc/rtc1/wakealarm rtc rtc1: Timeout trying to get valid LPSRT Counter read This does not always happen but is reproducible quite often (7 out of 10 times). The problem appears because the iMX6ULL is not able to read the registers within one 32kHz clock cycle which is the base clock of the RTC. Therefore, this patch allows a difference of up to 320 cycles (10ms). 10ms was chosen to be big enough even on systems with less cpu power (e.g. iMX6ULL). According to the reference manual a difference is fine: - If the two consecutive reads are similar, the value is correct. The values have to be similar, not equal. Fixes: cd7f3a24 ("rtc: snvs: Add timeouts to avoid kernel lockups") Reviewed-by:
Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by:
Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by:
Francesco Dolcini <francesco@dolcini.it> Link: https://lore.kernel.org/r/20221106115915.7930-1-francesco@dolcini.itSigned-off-by:
-
Rafael J. Wysocki authored
Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to prevent it from operating on stale data in case the event triggers after driver removal. Fixes: 311ee9c1 ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Zhang Rui <rui.zhang@intel.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacherSigned-off-by:
-
Rafael J. Wysocki authored
The names of rtc_wake_setup() and cmos_wake_setup() don't indicate that these functions are ACPI-related, which is the case, and the former doesn't really reflect the role of the function. Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(), respectively, to address this shortcoming. No intentional functional impact. Signed-off-by:
-
Rafael J. Wysocki authored
Reorder the ACPI-related code before cmos_do_probe() so as to eliminate excessive forward declarations of some functions. While at it, for consistency, add the inline modifier to the definitions of empty stub static funtions and remove it from the corresponding definitions of functions with non-empty bodies. No intentional functional impact. Signed-off-by:
-
Rafael J. Wysocki authored
To reduce code duplication, move the invocation of rtc_wake_setup() into cmos_do_probe() and simplify the callers of the latter. No intentional functional impact. Signed-off-by:
-
Rafael J. Wysocki authored
Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it can operate on the cmos_rtc variable directly, so it need not set the platform_data pointer before cmos_do_probe() is called. Instead, it can be called by cmos_do_probe() in the case when the platform_data pointer is not set to implement the default behavior (which is to use the FADT information as long as ACPI support is enabled). Modify the code accordingly. While at it, drop a comment that doesn't really match the code it is supposed to be describing. Signed-off-by:
-
Shang XiaoJing authored
devm_rtc_allocate_device() will alloc a rtc_device first, and then run dev_set_name(). If dev_set_name() failed, the rtc_device will memleak. Move devm_add_action_or_reset() in front of dev_set_name() to prevent memleak. unreferenced object 0xffff888110a53000 (size 2048): comm "python3", pid 470, jiffies 4296078308 (age 58.882s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 30 a5 10 81 88 ff ff .........0...... 08 30 a5 10 81 88 ff ff 00 00 00 00 00 00 00 00 .0.............. backtrace: [<000000004aac0364>] kmalloc_trace+0x21/0x110 [<000000000ff02202>] devm_rtc_allocate_device+0xd4/0x400 [<000000001bdf5639>] devm_rtc_device_register+0x1a/0x80 [<00000000351bf81c>] rx4581_probe+0xdd/0x110 [rtc_rx4581] [<00000000f0eba0ae>] spi_probe+0xde/0x130 [<00000000bff89ee8>] really_probe+0x175/0x3f0 [<00000000128e8d84>] __driver_probe_device+0xe6/0x170 [<00000000ee5bf913>] device_driver_attach+0x32/0x80 [<00000000f3f28f92>] bind_store+0x10b/0x1a0 [<000000009ff812d8>] drv_attr_store+0x49/0x70 [<000000008139c323>] sysfs_kf_write+0x8d/0xb0 [<00000000b6146e01>] kernfs_fop_write_iter+0x214/0x2d0 [<00000000ecbe3895>] vfs_write+0x61a/0x7d0 [<00000000aa2196ea>] ksys_write+0xc8/0x190 [<0000000046a600f5>] do_syscall_64+0x37/0x90 [<00000000541a336f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 24d23181 ("rtc: class: check return value when calling dev_set_name()") Signed-off-by:Shang XiaoJing <shangxiaojing@huawei.com> Reviewed-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221110090810.11225-1-shangxiaojing@huawei.comSigned-off-by:
-
Ian Abbott authored
In `ds1347_set_time()`, the wrong value is being written to the `DS1347_CENTURY_REG` register. It needs to be converted to BCD. Fix it. Fixes: 147dae76 ("rtc: ds1347: handle century register") Cc: <stable@vger.kernel.org> # v5.5+ Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/20221027163249.447416-1-abbotti@mev.co.ukSigned-off-by:
-
Christophe JAILLET authored
The kstrto<something>() functions have been moved from kernel.h to kstrtox.h. So, include the latter directly in the appropriate files. Signed-off-by:
-
Rasmus Villemoes authored
The isl12022 has built-in temperature compensation effective over the range -40C to +85C. It exposes the average of the last two temperature measurements as a 10-bit value in half-Kelvins. Make this available via the hwmon framework. Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20221104110225.2219761-1-linux@rasmusvillemoes.dkSigned-off-by:
-
ye xingchen authored
Return the value s35390a_set_reg() directly instead of storing it in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
-
Sebastian Reichel authored
Convert RTC binding for Haoyu Microelectronics HYM8563 to Device Tree Schema format. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
-
Zhang Jianhua authored
The ftm_rtc_driver has been registered while module init, however there is not unregister step for module exit, now use the macro module_platform_driver replace device_initcall, which can register and unregister platform driver automatically. Signed-off-by:
Zhang Jianhua <chris.zjh@huawei.com> Link: https://lore.kernel.org/r/20220906143037.1455317-1-chris.zjh@huawei.comSigned-off-by:
-
Arnd Bergmann authored
The Davinci dm365 SoC support was removed, so the rtc driver has no remaining users. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by:
Marc Zyngier <maz@kernel.org> Acked-by:
Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20221019152947.3857217-9-arnd@kernel.orgSigned-off-by:
-
Yang Yingliang authored
In the probe path, dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. Signed-off-by:
-
Yang Yingliang authored
Remove unnecessary spi_set_drvdata() in ds1302_remove(), the driver_data will be set to NULL in device_unbind_cleanup() after calling ->remove(). After this, ds1302_remove() is an empty function, so remove it too. Signed-off-by:
-
Guenter Roeck authored
RTC chips on some older Chromebooks can only handle alarms less than 24 hours in the future. Attempts to set an alarm beyond that range fails. The most severe impact of this limitation is that suspend requests fail if alarmtimer_suspend() tries to set an alarm for more than 24 hours in the future. Try to set the real-time alarm to just below 24 hours if setting it to a larger value fails to work around the problem. While not perfect, it is better than just failing the call. A similar workaround is already implemented in the rtc-tps6586x driver. Drop error messages in cros_ec_rtc_get() and cros_ec_rtc_set() since the calling code also logs an error and to avoid spurious error messages if setting the alarm ultimately succeeds. Cc: Brian Norris <briannorris@chromium.org> Signed-off-by:
Tzung-Bi Shih <tzungbi@kernel.org> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
-
Neil Armstrong authored
The PM8018 compatible is always used with PM8921 fallback, so PM8018 compatible can be safely removed from device ID table Reviewed-by:
-
Neil Armstrong authored
The PM8018 RTC is used as compatible with PM8921 RTC on the MDM9615, document this situation. Reviewed-by:
-
Yushan Zhou authored
The rzn1_rtc_probe() function utilizes devm_pm_runtime_enable() but wasn't checking the return value. Fix it by adding missing check. Fixes: deeb4b53 ("rtc: rzn1: Add new RTC driver") Signed-off-by:
Yushan Zhou <katrinzhou@tencent.com> Reviewed-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20221107092544.3721053-1-zys.zljxml@gmail.comSigned-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in .probe(). Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221021130706.178687-10-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in .probe(). The device_id array has to move up for that to work. Signed-off-by:
-
