- 12 Apr, 2023 11 commits
-
-
Avri Altman authored
Make sqe_base_addr the UTRD pointer it is, instead of an opaque void *. Signed-off-by:
Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20230329101303.18377-3-avri.altman@wdc.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Avri Altman authored
Allow Sparse and such to know that the hwq lock should be held here. Signed-off-by:
-
Geert Uytterhoeven authored
Fix misspellings of "semaphore". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/d7d04004b818d7ab5d62002f286b0a1b0b493193.1681208251.git.geert+renesas@glider.beSigned-off-by:
-
Jun Chen authored
In lpfc_sli4_pci_mem_unset(), case LPFC_SLI_INTF_IF_TYPE_1 does not have a break statement, resulting in an incorrect device output. Fix this by adding a break statement before the default option. Signed-off-by:
Jun Chen <jun_c@hust.edu.cn> Link: https://lore.kernel.org/r/20230410023724.3209455-1-jun_c@hust.edu.cnReviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Reviewed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
-
Ranjan Kumar authored
Driver uses spin lock without irqsave when it needs to acquire a chain frame. This is done to protect chain frame allocation from multiple submission threads. If there is any I/O queued from an interrupt context, and if that requires a chain frame, and if the chain lock is held by the CPU which got interrupted, then there will be a possible deadlock. Signed-off-by:
Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230406101819.10109-1-ranjan.kumar@broadcom.comSigned-off-by:
-
Harshit Mogalapalli authored
Smatch reports: drivers/scsi/scsi_debug.c:6996 scsi_debug_init() warn: missing error code 'ret' Although it is unlikely that KMEM_CACHE might fail, but if it does then ret might be zero. So to fix this explicitly mark ret as "-ENOMEM" and then goto driver_unreg. Fixes: 1107c7b2 ("scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd") Signed-off-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230406074607.3637097-1-harshit.m.mogalapalli@oracle.comReviewed-by:
John Garry <john.g.garry@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
The suspend/resume functions in this driver seem to have multiple problems, the latest one just got introduced by a bugfix: drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function '_suspend_v3_hw': drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:5142:39: error: 'struct dev_pm_info' has no member named 'usage_count' 5142 | if (atomic_read(&device->power.usage_count)) { drivers/scsi/hisi_sas/hisi_sas_v3_hw.c: In function '_suspend_v3_hw': drivers/scsi/hisi_sas/hisi_sas_v3_hw.c:5142:39: error: 'struct dev_pm_info' has no member named 'usage_count' 5142 | if (atomic_read(&device->power.usage_count)) { As far as I can tell, the 'usage_count' is not meant to be accessed by device drivers at all, though I don't know what the driver is supposed to do instead. Another problem is the use of the deprecated UNIVERSAL_DEV_PM_OPS(), and marking functions as __maybe_unused to avoid warnings about unused functions. This should probably be changed to using DEFINE_RUNTIME_DEV_PM_OPS(). Both changes require actually understanding what the driver needs to do, and being able to test this, so instead here is the simplest patch to make it pass the randconfig builds instead. Fixes: e368d38c ("scsi: hisi_sas: Exit suspend state when usage count is greater than 0") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230405083611.3376739-1-arnd@kernel.orgReviewed-by:
Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by:
-
Shuchang Li authored
When if_type equals zero and pci_resource_start(pdev, PCI_64BIT_BAR4) returns false, drbl_regs_memmap_p is not remapped. This passes a NULL pointer to iounmap(), which can trigger a WARN() on certain arches. When if_type equals six and pci_resource_start(pdev, PCI_64BIT_BAR4) returns true, drbl_regs_memmap_p may has been remapped and ctrl_regs_memmap_p is not remapped. This is a resource leak and passes a NULL pointer to iounmap(). To fix these issues, we need to add null checks before iounmap(), and change some goto labels. Fixes: 1351e69f ("scsi: lpfc: Add push-to-adapter support to sli4") Signed-off-by:
Shuchang Li <lishuchang@hust.edu.cn> Link: https://lore.kernel.org/r/20230404072133.1022-1-lishuchang@hust.edu.cnReviewed-by:
-
Tomas Henzl authored
Warnings may be logged during driver removal: mpt3sas 0000:01:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT .., Fix this by deallocating DMA memory later. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Link: https://lore.kernel.org/r/20230403184736.6399-1-thenzl@redhat.comSigned-off-by:
-
Ranjan Kumar authored
This is done to avoid ambiguity between BIOS and UEFI versions. Management tools can be used for getting accurate firmware version information. Signed-off-by:
-
Maurizio Lombardi authored
nr_attrs should start counting from zero, otherwise we will end up dereferencing an invalid memory address. $ targetcli /loopback create general protection fault RIP: 0010:configfs_create_file+0x12/0x70 Call Trace: <TASK> configfs_attach_item.part.0+0x5f/0x150 configfs_attach_group.isra.0+0x49/0x120 configfs_mkdir+0x24f/0x4d0 vfs_mkdir+0x192/0x240 do_mkdirat+0x131/0x160 __x64_sys_mkdir+0x48/0x70 do_syscall_64+0x5c/0x90 Fixes: 31177b74 ("scsi: target: core: Add RTPI attribute for target port") Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20230407130033.556644-1-mlombard@redhat.comAcked-by:
Dmitry Bogdanov <d.bogdanov@yadro.com> Reviewed-by:
Mike Christie <michael.christie@oracle.com> Signed-off-by:
-
- 03 Apr, 2023 26 commits
-
-
Martin K. Petersen authored
John Garry <john.g.garry@oracle.com> says: It's easy to get scsi_debug to error on throughput testing when we have multiple shosts: $ lsscsi [7:0:0:0] disk Linux scsi_debug 0191 [0:0:0:0] disk Linux scsi_debug 0191 $ fio --filename=/dev/sda --filename=/dev/sdb --direct=1 --rw=read --bs=4k --iodepth=256 --runtime=60 --numjobs=40 --time_based --name=jpg --eta-newline=1 --readonly --ioengine=io_uring --hipri --exitall_on_error jpg: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256 ... fio-3.28 Starting 40 processes [ 27.521809] hrtimer: interrupt took 33067 ns [ 27.904660] sd 7:0:0:0: [sdb] tag#171 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s [ 27.904660] sd 0:0:0:0: [sda] tag#58 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s fio: io_u error [ 27.904667] sd 0:0:0:0: [sda] tag#58 CDB: Read(10) 28 00 00 00 27 00 00 01 18 00 on file /dev/sda[ 27.904670] sd 0:0:0:0: [sda] tag#62 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s The issue is related to how the driver manages submit queues and tags. A single array of submit queues - sdebug_q_arr - with its own set of tags is shared among all shosts. As such, for occasions when we have more than one host it is possible to overload the submit queues and run out of tags. Another separate issue that we may reduce the shost submit queue depth, sdebug_max_queue, dynamically causing the shost to be overloaded. How many IOs which the shost may be sent is fixed at can_queue at init time, which is the same initial value for sdebug_max_queue. So reducing sdebug_max_queue means that the shost may be sent more IOs than it is configured to handle, causing overloading. This series removes the scsi_debug submit queue concept and uses pre-existing APIs to manage and examine tags, like scsi_block_requests() and blk_mq_tagset_busy_iter(). Using standard APIs makes the driver more maintainable and extensible in future. A restriction is also added to allow sdebug_max_queue only be modified when no shosts are present, i.e. we need to remove shosts, modify sdebug_max_queue, and then re-add the shosts. Link: https://lore.kernel.org/r/20230327074310.1862889-1-john.g.garry@oracle.comSigned-off-by:
-
John Garry authored
It's easy to get scsi_debug to error on throughput testing when we have multiple shosts: $ lsscsi [7:0:0:0] disk Linux scsi_debug 0191 [0:0:0:0] disk Linux scsi_debug 0191 $ fio --filename=/dev/sda --filename=/dev/sdb --direct=1 --rw=read --bs=4k --iodepth=256 --runtime=60 --numjobs=40 --time_based --name=jpg --eta-newline=1 --readonly --ioengine=io_uring --hipri --exitall_on_error jpg: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256 ... fio-3.28 Starting 40 processes [ 27.521809] hrtimer: interrupt took 33067 ns [ 27.904660] sd 7:0:0:0: [sdb] tag#171 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s [ 27.904660] sd 0:0:0:0: [sda] tag#58 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s fio: io_u error [ 27.904667] sd 0:0:0:0: [sda] tag#58 CDB: Read(10) 28 00 00 00 27 00 00 01 18 00 on file /dev/sda[ 27.904670] sd 0:0:0:0: [sda] tag#62 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s The issue is related to how the driver manages submit queues and tags. A single array of submit queues - sdebug_q_arr - with its own set of tags is shared among all shosts. As such, for occasions when we have more than one shost it is possible to overload the submit queues and run out of tags. The struct sdebug_queue is to manage tags and hold the associated queued command entry pointer (for that tag). Since the tagset iters are now used for functions like sdebug_blk_mq_poll(), there is no need to manage these queues. Indeed, blk-mq already provides what we need for managing tags and queues. Drop sdebug_queue and all its usage in the driver. Signed-off-by:
-
John Garry authored
The shost->can_queue value is initially used to set per-HW queue context tag depth in the block layer. This ensures that the shost is not sent too many commands which it can deal with. However lowering sdebug_max_queue separately means that we can easily overload the shost, as in the following example: $ cat /sys/bus/pseudo/drivers/scsi_debug/max_queue 192 $ cat /sys/class/scsi_host/host0/can_queue 192 $ echo 100 > /sys/bus/pseudo/drivers/scsi_debug/max_queue $ cat /sys/class/scsi_host/host0/can_queue 192 $ fio --filename=/dev/sda --direct=1 --rw=read --bs=4k --iodepth=256 --runtime=1200 --numjobs=10 --time_based --group_reporting --name=iops-test-job --eta-newline=1 --readonly --ioengine=io_uring --hipri --exitall_on_error iops-test-job: (g=0): rw=read, bs=(R) 4096B-4096B, (W) 4096B-4096B, (T) 4096B-4096B, ioengine=io_uring, iodepth=256 ... fio-3.28 Starting 10 processes [ 111.269885] scsi_io_completion_action: 400 callbacks suppressed [ 111.269885] blk_print_req_error: 400 callbacks suppressed [ 111.269889] I/O error, dev sda, sector 440 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2 [ 111.269892] sd 0:0:0:0: [sda] tag#132 FAILED Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK cmd_age=0s [ 111.269897] sd 0:0:0:0: [sda] tag#132 CDB: Read(10) 28 00 00 00 01 68 00 00 08 00 [ 111.277058] I/O error, dev sda, sector 360 op 0x0:(READ) flags 0x1200000 phys_seg 1 prio class 2 [...] Ensure that this cannot happen by allowing sdebug_max_queue be modified only when we have no shosts. As such, any shost->can_queue value will match sdebug_max_queue, and sdebug_max_queue cannot be modified separately. Since retired_max_queue is no longer set, remove support. Continue to apply the restriction that sdebug_host_max_queue cannot be modified when sdebug_host_max_queue is set. Adding support for that would mean extra code, and no one has complained about this restriction previously. A command like the following may be used to remove a shost: echo -1 > /sys/bus/pseudo/drivers/scsi_debug/add_host Signed-off-by:
-
John Garry authored
The functions to update ndelay and delay value first check whether we have any in-flight IO for any host. It does this by checking if any tag is used in the global submit queues. We can achieve the same by setting the host as blocked and then ensuring that we have no in-flight commands with scsi_host_busy(). Note that scsi_host_busy() checks SCMD_STATE_INFLIGHT flag, which is only set per command after we ensure that the host is not blocked, i.e. we see more commands active after the check for scsi_host_busy() returns 0. Signed-off-by:
-
John Garry authored
Instead of iterating all deferred commands in the submission queue structures, use blk_mq_tagset_busy_iter(), which is a standard API for this. Signed-off-by:
-
John Garry authored
Instead of iterating all deferred commands in the submission queue structures, use blk_mq_tagset_busy_iter(), which is a standard API for this. Signed-off-by:
-
John Garry authored
Eventually we will drop the sdebug_queue struct as it is not really required, so start with making the sdebug_queued_cmd dynamically allocated for the lifetime of the scsi_cmnd in the driver. As an interim measure, make sdebug_queued_cmd.sd_dp a pointer to struct sdebug_defer. Also keep a value of the index allocated in sdebug_queued_cmd.qc_arr in struct sdebug_queued_cmd. To deal with an races in accessing the scsi cmnd allocated struct sdebug_queued_cmd, add a spinlock for the scsi command in its priv area. Races may be between scheduling a command for completion, aborting a command, and the command actually completing and freeing the struct sdebug_queued_cmd. [mkp: typo fix] Signed-off-by:
-
John Garry authored
The feature to block queues is quite dubious, since it races with in-flight IO. Indeed, it seems unnecessary for block queues for any times we do so. Anyway, to keep the same behaviour, use standard SCSI API to stop IO being sent - scsi_{un}block_requests(). Signed-off-by: -
John Garry authored
There is no reason that calls to block_unblock_all_queues() from different context can't race with one another, so protect with the sdebug_host_list_mutex. There's no need for a more fine-grained per shost locking here (and we don't have a per-host lock anyway). Also simplify some touched code in sdebug_change_qdepth(). Signed-off-by:
-
John Garry authored
The shost list lock, sdebug_host_list_lock, is a spinlock. We would only lock in non-atomic context in this driver, so use a mutex instead, which is friendlier if we need to schedule when iterating. Signed-off-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
John Garry authored
In clear_luns_changed_on_target(), we iter all devices for all shosts to conditionally clear the SDEBUG_UA_LUNS_CHANGED flag in the per-device uas_bm. One condition to see whether we clear the flag is to test whether the host for the device under consideration is the same as the matching device's (devip) host. This check will only ever pass for devices for the same shost, so only iter the devices for the matching device shost. We can now drop the spinlock'ing of the sdebug_host_list_lock in the same function. This will allow us to use a mutex instead of the spinlock for the global shost lock, as clear_luns_changed_on_target() could be called in non-blocking context, in scsi_debug_queuecommand() -> make_ua() -> clear_luns_changed_on_target() (which is why required a spinlock). Signed-off-by:
-
John Garry authored
There is a report that the blktests scsi/004 test for "TASK SET FULL" (TSF) now fails. The condition upon we should issue this TSF is when the sdev queue is full. The check for a full queue has an off-by-1 error. Previously we would increment the number of requests in the queue after testing if the queue would be full, i.e. test if one less than full. Since we now use scsi_device_busy() to count the number of requests in the queue, this would already account for the current request, so fix the test for queue full accordingly. Fixes: 151f0ec9 ("scsi: scsi_debug: Drop sdebug_dev_info.num_in_q") Reported-by:
kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/oe-lkp/202303201334.18b30edc-oliver.sang@intel.comSigned-off-by:
Yi Zhang <yi.zhang@redhat.com> Signed-off-by:
-
Martin K. Petersen authored
chenxiang <chenxiang66@hisilicon.com> says: This series contain some fixes including: - Grab sas_dev lock when traversing sas_dev list to avoid NULL pointer - Handle NCQ error when IPTT is valid - Ensure all enabled PHYs up during controller reset - Exit suspend state when usage count of runtime PM is greater than 0 https://lore.kernel.org/r/1679283265-115066-1-git-send-email-chenxiang66@hisilicon.comSigned-off-by:
-
Yihang Li authored
When the current status of the host controller is suspended, enabling a local PHY just after disabling all local PHYs in expander environment, a hang as follows occurs: [ 486.854655] INFO: task kworker/u256:1:899 blocked for more than 120 seconds. [ 486.862207] Not tainted 6.1.0-rc4+ #1 [ 486.870545] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 486.878893] task:kworker/u256:1 state:D stack:0 pid:899 ppid:2 flags:0x00000008 [ 486.887745] Workqueue: 0000:74:02.0_disco_q sas_discover_domain [libsas] [ 486.894704] Call trace: [ 486.897400] __switch_to+0xf0/0x170 [ 486.901146] __schedule+0x3e4/0x1160 [ 486.904970] schedule+0x64/0x104 [ 486.908442] rpm_resume+0x158/0x6a0 [ 486.912163] __pm_runtime_resume+0x5c/0x84 [ 486.916489] smp_execute_task_sg+0x1f8/0x264 [libsas] [ 486.921773] sas_discover_expander.part.0+0xbc/0x720 [libsas] [ 486.927750] sas_discover_root_expander+0x90/0x154 [libsas] [ 486.933552] sas_discover_domain+0x444/0x6d0 [libsas] [ 486.938826] process_one_work+0x1e0/0x450 [ 486.943057] worker_thread+0x150/0x44c [ 486.947015] kthread+0x114/0x120 [ 486.950447] ret_from_fork+0x10/0x20 [ 486.954292] INFO: task kworker/u256:2:1780 blocked for more than 120 seconds. [ 486.961637] Not tainted 6.1.0-rc4+ #1 [ 486.966087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 486.974356] task:kworker/u256:2 state:D stack:0 pid:1780 ppid:2 flags:0x00000208 [ 486.983141] Workqueue: 0000:74:02.0_event_q sas_port_event_worker [libsas] [ 486.990252] Call trace: [ 486.992930] __switch_to+0xf0/0x170 [ 486.996645] __schedule+0x3e4/0x1160 [ 487.000439] schedule+0x64/0x104 [ 487.003886] schedule_timeout+0x17c/0x1c0 [ 487.008102] wait_for_completion+0x7c/0x160 [ 487.012488] __flush_workqueue+0x104/0x3e0 [ 487.016782] sas_porte_bytes_dmaed+0x414/0x454 [libsas] [ 487.022203] sas_port_event_worker+0x38/0x60 [libsas] [ 487.027449] process_one_work+0x1e0/0x450 [ 487.031645] worker_thread+0x150/0x44c [ 487.035594] kthread+0x114/0x120 [ 487.039017] ret_from_fork+0x10/0x20 [ 487.042828] INFO: task bash:11488 blocked for more than 121 seconds. [ 487.049366] Not tainted 6.1.0-rc4+ #1 [ 487.053746] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 487.061953] task:bash state:D stack:0 pid:11488 ppid:10977 flags:0x00000204 [ 487.070698] Call trace: [ 487.073355] __switch_to+0xf0/0x170 [ 487.077050] __schedule+0x3e4/0x1160 [ 487.080833] schedule+0x64/0x104 [ 487.084270] schedule_timeout+0x17c/0x1c0 [ 487.088474] wait_for_completion+0x7c/0x160 [ 487.092851] __flush_workqueue+0x104/0x3e0 [ 487.097137] drain_workqueue+0xb8/0x160 [ 487.101159] __sas_drain_work+0x50/0x90 [libsas] [ 487.105963] sas_suspend_ha+0x64/0xd4 [libsas] [ 487.110590] suspend_v3_hw+0x198/0x1e8 [hisi_sas_v3_hw] [ 487.115989] pci_pm_runtime_suspend+0x5c/0x1d0 [ 487.120606] __rpm_callback+0x50/0x150 [ 487.124535] rpm_callback+0x74/0x80 [ 487.128204] rpm_suspend+0x110/0x640 [ 487.131955] rpm_idle+0x1f4/0x2d0 [ 487.135447] __pm_runtime_idle+0x58/0x94 [ 487.139538] queue_phy_enable+0xcc/0xf0 [libsas] [ 487.144330] store_sas_phy_enable+0x74/0x100 [ 487.148770] dev_attr_store+0x20/0x34 [ 487.152606] sysfs_kf_write+0x4c/0x5c [ 487.156437] kernfs_fop_write_iter+0x120/0x1b0 [ 487.161049] vfs_write+0x2d0/0x36c [ 487.164625] ksys_write+0x70/0x100 [ 487.168194] __arm64_sys_write+0x24/0x30 [ 487.172280] invoke_syscall+0x50/0x120 [ 487.176186] el0_svc_common.constprop.0+0x168/0x190 [ 487.181214] do_el0_svc+0x34/0xc0 [ 487.184680] el0_svc+0x2c/0xb4 [ 487.187879] el0t_64_sync_handler+0xb8/0xbc [ 487.192205] el0t_64_sync+0x19c/0x1a0 We find that when all local PHYs are disabled, all the devices will be removed, the ->runtime_suspend() callback suspend_v3_hw() directly execute since the controller usage count drop to 0. On the other side, the first local PHY is enabled through the sysfs interface, and ensures that function phy_up_v3_hw() is completed due to suspend_v3_hw()-> interrupt_disable_v3_hw(). In the expander scenario, sas_discover_root_expander() is executed in event work DISCE_DISCOVER_DOMAIN, which will increases the controller usage count and carry out a resume and sends SMPIO, it cannot be completed because the runtime PM status of the controller is RPM_SUSPENDING. At the same time, the ->runtime_suspend() callback suspend_v3_hw() also cannot complete the process because of drain libsas event queue in sas_suspend_ha(), so hung occurs. (thread 1) | (thread 2) ... | rpm_idle() | ... | __update_runtime_status(RPM_SUSPENDING)| ... | ... suspend_v3_hw() | smp_execute_task_sg() ... | ... interrupt_disable_v3_hw() | pm_runtime_get_sync() | ... ... | rpm_resume() //RPM_SUSPENDING | __sas_drain_work() | To fix this, check if the current runtime PM status of the controller allows to be suspended continue after interrupt_disable_v3_hw(), return immediately if not. Signed-off-by:Yihang Li <liyihang9@huawei.com> Signed-off-by:
Xiang Chen <chenxiang66@hislicon.com> Link: https://lore.kernel.org/r/1679283265-115066-5-git-send-email-chenxiang66@hisilicon.comSigned-off-by:
-
Yihang Li authored
For the controller reset operation, hisi_sas_phy_enable() is executed for each enabled local PHY, and refresh the port id of each device based on the latest hisi_sas_phy->port_id after 1 second sleep, hisi_sas_phy->port_id is configured in the interrupt processing function phy_up_v3_hw(). However, in directly attached scenario, for some SATA disks the amount of time for phyup more than 1s sometimes. In this case, incorrect port id may be configured in hisi_sas_refresh_port_id(). As a result, all the internal IOs fail and disk lost, such as follows: [10717.666565] hisi_sas_v3_hw 0000:74:02.0: phyup: phy1 link_rate=10(sata) [10718.826813] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=63 task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc8003f 0x0 0x0 Error info: 0x0 0x0 0x0 0x0 [10718.843428] sas: TMF task open reject failed 5000000000000501 [10718.849242] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=64 task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80040 0x0 0x0 Error info: 0x0 0x0 0x0 0x0 [10718.865856] sas: TMF task open reject failed 5000000000000501 [10718.871670] hisi_sas_v3_hw 0000:74:02.0: erroneous completion iptt=65 task=00000000c1ab1c2b dev id=200 addr=5000000000000501 CQ hdr: 0x8000007 0xc80041 0x0 0x0 Error info: 0x0 0x0 0x0 0x0 [10718.888284] sas: TMF task open reject failed 5000000000000501 [10718.894093] sas: executing TMF for 5000000000000501 failed after 3 attempts! [10718.901114] hisi_sas_v3_hw 0000:74:02.0: ata disk 5000000000000501 reset failed [10718.908410] hisi_sas_v3_hw 0000:74:02.0: controller reset complete ..... [10773.298633] ata216.00: revalidation failed (errno=-19) [10773.303753] ata216.00: disable device So the time of waitting for PHYs up is 1s which may be not enough. To solve the issue, running hisi_sas_phy_enable() in parallel through async operations and use wait_for_completion_timeout() to wait for PHYs come up instead of directly sleep for 1 second. Signed-off-by:
-
Xingui Yang authored
If an NCQ error occurs when the IPTT is valid and slot->abort flag is set in completion path, sas_task_abort() will be called to abort only one NCQ command now, and the host would be set to SHOST_RECOVERY state. But this may not kick-off EH Immediately until other outstanding QCs timeouts. As a result, the host may remain in the SHOST_RECOVERY state for up to 30 seconds, such as follows: [7972317.645234] hisi_sas_v3_hw 0000:74:04.0: erroneous completion iptt=3264 task=00000000466116b8 dev id=2 sas_addr=0x5000000000000502 CQ hdr: 0x1883 0x20cc0 0x40000 0x20420000 Error info: 0x0 0x0 0x200000 0x0 [7972341.508264] sas: Enter sas_scsi_recover_host busy: 32 failed: 32 [7972341.984731] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 32 tries: 1 All NCQ commands that are in the queue should be aborted when an NCQ error occurs in this scenario. Fixes: 05d91b55 ("scsi: hisi_sas: Directly trigger SCSI error handling for completion errors") Signed-off-by:
Xingui Yang <yangxingui@huawei.com> Signed-off-by:
-
Xingui Yang authored
When freeing slots in function slot_complete_v3_hw(), it is possible that sas_dev.list is being traversed elsewhere, and it may trigger a NULL pointer exception, such as follows: ==>cq thread ==>scsi_eh_6 ==>scsi_error_handler() ==>sas_eh_handle_sas_errors() ==>sas_scsi_find_task() ==>lldd_abort_task() ==>slot_complete_v3_hw() ==>hisi_sas_abort_task() ==>hisi_sas_slot_task_free() ==>dereg_device_v3_hw() ==>list_del_init() ==>list_for_each_entry_safe() [ 7165.434918] sas: Enter sas_scsi_recover_host busy: 32 failed: 32 [ 7165.434926] sas: trying to find task 0x00000000769b5ba5 [ 7165.434927] sas: sas_scsi_find_task: aborting task 0x00000000769b5ba5 [ 7165.434940] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000769b5ba5) aborted [ 7165.434964] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000c9f7aa07) ignored [ 7165.434965] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(00000000e2a1cf01) ignored [ 7165.434968] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 7165.434972] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000022d52d93) ignored [ 7165.434975] hisi_sas_v3_hw 0000:b4:02.0: slot complete: task(0000000066a7516c) ignored [ 7165.434976] Mem abort info: [ 7165.434982] ESR = 0x96000004 [ 7165.434991] Exception class = DABT (current EL), IL = 32 bits [ 7165.434992] SET = 0, FnV = 0 [ 7165.434993] EA = 0, S1PTW = 0 [ 7165.434994] Data abort info: [ 7165.434994] ISV = 0, ISS = 0x00000004 [ 7165.434995] CM = 0, WnR = 0 [ 7165.434997] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f29543f2 [ 7165.434998] [0000000000000000] pgd=0000000000000000 [ 7165.435003] Internal error: Oops: 96000004 [#1] SMP [ 7165.439863] Process scsi_eh_6 (pid: 4109, stack limit = 0x00000000c43818d5) [ 7165.468862] pstate: 00c00009 (nzcv daif +PAN +UAO) [ 7165.473637] pc : dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.479443] lr : dereg_device_v3_hw+0x2c/0xa8 [hisi_sas_v3_hw] [ 7165.485247] sp : ffff00001d623bc0 [ 7165.488546] x29: ffff00001d623bc0 x28: ffffa027d03b9508 [ 7165.493835] x27: ffff80278ed50af0 x26: ffffa027dd31e0a8 [ 7165.499123] x25: ffffa027d9b27f88 x24: ffffa027d9b209f8 [ 7165.504411] x23: ffffa027c45b0d60 x22: ffff80278ec07c00 [ 7165.509700] x21: 0000000000000008 x20: ffffa027d9b209f8 [ 7165.514988] x19: ffffa027d9b27f88 x18: ffffffffffffffff [ 7165.520276] x17: 0000000000000000 x16: 0000000000000000 [ 7165.525564] x15: ffff0000091d9708 x14: ffff0000093b7dc8 [ 7165.530852] x13: ffff0000093b7a23 x12: 6e7265746e692067 [ 7165.536140] x11: 0000000000000000 x10: 0000000000000bb0 [ 7165.541429] x9 : ffff00001d6238f0 x8 : ffffa027d877af00 [ 7165.546718] x7 : ffffa027d6329600 x6 : ffff7e809f58ca00 [ 7165.552006] x5 : 0000000000001f8a x4 : 000000000000088e [ 7165.557295] x3 : ffffa027d9b27fa8 x2 : 0000000000000000 [ 7165.562583] x1 : 0000000000000000 x0 : 000000003000188e [ 7165.567872] Call trace: [ 7165.570309] dereg_device_v3_hw+0x68/0xa8 [hisi_sas_v3_hw] [ 7165.575775] hisi_sas_abort_task+0x248/0x358 [hisi_sas_main] [ 7165.581415] sas_eh_handle_sas_errors+0x258/0x8e0 [libsas] [ 7165.586876] sas_scsi_recover_host+0x134/0x458 [libsas] [ 7165.592082] scsi_error_handler+0xb4/0x488 [ 7165.596163] kthread+0x134/0x138 [ 7165.599380] ret_from_fork+0x10/0x18 [ 7165.602940] Code: d5033e9f b9000040 aa0103e2 eb03003f (f9400021) [ 7165.609004] kernel fault(0x1) notification starting on CPU 75 [ 7165.700728] ---[ end trace fc042cbbea224efc ]--- [ 7165.705326] Kernel panic - not syncing: Fatal exception To fix the issue, grab sas_dev lock when traversing the members of sas_dev.list in dereg_device_v3_hw() and hisi_sas_release_tasks() to avoid concurrency of adding and deleting member. When function hisi_sas_release_tasks() calls hisi_sas_do_release_task() to free slot, the lock cannot be grabbed again in hisi_sas_slot_task_free(), then a bool parameter need_lock is added. Signed-off-by: -
Tom Rix authored
clang with W=1 reports: drivers/scsi/qla4xxx/ql4_isr.c:475:11: error: variable 'count' set but not used [-Werror,-Wunused-but-set-variable] uint32_t count = 0; ^ This variable is not used so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230331175757.1860780-1-trix@redhat.comSigned-off-by:
-
Tom Rix authored
clang with W=1 reports: drivers/scsi/snic/snic_scsi.c:490:6: error: variable 'xfer_len' set but not used [-Werror,-Wunused-but-set-variable] u64 xfer_len = 0; ^ This variable is not used so remove it. Signed-off-by: -
Tom Rix authored
clang with W=1 reports: drivers/scsi/qedf/qedf_main.c:2227:6: error: variable 'num_handled' set but not used [-Werror,-Wunused-but-set-variable] int num_handled = 0; ^ This variable is not used so remove it. Signed-off-by: -
Adrian Hunter authored
Add PCI ID to support Intel Lunar Lake, same as MTL. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20230328105832.3495-1-adrian.hunter@intel.comSigned-off-by:
-
Tom Rix authored
clang with W=1 reports: drivers/scsi/scsi_transport_fc.c:908:6: error: variable 'desc_cnt' set but not used [-Werror,-Wunused-but-set-variable] u32 desc_cnt = 0, bytes_remain; ^ This variable is not used so remove it. Signed-off-by:Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Enze Li authored
Simplify the sr_open() by removing the goto label as the function only returns one error code. Signed-off-by:
Enze Li <lienze@kylinos.cn> Link: https://lore.kernel.org/r/20230327030237.3407253-1-lienze@kylinos.cnReviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Tom Rix authored
clang with W=1 reports: drivers/target/target_core_spc.c:229:6: error: variable 'prod_len' set but not used [-Werror,-Wunused-but-set-variable] u32 prod_len; ^ This variable is not used so remove it. Signed-off-by:Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by:
-
Jason Yan authored
When a disk is removed with in-flight I/O, the application needs to wait for 30 seconds (depending on the timeout configuration) to hear back from the kernel. Xingui tried to fix this issue by aborting the ATA link for SATA devices[1], however this approach left the SAS devices unresolved. Try to fix this issue by aborting all in-flight requests when the device is gone. This is implemented by iterating over the tagset. [1] https://lore.kernel.org/lkml/234e04db-7539-07e4-a6b8-c6b05f78193d@opensource.wdc.com/T/ Cc: Xingui Yang <yangxingui@huawei.com> Cc: John Garry <john.g.garry@oracle.com> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230330110930.175539-1-yanaijie@huawei.comReviewed-by:
-
Stanley Chu authored
The "is_valid" field of the struct ufs_saved_pwr_info is no longer used, and this struct can be replaced by struct ufs_pa_layer_attr without any changes to the functionality. Signed-off-by:
Stanley Chu <stanley.chu@mediatek.com> Link: https://lore.kernel.org/r/20230330012918.13748-1-stanley.chu@mediatek.comReviewed-by:
-
- 01 Apr, 2023 1 commit
-
-
Martin K. Petersen authored
Pull in the fixes branch to resolve an mpi3mr conflict reported by sfr. Signed-off-by:
-
- 25 Mar, 2023 2 commits
-
-
Jerry Snitselaar authored
_base_allocate_sense_dma_pool() already prints out the sense pool information, so don't print it a second time after calling it in _base_allocate_memory_pools(). In addition the version in _base_allocate_memory_pools() was using the wrong size value, sz, which was last assigned when doing some nvme calculations instead of sense_sz to determine the pool size in kilobytes. Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: MPT-FusionLinux.pdl@broadcom.com Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Fixes: 970ac2bb ("scsi: mpt3sas: Force sense buffer allocations to be within same 4 GB region") Signed-off-by:
Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20230324193204.567932-1-jsnitsel@redhat.comSigned-off-by:
-
Damien Le Moal authored
Some USB-SATA adapters have broken behavior when an unsupported VPD page is probed: Depending on the VPD page number, a 4-byte header with a valid VPD page number but with a 0 length is returned. Currently, scsi_vpd_inquiry() only checks that the page number is valid to determine if the page is valid, which results in receiving only the 4-byte header for the non-existent page. This error manifests itself very often with page 0xb9 for the Concurrent Positioning Ranges detection done by sd_read_cpr(), resulting in the following error message: sd 0:0:0:0: [sda] Invalid Concurrent Positioning Ranges VPD page Prevent such misleading error message by adding a check in scsi_vpd_inquiry() to verify that the page length is not 0. Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20230322022211.116327-1-damien.lemoal@opensource.wdc.comReviewed-by:
-
