- 30 Jun, 2022 2 commits
-
-
Mark Brown authored
Merge series from Stephan Gerhold <stephan.gerhold@kernkonzept.com>: Fix the voltage range for the pm8916_pldo in the qcom_smd-regulator driver and add definitions for the regulators available in PM8909.
-
Liang He authored
In scmi_regulator_probe(), of_find_node_by_name() will decrease the refcount of its first argument and we need a of_node_get() to keep reference balance. Signed-off-by: Liang He <windhl@126.com> Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20220622034816.4094043-1-windhl@126.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 29 Jun, 2022 5 commits
-
-
Stephan Gerhold authored
The set of regulators available in the PM8909 PMIC is similar to PM8916 which is already supported by the driver. s3, s4 and l16 are missing. However, probing the SPMI hardware identification registers using the qcom_spmi-regulator driver reveals that the regulators in PM8909 are actually some kind of mixture between PM8916 and PM8226: - ult_lo_smps (= pm8916_buck_lvo_smps): s1 - ult_ho_smps (= pm8916_buck_hvo_smps): s2 - ult_nldo (= pm8916_nldo): l1, l2, l3, l10 - ult_pldo (= pm8916_pldo): l4, l8, l9, l12-l15, l17, l18 - pldo (= pm8226_pldo): l5, l6, l7, l11 Use this mapping to add the rpm_regulator_data for PM8909 by reusing the existing regulator definitions. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Link: https://lore.kernel.org/r/20220623094614.1410180-4-stephan.gerhold@kernkonzept.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Stephan Gerhold authored
Document the "qcom,rpm-pm8909-regulators" compatible for describing the regulators available in the PM8909 PMIC (controlled via the RPM firmware). PM8909 is very similar to the existing PM8916 but lacks 3 of the regulators (s3, s4 and l16). Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220623094614.1410180-3-stephan.gerhold@kernkonzept.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Stephan Gerhold authored
The PM8916 device specification [1] documents a programmable range of 1.75V to 3.337V with 12.5mV steps for the PMOS LDOs in PM8916. This range is also used when controlling the regulator directly using the qcom_spmi-regulator driver ("ult_pldo" there). However, for some reason the qcom_smd-regulator driver allows a much larger range for the same hardware component. This could be simply a typo, since the start of the range is essentially just missing a '1'. In practice this does not cause any major problems, since the driver just sends the actual voltage to the RPM firmware instead of making use of the incorrect voltage selector. Still, having the wrong range there is confusing and prevents the regulator core from validating requests correctly. [1]: https://developer.qualcomm.com/download/sd410/pm8916pm8916-1-power-management-ic-device-specification.pdf Fixes: 57d65676 ("regulator: qcom-smd: Add PM8916 support") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Link: https://lore.kernel.org/r/20220623094614.1410180-2-stephan.gerhold@kernkonzept.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
'platform_device_id' struct is defined in 'mod_devicetable.h'. Even 'of.h' also includes this header usage. The 'of.h' cannot be removed due to 'of_match_ptr' function. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/1656466861-7737-2-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
From the common binding, 'enable-gpio' or 'enable-gpios' are all well for external 'enable' gpio. 'gpiod_get_from_of_node' only parse the 'enable' property, it need to add the gpio suffix. It's more convenient to use fwnode_gpiod_get_index. Although fwnode parsing is not preferred, but 'of_parse_cb' already can guarantee the callback will only be used by regulator of_node parsing. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1656466861-7737-1-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 28 Jun, 2022 1 commit
-
-
Mauro Carvalho Chehab authored
document n_ramp_values field at struct regulator_desc, in order to solve this warning: include/linux/regulator/driver.h:434: warning: Function parameter or member 'n_ramp_values' not described in 'regulator_desc' Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/15efc16e878aa327aa2769023bcdf959a795f41d.1656409369.git.mchehab@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 23 Jun, 2022 2 commits
-
-
ChiYuan Huang authored
Add mt6370 DisplayBias and VibLDO support. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/20220623115631.22209-10-peterwu.pub@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
Add RT5120 PMIC regulator support. It integrates 4 buck convertes, 1 LDO voltage regulator, 1 external enable signal to control the external power source. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1655892104-10874-4-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 13 Jun, 2022 1 commit
-
-
Stephen Kitt authored
backlight_properties.fb_blank is deprecated. The states it represents are handled by other properties; but instead of accessing those properties directly, drivers should use the helpers provided by backlight.h. Instead of retrieving the backlight brightness in struct backlight_properties manually, and then checking whether the backlight should be on at all, use backlight_get_brightness() which does all this and insulates this from future changes. Signed-off-by: Stephen Kitt <steve@sk2.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220607185304.1128962-1-steve@sk2.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 07 Jun, 2022 4 commits
-
-
Robert Marko authored
Add the get_voltage OP to MP5496 ops using the generic rpm_reg_get_voltage. Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20220604193300.125758-1-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Robert Marko authored
Currently set MP5496 Buck and LDO ranges dont match its datasheet[1]. According to the datasheet: Buck range is 0.6-2.1875V with a 12.5mV step LDO range is 0.8-3.975V with a 25mV step. So, correct the ranges according to the datasheet[1]. [1] https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP5496GR/document_id/6906/Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20220604193300.125758-2-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Robert Marko authored
Driver does not seem to utilize anything from the kernel.h, compiles and works fine for me without it. So remove kernel.h include as it pulls in a lot of unused stuff. Signed-off-by: Robert Marko <robimarko@gmail.com> Cc: christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/20220607124759.775133-1-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Rob Herring authored
Convert the pwm-regulator binding to DT schema format. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220606184310.1057797-1-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Jun, 2022 8 commits
-
-
ChiYuan Huang authored
If the node for the match name cannot be found, 'of_regulator_match' will returns init_data as NULL for this regulator. Add the check for the init_data. If it's NULL, make 'rt5190a_of_parse_cb' function directly return. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1654148646-12182-1-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Robert Marko authored
MP5496 is the updated version of MP5416 with the only difference being that now all Buck regulators have the same 0.6-2.1875V range with a 12.5mV step. Signed-off-by: Robert Marko <robimarko@gmail.com> Acked-by: Saravanan Sekar <sravanhome@gmail.com> Link: https://lore.kernel.org/r/20220604145816.47576-4-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Robert Marko authored
In preparation for adding support for MP5496 which slightly differs from MP5416 convert the driver to use OF match data instead of always using the MP5416 regulator_desc for regulator registration. Signed-off-by: Robert Marko <robimarko@gmail.com> Acked-by: Saravanan Sekar <sravanhome@gmail.com> Link: https://lore.kernel.org/r/20220604145816.47576-3-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Robert Marko authored
Sort the header include list alphabetically. Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20220604145816.47576-2-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Robert Marko authored
MP5496 is the updated version of MP5416 with the only difference being that now all Buck regulators have the same 0.6-2.1875V range with a 12.5mV step. Since there is no way to differentiate them other than using compatibles, add compatible for the MP5496. Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20220604145816.47576-1-robimarko@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
-
- 05 Jun, 2022 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
-
Linus Torvalds authored
The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953f ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
It used to grab an extra reference to struct file rather than just transferring to caller the one it had removed from descriptor table. New variant doesn't, and callers need to be adjusted. Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 6319194e ("Unify the primitives for file descriptor closing") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SGX fix from Thomas Gleixner: "A single fix for x86/SGX to prevent that memory which is allocated for an SGX enclave is accounted to the wrong memory control group" * tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Set active memcg prior to shmem allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm cleanup from Thomas Gleixner: "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code" * tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode updates from Thomas Gleixner: - Disable late microcode loading by default. Unless the HW people get their act together and provide a required minimum version in the microcode header for making a halfways informed decision its just lottery and broken. - Warn and taint the kernel when microcode is loaded late - Remove the old unused microcode loader interface - Remove a redundant perf callback from the microcode loader * tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove unnecessary perf callback x86/microcode: Taint and warn on late loading x86/microcode: Default-disable late loading x86/microcode: Rip out the OLD_INTERFACE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot update from Thomas Gleixner: "Use strlcpy() instead of strscpy() in arch_setup()" * tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/setup: Use strscpy() to replace deprecated strlcpy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clockevent/clocksource updates from Thomas Gleixner: - Device tree bindings for MT8186 - Tell the kernel that the RISC-V SBI timer stops in deeper power states - Make device tree parsing in sp804 more robust - Dead code removal and tiny fixes here and there - Add the missing SPDX identifiers * tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check clocksource/drivers/timer-sun5i: Convert to SPDX identifier clocksource/drivers/timer-sun4i: Convert to SPDX identifier clocksource/drivers/pistachio: Convert to SPDX identifier clocksource/drivers/orion: Convert to SPDX identifier clocksource/drivers/lpc32xx: Convert to SPDX identifier clocksource/drivers/digicolor: Convert to SPDX identifier clocksource/drivers/armada-370-xp: Convert to SPDX identifier clocksource/drivers/mips-gic-timer: Convert to SPDX identifier clocksource/drivers/jcore: Convert to SPDX identifier clocksource/drivers/bcm_kona: Convert to SPDX identifier clocksource/drivers/sp804: Avoid error on multiple instances clocksource/drivers/riscv: Events are stopped during CPU suspend clocksource/drivers/ixp4xx: Drop boardfile probe path dt-bindings: timer: Add compatible for Mediatek MT8186
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "Fix the fallout of sysctl code move which placed the init function wrong" * tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/autogroup: Fix sysctl move
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: - Make the ICL event constraints match reality - Remove a unused local variable * tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Remove unused local variable perf/x86/intel: Fix event constraints for ICL
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixlet from Thomas Gleixner: "Trivial indentation fix in Kconfig" * tag 'perf-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/Kconfig: Fix indentation in the Kconfig file
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fixes from Thomas Gleixner: - Handle __ubsan_handle_builtin_unreachable() correctly and treat it as noreturn - Allow architectures to select uaccess validation - Use the non-instrumented bit test for test_cpu_has() to prevent escape from non-instrumentable regions - Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape from non-instrumentable regions - Mark a few tiny inline as __always_inline to prevent GCC from bringing them out of line and instrumenting them - Mark the empty stub context_tracking_enabled() as always inline as GCC brings them out of line and instruments the empty shell - Annotate ex_handler_msr_mce() as dead end * tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/extable: Annotate ex_handler_msr_mce() as a dead end context_tracking: Always inline empty stubs x86: Always inline on_thread_stack() and current_top_of_stack() jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds x86/cpu: Elide KCSAN for cpu_has() and friends objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "Mostly small bug fixes plus other trivial updates. The major change of note is moving ufs out of scsi and a minor update to lpfc vmid handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters scsi: mpi3mr: Fix kernel-doc scsi: lpfc: Add support for ATTO Fibre Channel devices scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning scsi: sd_zbc: Prevent zone information memory leak scsi: sd: Fix potential NULL pointer dereference scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings scsi: myrb: Fix up null pointer access on myrb_cleanup() scsi: core: Unexport scsi_bus_type scsi: sd: Don't call blk_cleanup_disk() in sd_probe() scsi: ufs: ufshcd: Delete unnecessary NULL check scsi: isci: Fix typo in comment scsi: pmcraid: Fix typo in comment scsi: smartpqi: Fix typo in comment scsi: qedf: Fix typo in comment scsi: esas2r: Fix typo in comment scsi: storvsc: Fix typo in comment scsi: ufs: Split the drivers/scsi/ufs directory scsi: qla1280: Remove redundant variable ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linuxLinus Torvalds authored
Pull hardware timestamping subsystem from Thierry Reding: "This contains the new HTE (hardware timestamping engine) subsystem that has been in the works for a couple of months now. The infrastructure provided allows for drivers to register as hardware timestamp providers, while consumers will be able to request events that they are interested in (such as GPIOs and IRQs) to be timestamped by the hardware providers. Note that this currently supports only one provider, but there seems to be enough interest in this functionality and we expect to see more drivers added once this is merged" [ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake platforms as another future timestamp provider ] * tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: timestamp: Correct id path dt-bindings: Renamed hte directory to timestamp hte: Uninitialized variable in hte_ts_get() hte: Fix off by one in hte_push_ts_ns() hte: Fix possible use-after-free in tegra_hte_test_remove() hte: Remove unused including <linux/version.h> MAINTAINERS: Add HTE Subsystem hte: Add Tegra HTE test driver tools: gpio: Add new hardware clock type gpiolib: cdev: Add hardware timestamp clock type gpio: tegra186: Add HTE support gpiolib: Add HTE support dt-bindings: Add HTE bindings hte: Add Tegra194 HTE kernel provider drivers: Add hardware timestamp engine (HTE) subsystem Documentation: Add HTE subsystem guide
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - Fix build regressions for parisc, csky, nios2, openrisc - Simplify module builds for CONFIG_LTO_CLANG and CONFIG_X86_KERNEL_IBT - Remove arch/parisc/nm, which was presumably a workaround for old tools - Check the odd combination of EXPORT_SYMBOL and 'static' precisely - Make external module builds robust against "too long argument error" - Support j, k keys for moving the cursor in nconfig * tag 'kbuild-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: Allow to select bash in a modified environment scripts: kconfig: nconf: make nconfig accept jk keybindings modpost: use fnmatch() to simplify match() modpost: simplify mod->name allocation kbuild: factor out the common objtool arguments kbuild: move vmlinux.o link to scripts/Makefile.vmlinux_o kbuild: clean .tmp_* pattern by make clean kbuild: remove redundant cleanups in scripts/link-vmlinux.sh kbuild: rebuild multi-object modules when objtool is updated kbuild: add cmd_and_savecmd macro kbuild: make *.mod rule robust against too long argument error kbuild: make built-in.a rule robust against too long argument error kbuild: check static EXPORT_SYMBOL* by script instead of modpost parisc: remove arch/parisc/nm kbuild: do not create *.prelink.o for Clang LTO or IBT kbuild: replace $(linked-object) with CONFIG options kbuild: do not try to parse *.cmd files for objects provided by compiler kbuild: replace $(if A,A,B) with $(or A,B) in scripts/Makefile.modpost modpost: squash if...else-if in find_elf_symbol2() modpost: reuse ARRAY_SIZE() macro for section_mismatch() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs pathname updates from Al Viro: "Several cleanups in fs/namei.c" * tag 'pull-18-rc1-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: namei: cleanup double word in comment get rid of dead code in legitimize_root() fs/namei.c:reserve_stack(): tidy up the call of try_to_unlazy()
-