* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (37 commits)
  drm/i915: fix modeset devname allocation + agp init return check.
  drm/i915: Remove redundant test in error path.
  drm: Add a debug node for vblank state.
  drm: Avoid use-before-null-test on dev in drm_cleanup().
  drm/i915: Don't print to dmesg when taking signal during object_pin.
  drm: pin new and unpin old buffer when setting a mode.
  drm/i915: un-EXPORT and make 'intelfb_panic' static
  drm/i915: Delete unused, pointless i915_driver_firstopen.
  drm/i915: fix sparse warnings: returning void-valued expression
  drm/i915: fix sparse warnings: move 'extern' decls to header file
  drm/i915: fix sparse warnings: make symbols static
  drm/i915: fix sparse warnings: declare one-bit bitfield as unsigned
  drm/i915: Don't double-unpin buffers if we take a signal in evict_everything().
  drm/i915: Fix fbcon setup to align display pitch to 64b.
  drm/i915: Add missing userland definitions for gem init/execbuffer.
  i915/drm: provide compat defines for userspace for certain struct members.
  drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.
  drm: sanitise drm modesetting API + remove unused hotplug
  drm: fix allowing master ioctls on non-master fds.
  drm/radeon: use locked rmmap to remove sarea mapping.
  ...

* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/intel: Fix broken ® symbol in device name.
  agp/intel: add support for G41 chipset

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6: (98 commits)
  sparc: move select of ARCH_SUPPORTS_MSI
  sparc: drop SUN_IO
  sparc: unify sections.h
  sparc: use .data.init_task section for init_thread_union
  sparc: fix array overrun check in of_device_64.c
  sparc: unify module.c
  sparc64: prepare module_64.c for unification
  sparc64: use bit neutral Elf symbols
  sparc: unify module.h
  sparc: introduce CONFIG_BITS
  sparc: fix hardirq.h removal fallout
  sparc64: do not export pus_fs_struct
  sparc: use sparc64 version of scatterlist.h
  sparc: Commonize memcmp assembler.
  sparc: Unify strlen assembler.
  sparc: Add asm/asm.h
  sparc: Kill memcmp_32.S code which has been ifdef'd out for centuries.
  sparc: replace for_each_cpu_mask_nr with for_each_cpu
  sparc: fix sparse warnings in irq_32.c
  sparc: add include guards to kernel.h
  ...

* 'for-2.6.29' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  bio: get rid of bio_vec clearing
  bounce: don't rely on a zeroed bio_vec list
  cciss: simplify parameters to deregister_disk function
  cfq-iosched: fix race between exiting queue and exiting task
  loop: Do not call loop_unplug for not configured loop device.
  loop: Flush possible running bios when loop device is released.
  alpha: remove dead BIO_VMERGE_BOUNDARY
  Get rid of CONFIG_LSF
  block: make blk_softirq_init() static
  block: use min_not_zero in blk_queue_stack_limits
  block: add one-hit cache for disk partition lookup
  cfq-iosched: remove limit of dispatch depth of max 4 times quantum
  nbd: tell the block layer that it is not a rotational device
  block: get rid of elevator_t typedef
  aio: make the lookup_ioctx() lockless
  bio: add support for inlining a number of bio_vecs inside the bio
  bio: allow individual slabs in the bio_set
  bio: move the slab pointer inside the bio_set
  bio: only mempool back the largest bio_vec slab cache
  block: don't use plugging on SSD devices
  ...

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, sparseirq: clean up Kconfig entry
  x86: turn CONFIG_SPARSE_IRQ off by default
  sparseirq: fix numa_migrate_irq_desc dependency and comments
  sparseirq: add kernel-doc notation for new member in irq_desc, -v2
  locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
  sparseirq, xen: make sure irq_desc is allocated for interrupts
  sparseirq: fix !SMP building, #2
  x86, sparseirq: move irq_desc according to smp_affinity, v7
  proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
  sparse irqs: add irqnr.h to the user headers list
  sparse irqs: handle !GENIRQ platforms
  sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
  sparseirq: fix Alpha build failure
  sparseirq: fix typo in !CONFIG_IO_APIC case
  x86, MSI: pass irq_cfg and irq_desc
  x86: MSI start irq numbering from nr_irqs_gsi
  x86: use NR_IRQS_LEGACY
  sparse irq_desc[] array: core kernel and x86 changes
  genirq: record IRQ_LEVEL in irq_desc[]
  irq.h: remove padding from irq_desc on 64bits

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimers: fix warning in kernel/hrtimer.c
  x86: make sure we really have an hpet mapping before using it
  x86: enable HPET on Fujitsu u9200
  linux/timex.h: cleanup for userspace
  posix-timers: simplify de_thread()->exit_itimers() path
  posix-timers: check ->it_signal instead of ->it_pid to validate the timer
  posix-timers: use "struct pid*" instead of "struct task_struct*"
  nohz: suppress needless timer reprogramming
  clocksource, acpi_pm.c: put acpi_pm_read_slow() under CONFIG_PCI
  nohz: no softirq pending warnings for offline cpus
  hrtimer: removing all ur callback modes, fix
  hrtimer: removing all ur callback modes, fix hotplug
  hrtimer: removing all ur callback modes
  x86: correct link to HPET timer specification
  rtc-cmos: export second NVRAM bank

Fixed up conflicts in sound/drivers/pcsp/pcsp.c and sound/core/hrtimer.c
manually.

* 'core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits)
  stacktrace: provide save_stack_trace_tsk() weak alias
  rcu: provide RCU options on non-preempt architectures too
  printk: fix discarding message when recursion_bug
  futex: clean up futex_(un)lock_pi fault handling
  "Tree RCU": scalable classic RCU implementation
  futex: rename field in futex_q to clarify single waiter semantics
  x86/swiotlb: add default swiotlb_arch_range_needs_mapping
  x86/swiotlb: add default phys<->bus conversion
  x86: unify pci iommu setup and allow swiotlb to compile for 32 bit
  x86: add swiotlb allocation functions
  swiotlb: consolidate swiotlb info message printing
  swiotlb: support bouncing of HighMem pages
  swiotlb: factor out copy to/from device
  swiotlb: add arch hook to force mapping
  swiotlb: allow architectures to override phys<->bus<->phys conversions
  swiotlb: add comment where we handle the overflow of a dma mask on 32 bit
  rcu: fix rcutorture behavior during reboot
  resources: skip sanity check of busy resources
  swiotlb: move some definitions to header
  swiotlb: allow architectures to override swiotlb pool allocation
  ...

Fix up trivial conflicts in
  arch/x86/kernel/Makefile
  arch/x86/mm/init_32.c
  include/linux/hardirq.h
as per Ingo's suggestions.

devname needs to be allocated before the irq is installed, so the
irq routines get the correct name in /proc.

Also check the return value from the AGP init function, and
fixup the exit points.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The error path for object list being null is in the second goto target.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

This showed up in logs where people had a hung chip, so pinning was blocked
on the chip unpinning other buffers, and the X Server took its scheduler
signal during that time.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

This removes the requirement for user space to pin a buffer before
setting a mode that is backed by the pixels from that buffer.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Fix this sparse warning:

  drivers/gpu/drm/i915/intel_fb.c:417:5: warning: symbol 'intelfb_panic' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Thanks to Hannes Eder for pointing out that this code was dead according to
sparse.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Move 'extern'-decls from "intel_dvo.c" to "dvo.h", as "dvo.h" is
included by and only by files where the symbols are either defined or
used.
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>

We haven't seen this in practice, but it was visible when looking at a bug
report from when i915_gem_evict_everything() was broken and would always
return error.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>

This is required by the display plane, and fixes 1400x1050 laptop displays.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

fdo bug #19132.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Painfully userspace started using new names that were never actually to be
used from the external repo.

Also fill out the gaps in the structure for old/new userspace compat

Add compat defines for these structs.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The replace fb ioctl replaces the backing buffer object for a modesetting
framebuffer object.  This can be acheived by just creating a new
framebuffer backed by the new buffer object, setting that for the crtcs
in question and then removing the old framebuffer object.
Signed-off-by: Kristian Hogsberg <krh@redhat.com>
Acked-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

The initially merged modesetting API has some uglies in it, this
cleans up the struct members and ioctl ordering for initial submission.

It also removes the unneeded hotplug infrastructure.

airlied:- I've pulled this patch in from git modesetting-gem tree.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The multi-master patches changed master to a pointer, and this fell out,
change to use is_master.
Signed-off-by: Dave Airlie <airlied@redhat.com>

this exports the locked version of the symbol as struct_mutex locks it all.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Thanks to Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> for reporting
this.
Signed-off-by: Dave Airlie <airlied@redhat.com>

the calling function doesn't call this function unless one of the two
states that sets the value is true.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>

The page protections need to be checked whether they need to be more flexible.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This is what X picks now, so we should do the same.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add mode setting support to the DRM layer.

This is a fairly big chunk of work that allows DRM drivers to provide
full output control and configuration capabilities to userspace.  It was
motivated by several factors:
  - the fb layer's APIs aren't suited for anything but simple
    configurations
  - coordination between the fb layer, DRM layer, and various userspace
    drivers is poor to non-existent (radeonfb excepted)
  - user level mode setting drivers makes displaying panic & oops
    messages more difficult
  - suspend/resume of graphics state is possible in many more
    configurations with kernel level support

This commit just adds the core DRM part of the mode setting APIs.
Driver specific commits using these new structure and APIs will follow.

Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com>
Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Use the new core GEM object mapping code to allow GTT mapping of GEM
objects on i915.  The fault handler will make sure a fence register is
allocated too, if the object in question is tiled.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Add core support for mapping of GEM objects.  Drivers should provide a
vm_operations_struct if they want to support page faulting of objects.
The code for handling GEM object offsets was taken from TTM, which was
written by Thomas Hellström.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>