- 07 Jul, 2023 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-07-05 (ice) This series contains updates to ice driver only. Sridhar fixes incorrect comparison of max Tx rate limit to occur against each TC value rather than the aggregate. He also resolves an issue with the wrong VSI being used when setting max Tx rate when TCs are enabled. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix tx queue rate limit when TCs are configured ice: Fix max_rate check while configuring TX rate limits ==================== Link: https://lore.kernel.org/r/20230705201346.49370-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-07-05 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: RX, Fix page_pool page fragment tracking for XDP net/mlx5: Query hca_cap_2 only when supported net/mlx5e: TC, CT: Offload ct clear only once net/mlx5e: Check for NOT_READY flag state after locking net/mlx5: Register a unique thermal zone per device net/mlx5e: RX, Fix flush and close release flow of regular rq for legacy rq net/mlx5e: fix memory leak in mlx5e_ptp_open net/mlx5e: fix memory leak in mlx5e_fs_tt_redirect_any_create net/mlx5e: fix double free in mlx5e_destroy_flow_table ==================== Link: https://lore.kernel.org/r/20230705175757.284614-1-saeed@kernel.orgSigned-off-by:
-
M A Ramdhan authored
In the event of a failure in tcf_change_indev(), fw_set_parms() will immediately return an error after incrementing or decrementing reference counter in tcf_bind_filter(). If attacker can control reference counter to zero and make reference freed, leading to use after free. In order to prevent this, move the point of possible failure above the point where the TC_FW_CLASSID is handled. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
M A Ramdhan <ramdhan@starlabs.sg> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Reviewed-by:
Pedro Tammela <pctammela@mojatatu.com> Message-ID: <20230705161530.52003-1-ramdhan@starlabs.sg> Signed-off-by:
-
Quan Zhou authored
For some cases as below, we may encounter the unpreditable chip stats in driver probe() * The system reboot flow do not work properly, such as kernel oops while rebooting, and then the driver do not go back to default status at this moment. * Similar to the flow above. If the device was enabled in BIOS or UEFI, the system may switch to Linux without driver fully shutdown. To avoid the problem, force push the device back to default in probe() * mt7921e_mcu_fw_pmctrl() : return control privilege to chip side. * mt7921_wfsys_reset() : cleanup chip config before resource init. Error log [59007.600714] mt7921e 0000:02:00.0: ASIC revision: 79220010 [59010.889773] mt7921e 0000:02:00.0: Message 00000010 (seq 1) timeout [59010.889786] mt7921e 0000:02:00.0: Failed to get patch semaphore [59014.217839] mt7921e 0000:02:00.0: Message 00000010 (seq 2) timeout [59014.217852] mt7921e 0000:02:00.0: Failed to get patch semaphore [59017.545880] mt7921e 0000:02:00.0: Message 00000010 (seq 3) timeout [59017.545893] mt7921e 0000:02:00.0: Failed to get patch semaphore [59020.874086] mt7921e 0000:02:00.0: Message 00000010 (seq 4) timeout [59020.874099] mt7921e 0000:02:00.0: Failed to get patch semaphore [59024.202019] mt7921e 0000:02:00.0: Message 00000010 (seq 5) timeout [59024.202033] mt7921e 0000:02:00.0: Failed to get patch semaphore [59027.530082] mt7921e 0000:02:00.0: Message 00000010 (seq 6) timeout [59027.530096] mt7921e 0000:02:00.0: Failed to get patch semaphore [59030.857888] mt7921e 0000:02:00.0: Message 00000010 (seq 7) timeout [59030.857904] mt7921e 0000:02:00.0: Failed to get patch semaphore [59034.185946] mt7921e 0000:02:00.0: Message 00000010 (seq 8) timeout [59034.185961] mt7921e 0000:02:00.0: Failed to get patch semaphore [59037.514249] mt7921e 0000:02:00.0: Message 00000010 (seq 9) timeout [59037.514262] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.842362] mt7921e 0000:02:00.0: Message 00000010 (seq 10) timeout [59040.842375] mt7921e 0000:02:00.0: Failed to get patch semaphore [59040.923845] mt7921e 0000:02:00.0: hardware init failed Cc: stable@vger.kernel.org Fixes: 5c14a5f9 ("mt76: mt7921: introduce mt7921e support") Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Juan Martinez <juan.martinez@amd.com> Co-developed-by:
Leon Yen <leon.yen@mediatek.com> Signed-off-by:
Quan Zhou <quan.zhou@mediatek.com> Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Message-ID: <39fcb7cee08d4ab940d38d82f21897483212483f.1688569385.git.deren.wu@mediatek.com> Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Fix dropping of oversize preemptible frames with felix DSA driver It has been reported that preemptible traffic doesn't completely behave as expected. Namely, large packets should be able to be squeezed (through fragmentation) through taprio time slots smaller than the transmission time of the full frame. That does not happen due to logic in the driver (for oversize frame dropping with taprio) that was not updated in order for this use case to work. I am not sure whether it qualifies as "net" material, because some structural changes are involved, and it is a "never worked" scenario. OTOH, this is a complaint coming from users for a v6.4 kernel. It's up to maintainers to decide whether this series can be considered; I've submitted it as non-RFC in the optimistic case that it will be :) Demo script illustrating the issue below. add_taprio() { local ifname=$1 echo "Creating root taprio" tc qdisc replace dev $ifname handle 8001: parent root stab overhead 24 taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 \ sched-entry S 01 1216 \ sched-entry S fe 12368 \ fp P E E E E E E E \ flags 0x2 } remove_taprio() { local ifname=$1 echo "Removing taprio" tc qdisc del dev $ifname root } ip netns add ns0 ip link set eno0 netns ns0 && ip -n ns0 link set eno0 up && ip -n ns0 addr add 192.168.100.1/24 dev eno0 ip addr add 192.168.100.2/24 dev swp0 && ip link set swp0 up ip netns exec ns0 ethtool --set-mm eno0 pmac-enabled on verify-enabled off tx-enabled on ethtool --set-mm swp0 pmac-enabled on verify-enabled off tx-enabled on add_taprio swp0 ping 192.168.100.1 -s 1000 -c 5 # sent through TC0 ethtool -I --show-mm swp0 | grep MACMergeFragCountTx # should increase ip addr flush swp0 && ip link set swp0 down remove_taprio swp0 ethtool --set-mm swp0 pmac-enabled off verify-enabled off tx-enabled off ip netns exec ns0 ethtool --set-mm eno0 pmac-enabled off verify-enabled off tx-enabled off ip netns del ns0 ==================== Link: https://lore.kernel.org/r/20230705104422.49025-1-vladimir.oltean@nxp.comSigned-off-by: -
Vladimir Oltean authored
This switch implements Hold/Release in a strange way, with no control from the user as required by IEEE 802.1Q-2018 through Set-And-Hold-MAC and Set-And-Release-MAC, but rather, it emits HOLD requests implicitly based on the schedule. Namely, when the gate of a preemptible TC is about to close (actually QSYS::PREEMPTION_CFG.HOLD_ADVANCE octet times in advance of this event), the QSYS seems to emit a HOLD request pulse towards the MAC which preempts the currently transmitted packet, and further packets are held back in the queue system. This allows large frames to be squeezed through small time slots, because HOLD requests initiated by the gate events result in the frame being segmented in multiple fragments, the bit time of which is equal to the size of the time slot. It has been reported that the vsc9959_tas_guard_bands_update() logic breaks this, because it doesn't take preemptible TCs into account, and enables oversized frame dropping when the time slot doesn't allow a full MTU to be sent, but it does allow 2*minFragSize to be sent (128B). Packets larger than 128B are dropped instead of being sent in multiple fragments. Confusingly, the manual says: | For guard band, SDU calculation of a traffic class of a port, if | preemption is enabled (through 'QSYS::PREEMPTION_CFG.P_QUEUES') then | QSYS::PREEMPTION_CFG.HOLD_ADVANCE is used, otherwise | QSYS::QMAXSDU_CFG_*.QMAXSDU_* is used. but this only refers to the static guard band durations, and the QMAXSDU_CFG_* registers have dual purpose - the other being oversized frame dropping, which takes place irrespective of whether frames are preemptible or express. So, to fix the problem, we need to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and modify the guard band logic to consider a different (lower) oversize limit for preemptible traffic classes. Fixes: 403ffc2c ("net: mscc: ocelot: add support for preemptible traffic classes") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-4-vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
In a future change we will need to make ocelot_port_update_active_preemptible_tcs() call vsc9959_tas_guard_bands_update(), but that is currently not possible, since the ocelot switch lib does not have access to functions private to the DSA wrapper. Move the pointer to vsc9959_tas_guard_bands_update() from felix->info (which is private to the DSA driver) to ocelot->ops (which is also visible to the ocelot switch lib). Signed-off-by:
-
Vladimir Oltean authored
In a future commit we will have to call vsc9959_tas_guard_bands_update() from ocelot_port_update_active_preemptible_tcs(), and that will be impossible due to the AB/BA locking dependencies between ocelot->tas_lock and ocelot->fwd_domain_lock. Just like we did in commit 3ff468ef ("net: mscc: ocelot: remove struct ocelot_mm_state :: lock"), the only solution is to expand the scope of ocelot->fwd_domain_lock for it to also serialize changes made to the Time-Aware Shaper, because those will have to result in a recalculation of cut-through TCs, which is something that depends on the forwarding domain. Signed-off-by:
-
- 06 Jul, 2023 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix missing overflow use refcount checks in nf_tables. 2) Do not set IPS_ASSURED for IPS_NAT_CLASH entries in GRE tracker, from Florian Westphal. 3) Bail out if nf_ct_helper_hash is NULL before registering helper, from Florent Revest. 4) Use siphash() instead siphash_4u64() to fix performance regression, also from Florian. 5) Do not allow to add rules to removed chains via ID, from Thadeu Lima de Souza Cascardo. 6) Fix oob read access in byteorder expression, also from Thadeu. netfilter pull request 23-07-06 ==================== Link: https://lore.kernel.org/r/20230705230406.52201-1-pablo@netfilter.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Klaus Kudielka authored
If we boot with mvneta.txq_number=1, the txq_map is set incorrectly: MVNETA_CPU_TXQ_ACCESS(1) refers to TX queue 1, but only TX queue 0 is initialized. Fix this. Fixes: 50bf8cb6 ("net: mvneta: Configure XPS support") Signed-off-by:
Klaus Kudielka <klaus.kudielka@gmail.com> Reviewed-by:
Michal Kubiak <michal.kubiak@intel.com> Link: https://lore.kernel.org/r/20230705053712.3914-1-klaus.kudielka@gmail.comSigned-off-by:
-
- 05 Jul, 2023 30 commits
-
-
Thadeu Lima de Souza Cascardo authored
When evaluating byteorder expressions with size 2, a union with 32-bit and 16-bit members is used. Since the 16-bit members are aligned to 32-bit, the array accesses will be out-of-bounds. It may lead to a stack-out-of-bounds access like the one below: [ 23.095215] ================================================================== [ 23.095625] BUG: KASAN: stack-out-of-bounds in nft_byteorder_eval+0x13c/0x320 [ 23.096020] Read of size 2 at addr ffffc90000007948 by task ping/115 [ 23.096358] [ 23.096456] CPU: 0 PID: 115 Comm: ping Not tainted 6.4.0+ #413 [ 23.096770] Call Trace: [ 23.096910] <IRQ> [ 23.097030] dump_stack_lvl+0x60/0xc0 [ 23.097218] print_report+0xcf/0x630 [ 23.097388] ? nft_byteorder_eval+0x13c/0x320 [ 23.097577] ? kasan_addr_to_slab+0xd/0xc0 [ 23.097760] ? nft_byteorder_eval+0x13c/0x320 [ 23.097949] kasan_report+0xc9/0x110 [ 23.098106] ? nft_byteorder_eval+0x13c/0x320 [ 23.098298] __asan_load2+0x83/0xd0 [ 23.098453] nft_byteorder_eval+0x13c/0x320 [ 23.098659] nft_do_chain+0x1c8/0xc50 [ 23.098852] ? __pfx_nft_do_chain+0x10/0x10 [ 23.099078] ? __kasan_check_read+0x11/0x20 [ 23.099295] ? __pfx___lock_acquire+0x10/0x10 [ 23.099535] ? __pfx___lock_acquire+0x10/0x10 [ 23.099745] ? __kasan_check_read+0x11/0x20 [ 23.099929] nft_do_chain_ipv4+0xfe/0x140 [ 23.100105] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.100327] ? lock_release+0x204/0x400 [ 23.100515] ? nf_hook.constprop.0+0x340/0x550 [ 23.100779] nf_hook_slow+0x6c/0x100 [ 23.100977] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.101223] nf_hook.constprop.0+0x334/0x550 [ 23.101443] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.101677] ? __pfx_nf_hook.constprop.0+0x10/0x10 [ 23.101882] ? __pfx_ip_rcv_finish+0x10/0x10 [ 23.102071] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.102291] ? rcu_read_lock_held+0x4b/0x70 [ 23.102481] ip_local_deliver+0xbb/0x110 [ 23.102665] ? __pfx_ip_rcv+0x10/0x10 [ 23.102839] ip_rcv+0x199/0x2a0 [ 23.102980] ? __pfx_ip_rcv+0x10/0x10 [ 23.103140] __netif_receive_skb_one_core+0x13e/0x150 [ 23.103362] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 23.103647] ? mark_held_locks+0x48/0xa0 [ 23.103819] ? process_backlog+0x36c/0x380 [ 23.103999] __netif_receive_skb+0x23/0xc0 [ 23.104179] process_backlog+0x91/0x380 [ 23.104350] __napi_poll.constprop.0+0x66/0x360 [ 23.104589] ? net_rx_action+0x1cb/0x610 [ 23.104811] net_rx_action+0x33e/0x610 [ 23.105024] ? _raw_spin_unlock+0x23/0x50 [ 23.105257] ? __pfx_net_rx_action+0x10/0x10 [ 23.105485] ? mark_held_locks+0x48/0xa0 [ 23.105741] __do_softirq+0xfa/0x5ab [ 23.105956] ? __dev_queue_xmit+0x765/0x1c00 [ 23.106193] do_softirq.part.0+0x49/0xc0 [ 23.106423] </IRQ> [ 23.106547] <TASK> [ 23.106670] __local_bh_enable_ip+0xf5/0x120 [ 23.106903] __dev_queue_xmit+0x789/0x1c00 [ 23.107131] ? __pfx___dev_queue_xmit+0x10/0x10 [ 23.107381] ? find_held_lock+0x8e/0xb0 [ 23.107585] ? lock_release+0x204/0x400 [ 23.107798] ? neigh_resolve_output+0x185/0x350 [ 23.108049] ? mark_held_locks+0x48/0xa0 [ 23.108265] ? neigh_resolve_output+0x185/0x350 [ 23.108514] neigh_resolve_output+0x246/0x350 [ 23.108753] ? neigh_resolve_output+0x246/0x350 [ 23.109003] ip_finish_output2+0x3c3/0x10b0 [ 23.109250] ? __pfx_ip_finish_output2+0x10/0x10 [ 23.109510] ? __pfx_nf_hook+0x10/0x10 [ 23.109732] __ip_finish_output+0x217/0x390 [ 23.109978] ip_finish_output+0x2f/0x130 [ 23.110207] ip_output+0xc9/0x170 [ 23.110404] ip_push_pending_frames+0x1a0/0x240 [ 23.110652] raw_sendmsg+0x102e/0x19e0 [ 23.110871] ? __pfx_raw_sendmsg+0x10/0x10 [ 23.111093] ? lock_release+0x204/0x400 [ 23.111304] ? __mod_lruvec_page_state+0x148/0x330 [ 23.111567] ? find_held_lock+0x8e/0xb0 [ 23.111777] ? find_held_lock+0x8e/0xb0 [ 23.111993] ? __rcu_read_unlock+0x7c/0x2f0 [ 23.112225] ? aa_sk_perm+0x18a/0x550 [ 23.112431] ? filemap_map_pages+0x4f1/0x900 [ 23.112665] ? __pfx_aa_sk_perm+0x10/0x10 [ 23.112880] ? find_held_lock+0x8e/0xb0 [ 23.113098] inet_sendmsg+0xa0/0xb0 [ 23.113297] ? inet_sendmsg+0xa0/0xb0 [ 23.113500] ? __pfx_inet_sendmsg+0x10/0x10 [ 23.113727] sock_sendmsg+0xf4/0x100 [ 23.113924] ? move_addr_to_kernel.part.0+0x4f/0xa0 [ 23.114190] __sys_sendto+0x1d4/0x290 [ 23.114391] ? __pfx___sys_sendto+0x10/0x10 [ 23.114621] ? __pfx_mark_lock.part.0+0x10/0x10 [ 23.114869] ? lock_release+0x204/0x400 [ 23.115076] ? find_held_lock+0x8e/0xb0 [ 23.115287] ? rcu_is_watching+0x23/0x60 [ 23.115503] ? __rseq_handle_notify_resume+0x6e2/0x860 [ 23.115778] ? __kasan_check_write+0x14/0x30 [ 23.116008] ? blkcg_maybe_throttle_current+0x8d/0x770 [ 23.116285] ? mark_held_locks+0x28/0xa0 [ 23.116503] ? do_syscall_64+0x37/0x90 [ 23.116713] __x64_sys_sendto+0x7f/0xb0 [ 23.116924] do_syscall_64+0x59/0x90 [ 23.117123] ? irqentry_exit_to_user_mode+0x25/0x30 [ 23.117387] ? irqentry_exit+0x77/0xb0 [ 23.117593] ? exc_page_fault+0x92/0x140 [ 23.117806] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 23.118081] RIP: 0033:0x7f744aee2bba [ 23.118282] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 23.119237] RSP: 002b:00007ffd04a7c9f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 23.119644] RAX: ffffffffffffffda RBX: 00007ffd04a7e0a0 RCX: 00007f744aee2bba [ 23.120023] RDX: 0000000000000040 RSI: 000056488e9e6300 RDI: 0000000000000003 [ 23.120413] RBP: 000056488e9e6300 R08: 00007ffd04a80320 R09: 0000000000000010 [ 23.120809] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 23.121219] R13: 00007ffd04a7dc38 R14: 00007ffd04a7ca00 R15: 00007ffd04a7e0a0 [ 23.121617] </TASK> [ 23.121749] [ 23.121845] The buggy address belongs to the virtual mapping at [ 23.121845] [ffffc90000000000, ffffc90000009000) created by: [ 23.121845] irq_init_percpu_irqstack+0x1cf/0x270 [ 23.122707] [ 23.122803] The buggy address belongs to the physical page: [ 23.123104] page:0000000072ac19f0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x24a09 [ 23.123609] flags: 0xfffffc0001000(reserved|node=0|zone=1|lastcpupid=0x1fffff) [ 23.123998] page_type: 0xffffffff() [ 23.124194] raw: 000fffffc0001000 ffffea0000928248 ffffea0000928248 0000000000000000 [ 23.124610] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 23.125023] page dumped because: kasan: bad access detected [ 23.125326] [ 23.125421] Memory state around the buggy address: [ 23.125682] ffffc90000007800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 23.126072] ffffc90000007880: 00 00 00 00 00 f1 f1 f1 f1 f1 f1 00 00 f2 f2 00 [ 23.126455] >ffffc90000007900: 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 [ 23.126840] ^ [ 23.127138] ffffc90000007980: 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 [ 23.127522] ffffc90000007a00: f3 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 23.127906] ================================================================== [ 23.128324] Disabling lock debugging due to kernel taint Using simple s16 pointers for the 16-bit accesses fixes the problem. For the 32-bit accesses, src and dst can be used directly. Fixes: 96518518 ("netfilter: add nftables") Cc: stable@vger.kernel.org Reported-by: Tanguy DUBROCA (@SidewayRE) from @Synacktiv working with ZDI Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth, bpf and wireguard. Current release - regressions: - nvme-tcp: fix comma-related oops after sendpage changes Current release - new code bugs: - ptp: make max_phase_adjustment sysfs device attribute invisible when not supported Previous releases - regressions: - sctp: fix potential deadlock on &net->sctp.addr_wq_lock - mptcp: - ensure subflow is unhashed before cleaning the backlog - do not rely on implicit state check in mptcp_listen() Previous releases - always broken: - net: fix net_dev_start_xmit trace event vs skb_transport_offset() - Bluetooth: - fix use-bdaddr-property quirk - L2CAP: fix multiple UaFs - ISO: use hci_sync for setting CIG parameters - hci_event: fix Set CIG Parameters error status handling - hci_event: fix parsing of CIS Established Event - MGMT: fix marking SCAN_RSP as not connectable - wireguard: queuing: use saner cpu selection wrapping - sched: act_ipt: various bug fixes for iptables <> TC interactions - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging - eth: sfc: fix null-deref in devlink port without MAE access - eth: ibmvnic: do not reset dql stats on NON_FATAL err Misc: - xsk: honor SO_BINDTODEVICE on bind" * tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits) nfp: clean mc addresses in application firmware when closing port selftests: mptcp: pm_nl_ctl: fix 32-bit support selftests: mptcp: depend on SYN_COOKIES selftests: mptcp: userspace_pm: report errors with 'remove' tests selftests: mptcp: userspace_pm: use correct server port selftests: mptcp: sockopt: return error if wrong mark selftests: mptcp: sockopt: use 'iptables-legacy' if available selftests: mptcp: connect: fail if nft supposed to work mptcp: do not rely on implicit state check in mptcp_listen() mptcp: ensure subflow is unhashed before cleaning the backlog s390/qeth: Fix vipa deletion octeontx-af: fix hardware timestamp configuration net: dsa: sja1105: always enable the send_meta options net: dsa: tag_sja1105: fix MAC DA patching from meta frames net: Replace strlcpy with strscpy pptp: Fix fib lookup calls. mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX xsk: Honor SO_BINDTODEVICE on bind ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "In this cycle, we've mainly investigated the zoned block device support along with patches such as correcting write pointers between f2fs and storage, adding asynchronous zone reset flow, and managing the number of open zones. Other than them, f2fs adds another mount option, "errors=x" to specify how to handle when it detects an unexpected behavior at runtime. Enhancements: - support 'errors=remount-ro|continue|panic' mount option - enforce some inode flag policies - allow .tmp compression given extensions - add some ioctls to manage the f2fs compression - improve looped node chain flow - avoid issuing small-sized discard commands during checkpoint - implement an asynchronous zone reset Bug fixes: - fix deadlock in xattr and inode page lock - fix and add sanity check in some error paths - fix to avoid NULL pointer dereference f2fs_write_end_io() along with put_super - set proper flags to quota files - fix potential deadlock due to unpaired node_write lock use - fix over-estimating free section during FG GC - fix the wrong condition to determine atomic context As usual, also there are a number of patches with code refactoring and minor clean-ups" * tag 'f2fs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits) f2fs: fix to do sanity check on direct node in truncate_dnode() f2fs: only set release for file that has compressed data f2fs: fix compile warning in f2fs_destroy_node_manager() f2fs: fix error path handling in truncate_dnode() f2fs: fix deadlock in i_xattr_sem and inode page lock f2fs: remove unneeded page uptodate check/set f2fs: update mtime and ctime in move file range method f2fs: compress tmp files given extension f2fs: refactor struct f2fs_attr macro f2fs: convert to use sbi directly f2fs: remove redundant assignment to variable err f2fs: do not issue small discard commands during checkpoint f2fs: check zone write pointer points to the end of zone f2fs: add f2fs_ioc_get_compress_blocks f2fs: cleanup MIN_INLINE_XATTR_SIZE f2fs: add helper to check compression level f2fs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method f2fs: do more sanity check on inode f2fs: compress: fix to check validity of i_compress_flag field f2fs: add sanity compress level check for compressed file ... -
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull more xfs updates from Darrick Wong: - Fix some ordering problems with log items during log recovery - Don't deadlock the system by trying to flush busy freed extents while holding on to busy freed extents - Improve validation of log geometry parameters when reading the primary superblock - Validate the length field in the AGF header - Fix recordset filtering bugs when re-calling GETFSMAP to return more results when the resultset didn't previously fit in the caller's buffer - Fix integer overflows in GETFSMAP when working with rt volumes larger than 2^32 fsblocks - Fix GETFSMAP reporting the undefined space beyond the last rtextent - Fix filtering bugs in GETFSMAP's log device backend if the log ever becomes longer than 2^32 fsblocks - Improve validation of file offsets in the GETFSMAP range parameters - Fix an off by one bug in the pmem media failure notification computation - Validate the length field in the AGI header too * tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Remove unneeded semicolon xfs: AGI length should be bounds checked xfs: fix the calculation for "end" and "length" xfs: fix xfs_btree_query_range callers to initialize btree rec fully xfs: validate fsmap offsets specified in the query keys xfs: fix logdev fsmap query result filtering xfs: clean up the rtbitmap fsmap backend xfs: fix getfsmap reporting past the last rt extent xfs: fix integer overflows in the fsmap rtbitmap and logdev backends xfs: fix interval filtering in multi-step fsmap queries xfs: fix bounds check in xfs_defer_agfl_block() xfs: AGF length has never been bounds checked xfs: journal geometry is not properly bounds checked xfs: don't block in busy flushing when freeing extents xfs: allow extent free intents to be retried xfs: pass alloc flags through to xfs_extent_busy_flush() xfs: use deferred frees for btree block freeing xfs: don't reverse order of items in bulk AIL insertion xfs: remove redundant initializations of pointers drop_leaf and save_leaf
-
Linus Torvalds authored
Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "There's a little bit of everything in here: we've got various improvements and cleanups to drivers, some fixes across the board and a bit of new hardware support" * tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits) dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML pwm: Add Renesas RZ/G2L MTU3a PWM driver pwm: mtk_disp: Fix the disable flow of disp_pwm dt-bindings: pwm: restrict node name suffixes pwm: pca9685: Switch i2c driver back to use .probe() pwm: ab8500: Fix error code in probe() MAINTAINERS: add pwm to PolarFire SoC entry pwm: add microchip soft ip corePWM driver pwm: sysfs: Do not apply state to already disabled PWMs pwm: imx-tpm: force 'real_period' to be zero in suspend pwm: meson: make full use of common clock framework pwm: meson: don't use hdmi/video clock as mux parent pwm: meson: switch to using struct clk_parent_data for mux parents pwm: meson: remove not needed check in meson_pwm_calc pwm: meson: fix handling of period/duty if greater than UINT_MAX pwm: meson: modify and simplify calculation in meson_pwm_get_state dt-bindings: pwm: Add R-Car V3U device tree bindings dt-bindings: pwm: imx: add i.MX8QXP compatible pwm: mediatek: Add support for MT7981 dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull more devicetree updates from Rob Herring: - Whitespace clean-ups in binding examples - Restrict node name suffixes to "-[0-9]+" for cases of multiple instances which don't have unit-addresses - Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT schema * tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: soc: qcom: stats: Update maintainer email dt-bindings: cleanup DTS example whitespaces dt-bindings: timestamp: restrict node name suffixes dt-bindings: slimbus: restrict node name suffixes dt-bindings: watchdog: restrict node name suffixes dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml
-
Yinjun Zhang authored
When moving devices from one namespace to another, mc addresses are cleaned in software while not removed from application firmware. Thus the mc addresses are remained and will cause resource leak. Now use `__dev_mc_unsync` to clean mc addresses when closing port. Fixes: e20aa071 ("nfp: fix schedule in atomic context when sync mc address") Cc: stable@vger.kernel.org Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Acked-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Message-ID: <20230705052818.7122-1-louis.peens@corigine.com> Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2023-07-05 We've added 2 non-merge commits during the last 1 day(s) which contain a total of 3 files changed, 16 insertions(+), 4 deletions(-). The main changes are: 1) Fix BTF to warn but not returning an error for a NULL BTF to still be able to load modules under CONFIG_DEBUG_INFO_BTF, from SeongJae Park. 2) Fix xsk sockets to honor SO_BINDTODEVICE in bind(), from Ilya Maximets. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xsk: Honor SO_BINDTODEVICE on bind bpf, btf: Warn but return no error for NULL btf from __register_btf_kfunc_id_set() ==================== Link: https://lore.kernel.org/r/20230705171716.6494-1-daniel@iogearbox.netSigned-off-by:
-
Dragos Tatulea authored
Currently mlx5e releases pages directly to the page_pool for XDP_TX and does page fragment counting for XDP_REDIRECT. RX pages from the page_pool are leaking on XDP_REDIRECT because the xdp core will release only one fragment out of MLX5E_PAGECNT_BIAS_MAX and subsequently the page is marked as "skip release" which avoids the driver release. A fix would be to take an extra fragment for XDP_REDIRECT and not set the "skip release" bit so that the release on the driver side can handle the remaining bias fragments. But this would be a shortsighted solution. Instead, this patch converges the two XDP paths (XDP_TX and XDP_REDIRECT) to always do fragment tracking. The "skip release" bit is no longer necessary for XDP. Fixes: 6f574284 ("net/mlx5e: RX, Enable skb page recycling through the page_pool") Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Maher Sanalla authored
On vport enable, where fw's hca caps are queried, the driver queries hca_caps_2 without checking if fw truly supports them, causing a false failure of vfs vport load and blocking SRIOV enablement on old devices such as CX4 where hca_caps_2 support is missing. Thus, add a check for the said caps support before accessing them. Fixes: e5b9642a ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable") Signed-off-by:
Maher Sanalla <msanalla@nvidia.com> Reviewed-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
-
Yevgeny Kliteynik authored
Non-clear CT action causes a flow rule split, while CT clear action doesn't and is just a header-rewrite to the current flow rule. But ct offload is done in post_parse and is per ct action instance, so ct clear offload is parsed multiple times, while its deleted once. Fix this by post_parsing the ct action only once per flow attribute (which is per flow rule) by using a offloaded ct_attr flag. Fixes: 08fe94ec ("net/mlx5e: TC, Remove special handling of CT action") Signed-off-by:
Paul Blakey <paulb@nvidia.com> Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
-
Vlad Buslov authored
Currently the check for NOT_READY flag is performed before obtaining the necessary lock. This opens a possibility for race condition when the flow is concurrently removed from unready_flows list by the workqueue task, which causes a double-removal from the list and a crash[0]. Fix the issue by moving the flag check inside the section protected by uplink_priv->unready_flows_lock mutex. [0]: [44376.389654] general protection fault, probably for non-canonical address 0xdead000000000108: 0000 [#1] SMP [44376.391665] CPU: 7 PID: 59123 Comm: tc Not tainted 6.4.0-rc4+ #1 [44376.392984] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [44376.395342] RIP: 0010:mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core] [44376.396857] Code: 00 48 8b b8 68 ce 02 00 e8 8a 4d 02 00 4c 8d a8 a8 01 00 00 4c 89 ef e8 8b 79 88 e1 48 8b 83 98 06 00 00 48 8b 93 90 06 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 90 06 [44376.399167] RSP: 0018:ffff88812cc97570 EFLAGS: 00010246 [44376.399680] RAX: dead000000000122 RBX: ffff8881088e3800 RCX: ffff8881881bac00 [44376.400337] RDX: dead000000000100 RSI: ffff88812cc97500 RDI: ffff8881242f71b0 [44376.401001] RBP: ffff88811cbb0940 R08: 0000000000000400 R09: 0000000000000001 [44376.401663] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88812c944000 [44376.402342] R13: ffff8881242f71a8 R14: ffff8881222b4000 R15: 0000000000000000 [44376.402999] FS: 00007f0451104800(0000) GS:ffff88852cb80000(0000) knlGS:0000000000000000 [44376.403787] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [44376.404343] CR2: 0000000000489108 CR3: 0000000123a79003 CR4: 0000000000370ea0 [44376.405004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [44376.405665] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [44376.406339] Call Trace: [44376.406651] <TASK> [44376.406939] ? die_addr+0x33/0x90 [44376.407311] ? exc_general_protection+0x192/0x390 [44376.407795] ? asm_exc_general_protection+0x22/0x30 [44376.408292] ? mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core] [44376.408876] __mlx5e_tc_del_fdb_peer_flow+0xbc/0xe0 [mlx5_core] [44376.409482] mlx5e_tc_del_flow+0x42/0x210 [mlx5_core] [44376.410055] mlx5e_flow_put+0x25/0x50 [mlx5_core] [44376.410529] mlx5e_delete_flower+0x24b/0x350 [mlx5_core] [44376.411043] tc_setup_cb_reoffload+0x22/0x80 [44376.411462] fl_reoffload+0x261/0x2f0 [cls_flower] [44376.411907] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core] [44376.412481] ? mlx5e_rep_indr_setup_ft_cb+0x160/0x160 [mlx5_core] [44376.413044] tcf_block_playback_offloads+0x76/0x170 [44376.413497] tcf_block_unbind+0x7b/0xd0 [44376.413881] tcf_block_setup+0x17d/0x1c0 [44376.414269] tcf_block_offload_cmd.isra.0+0xf1/0x130 [44376.414725] tcf_block_offload_unbind+0x43/0x70 [44376.415153] __tcf_block_put+0x82/0x150 [44376.415532] ingress_destroy+0x22/0x30 [sch_ingress] [44376.415986] qdisc_destroy+0x3b/0xd0 [44376.416343] qdisc_graft+0x4d0/0x620 [44376.416706] tc_get_qdisc+0x1c9/0x3b0 [44376.417074] rtnetlink_rcv_msg+0x29c/0x390 [44376.419978] ? rep_movs_alternative+0x3a/0xa0 [44376.420399] ? rtnl_calcit.isra.0+0x120/0x120 [44376.420813] netlink_rcv_skb+0x54/0x100 [44376.421192] netlink_unicast+0x1f6/0x2c0 [44376.421573] netlink_sendmsg+0x232/0x4a0 [44376.421980] sock_sendmsg+0x38/0x60 [44376.422328] ____sys_sendmsg+0x1d0/0x1e0 [44376.422709] ? copy_msghdr_from_user+0x6d/0xa0 [44376.423127] ___sys_sendmsg+0x80/0xc0 [44376.423495] ? ___sys_recvmsg+0x8b/0xc0 [44376.423869] __sys_sendmsg+0x51/0x90 [44376.424226] do_syscall_64+0x3d/0x90 [44376.424587] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [44376.425046] RIP: 0033:0x7f045134f887 [44376.425403] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [44376.426914] RSP: 002b:00007ffd63a82b98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [44376.427592] RAX: ffffffffffffffda RBX: 000000006481955f RCX: 00007f045134f887 [44376.428195] RDX: 0000000000000000 RSI: 00007ffd63a82c00 RDI: 0000000000000003 [44376.428796] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [44376.429404] R10: 00007f0451208708 R11: 0000000000000246 R12: 0000000000000001 [44376.430039] R13: 0000000000409980 R14: 000000000047e538 R15: 0000000000485400 [44376.430644] </TASK> [44376.430907] Modules linked in: mlx5_ib mlx5_core act_mirred act_tunnel_key cls_flower vxlan dummy sch_ingress openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_g ss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: mlx5_core] [44376.433936] ---[ end trace 0000000000000000 ]--- [44376.434373] RIP: 0010:mlx5e_tc_del_fdb_flow+0xb3/0x340 [mlx5_core] [44376.434951] Code: 00 48 8b b8 68 ce 02 00 e8 8a 4d 02 00 4c 8d a8 a8 01 00 00 4c 89 ef e8 8b 79 88 e1 48 8b 83 98 06 00 00 48 8b 93 90 06 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 83 90 06 [44376.436452] RSP: 0018:ffff88812cc97570 EFLAGS: 00010246 [44376.436924] RAX: dead000000000122 RBX: ffff8881088e3800 RCX: ffff8881881bac00 [44376.437530] RDX: dead000000000100 RSI: ffff88812cc97500 RDI: ffff8881242f71b0 [44376.438179] RBP: ffff88811cbb0940 R08: 0000000000000400 R09: 0000000000000001 [44376.438786] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88812c944000 [44376.439393] R13: ffff8881242f71a8 R14: ffff8881222b4000 R15: 0000000000000000 [44376.439998] FS: 00007f0451104800(0000) GS:ffff88852cb80000(0000) knlGS:0000000000000000 [44376.440714] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [44376.441225] CR2: 0000000000489108 CR3: 0000000123a79003 CR4: 0000000000370ea0 [44376.441843] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [44376.442471] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: ad86755b ("net/mlx5e: Protect unready flows with dedicated lock") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Saeed Mahameed authored
Prior to this patch only one "mlx5" thermal zone could have been registered regardless of the number of individual mlx5 devices in the system. To fix this setup a unique name per device to register its own thermal zone. In order to not register a thermal zone for a virtual device (VF/SF) add a check for PF device type. The new name is a concatenation between "mlx5_" and "<PCI_DEV_BDF>", which will also help associating a thermal zone with its PCI device. $ lspci | grep ConnectX 00:04.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx] 00:05.0 Ethernet controller: Mellanox Technologies MT2892 Family [ConnectX-6 Dx] $ cat /sys/devices/virtual/thermal/thermal_zone0/type mlx5_0000:00:04.0 $ cat /sys/devices/virtual/thermal/thermal_zone1/type mlx5_0000:00:05.0 Fixes: c1fef618 ("net/mlx5: Implement thermal zone") CC: Sandipan Patra <spatra@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
Regular (non-XSK) RQs get flushed on XSK setup and re-activated on XSK close. If the same regular RQ is closed (a config change for example) soon after the XSK close, a double release occurs because the missing wqes get released a second time. Fixes: 3f93f829 ("net/mlx5e: RX, Defer page release in legacy rq for better recycling") Signed-off-by:
-
Zhengchao Shao authored
When kvzalloc_node or kvzalloc failed in mlx5e_ptp_open, the memory pointed by "c" or "cparams" is not freed, which can lead to a memory leak. Fix by freeing the array in the error path. Fixes: 145e5637 ("net/mlx5e: Add TX PTP port object support") Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
-
Zhengchao Shao authored
The memory pointed to by the fs->any pointer is not freed in the error path of mlx5e_fs_tt_redirect_any_create, which can lead to a memory leak. Fix by freeing the memory in the error path, thereby making the error path identical to mlx5e_fs_tt_redirect_any_destroy(). Fixes: 0f575c20 ("net/mlx5e: Introduce Flow Steering ANY API") Signed-off-by:
-
Zhengchao Shao authored
In function accel_fs_tcp_create_groups(), when the ft->g memory is successfully allocated but the 'in' memory fails to be allocated, the memory pointed to by ft->g is released once. And in function accel_fs_tcp_create_table, mlx5e_destroy_flow_table is called to release the memory pointed to by ft->g again. This will cause double free problem. Fixes: c062d52a ("net/mlx5e: Receive flow steering framework for accelerated TCP flows") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwireLinus Torvalds authored
Pull soundwire updates from Vinod Koul: - Stream handling and slave alert handling - Qualcomm Soundwire v2.0.0 controller support - Intel ACE2.x initial support and code reorganization * tag 'soundwire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (55 commits) soundwire: stream: Make master_list ordered to prevent deadlocks soundwire: bus: Prevent lockdep asserts when stream has multiple buses soundwire: qcom: fix storing port config out-of-bounds soundwire: intel_ace2x: fix SND_SOC_SOF_HDA_MLINK dependency soundwire: debugfs: Add missing SCP registers soundwire: stream: Remove unnecessary gotos soundwire: stream: Invert logic on runtime alloc flags soundwire: stream: Remove unneeded checks for NULL bus soundwire: bandwidth allocation: Remove pointless variable soundwire: cadence: revisit parity injection soundwire: intel/cadence: update hardware reset sequence soundwire: intel_bus_common: enable interrupts last soundwire: intel_bus_common: update error log soundwire: amd: Improve error message in remove callback soundwire: debugfs: fix unbalanced pm_runtime_put() soundwire: qcom: fix unbalanced pm_runtime_put() soundwire: qcom: set clk stop need reset flag at runtime soundwire: qcom: add software workaround for bus clash interrupt assertion soundwire: qcom: wait for fifo to be empty before suspend soundwire: qcom: drop unused struct qcom_swrm_ctrl members ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - Lots of improvement at atomisp driver, which is starting to look in good shape - Mediatek vcodec driver has gained support for av1 and hevc stateless codecs - New sensor driver: ov01a10 - verisilicon driver has gained AV1 entropy helpers - tegra-video has gained support for Tegra20 parallel input - dvb core has gained an extra property to better support DVB-S2X - as usual, lots of cleanups, fixes and improvements on media drivers * tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits) media: wl128x: fix a clang warning media: dvb: mb86a20s: get rid of a clang-15 warning media: cec: i2c: ch7322: also select REGMAP media: add HAS_IOPORT dependencies media: tc358746: select CONFIG_GENERIC_PHY media: mediatek: vcodec: Add dbgfs help function media: mediatek: vcodec: Add encode to support dbgfs media: mediatek: vcodec: Change dbgfs interface to support encode media: mediatek: vcodec: Get each instance format type media: mediatek: vcodec: Get each context resolution information media: mediatek: vcodec: Add a debugfs file to get different useful information media: mediatek: vcodec: Add debug params to control different log level media: mediatek: vcodec: Add debugfs interface to get debug information media: mediatek: vcodec: support stateless AV1 decoder media: verisilicon: Conditionally ignore native formats media: verisilicon: Enable AV1 decoder on rk3588 media: verisilicon: Add film grain feature to AV1 driver media: verisilicon: Add Rockchip AV1 decoder media: verisilicon: Add AV1 entropy helpers media: verisilicon: Compute motion vectors size for AV1 frames ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-traceLinus Torvalds authored
Pull tracing tooling updates from Steven Rostedt: - Add cgroup support for rtla via the -C option - Add --house-keeping option that tells rtla where to place the housekeeping threads - Have rtla/timerlat have its own tracing instance instead of using the top level tracing instance that is the default for other tracing users to use - Add auto analysis to timerlat_hist - Have rtla start the tracers after creating the instances - Reduce rtla hwnoise down to 75% from 100% as it runs with preemption disabled and can cause system instability at 100% - Add support to run timerlat_top and timerlat_hist threads in user-space instead of just using the kernel tasks - Some minor clean ups and documentation changes * tag 'trace-tools-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: Documentation: Add tools/rtla timerlat -u option documentation rtla/timerlat_hist: Add timerlat user-space support rtla/timerlat_top: Add timerlat user-space support rtla/hwnoise: Reduce runtime to 75% rtla: Start the tracers after creating all instances rtla/timerlat_hist: Add auto-analysis support rtla/timerlat: Give timerlat auto analysis its own instance rtla: Automatically move rtla to a house-keeping cpu rtla: Change monitored_cpus from char * to cpu_set_t rtla: Add --house-keeping option rtla: Add -C cgroup support
-
Linus Torvalds authored
Merge tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc architecture updates from Helge Deller: - Fix all compiler warnings in arch/parisc and drivers/parisc when compiled with W=1 * tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: syscalls: Avoid compiler warnings with W=1 parisc: math-emu: Avoid compiler warnings with W=1 parisc: Raise minimal GCC version to 12.0.0 parisc: unwind: Avoid missing prototype warning for handle_interruption() parisc: smp: Add declaration for start_cpu_itimer() parisc: pdt: Get prototype for arch_report_meminfo()
-
Linus Torvalds authored
I added a warning about about GUP no longer expanding the stack in commit a425ac53 ("gup: add warning if some caller would seem to want stack expansion"), but didn't really expect anybody to hit it. And it's true that nobody seems to have hit a _real_ case yet, but we certainly have a number of reports of false positives. Which not only causes extra noise in itself, but might also end up hiding any real cases if they do exist. So let's tighten up the warning condition, and replace the simplistic vma = find_vma(mm, start); if (vma && (start < vma->vm_start)) { WARN_ON_ONCE(vma->vm_flags & VM_GROWSDOWN); with a vma = gup_vma_lookup(mm, start); helper function which works otherwise like just "vma_lookup()", but with some heuristics for when to warn about gup no longer causing stack expansion. In particular, don't just warn for "below the stack", but warn if it's _just_ below the stack (with "just below" arbitrarily defined as 64kB, because why not?). And rate-limit it to at most once per hour, which means that any false positives shouldn't completely hide subsequent reports, but we won't be flooding the logs about it either. The previous code triggered when some GUP user (chromium crashpad) accessing past the end of the previous vma, for example. That has never expanded the stack, it just causes GUP to return early, and as such we shouldn't be warning about it. This is still going trigger the randomized testers, but to mitigate the noise from that, use "dump_stack()" instead of "WARN_ON_ONCE()" to get the kernel call chain. We'll get the relevant information, but syzbot shouldn't get too upset about it. Also, don't even bother with the GROWSUP case, which would be using different heuristics entirely, but only happens on parisc. Reported-by:
kernel test robot <oliver.sang@intel.com> Reported-by:
John Hubbard <jhubbard@nvidia.com> Reported-by: syzbot+6cf44e127903fdf9d929@syzkaller.appspotmail.com Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sridhar Samudrala authored
Configuring tx_maxrate via sysfs interface /sys/class/net/eth0/queues/tx-1/tx_maxrate was not working when TCs are configured because always main VSI was being used. Fix by using correct VSI in ice_set_tx_maxrate when TCs are configured. Fixes: 1ddef455 ("ice: Add NDO callback to set the maximum per-queue bitrate") Signed-off-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by:
Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by:
Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Sridhar Samudrala authored
Remove incorrect check in ice_validate_mqprio_opt() that limits filter configuration when sum of max_rates of all TCs exceeds the link speed. The max rate of each TC is unrelated to value used by other TCs and is valid as long as it is less than link speed. Fixes: fbc7b27a ("ice: enable ndo_setup_tc support for mqprio_qdisc") Signed-off-by:
-
Maulik Shah authored
Replace my email. Cc: devicetree@vger.kernel.org Signed-off-by:
Maulik Shah <quic_mkshah@quicinc.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230703092026.4923-1-quic_mkshah@quicinc.comSigned-off-by:
Rob Herring <robh@kernel.org>
-
Krzysztof Kozlowski authored
The DTS code coding style expects spaces around '=' sign. Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Acked-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by:
Conor Dooley <conor.dooley@microchip.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm Acked-by:
Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
Mike Leach <mike.leach@linaro.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Thadeu Lima de Souza Cascardo authored
When adding a rule to a chain referring to its ID, if that chain had been deleted on the same batch, the rule might end up referring to a deleted chain. This will lead to a WARNING like following: [ 33.098431] ------------[ cut here ]------------ [ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260 [ 33.099217] Modules linked in: [ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409 [ 33.099726] Workqueue: events nf_tables_trans_destroy_work [ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260 [ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 [ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202 [ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000 [ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000 [ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500 [ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10 [ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000 [ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0 [ 33.104872] PKRU: 55555554 [ 33.104999] Call Trace: [ 33.105113] <TASK> [ 33.105214] ? show_regs+0x72/0x90 [ 33.105371] ? __warn+0xa5/0x210 [ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.105732] ? report_bug+0x1f2/0x200 [ 33.105902] ? handle_bug+0x46/0x90 [ 33.106546] ? exc_invalid_op+0x19/0x50 [ 33.106762] ? asm_exc_invalid_op+0x1b/0x20 [ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.107249] ? nf_tables_chain_destroy+0x30/0x260 [ 33.107506] nf_tables_trans_destroy_work+0x669/0x680 [ 33.107782] ? mark_held_locks+0x28/0xa0 [ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70 [ 33.108538] process_one_work+0x68c/0xb70 [ 33.108755] ? lock_acquire+0x17f/0x420 [ 33.108977] ? __pfx_process_one_work+0x10/0x10 [ 33.109218] ? do_raw_spin_lock+0x128/0x1d0 [ 33.109435] ? _raw_spin_lock_irq+0x71/0x80 [ 33.109634] worker_thread+0x2bd/0x700 [ 33.109817] ? __pfx_worker_thread+0x10/0x10 [ 33.110254] kthread+0x18b/0x1d0 [ 33.110410] ? __pfx_kthread+0x10/0x10 [ 33.110581] ret_from_fork+0x29/0x50 [ 33.110757] </TASK> [ 33.110866] irq event stamp: 1651 [ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0 [ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0 [ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112453] ---[ end trace 0000000000000000 ]--- This is due to the nft_chain_lookup_byid ignoring the genmask. After this change, adding the new rule will fail as it will not find the chain. Fixes: 837830a4 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute") Cc: stable@vger.kernel.org Reported-by: Mingi Cho of Theori working with ZDI Signed-off-by:
-
Florian Westphal authored
Originally this used jhash2() over tuple and folded the zone id, the pernet hash value, destination port and l4 protocol number into the 32bit seed value. When the switch to siphash was done, I used an on-stack temporary buffer to build a suitable key to be hashed via siphash(). But this showed up as performance regression, so I got rid of the temporary copy and collected to-be-hashed data in 4 u64 variables. This makes it easy to build tuples that produce the same hash, which isn't desirable even though chain lengths are limited. Switch back to plain siphash, but just like with jhash2(), take advantage of the fact that most of to-be-hashed data is already in a suitable order. Use an empty struct as annotation in 'struct nf_conntrack_tuple' to mark last member that can be used as hash input. The only remaining data that isn't present in the tuple structure are the zone identifier and the pernet hash: fold those into the key. Fixes: d2c806ab ("netfilter: conntrack: use siphash_4u64") Signed-off-by:
-
Florent Revest authored
If nf_conntrack_init_start() fails (for example due to a register_nf_conntrack_bpf() failure), the nf_conntrack_helper_fini() clean-up path frees the nf_ct_helper_hash map. When built with NF_CONNTRACK=y, further netfilter modules (e.g: netfilter_conntrack_ftp) can still be loaded and call nf_conntrack_helpers_register(), independently of whether nf_conntrack initialized correctly. This accesses the nf_ct_helper_hash dangling pointer and causes a uaf, possibly leading to random memory corruption. This patch guards nf_conntrack_helper_register() from accessing a freed or uninitialized nf_ct_helper_hash pointer and fixes possible uses-after-free when loading a conntrack module. Cc: stable@vger.kernel.org Fixes: 12f7a505 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by:
Florent Revest <revest@chromium.org> Reviewed-by:
-
Florian Westphal authored
Now that conntrack core is allowd to insert clashing entries, make sure GRE won't set assured flag on NAT_CLASH entries, just like UDP. Doing so prevents early_drop logic for these entries. Fixes: d671fd82 ("netfilter: conntrack: allow insertion clash of gre protocol") Signed-off-by:
-
