Add documentation to support RX-TX & CTS-RTS GPIO pin swap in HW.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Add documentation for the interconnect and interconnect-names properties
for the GENI QUP.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert QUP geni-se bindings to DT schema format using json-schema.
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[robh: Fix up example warnings]
Signed-off-by: Rob Herring <robh@kernel.org>

Silex Insight is a microelectronic company whose headquarter is located
in Belgium.
Web site of the company: https://www.silexinsight.com/Signed-off-by: Olivier Sobrie <olivier.sobrie@silexinsight.com>
Signed-off-by: Rob Herring <robh@kernel.org>

A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml:
touchscreen@3e: reg:0:0: 56 was expected

The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models
was shipped with different addresses then the binding currently allows.
Change the reg property that any address will pass.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/
edt-ft5x06.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>

Add documentation for the interconnects and interconnect-names
properties for USB.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Renesas Multi-Function Timer Pulse Unit 2 (MTU2) Device Tree
binding documentation to json-schema.

Add missing properties.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

For version 1 to 3 of the device tree, this is the node full
path as a zero terminated string, starting with "/". The
following equation will not hold, since the node name has
been processed in the fdt_get_name().

	*pathp == '/'

For version 16 and later, this is the node unit name only
(or an empty string for the root node). So the above
equation will still not hold.

So the kbasename() is redundant, just remove it.
Signed-off-by: Qi Zheng <arch0.zheng@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX1 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX21 clock binding to DT schema format using json-schema,
can NOT find any CCM interrupt info from reference manual and DT file,
so interrupts property is removed from original binding doc.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX25 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX27 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX23 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX28 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX31 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX35 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX5 clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Converts documentation from txt format to yaml.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Document r8a7742 xhci support. The driver will use the fallback
compatible string "renesas,rcar-gen2-xhci", therefore no driver
change is needed.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

Document support for RZ/G1H (R8A7742) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

Add internal PCI bridge support for r8a7742 SoC. The Renesas RZ/G1H
(R8A7742) internal PCI bridge is identical to the R-Car Gen2 family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

Add USB PHY support for r8a7742 SoC. Renesas RZ/G1H (R8A7742)
USB PHY is identical to the R-Car Gen2 family.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

The binding example is missing the fallback compatible.
This is needed as the driver only matches against mt6577.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Rob Herring <robh@kernel.org>

A straightforward conversion of the ehci-mv binding to DT schema format
using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add unevaluatedProperties]
Signed-off-by: Rob Herring <robh@kernel.org>

A straightforward conversion of the the spi-pxa2xx binding to DT schema
format using json-schema.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add unevaluatedProperties]
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the marvell,mmp2-ccic binding to DT schema format using
json-schema. While at that this drops the "func" and "phy" clocks.

The driver consumes clocks with those names, but it's not clear
what are they for and they are not used in DT systems. "phy" is
probably a clock for the sensor and it would belong in the sensor
node.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: add additionalProperties]
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX thermal binding to DT schema format using json-schema
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the ingenic,jz4780-nand.txt doc file to ingenic,nand.yaml.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the ingenic,jz4780-nemc.txt doc file to ingenic,nemc.yaml.

The ingenic,jz4725b-nemc compatible string was added in the process,
with a fallback to ingenic,jz4740-nemc.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the MXS GPIO binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Document Device Tree bindings for the Renesas EMMA Mobile UART
Interface.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the Renesas DDR Bus Controller Device Tree binding documentation
to json-schema.

Drop referrals to driver behavior.
Make power-domains required, as it is present for all current users.
Update the example to match reality.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

A generic GIC block embedded in an SoC may be connected to an on-SoC
reset controller.  Hence allow the DTS writer to describe this relation,
by documenting the optional presence of a "reset" property.

This gets rid of "make dtbs_check" warnings like:

    arch/arm/boot/dts/r8a7791-porter.dt.yaml: interrupt-controller@f1001000: 'resets' does not match any of the regexes: '^v2m@[0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

make dtbs_check:

    arch/arm/boot/dts/r8a7740-armadillo800eva.dt.yaml: sound@fe1f0000: '#sound-dai-cells', 'clocks', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'

Fix this by documenting the missing properties.
Update the example to match reality.
While at it, improve the document title, and comment the various
compatible values with the corresponding SoC names.

Fixes: 2f52475b ("ASoC: fsi: switch to yaml base Documentation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>

make dtbs_check:

    arch/arm/boot/dts/r7s72100-rskrza1.dt.yaml: rtc@fcff1000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

Fix this by documenting the missing power-domains property.
Update the example to match reality.

Fixes: 7ae8b2f5 ("dt-bindings: rtc: rtc-sh: convert bindings to json-schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>

make dtbs_check:

    arch/arm/boot/dts/r7s72100-genmai.dt.yaml: camera@e8210000: 'clocks', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+'

Fix this by documenting the missing properties.
Update the example to match reality.

Fixes: 58361eaa ("dt-bindings: media: renesas,ceu: Convert to yaml")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX SYSCTR binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX TPM binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>

MikroTik (SIA Mikrotīkls) is a Latvian company who develop routers and
wireless ISP systems.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Rob Herring <robh@kernel.org>

Convert the i.MX7D clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>