- 05 Oct, 2014 40 commits
-
-
Guy Martin authored
commit 89206491 upstream. The current LWS cas only works correctly for 32bit. The new LWS allows for CAS operations of variable size. Signed-off-by:
Guy Martin <gmsoft@tuxicoman.be> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Al Viro authored
commit 7bd88377 upstream. return the value instead, and have path_init() do the assignment. Broken by "vfs: Fix absolute RCU path walk failures due to uninitialized seq number", which was Cc-stable with 2.6.38+ as destination. This one should go where it went. To avoid dummy value returned in case when root is already set (it would do no harm, actually, since the only caller that doesn't ignore the return value is guaranteed to have nd->root *not* set, but it's more obvious that way), lift the check into callers. And do the same to set_root(), to keep them in sync. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Richard Genoud authored
commit 35b675b9 upstream. In set_termios(), interrupts where not disabled if UART_ENABLE_MS() was false. Tested on at91sam9g35. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Michael Ellerman authored
commit 78e05b14 upstream. Similar to the previous commit which described why we need to add a barrier to arch_spin_is_locked(), we have a similar problem with spin_unlock_wait(). We need a barrier on entry to ensure any spinlock we have previously taken is visibly locked prior to the load of lock->slock. It's also not clear if spin_unlock_wait() is intended to have ACQUIRE semantics. For now be conservative and add a barrier on exit to give it ACQUIRE semantics. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Ellerman authored
commit 51d7d520 upstream. The kernel defines the function spin_is_locked(), which can be used to check if a spinlock is currently locked. Using spin_is_locked() on a lock you don't hold is obviously racy. That is, even though you may observe that the lock is unlocked, it may become locked at any time. There is (at least) one exception to that, which is if two locks are used as a pair, and the holder of each checks the status of the other before doing any update. Assuming *A and *B are two locks, and *COUNTER is a shared non-atomic value: The first CPU does: spin_lock(*A) if spin_is_locked(*B) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*A) And the second CPU does: spin_lock(*B) if spin_is_locked(*A) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*B) Although this is a strange locking construct, it should work. It seems to be understood, but not documented, that spin_is_locked() is not a memory barrier, so in the examples above and below the caller inserts its own memory barrier before acting on the result of spin_is_locked(). For now we assume spin_is_locked() is implemented as below, and we break it out in our examples: bool spin_is_locked(*LOCK) { LOAD l = *LOCK return l.locked } Our intuition is that there should be no problem even if the two code sequences run simultaneously such as: CPU 0 CPU 1 ================================================== spin_lock(*A) spin_lock(*B) LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) If one CPU gets the lock before the other then it will do the update and the other CPU will back off: CPU 0 CPU 1 ================================================== spin_lock(*A) LOAD b = *B spin_lock(*B) if b.locked # false LOAD a = *A else if a.locked # true smp_mb() # nothing LOAD r1 = *COUNTER spin_unlock(*B) r1++ STORE *COUNTER = r1 spin_unlock(*A) However in reality spin_lock() itself is not indivisible. On powerpc we implement it as a load-and-reserve and store-conditional. Ignoring the retry logic for the lost reservation case, it boils down to: spin_lock(*LOCK) { LOAD l = *LOCK l.locked = true STORE *LOCK = l ACQUIRE_BARRIER } The ACQUIRE_BARRIER is required to give spin_lock() ACQUIRE semantics as defined in memory-barriers.txt: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. On modern powerpc systems we use lwsync for ACQUIRE_BARRIER. lwsync is also know as "lightweight sync", or "sync 1". As described in Power ISA v2.07 section B.2.1.1, in this scenario the lwsync is not the barrier itself. It instead causes the LOAD of *LOCK to act as the barrier, preventing any loads or stores in the locked region from occurring prior to the load of *LOCK. Whether this behaviour is in accordance with the definition of ACQUIRE semantics in memory-barriers.txt is open to discussion, we may switch to a different barrier in future. What this means in practice is that the following can occur: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true LOAD b = *B LOAD a = *A STORE *A = a STORE *B = b if b.locked # false if a.locked # false else else smp_mb() smp_mb() LOAD r1 = *COUNTER LOAD r2 = *COUNTER r1++ r2++ STORE *COUNTER = r1 STORE *COUNTER = r2 # Lost update spin_unlock(*A) spin_unlock(*B) That is, the load of *B can occur prior to the store that makes *A visibly locked. And similarly for CPU 1. The result is both CPUs hold their lock and believe the other lock is unlocked. The easiest fix for this is to add a full memory barrier to the start of spin_is_locked(), so adding to our previous definition would give us: bool spin_is_locked(*LOCK) { smp_mb() LOAD l = *LOCK return l.locked } The new barrier orders the store to the lock we are locking vs the load of the other lock: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true STORE *A = a STORE *B = b smp_mb() smp_mb() LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) Although the above example is theoretical, there is code similar to this example in sem_lock() in ipc/sem.c. This commit in addition to the next commit appears to be a fix for crashes we are seeing in that code where we believe this race happens in practice. Signed-off-by:
-
Anton Blanchard authored
commit 85101af1 upstream. ABIv2 kernels are failing to backtrace through the kernel. An example: 39.30% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry __GI___libc_read The problem is in valid_next_sp() where we check that the new stack pointer is at least STACK_FRAME_OVERHEAD below the previous one. ABIv1 has a minimum stack frame size of 112 bytes consisting of 48 bytes and 64 bytes of parameter save area. ABIv2 changes that to 32 bytes with no paramter save area. STACK_FRAME_OVERHEAD is in theory the minimum stack frame size, but we over 240 uses of it, some of which assume that it includes space for the parameter area. We need to work through all our stack defines and rationalise them but let's fix perf now by creating STACK_FRAME_MIN_SIZE and using in valid_next_sp(). This fixes the issue: 30.64% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry pagecache_get_page generic_file_read_iter new_sync_read vfs_read sys_read syscall_exit __GI___libc_read Reported-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Johannes Stezenbach authored
commit d21ccfd0 upstream. In v3.15 the driver stopped to accept network packets after successful authentification, which could be worked around by passing the nohwcrypt=1 module parameter. This was not reproducible by everyone, and showed random behaviour in some tests. It was caused by an uninitialized variable introduced in 4ed1a8d4 ("ath9k_htc: use ath9k_cmn_rx_accept") and used in 341b29b9 ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78581 Fixes: 341b29b9 ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess") Signed-off-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Arend van Spriel authored
commit 87c47903 upstream. The firmware notifies about interface changes through the IF event which has a NO_IF flag that means host can ignore the event. This behaviour was introduced in the driver by: commit 2ee8382f Author: Arend van Spriel <arend@broadcom.com> Date: Sat Aug 10 12:27:24 2013 +0200 brcmfmac: ignore IF event if firmware indicates it It turns out that the IF event for the P2P_DEVICE also has this flag set, but the event should not be ignored in this scenario. The mentioned commit caused a regression in 3.12 kernel in creation of the P2P_DEVICE interface. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Wanpeng Li authored
commit 03bd4e1f upstream. The following bug can be triggered by hot adding and removing a large number of xen domain0's vcpus repeatedly: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group PGD 5a9d5067 PUD 13067 PMD 0 Oops: 0000 [#3] SMP [...] Call Trace: load_balance ? _raw_spin_unlock_irqrestore idle_balance __schedule schedule schedule_timeout ? lock_timer_base schedule_timeout_uninterruptible msleep lock_device_hotplug_sysfs online_store dev_attr_store sysfs_write_file vfs_write SyS_write system_call_fastpath Last level cache shared mask is built during CPU up and the build_sched_domain() routine takes advantage of it to setup the sched domain CPU topology. However, llc_shared_mask is not released during CPU disable, which leads to an invalid sched domainCPU topology. This patch fix it by releasing the llc_shared_mask correctly during CPU disable. Yasuaki also reported that this can happen on real hardware: https://lkml.org/lkml/2014/7/22/1018 His case is here: == Here is an example on my system. My system has 4 sockets and each socket has 15 cores and HT is enabled. In this case, each core of sockes is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-44, 90-104 Socket#3 | 45-59, 105-119 Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-44 and 90-104. When hot-removing socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30 remains having 0x3fff80000001fffc0000000. After that, when hot-adding socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-59 Socket#3 | 90-119 Then llc_shared_mask of CPU#30 becomes 0x3fff8000fffffffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-59 and 90-104. So the mask has the wrong value. Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by:
Linn Crosetto <linn@hp.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Feiner authored
commit dbab31aa upstream. This fixes the same bug as b43790ee ("mm: softdirty: don't forget to save file map softdiry bit on unmap") and 9aed8614 ("mm/memory.c: don't forget to set softdirty on file mapped fault") where the return value of pte_*mksoft_dirty was being ignored. To be sure that no other pte/pmd "mk" function return values were being ignored, I annotated the functions in arch/x86/include/asm/pgtable.h with __must_check and rebuilt. The userspace effect of this bug is that the softdirty mark might be lost if a file mapped pte get zapped. Signed-off-by:
Peter Feiner <pfeiner@google.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Jamie Liu <jamieliu@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Fabian Frederick authored
commit 6ff66ac7 upstream. Commit 0227d6ab ("fs/cachefiles: replace kerror by pr_err") didn't include newline featuring in original kerror definition Signed-off-by:
Fabian Frederick <fabf@skynet.be> Reported-by:
David Howells <dhowells@redhat.com> Acked-by:
-
David Rientjes authored
commit d4a5fca5 upstream. Since commit 45906855 ("mm/sl[aou]b: Common alignment code"), the "ralign" automatic variable in __kmem_cache_create() may be used as uninitialized. The proper alignment defaults to BYTES_PER_WORD and can be overridden by SLAB_RED_ZONE or the alignment specified by the caller. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=85031Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Andrei Elovikov <a.elovikov@gmail.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Joseph Qi authored
commit 5760a97c upstream. There is a deadlock case which reported by Guozhonghua: https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html This case is caused by &res->spinlock and &dlm->master_lock misordering in different threads. It was introduced by commit 8d400b81 ("ocfs2/dlm: Clean up refmap helpers"). Since lockres is new, it doesn't not require the &res->spinlock. So remove it. Fixes: 8d400b81 ("ocfs2/dlm: Clean up refmap helpers") Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
joyce.xue <xuejiufei@huawei.com> Reported-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Andreas Rohner authored
commit 56d7acc7 upstream. This bug leads to reproducible silent data loss, despite the use of msync(), sync() and a clean unmount of the file system. It is easily reproducible with the following script: ----------------[BEGIN SCRIPT]-------------------- mkfs.nilfs2 -f /dev/sdb mount /dev/sdb /mnt dd if=/dev/zero bs=1M count=30 of=/mnt/testfile umount /mnt mount /dev/sdb /mnt CHECKSUM_BEFORE="$(md5sum /mnt/testfile)" /root/mmaptest/mmaptest /mnt/testfile 30 10 5 sync CHECKSUM_AFTER="$(md5sum /mnt/testfile)" umount /mnt mount /dev/sdb /mnt CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)" umount /mnt echo "BEFORE MMAP:\t$CHECKSUM_BEFORE" echo "AFTER MMAP:\t$CHECKSUM_AFTER" echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT" ----------------[END SCRIPT]-------------------- The mmaptest tool looks something like this (very simplified, with error checking removed): ----------------[BEGIN mmaptest]-------------------- data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE, MAP_SHARED, fd, file_offset); for (i = 0; i < write_count; ++i) { memcpy(data + i * 4096, buf, sizeof(buf)); msync(data, file_size - file_offset, MS_SYNC)) } ----------------[END mmaptest]-------------------- The output of the script looks something like this: BEFORE MMAP: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile AFTER MMAP: 6604a1c31f10780331a6850371b3a313 /mnt/testfile AFTER REMOUNT: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile So it is clear, that the changes done using mmap() do not survive a remount. This can be reproduced a 100% of the time. The problem was introduced in commit 136e8770 ("nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary"). If the page was read with mpage_readpage() or mpage_readpages() for example, then it has no buffers attached to it. In that case page_has_buffers(page) in nilfs_set_page_dirty() will be false. Therefore nilfs_set_file_dirty() is never called and the pages are never collected and never written to disk. This patch fixes the problem by also calling nilfs_set_file_dirty() if the page has no buffers attached to it. [akpm@linux-foundation.org: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/] Signed-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Andrey Vagin authored
commit 7e882481 upstream. Currently we handle only ENOSPC. In case of other errors the file_handle variable isn't filled properly and we will show a part of stack. Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
-
Andrey Vagin authored
commit 1fc98d11 upstream. MAX_HANDLE_SZ is equal to 128, but currently the size of pad is only 64 bytes, so exportfs_encode_inode_fh can return an error. Signed-off-by:
-
Rasmus Villemoes authored
commit acbbe6fb upstream. The C operator <= defines a perfectly fine total ordering on the set of values representable in a long. However, unlike its namesake in the integers, it is not translation invariant, meaning that we do not have "b <= c" iff "a+b <= a+c" for all a,b,c. This means that it is always wrong to try to boil down the relationship between two longs to a question about the sign of their difference, because the resulting relation [a LEQ b iff a-b <= 0] is neither anti-symmetric or transitive. The former is due to -LONG_MIN==LONG_MIN (take any two a,b with a-b = LONG_MIN; then a LEQ b and b LEQ a, but a != b). The latter can either be seen observing that x LEQ x+1 for all x, implying x LEQ x+1 LEQ x+2 ... LEQ x-1 LEQ x; or more directly with the simple example a=LONG_MIN, b=0, c=1, for which a-b < 0, b-c < 0, but a-c > 0. Note that it makes absolutely no difference that a transmogrying bijection has been applied before the comparison is done. In fact, had the obfuscation not been done, one could probably not observe the bug (assuming all values being compared always lie in one half of the address space, the mathematical value of a-b is always representable in a long). As it stands, one can easily obtain three file descriptors exhibiting the non-transitivity of kcmp(). Side note 1: I can't see that ensuring the MSB of the multiplier is set serves any purpose other than obfuscating the obfuscating code. Side note 2: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <fcntl.h> #include <unistd.h> #include <assert.h> #include <sys/syscall.h> enum kcmp_type { KCMP_FILE, KCMP_VM, KCMP_FILES, KCMP_FS, KCMP_SIGHAND, KCMP_IO, KCMP_SYSVSEM, KCMP_TYPES, }; pid_t pid; int kcmp(pid_t pid1, pid_t pid2, int type, unsigned long idx1, unsigned long idx2) { return syscall(SYS_kcmp, pid1, pid2, type, idx1, idx2); } int cmp_fd(int fd1, int fd2) { int c = kcmp(pid, pid, KCMP_FILE, fd1, fd2); if (c < 0) { perror("kcmp"); exit(1); } assert(0 <= c && c < 3); return c; } int cmp_fdp(const void *a, const void *b) { static const int normalize[] = {0, -1, 1}; return normalize[cmp_fd(*(int*)a, *(int*)b)]; } #define MAX 100 /* This is plenty; I've seen it trigger for MAX==3 */ int main(int argc, char *argv[]) { int r, s, count = 0; int REL[3] = {0,0,0}; int fd[MAX]; pid = getpid(); while (count < MAX) { r = open("/dev/null", O_RDONLY); if (r < 0) break; fd[count++] = r; } printf("opened %d file descriptors\n", count); for (r = 0; r < count; ++r) { for (s = r+1; s < count; ++s) { REL[cmp_fd(fd[r], fd[s])]++; } } printf("== %d\t< %d\t> %d\n", REL[0], REL[1], REL[2]); qsort(fd, count, sizeof(fd[0]), cmp_fdp); memset(REL, 0, sizeof(REL)); for (r = 0; r < count; ++r) { for (s = r+1; s < count; ++s) { REL[cmp_fd(fd[r], fd[s])]++; } } printf("== %d\t< %d\t> %d\n", REL[0], REL[1], REL[2]); return (REL[0] + REL[2] != 0); } Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
-
Nicolas Iooss authored
commit c680e41b upstream. When calling epoll_ctl with operation EPOLL_CTL_DEL, structure epds is not initialized but ep_take_care_of_epollwakeup reads its event field. When this unintialized field has EPOLLWAKEUP bit set, a capability check is done for CAP_BLOCK_SUSPEND in ep_take_care_of_epollwakeup. This produces unexpected messages in the audit log, such as (on a system running SELinux): type=AVC msg=audit(1408212798.866:410): avc: denied { block_suspend } for pid=7754 comm="dbus-daemon" capability=36 scontext=unconfined_u:unconfined_r:unconfined_t tcontext=unconfined_u:unconfined_r:unconfined_t tclass=capability2 permissive=1 type=SYSCALL msg=audit(1408212798.866:410): arch=c000003e syscall=233 success=yes exit=0 a0=3 a1=2 a2=9 a3=7fffd4d66ec0 items=0 ppid=1 pid=7754 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="dbus-daemon" exe="/usr/bin/dbus-daemon" subj=unconfined_u:unconfined_r:unconfined_t key=(null) ("arch=c000003e syscall=233 a1=2" means "epoll_ctl(op=EPOLL_CTL_DEL)") Remove use of epds in epoll_ctl when op == EPOLL_CTL_DEL. Fixes: 4d7e30d9 ("epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arve Hjønnevåg <arve@android.com> Signed-off-by:
-
Patrick Palka authored
commit 000a7d66 upstream. We shouldn't set text_len in the code path that detects printk recursion because text_len corresponds to the length of the string inside textbuf. A few lines down from the line text_len = strlen(recursion_msg); is the line text_len += vscnprintf(text + text_len, ...); So if printk detects recursion, it sets text_len to 29 (the length of recursion_msg) and logs an error. Then the message supplied by the caller of printk is stored inside textbuf but offset by 29 bytes. This means that the output of the recursive call to printk will contain 29 bytes of garbage in front of it. This defect is caused by commit 458df9fd ("printk: remove separate printk_sched buffers and use printk buf instead") which turned the line text_len = vscnprintf(text, ...); into text_len += vscnprintf(text + text_len, ...); To fix this, this patch avoids setting text_len when logging the printk recursion error. This patch also marks unlikely() the branch leading up to this code. Fixes: 458df9fd ("printk: remove separate printk_sched buffers and use printk buf instead") Signed-off-by:
Patrick Palka <patrick@parcs.ath.cx> Reviewed-by:
Petr Mladek <pmladek@suse.cz> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Johannes Berg authored
commit bb512ad0 upstream. This reverts commit 24aa11ab. That commit was wrong since it uses data that hasn't even been set up yet, but might be a hold-over from a previous connection. Additionally, it seems like a driver-specific workaround that shouldn't have been in mac80211 to start with. Fixes: 24aa11ab ("mac80211: disable uAPSD if all ACs are under ACM") Reviewed-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 84261912 upstream. When updating what an ftrace_ops traces, if it is registered (that is, actively tracing), and that ftrace_ops uses the shared global_ops local_hash, then we need to update all tracers that are active and also share the global_ops' ftrace_hash_ops. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 5f151b24 upstream. The latest rewrite of ftrace removed the separate ftrace_ops of the function tracer and the function graph tracer and had them share the same ftrace_ops. This simplified the accounting by removing the multiple layers of functions called, where the global_ops func would call a special list that would iterate over the other ops that were registered within it (like function and function graph), which itself was registered to the ftrace ops list of all functions currently active. If that sounds confusing, the code that implemented it was also confusing and its removal is a good thing. The problem with this change was that it assumed that the function and function graph tracer can never be used at the same time. This is mostly true, but there is an exception. That is when the function profiler uses the function graph tracer to profile. The function profiler can be activated the same time as the function tracer, and this breaks the assumption and the result is that ftrace will crash (it detects the error and shuts itself down, it does not cause a kernel oops). To solve this issue, a previous change allowed the hash tables for the functions traced by a ftrace_ops to be a pointer and let multiple ftrace_ops share the same hash. This allows the function and function_graph tracer to have separate ftrace_ops, but still share the hash, which is what is done. Now the function and function graph tracers have separate ftrace_ops again, and the function tracer can be run while the function_profile is active. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 33b7f99c upstream. Currently the top level debug file system function tracer shares its ftrace_ops with the function graph tracer. This was thought to be fine because the tracers are not used together, as one can only enable function or function_graph tracer in the current_tracer file. But that assumption proved to be incorrect. The function profiler can use the function graph tracer when function tracing is enabled. Since all function graph users uses the function tracing ftrace_ops this causes a conflict and when a user enables both function profiling as well as the function tracer it will crash ftrace and disable it. The quick solution so far is to move them as separate ftrace_ops like it was earlier. The problem though is to synchronize the functions that are traced because both function and function_graph tracer are limited by the selections made in the set_ftrace_filter and set_ftrace_notrace files. To handle this, a new structure is made called ftrace_ops_hash. This structure will now hold the filter_hash and notrace_hash, and the ftrace_ops will point to this structure. That will allow two ftrace_ops to share the same hashes. Since most ftrace_ops do not share the hashes, and to keep allocation simple, the ftrace_ops structure will include both a pointer to the ftrace_ops_hash called func_hash, as well as the structure itself, called local_hash. When the ops are registered, the func_hash pointer will be initialized to point to the local_hash within the ftrace_ops structure. Some of the ftrace internal ftrace_ops will be initialized statically. This will allow for the function and function_graph tracer to have separate ops but still share the same hash tables that determine what functions they trace. Signed-off-by:
-
Felipe Balbi authored
commit 0b93a4c8 upstream. After commit 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) we created a situation where it was possible to hang a bulk/interrupt endpoint if we had more than one pending request in our queue and they were both started with a single Start Transfer command. The problems triggers because we had not enabled Transfer In Progress event for those endpoints and we were not able to process early giveback of requests completed without LST bit set. Fix the problem by finally enabling Xfer In Progress event for all endpoint types, except control. Fixes: 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) Reported-by:
Pratyush Anand <pratyush.anand@st.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Jens Axboe authored
commit 46f341ff upstream. Commit 2da78092 changed the locking from a mutex to a spinlock, so we now longer sleep in this context. But there was a leftover might_sleep() in there, which now triggers since we do the final free from an RCU callback. Get rid of it. Reported-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Trond Myklebust authored
commit 22fdcf02 upstream. This commit reverts the addition of lockdep checking to raw_seqcount_begin for the following reasons: 1) It violates the naming convention that raw_* functions should not do lockdep checks (a convention that is also followed by the other raw_*_seqcount_begin functions). 2) raw_seqcount_begin does not spin, so it can only be part of an ABBA deadlock in very special circumstances (for instance if a lock is held across the entire raw_seqcount_begin()+read_seqcount_retry() loop while also being taken inside the write_seqcount protected area). 3) It is causing false positives with some existing callers, and there is no non-lockdep alternative for those callers to use. None of the three existing callers (__d_lookup_rcu, netdev_get_name, and the NFS state code) appear to use the function in a manner that is ABBA deadlock prone. Fixes: 1ca7d67c: seqcount: Add lockdep functionality to seqcount/seqlock Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Waiman Long <Waiman.Long@hp.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/CAHQdGtRR6SvEhXiqWo24hoUh9AU9cL82Z8Z-d8-7u951F_d+5g@mail.gmail.comSigned-off-by:
-
J. Bruce Fields authored
commit 7c17705e upstream. Nikita Yuschenko reported that booting a kernel with init=/bin/sh and then nfs mounting without portmap or rpcbind running using a busybox mount resulted in: # mount -t nfs 10.30.130.21:/opt /mnt svc: failed to register lockdv1 RPC service (errno 111). lockd_up: makesock failed, error=-111 Unable to handle kernel paging request for data at address 0x00000030 Faulting instruction address: 0xc055e65c Oops: Kernel access of bad area, sig: 11 [#1] MPC85xx CDS Modules linked in: CPU: 0 PID: 1338 Comm: mount Not tainted 3.10.44.cge #117 task: cf29cea0 ti: cf35c000 task.ti: cf35c000 NIP: c055e65c LR: c0566490 CTR: c055e648 REGS: cf35dad0 TRAP: 0300 Not tainted (3.10.44.cge) MSR: 00029000 <CE,EE,ME> CR: 22442488 XER: 20000000 DEAR: 00000030, ESR: 00000000 GPR00: c05606f4 cf35db80 cf29cea0 cf0ded80 cf0dedb8 00000001 1dec3086 00000000 GPR08: 00000000 c07b1640 00000007 1dec3086 22442482 100b9758 00000000 10090ae8 GPR16: 00000000 000186a5 00000000 00000000 100c3018 bfa46edc 100b0000 bfa46ef0 GPR24: cf386ae0 c07834f0 00000000 c0565f88 00000001 cf0dedb8 00000000 cf0ded80 NIP [c055e65c] call_start+0x14/0x34 LR [c0566490] __rpc_execute+0x70/0x250 Call Trace: [cf35db80] [00000080] 0x80 (unreliable) [cf35dbb0] [c05606f4] rpc_run_task+0x9c/0xc4 [cf35dbc0] [c0560840] rpc_call_sync+0x50/0xb8 [cf35dbf0] [c056ee90] rpcb_register_call+0x54/0x84 [cf35dc10] [c056f24c] rpcb_register+0xf8/0x10c [cf35dc70] [c0569e18] svc_unregister.isra.23+0x100/0x108 [cf35dc90] [c0569e38] svc_rpcb_cleanup+0x18/0x30 [cf35dca0] [c0198c5c] lockd_up+0x1dc/0x2e0 [cf35dcd0] [c0195348] nlmclnt_init+0x2c/0xc8 [cf35dcf0] [c015bb5c] nfs_start_lockd+0x98/0xec [cf35dd20] [c015ce6c] nfs_create_server+0x1e8/0x3f4 [cf35dd90] [c0171590] nfs3_create_server+0x10/0x44 [cf35dda0] [c016528c] nfs_try_mount+0x158/0x1e4 [cf35de20] [c01670d0] nfs_fs_mount+0x434/0x8c8 [cf35de70] [c00cd3bc] mount_fs+0x20/0xbc [cf35de90] [c00e4f88] vfs_kern_mount+0x50/0x104 [cf35dec0] [c00e6e0c] do_mount+0x1d0/0x8e0 [cf35df10] [c00e75ac] SyS_mount+0x90/0xd0 [cf35df40] [c000ccf4] ret_from_syscall+0x0/0x3c The addition of svc_shutdown_net() resulted in two calls to svc_rpcb_cleanup(); the second is no longer necessary and crashes when it calls rpcb_register_call with clnt=NULL. Reported-by:
Nikita Yushchenko <nyushchenko@dev.rtsoft.ru> Fixes: 679b033d "lockd: ensure we tear down any live sockets when socket creation fails during lockd_up" Acked-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Larry Finger authored
commit c6651716 upstream. The Sitecom WLA-2102 adapter uses this driver. Reported-by:
Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
-
Eliad Peller authored
commit a5fe8e76 upstream. alpha2 is defined as 2-chars array, but is used in multiple places as string (e.g. with nla_put_string calls), which might leak kernel data. Solve it by simply adding an extra char for the NULL terminator, making such operations safe. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 849f5169 upstream. If pcpu_map_pages() fails midway, it unmaps the already mapped pages. Currently, it doesn't flush tlb after the partial unmapping. This may be okay in most cases as the established mapping hasn't been used at that point but it can go wrong and when it goes wrong it'd be extremely difficult to track down. Flush tlb after the partial unmapping. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit f0d27965 upstream. When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to free what has already been allocated. The invocation is across the whole requested range and pcpu_free_pages() will try to free all non-NULL pages; unfortunately, this is incorrect as pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't clear the pages array and thus the array may have entries from the previous invocations making the partial failure path free incorrect pages. Fix it by open-coding the partial freeing of the already allocated pages. Signed-off-by:
-
Honggang Li authored
commit 3189eddb upstream. Currently, only SMP system free the percpu allocation info. Uniprocessor system should free it too. For example, one x86 UML virtual machine with 256MB memory, UML kernel wastes one page memory. Signed-off-by:
Honggang Li <enjoymindful@gmail.com> Signed-off-by:
-
Jarkko Nikula authored
commit 324b0398 upstream. There is possibility with misconfigured pins that interrupt occurs instantly after setting irq_set_chained_handler() in gpiochip_set_chained_irqchip(). Now if handler gets called before irq_set_handler_data() the handler gets NULL handler data. Fix this by moving irq_set_handler_data() call before irq_set_chained_handler() in gpiochip_set_chained_irqchip(). Reviewed-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
James Ralston authored
commit 6cad1376 upstream. This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Robert Coulson authored
commit 39c627a0 upstream. After the conversion rate is changed, the zbits are not updated, but should be, since they are used later in the set_temp function. Fixes: a50d9a4d ("hwmon: (ds1621) Fix temperature rounding operations") Reported-by:
Murat Ilsever <murat.ilsever@gmail.com> Signed-off-by:
Robert Coulson <rob.coulson@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Hans de Goede authored
commit d2682118 upstream. The sys_vendor / product_name are somewhat generic unfortunately, so this may lead to some false positives. But nomux usually does no harm, where as not having it clearly is causing problems on the Avatar AVIU-145A6. https://bugzilla.kernel.org/show_bug.cgi?id=77391Reported-by:
Hugo P <saurosii@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit cc18a69c upstream. https://bugzilla.kernel.org/show_bug.cgi?id=69731Reported-by:
Jason Robinson <mail@jasonrobinson.me> Signed-off-by:
-
Dmitry Torokhov authored
commit c0120679 upstream. We are getting more and more reports about LG laptops not having functioning keyboard if we try to deactivate keyboard during probe. Given that having keyboard deactivated is merely "nice to have" instead of a hard requirement for probing, let's disable it on all LG boxes instead of trying to hunt down particular models. This change is prompted by patches trying to add "LG Electronics"/"ROCKY" and "LG Electronics"/"LW60-F27B" to the DMI list. https://bugzilla.kernel.org/show_bug.cgi?id=77051Reported-by:
Jaime Velasco Juan <jsagarribay@gmail.com> Reported-by:
Georgios Tsalikis <georgios@tsalikis.net> Tested-by:
-
Hans de Goede authored
commit 271329b3 upstream. Adjust Elantech signature validation to account fo rnewer models of touchpads. Reported-and-tested-by:
Màrius Monton <marius.monton@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 5715fc76 upstream. ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Reviewed-by:
-
