Drop duplicate reset method logging, whitespace changes.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Drop duplicate reset method logging, whitespace changes.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement hwmon API for reading/setting slow and fast PPT limit.

APU power is managed to system-level requirements through the PPT
(package power tracking) feature. PPT is intended to limit power to the
requirements of the power source and could be dynamically updated to
maximize APU performance within the system power budget.

Here FAST_PPT_LIMIT manages the ~10 ms moving average of APU power,
while SLOW_PPT_LIMIT manages the configurable, thermally significant
moving average of APU power (default ~5000 ms).

User could read slow/fast ppt limit using command "cat power*_cap" or
"sensors" in the hwmon device directory. User could adjust values of
slow/fast ppt limit as needed depending on workloads through command
"echo ## > power*_cap".

Example:
$ echo 15000000 > power1_cap
$ echo 18000000 > power2_cap
$ sensors
amdgpu-pci-0300
Adapter: PCI adapter
slowPPT:     9.04W (cap = 15.00 W)
fastPPT:     9.04W (cap = 18.00 W)

v2: align with existing interfaces for the getting/setting of PPT
    limits. Encode the upper 8 bits of limit value to distinguish
    slow and fast power limit type.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The original smu_get_power_limit callback accepts the power limit level
parameter as bool which limits to max and current. For possible needs to
retrieve other level like min, extend the parameter type using enum.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add PP messages for reading/setting Fast PPT and Slow PPT limit.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To achieve the best QoS for high priority compute jobs it is
required to limit waves on other compute pipes as well.
This patch will set min value in non high priority
mmSPI_WCL_PIPE_PERCENT_CS[0-3] registers to minimize the
impact of normal/low priority compute jobs over high priority
compute jobs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
On DCN1.0, need otg vertical line interrupt to get appropriate timing
to achieve specific feature request.

Add otg vertical interrupt0 support for registers which operation is
vertical sensitive.
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
In order to get appropriate timing for registers which
read/write is vertical line sensitive, add new IRQ source variable.
This interrupt is triggered by specific vertical line,
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

simplify the list operation.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

the soft gpu metrics is not asic related data structure.
unify them to reduce duplicate code.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add functions to support enable/disable rom clock gating and get rom
clock gating status.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Switch to smuio callbacks: use smuio v11_0_6 callbacks for
Sienna_cichlid and forward ASIC, use smuio v11_0 callbacks for the
other NV family ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Implement smuio v11_0_6 callbacks which will used by Sienna_Cichlid and
forward ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Support to program ASPM and LTR for Sienna Cichlid and forward ASIC.
Disable ASPM for Sienna Cichlid and forward ASIC by default.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable DCS

V1: Enable Async DCS.
V2: Add the ppfeaturemask bit to enable from the modprobe parameter.
V3:
1. add the flag to skip APU support.
2. remove the hunk for workload selection since
it doesn't impact the function.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The hw interface changed on arcturus so the old numbering
scheme doesn't work.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Align with Vangogh.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1467Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Instead of caching the value during amdgpu_device_init, just call the
function directly. This avoids issues where the unique_id hasn't been
saved by the time that KFD's topology snapshot is done (e.g. Arcturus).

KFD's topology information from the amdgpu_device was initially cached
at KFD initialization due to amdkfd and amdgpu being separate modules.
Now that they are combined together, we can directly call the functions
that we need and avoid this unnecessary duplication and complexity.

As a side-effect of this change, we also remove unique_id=0 for CPUs,
which is obviously not unique.

v2: Drop previous patch printing unique_id in hex
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The power limit and clock ragne are different in AC mode and DC mode.
Firmware does the setting after this feature is enabled.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable gfx wave limiting for gfx jobs before pushing high priority
compute jobs so that high priority compute jobs gets more resources
to finish early.

v2: use ring priority instead of job priority.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Wave limiting can be use to load balance high priority
compute jobs along with gfx jobs. When enabled, this will reserve
~75% of waves for compute jobs.

We do not need this from gfx10 onwards because >=gfx10 has
asynchronous compute tunneling to replace wave limit requirement.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For high priority compute to work properly we need to enable
wave limiting on gfx pipe. Wave limiting is done through writing
into mmSPI_WCL_PIPE_PERCENT_GFX register. Enable only one high
priority compute queue to avoid race condition between multiple
high priority compute queues writing that register simultaneously.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This patch consist of below related changes:

1 Rename ring->priority to ring->hw_prio.
2 Assign correct hardware ring priority.
3 Remove ring->priority_mutex as ring priority remains unchanged
  after initialization.
4 Remove unused ring->num_jobs.

v3: remove ring->num_jobs.
v2: remove ring->priority_mutex.

Fixes: 33abcb1f ("drm/amdgpu: set compute queue priority at mqd_init")
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The dm struct is only being used if DCN config is defined and this
causes a unused variable warning if DCN option is not set.

[How]
Remove the compile flag so the variable is used (there also seems to be
a duplicate guard due to a bad rebase) so remove the outer guard to fix
the warning.

Fixes this warning
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c: In function 'dm_set_vblank':
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:5380:33: warning: unused variable 'dm' [-Wunused-variable]

Fixes: 98ab5f35 ("drm/amd/display: Fix deadlock during gpu reset v3")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit 4c3a3292.

Bhawan's fix is better (less ifdefs), so revert this and apply Bhawan's.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

After all users of the 'dm' warnings got hidden in an #ifdef,
the compiler started warning about it being unused:

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5380:33: error: unused variable 'dm' [-Werror,-Wunused-variable]

Add another such #ifdef.

Fixes: 98ab5f35 ("drm/amd/display: Fix deadlock during gpu reset v3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210125124849.102037-1-arnd@kernel.org

Merge tag 'amd-drm-next-5.12-2021-02-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.12-2021-02-03:

amdgpu:
- Display fixes and cleanups
- Vangogh fixes
- Fix possible race when there are timeouts on two rings
- SR-IOV fixes
- Add missing license
- DCE 10/12 bpc fixes
- Display MALL fixes
- Fix SMU user preference settings persistence
- Fix retry in gem allocate
- Add new PCI DID
- Fix for manual fan speed control on cards where it was problematic
- Fix regression in pinning GTT
- Misc display fixes
- Misc code cleanups

amdkfd:
- Fix config handling
- Fix regression in buffer free

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204045717.3823-1-alexander.deucher@amd.comSigned-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'mediatek-drm-next-5.12' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next

Mediatek DRM Next for Linux 5.12

1. Decouple Mediatek DRM sub driver
2. Share mtk mutex driver for both DRM and MDP
3. Add support for SoC MT8183
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210204151750.7550-1-chunkuang.hu@kernel.org

Add matrix_bits and coeffs_precision to ccorr private data:
- matrix bits of mt8183 is 10
- matrix bits of mt8192 is 11
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Fix setting to follow hardware datasheet. The original error setting
affects mt8192 display.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

ccorr ctm matrix bits will be different in mt8192.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Enable dither function to improve the display quality.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Enable OVL_LAYER_SMI_ID_EN for multi-layer usecase, without this patch,
ovl will hang up when more than 1 layer enabled.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

1. Add ovl private data
2. Add rdma private data
3. Add gamma privte data
4. Add main and external path module for crtc create
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Not all SoC has dither function in gamma module.
Add private data to control this function setting.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

mt8183 gamma module will different with mt8173,
so separate gamma for adding private data.
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

Current implementation of mtk_dither_set() cast dev data to
struct mtk_ddp_comp_dev. But other devices with different dev data
would also call this function.

Separate necessary parameters out so other device components (dither,
gamma) can call this function.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

mtk mutex is used by DRM and MDP driver, and its function is SoC-specific,
so move it to soc folder.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>

Moving mutex resource management from client driver to  mutex driver
could prevent client drivers negotiating for resource management.
Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>