The Lenovo Yoga C630 is built on the SDM850 from Qualcomm, but this seem
to be similar enough to the SDM845 that we can reuse the sdm845.dtsi.

Supported by this patch is: keyboard, battery monitoring, UFS storage,
USB host and Bluetooth.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
[Lee] Reorder, change licence, remove non-upstream device node
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.4-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

RK3328 mmc clockrate limit and addition of vpu node as well
as a regulator fix for the rk3328-rock64.

* tag 'v5.4-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
  arm64: dts: rockchip: add rk3328 VPU node
  arm64: dts: rockchip: fix vcc_host_5v regulator for usb3 host

Link: https://lore.kernel.org/r/43564855.cWDBQSyQMS@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

Removal of the rk3288-fennec board which never made it to
any market.

* tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  dt-bindings: arm: rockchip: remove reference to fennec board
  ARM: dts: rockchip: remove rk3288 fennec board support

Link: https://lore.kernel.org/r/1718334.9BoTfW0Ujv@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-5.4-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.4, second round

 - Alternate flash support for Vesnin
 - Minor cleanups and fixes

* tag 'aspeed-5.4-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
  ARM; dts: aspeed: mihawk: File should not be executable
  ARM: dts: aspeed: swift: Change power supplies to version 2
  ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
  ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
  ARM: dts: aspeed-g4: Add all flash chips

Link: https://lore.kernel.org/r/CACPK8Xdp4gVuetmiu2bRTTH6oHhRrC7FELHWKVB2ZGSbPbH7HQ@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

According to the AST2500/AST2520 specs, these SoCs support up to 228 GPIO
pins. However, 'gpio-ranges' value in 'aspeed-g5.dtsi' file is currently
setting the upper limit to 220 which isn't allowing access to all their
GPIOs. The correct upper limit value is 232 (actual number is 228 plus a
4-GPIO hole in GPIOAB). Without this patch, GPIOs AC5 and AC6 do not work
correctly on a AST2500 BMC running Linux Kernel v4.19

Fixes: 2039f90d ("ARM: dts: aspeed-g5: Add gpio controller to devicetree")
Signed-off-by: Oscar A Perez <linux@neuralgames.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Remove the executable bit.

Fixes: 0a1dcf95 ("ARM: dts: aspeed: Add Mihawk BMC platform")
Signed-off-by: Joel Stanley <joel@jms.id.au>

Swift power supplies are version 2 of the IBM CFFPS.

Fixes: 8e8fd0cb ("ARM: dts: aspeed: Add Swift BMC machine")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Adds secondary SPI flash chip into dts for vesnin.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Adds wdt2 section with 'alt-boot' option into dts for vesnin.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The FMC supports five chip selects, so describe the five possible flash
chips.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Merge tag 'samsung-dt-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.4, part 2

1. Fix Exynos542x Chromebooks boot with multi_v7 defconfig,
2. Add GPU (Mali) support to Exynos5250 boards,
3. Minor cleanup for Exynos3250 ADC.

* tag 'samsung-dt-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
  ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
  ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
  ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
  ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
  ARM: dts: exynos: Remove not accurate secondary ADC compatible

Link: https://lore.kernel.org/r/20190904175002.10487-4-krzk@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Tested with kmscube and some glmark2* tests on arndale board.
Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Tested with kmscube and some glmark2* tests on Chromebook snow.
Frequency adapts with load.
Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Add nodes for GPU (Mali T604) to Exynos5250.
Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Required to have GPU voltage scaling working properly.
Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 5.4, please pull the following:

- Stefan does a bunch of preparatory work for supporting the Raspberry
  Pi 4in the next merge window correct register ranges (SPI, I2C,
  UART), define memory, HDMI and MMC properties at the board level

* tag 'arm-soc/for-5.4/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm283x: Enable HDMI at board level
  ARM: dts: bcm283x: Define memory at board level
  ARM: dts: bcm283x: Define MMC interfaces at board level
  ARM: bcm283x: Reduce register ranges for UART, SPI and I2C

Merge tag 'qcom-arm64-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 Updates for v5.4

* Add Lenovo Miix 630, HP Envy x2, and Asus Novago TP370QL support
* Assorted cleanups for SDM845 nodes
* Add video nodes, cpu coefficients, adsp, csdp, and
  fastrpc nodes for SDM845
* Add coresight for MSM8996, SDM845, and MSM8998
* Misc cleanups on QCS404 and PMS405
* Update memory map for QCS404
* Add wifi rails, update WCSS clocks, and add ADS unit names on QCS404
* Add Longcheer and Samsung Galaxy A3U/A5U support
* Add initial support for SM8150 and PM8150

* tag 'qcom-arm64-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
  arm64: dts: sdm845: Add parent clock for rpmhcc
  arm64: dts: qcom: sm8150: Add apps shared nodes
  arm64: dts: qcom: sm8150: Add reserved-memory regions
  arm64: dts: qcom: sm8150-mtp: Add regulators
  arm64: dts: qcom: sm8150-mtp: Add base dts file
  arm64: dts: qcom: pm8150l: Add base dts file
  arm64: dts: qcom: pm8150b: Add base dts file
  arm64: dts: qcom: pm8150: Add base dts file
  arm64: dts: qcom: sm8150: Add base dts file
  arm64: sdm845: add adsp and cdsp fastrpc nodes
  arm64: dts: sdm845: Add dynamic CPU power coefficients
  arm64: dts: qcom: qcs404: Update memory map to v3
  arm64: dts: qcom: qcs404-evb: Mark WCSS clocks protected
  arm64: dts: qcom: Add device tree for Longcheer L8150
  arm64: dts: qcom: Add device tree for Samsung Galaxy A3U/A5U
  dt-bindings: qcom: Document bindings for new MSM8916 devices
  dt-bindings: vendor-prefixes: Add Longcheer Technology Co., Ltd.
  arm64: dts: qcom: msm8996: Add Venus video codec DT node
  arm64: dts: qcom: Extend AOSS QMP node
  arm64: dts: qcom: msm8996: Add Coresight support
  ...

Merge tag 'davinci-for-v5.4/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt

Contains a patch to switch to more generic compatible for SPI NOR.
This helps SPI NOR to work on newer board variants.

* tag 'davinci-for-v5.4/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-evm: Use generic jedec, spi-nor for flash
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'bitmain-soc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain into arm/dt

Bitmain SoC changes for v5.4:

Most of the basic infrastructure is completed for BM1880 SoC except
common clock support. We are still couple of patchset away from
booting a distro from eMMC/SD with mainline. Below are the changes
for this cycle:

- Added Reset controller support to BM1880 SoC based on reset-simple
  driver.
- Modified pinctrl memory map for BM1880 SoC. The initial pinctrl support
  included the PWM registers as a part of the pinctrl memory map. But this
  turned out to be useless as PWM registers are not handling any pin muxing
  at all. So removed the PWM registers from pinctrl memory map.

* tag 'bitmain-soc-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-bitmain:
  arm64: dts: bitmain: Modify pin controller memory map
  arm64: dts: bitmain: Add reset controller support for BM1880 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.4 (round 2)
- new board: Khadas VIM3L (SM1/S905D3 SoC)
- support power domains on G12[AB] and SM1 SoCs
- DT binding fixups based on YAML schema
- add a bunch of remote control keymap
- enable DVFS on SM1/SEI610 board

* tag 'amlogic-dt64-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (44 commits)
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  arm64: dts: meson: g12a: audio clock controller provides resets
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: meson-gxm-khadas-vim2: use rc-khadas keymap
  arm64: dts: meson-gxl-s905w-tx3-mini: add rc-tx3mini keymap
  arm64: dts: meson-gxl-s905x-khadas-vim: use rc-khadas keymap
  arm64: dts: meson-gxbb-wetek-play2: add rc-wetek-play2 keymap
  arm64: dts: meson-gxbb-wetek-hub: add rc-wetek-hub keymap
  arm64: dts: meson-g12a-x96-max: add rc-x96max keymap
  arm64: dts: meson-g12b-odroid-n2: add rc-odroid keymap
  arm64: dts: meson-sm1-sei610: add USB support
  arm64: dts: meson-sm1-sei610: add HDMI display support
  arm64: dts: meson-g12: add Everything-Else power domain controller
  arm64: dts: meson: fix boards regulators states format
  arm64: dts: meson-gxbb-p201: fix snps, reset-delays-us format
  ...

Link: https://patchwork.kernel.org/patch/11122331/Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dts-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt

More Ux500 device tree updates for the v5.4 kernel:
- Drop TV-OUT muxgroup from the HREF pin control
- Fix up BU21013 touchpad from Dmitry
- Split of AB8500 config in its own DTSI
- Drop the unused USB regulator config
- Add proper thermal zone for the CPU

* tag 'ux500-dts-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500: Update thermal zone
  ARM: dts: ux500: Remove ab8500_ldo_usb regulator from device tree
  ARM: dts: ux500: Move ab8500 nodes to ste-ab8500.dtsi
  ARM: ux500: improve BU21013 touchpad bindings
  ARM: dts: ux500: Drop TV-out muxgroup on HREFs

Link: https://lore.kernel.org/r/CACRpkdZ9Xvx+rg-hFVgG61_i2CdQSs+nZq5FXkkK2-3Ce9ooWg@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt64 for 5.4 (part 1)

 - Add mailbox support on Armada 37xx
 - Add cpu clock node needed for CPU freq on Armada 7K/8K
 - Enhance CP110 COMPHY support used by PCIe, USB3 and SATA

* tag 'mvebu-dt64-5.4-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
  arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply
  arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes
  arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes
  arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes
  arm64: dts: marvell: Add CP110 COMPHY clocks
  arm64: dts: marvell: armada-37xx: add mailbox node

Link: https://lore.kernel.org/r/875zmhzjml.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

mvebu dt for 5.4 (part 1)

 - Disable the kirkwood RTC that doesn't work on the ts219 board

* tag 'mvebu-dt-5.4-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: ts219: disable the SoC's RTC

Link: https://lore.kernel.org/r/878srdzjpj.fsf@FE-laptopSigned-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for 5.4

 - style cleanup for at91sam9x5 based boards
 - avoid colliding node and property names

* tag 'at91-5.4-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: at91sam9x5dm.dtsi: Style cleanup
  ARM: dts: at91: at91sam9x5_lcd.dtsi: Style cleanup
  ARM: dts: at91: at91sam9xx5ek: Style cleanup
  ARM: dts: at91: at91sam9g15: Style cleanup
  ARM: dts: at91: kizboxmini: Style cleanup
  ARM: dts: at91: cosino: Style cleanup
  ARM: dts: at91: ariettag25: style cleanup
  ARM: dts: at91: ariag25: Style cleanup
  ARM: dts: at91: Add label for sam9x5's internal RTC
  dt-bindings: add vendor prefix "acme" for "Acme Systems srl"
  ARM: dts: at91: Avoid colliding 'display' node and property names

Link: https://lore.kernel.org/r/20190825202642.GA18853@piout.netSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.4:
 - New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse,
   PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board.
 - Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM.
 - Update OPP table according to latest data sheet and add opp-suspend
   to OPP table for i.MX8MQ and i.MX8MM.
 - Add IDEL states for i.MX8MM SoC.
 - Correct I2C clock divider for Layerscape SoCs.
 - Add series alias and LPUART baud clock for i.MX8QXP SoC.
 - Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5
   board.
 - Enable USB1 and Type-C support for i.MX8MM EVK board.
 - Add Thermal Monitor Unit support for LS1028A SoC.
 - Misc small update and correction on Layerscape and i.MX8 support.

* tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
  arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
  arm64: dts: fsl: add support for Hummingboard Pulse
  arm64: dts: ls1088a: update gpio compatible
  arm64: dts: imx: Add i.mx8mq nitrogen8m basic dts support
  arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller
  arm64: dts: ls1088a: Add the DSPI controller node
  arm64: dts: imx8mm: Enable cpu-idle driver
  arm64: dts: ls1028a: Add esdhc node in dts
  arm64: dts: ls1028a: Add properties node for Display output pixel clock
  arm64: dts: lx2160a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: Fix incorrect I2C clock divider
  arm64: dts: ls1012a: Fix incorrect I2C clock divider
  arm64: dts: ls1088a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: fix gpio nodes
  arm64: dts: ls1028a: Add Thermal Monitor Unit node
  arm64: dts: imx8mq-evk: Unbypass audio_pll1
  arm64: dts: imx8mm: Add opp-suspend property to OPP table
  arm64: dts: imx8mq: Add opp-suspend property to OPP table
  arm64: dts: ls1088a: Revise gpio registers to little-endian
  arm64: dts: add the console node for DPAA2 platforms
  ...

Link: https://lore.kernel.org/r/20190825153237.28829-6-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

i.MX arm32 device tree changes for 5.4:
 - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and
   PHYTEC phyBOARD-Segin based on i.MX6ULL.
 - A series from Andrey Smirnov to update vf610-zii boards on I2C
   pinmux, switch watchdog, GPIO expander IRQ.
 - Move GIC node into soc node for i.MX6 SoCs.
 - Add OV5645 camera support for imx6qdl-wandboard board.
 - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri.
 - Use simple-mfd instead of simple-bus for i.MX6 ANATOP.
 - Move the native-mode property inside the display-timings node for
   various i.MX25 and i.MX27 boards.
 - Add EDMA devices for i.MX7ULP SoC.
 - A series from Stefan Riedmueller to update imx6ul-phytec-segin board
   on various devices.
 - Use OF graph to describe the display for opos6uldev board.
 - Misc random updates on i.MX7/6 boards.

* tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits)
  ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander
  ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards
  ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz
  ARM: dts: pbab01: correct rtc vendor
  ARM: vf610-zii-cfu1: Add node for switch watchdog
  ARM: dts: imx6: drop gpmi-nand address and size cells
  ARM: dts: imx6: replace simple-bus by simple-mfd for anatop
  ARM: dts: imx6qdl-colibri: add phy to fec
  ARM: dts: imx7-colibri: add recovery for I2C for iMX7
  ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet
  ARM: dts: imx7-colibri: prepare module device tree for FlexCAN
  ARM: dts: imx7-colibri: disable HS400
  ARM: dts: imx7-colibri: make sure module supplies are always on
  ARM: dts: imx7d: cl-som-imx7: add compatible for phy
  ARM: dts: imx7d: cl-som-imx7: make ethernet work again
  ARM: dts: imx6ul: Add csi node
  ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings
  ARM: dts: apf27dev: native-mode is part of display-timings
  ARM: dts: edb7211: native-mode is part of display-timings
  ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings
  ...

Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX device tree update with new clocks:
 - A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board
   device tree support.
 - Add DSP device tree support for i.MX8QXP SoC.

* tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8qxp: Add DSP DT node
  arm64: dts: imx8mn: Add cpu-freq support
  arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support
  arm64: dts: imx8mn-ddr4-evk: Add i2c1 support
  arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support
  arm64: dts: imx8mn: Add gpio-ranges property
  arm64: dts: freescale: Add i.MX8MN dtsi support
  clk: imx8: Add DSP related clocks
  clk: imx: Add support for i.MX8MN clock driver
  clk: imx: Add API for clk unregister when driver probe fail
  clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usage
  dt-bindings: imx: Add clock binding doc for i.MX8MN

Link: https://lore.kernel.org/r/20190825153237.28829-4-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-bindings-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings update for 5.4
 - Add SoC bindings for i.MX8MN.
 - Add board bindings for pico-pi-imx8m, Hummingboard Pulse, imx8mq
   nitrogen, i.MX8QXP AI_ML, ls1046a-frwy etc.
 - Add vendor prefix for Anvo-Systems and Einfochips.
 - Update LPUART bindings for i.MX8QXP clock requirement.
 - Update imx-weim bindings for optional burst clock mode support.
 - Update EEPROM bindings for Anvo ANV32E61W device support.

* tag 'imx-bindings-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add Kontron i.MX6UL N6310 compatibles
  dt-bindings: eeprom: at25: Add Anvo ANV32E61W
  dt-bindings: vendor-prefixes: Add Anvo-Systems
  dt-bindings: arm: fsl: add Hummingboard Pulse
  dt-bindings: arm: imx: add imx8mq nitrogen support
  dt-bindings: fsl: dspi: Add fsl,ls1088a-dspi compatible string
  dt-bindings: arm: imx: Add the soc binding for i.MX8MN
  dt-bindings: bus: imx-weim: document optional burst clock mode
  dt-bindings: arm: fsl: Add the pico-pi-imx8m board
  dt-bindings: arm: Document i.MX8QXP AI_ML board binding
  dt-bindings: Add Vendor prefix for Einfochips
  dt-bindings: arm: nxp: Add device tree binding for ls1046a-frwy board
  dt-bindings: serial: lpuart: add the clock requirement for imx8qxp
  dt-bindings: arm: fsl: Add support for ZII i.MX7 RMU2 board

Link: https://lore.kernel.org/r/20190825153237.28829-3-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.4

New machines:

 - Facebook Wedge100, Wedge40 and Minipack
 - Lenovo Hr855xg2
 - Wistron Mihawk

There's a few other updates, notably some changes to to use the newly
added SDHCI driver.

* tag 'aspeed-5.4-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: swift: Add eMMC device
  ARM: dts: aspeed: Enable first MMC slot on AST2500 EVB
  ARM: dts: aspeed: Describe SD controllers
  ARM: dts: aspeed: Add Mihawk BMC platform
  ARM: dts: aspeed: fp5280g2: Fix power supply address
  ARM: dts: aspeed: tiogapass: Add Riser card
  ARM: dts: aspeed: tiogapass: Move battery sensor
  ARM: dts: aspeed: Add Facebook Wedge100 BMC
  ARM: dts: aspeed: Add Facebook Wedge40 BMC
  ARM: dts: aspeed: swift: Fix FSI GPIOs
  ARM: dts: aspeed: Add SGPM pinmux
  ARM: dts: aspeed: tiogapass: Add VR devices
  ARM: dts: aspeed: Add Lenovo Hr855xg2 BMC
  ARM: dts: aspeed: Add Facebook Minipack BMC

Link: https://lore.kernel.org/r/CACPK8XfKHpNYXNE_VRaLeGUQa7-hkmUS0nsPfaeSLE4sckKFHg@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

dts changes for omap variants for v5.4

Remove regulator-boot-off properties that we never had in the mainline
kernel so they won't do anything. We add stdout-path for gta04, and
make am335x-boneblue use am335x-osd335x-common.dtsi file.

* tag 'omap-for-v5.4/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-boneblue: Use of am335x-osd335x-common.dtsi
  ARM: dts: gta04: define chosen/stdout-path
  ARM: dts: omap3-n950-n9: Remove regulator-boot-off property
  ARM: dts: am335x-cm-t335: Remove regulator-boot-off property

Link: https://lore.kernel.org/r/pull-1566599057-142651@atomide.com-2Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.3-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8183:
- fix pwrap interrupt number
- add i2c notes

dt-bindings:
- add compatible for mt6779
- add mt6779 uart and sysirq compatible

* tag 'v5.3-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: irq: mtk, sysirq: add support for mt6779
  dt-bindings: mtk-uart: add mt6779 uart bindings
  dt-bindings: mediatek: add support for mt6779 reference board
  arm64: dts: mt8183: add I2C nodes
  arm64: dts: mt8183: fix pwrap gic number

Link: https://lore.kernel.org/r/def8fb77-fce4-097d-7ae2-8c4670bc09c1@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

add support for the mt7629 reference board

* tag 'v5.3-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm: dts: mediatek: add basic support for MT7629 SoC

Link: https://lore.kernel.org/r/e236f659-2851-21b8-1873-314cd72ed6be@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Allwinner DT changes for 5.4

Our usual pile of patches for the next release, which include mostly:
  - More fixes thanks to the DT validation using the YAML bindings
  - IR receiver support on the H6
  - SPDIF support on the H6
  - I2C Support on the H6
  - CSI support on the A20
  - RTC support on the H6
  - New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC

* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits)
  arm64: dts: allwinner: orange-pi-3: Enable WiFi
  ARM: dts: sunxi: Add missing watchdog clocks
  ARM: dts: sunxi: Add missing watchdog interrupts
  arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
  ARM: dts: sun7i: Add CSI0 controller
  arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
  dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
  ARM: dts: v3s: Change the timers compatible
  ARM: dts: h3: Change the timers compatible
  ARM: dts: a83t: Change the timers compatible
  ARM: dts: a23/a33: Change the timers compatible
  ARM: dts: sun6i: Add missing timers interrupts
  ARM: dts: sun5i: Add missing timers interrupts
  ARM: dts: sun4i: Add missing timers interrupts
  dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
  arm64: dts: allwinner: h6: Introduce Tanix TX6 board
  dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
  arm64: allwinner: h6: add I2C nodes
  dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
  ARM: dts: sunxi: Add mdio bus sub-node to GMAC
  ...

Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhostSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-bindings-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.4 (take two)

  - Renesas DT binding doc filename cleanups,
  - R-Car Gen3 and RZ/G1 updates for the R-Car CAN and CANFD DT
    bindings.

* tag 'renesas-dt-bindings-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: can: rcar_can: document r8a77470 support
  dt-bindings: can: rcar_canfd: document r8a77995 support
  dt-bindings: can: rcar_can: document r8a77995 support
  dt-bindings: can: rcar_can: document r8a77990 support
  dt-bindings: rcar-{csi2,vin}: Rename bindings documentation files
  dt-bindings: rcar-imr: Rename bindings documentation file
  dt-bindings: Rename file of DT bindings for Renesas memory controllers

Link: https://lore.kernel.org/r/20190823123643.18799-6-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm64-dt-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM64 DT updates for v5.4 (take two)

  - Sort nodes in various SoC and board DTSes,
  - HDMI sound for HiHope RZ/G2M and R-Car M3-N Salvator-X(S) boards,
  - Limit EtherAVB to 100Mbps on the Ebisu and Draak boards,
  - Small fixes and improvements.

* tag 'renesas-arm64-dt-for-v5.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (21 commits)
  arm64: dts: renesas: Update 'vsps' properties for readability
  arm64: dts: renesas: r8a77965-salvator-x(s): Enable HDMI sound
  arm64: dts: renesas: r8a774c0: Fix register range of display node
  arm64: dts: renesas: r8a77970: Sort nodes
  arm64: dts: renesas: r8a7796: Sort nodes
  arm64: dts: renesas: r8a774c0: Sort nodes
  arm64: dts: renesas: r8a774c0: cat874: Sort nodes
  arm64: dts: renesas: r8a774a1: Sort nodes
  arm64: dts: renesas: r8a77980: Fix IPMMU-VC0 base address
  arm64: dts: renesas: ebisu, draak: Limit EtherAVB to 100Mbps
  arm64: dts: renesas: hihope-common: Add HDMI audio support
  arm64: dts: renesas: r8a774c0: cat874: Add definition for 12V regulator
  arm64: dts: renesas: r8a774c0: Point LVDS0 to its companion LVDS1
  arm64: dts: renesas: r8a77995: Sort nodes
  arm64: dts: renesas: r8a77995: draak: Sort nodes
  arm64: dts: renesas: r8a77990: Sort nodes
  arm64: dts: renesas: r8a77990: ebisu: Sort nodes
  arm64: dts: renesas: r8a77980: v3hsk: Sort nodes
  arm64: dts: renesas: r8a77980: condor: Sort nodes
  arm64: dts: renesas: r8a77970: v3msk: Sort nodes
  ...

Link: https://lore.kernel.org/r/20190823123643.18799-4-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.4

  - Fix HSCIF PM Domain on R-Car H1,
  - PMU support for RZ/G1C.

* tag 'renesas-arm-dt-for-v5.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: r8a77470: Add PMU device node
  ARM: dts: r8a7779: Use SYSC "always-on" PM Domain for HSCIF

Link: https://lore.kernel.org/r/20190823123643.18799-2-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.4

Highlights
- new SoCs (G12B family): S922X, A311D
- new SoCs (SM1 family): S905X3
- new board: SEI Robotics SEI610 (SM1/S905X3)
- new board: Khadas VIM3 (G12B/A311D)
- DVFS/CPUfreq support on G12[AB] family

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (40 commits)
  arm64: dts: add support for SM1 based SEI Robotics SEI610
  dt-bindings: arm: amlogic: add SEI Robotics SEI610 bindings
  dt-bindings: arm: amlogic: add SM1 bindings
  arm64: dts: meson-g12b-odroid-n2: enable DVFS
  arm64: dts: meson-g12b-khadas-vim3: add initial device-tree
  dt-bindings: arm: amlogic: fix x96-max/sei510 section in amlogic.yaml
  arm64: dts: amlogic: g12 CPU timers stop in suspend
  arm64: dts: meson-g12b: support a311d and s922x cpu operating points
  dt-bindings: arm: amlogic: add support for the Khadas VIM3
  dt-bindings: arm: amlogic: add bindings for the Amlogic G12B based A311D SoC
  dt-bindings: arm: amlogic: add bindings for G12B based S922X SoC
  arm64: dts: meson: add video decoder entries
  arm64: dts: meson-gx: add video decoder entry
  dt-bindings: media: amlogic,vdec: add default compatible
  arm64: dts: meson: add ethernet fifo sizes
  arm64: dts: meson-g12b: add cpus OPP tables
  arm64: dts: meson-g12a: enable DVFS on G12A boards
  arm64: dts: meson-g12a: add cpus OPP table
  arm64: dts: meson-g12-common: add pwm_a on GPIOE_2 pinmux
  arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi
  ...

Link: https://lore.kernel.org/r/7hr25fbi4v.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.4

Highlights
- odroid-c1: use MAC address from efuse
- add VDD_EE regulator to several boards

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroidc1: use the MAC address stored in the eFuse
  ARM: dts: meson8b: mxq: add the VDDEE regulator
  ARM: dts: meson8b: odroidc1: add the VDDEE regulator
  ARM: dts: meson8b: ec100: add the VDDEE regulator
  ARM: dts: meson8b: add the PWM_D output pin
  ARM: dts: meson8b: add ethernet fifo sizes

Link: https://lore.kernel.org/r/7hzhk3bi96.fsf@baylibre.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_updates_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.4
- Add reset properties for various peripherals
	- QSPI OCP and DMA on Arria10
	- DMA on Agilex/Stratix10
- Update NAND controller bindings to match driver update
- Add NAND controller to Stratix10
- VINING FPGA board fixups
	- Update button mapping
	- Adjust GMAC1 clock and TXD skew settings
- Add missing reset-names for dma controller

* tag 'socfpga_dts_updates_for_v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: add missing reset-names for dma
  ARM: dts: socfpga: Adjust GMAC1 clock and TXD lines skew on VINING FPGA
  ARM: dts: socfpga: Fix up button mapping on VINING FPGA
  arm64: dts: stratix10: Add NAND device node
  ARM: dts: socfpga: update to new Denali NAND binding
  arm64: dts: agilex/stratix10: Add reset properties for DMA
  ARM: dts: socfpga: add reset properties for DMA
  ARM: dts: socfpga: add the QSPI OCP reset property on arria10

Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt

PWM-Fan and nor-flash for the RockPro64, a better display mode for
the Kevin Chromebook and a new board the Leez P710 SBC.

* tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC
  arm64: dts: rockchip: enable internal SPI flash for RockPro64.
  arm64: dts: rockchip: Add PWM fan for RockPro64
  arm64: dts: rockchip: Specify override mode for kevin panel

Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.org
Link: https://lore.kernel.org/r/2362486.gYoCZEsBuK@philSigned-off-by: Arnd Bergmann <arnd@arndb.de>