- 08 May, 2023 40 commits
-
-
Martin K. Petersen authored
Don Brace <don.brace@microchip.com> says: These patches are based on Martin Petersen's 6.4/scsi-queue tree https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git 6.4/scsi-queue This set of changes consists of: * Map entire BAR 0. The driver was mapping up to and including the controller registers, but not all of BAR 0. * Add PCI IDs to support new controllers. * Clean up some code by removing unnecessary NULL checks. This cleanup is a result of a Coverity report. * Correct a rare memory leak whenever pqi_sas_port_add_rhpy() returns an error. This was Suggested by: Yang Yingliang <yangyingliang@huawei.com> * Remove atomic operations on variable raid_bypass_cnt. Accuracy is not required for driver operation. Change type from atomic_t to unsigned int. * Correct a rare drive hot-plug removal issue where we get a NULL io_request. We added a check for this condition. * Turn on NCQ priority for AIO requests to disks comprising RAID devices. * Correct byte aligned writew() operations on some ARM servers. Changed the writew() to two writeb() operations. * Change how the driver checks for a sanitize operation in progress. We were using TEST UNIT READY. We removed the TEST UNIT READY code and are now using the controller's firmware information in order to avoid issues caused by drives failing to complete TEST UNIT READY. * Some customers have been requesting that we add the NUMA node to /sys/block/sd<scsi device>/device like the nvme driver does. * Update the copyright information to match the current year. * Bump the driver version to 2.1.22-040. Link: https://lore.kernel.org/r/20230428153712.297638-1-don.brace@microchip.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Martin K. Petersen authored
Pranav Prasad <pranavpp@google.com> says: This patch series enhances debug logs for pm80xx HW events, and provides a minor fix in the case of a hard reset. The log enhancement involves changing the log severity level to enable logging for HW events which consequently help debug disk discovery issues. 1. Changed log severity level from MSG to EVENT for HW events. Enhanced the HW event logs by adding the phyid. 2. Enabled INIT logging. 3. Log portid along with the PHY_UP event. 4. Print phyid and portid sent as part of device registration request. 5. Log port state during HW events. 6. Update phy_state and phy_attached to correct values after a hard reset. Link: https://lore.kernel.org/r/20230418190101.696345-1-pranavpp@google.comSigned-off-by: -
Martin K. Petersen authored
Jason Yan <yanaijie@huawei.com> says: Three patches to remove two empty branches and a little code simplification. Link: https://lore.kernel.org/r/20230421093744.1583609-1-yanaijie@huawei.comSigned-off-by:
-
Martin K. Petersen authored
Nilesh Javali <njavali@marvell.com> says: Please apply the qla2xxx driver enhancement and bug fixes to the scsi tree at your earliest convenience. Link: https://lore.kernel.org/r/20230428075339.32551-1-njavali@marvell.comSigned-off-by:
-
Martin K. Petersen authored
Justin Tee <justintee8345@gmail.com> says: Update lpfc to revision 14.2.0.12 This patch set contains fixes flagged by code analyzer tools, introduces a new CQE status to handle DMA errors, and replaces the usage of blk interrupts with threaded interrupts. The patches were cut against Martin's 6.4/scsi-queue tree. Link: https://lore.kernel.org/r/20230417191558.83100-1-justintee8345@gmail.comSigned-off-by:
-
Dan Carpenter authored
There is already a test for "if (val == state)" earlier so it's not possible here. Delete the dead code. Fixes: 9006e398 ("scsi: ufs-mediatek: Do not gate clocks if auto-hibern8 is not entered yet") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/68fce64f-4970-45f1-807e-6c0eecdfcdc2@kili.mountainReviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
-
Jinhong Zhu authored
Smatch reported: drivers/scsi/qedf/qedf_main.c:3056 qedf_alloc_global_queues() warn: missing unwind goto? At this point in the function, nothing has been allocated so we can return directly. In particular the "qedf->global_queues" have not been allocated so calling qedf_free_global_queues() will lead to a NULL dereference when we check if (!gl[i]) and "gl" is NULL. Fixes: 61d8658b ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.") Signed-off-by:
Jinhong Zhu <jinhongzhu@hust.edu.cn> Link: https://lore.kernel.org/r/20230502140022.2852-1-jinhongzhu@hust.edu.cnReviewed-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Keoseong Park authored
mcq_mode_ops uses only param_{set,get}_bool(). Therefore, convert module_param_cb() to module_param() and remove the mcq_mode_ops. Signed-off-by:Keoseong Park <keosung.park@samsung.com> Link: https://lore.kernel.org/r/20230427094420epcms2p1043333a3e0c0cf58e66164e0b83b3b02@epcms2p1Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Harshit Mogalapalli authored
smatch warnings: drivers/scsi/mpi3mr/mpi3mr_transport.c:1449 mpi3mr_expander_add() warn: returning -1 instead of -ENOMEM is sloppy No functional change. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20230419064256.2532069-1-harshit.m.mogalapalli@oracle.comSigned-off-by:
-
Don Brace authored
Reviewed-by:
Gerry Morong <gerry.morong@microchip.com> Reviewed-by:
Scott Benesh <scott.benesh@microchip.com> Reviewed-by:
Mike McGowen <mike.mcgowen@microchip.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by:
Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/20230428153712.297638-13-don.brace@microchip.comSigned-off-by:
-
Don Brace authored
Update copyright to current year. Reviewed-by:
-
Don Brace authored
Although NUMA node is a PCIe device level attribute, it was requested the NUMA node be added for each exposed device similar to NVMe disks. Example for NVMe: /sys/block/nvme1c1n1/device/numa_node Example for smartpqi: /sys/block/sdh/device/numa_node cat /sys/block/sdh/device/numa_node 0 Reviewed-by:
David Strahan <david.strahan@microchip.com> Reviewed-by:
-
Kevin Barnett authored
Stop sending driver-initiated TURs to physical devices during driver load/rescan. Note: This does not affect SML initiated TURs. Some Linux kernels can cause lengthy delays in OS boot if the kernel detects that a drive is being sanitized/erased. We were using TURs to detect if a sanitize/erase was in progress. Some devices do not return the TUR in a timely manner, causing driver load/rescan stalls. Reviewed-by:
Scott Teel <scott.teel@microchip.com> Reviewed-by:
-
Don Brace authored
Correct OOPs on ARM servers during driver init. The driver attempts to update FW with max_feature_supported value using a writew() kernel call using a byte aligned address. This fails on some ARM systems. Change the writew() to two writeb() calls to update this value. Reviewed-by:
-
Gilbert Wu authored
Enable NCQ priority feature for the RAID path when AIO path is disabled. Move function pqi_is_io_high_priority() up to avoid adding a prototype. Remove unused argument ctrl_info. Reviewed-by:
Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by:
-
Murthy Bhat authored
Prevent OS crashes when a drive is hot removed during I/O stress test. The I/O request pointer can be invalid if block layer provides incorrect multi-queue host tag. This can lead to invalid I/O request pointer dereference. Reviewed-by:
Murthy Bhat <Murthy.Bhat@microchip.com> Signed-off-by:
-
Mike McGowen authored
Reduce CPU contention when incrementing variable raid_bypass_cnt. Remove the atomic operations for this variable by changing the atomic to an unsigned int and replace atomic operations with standard operations. The value is only checked that it is increasing and accuracy is not required. Reviewed-by:
-
Don Brace authored
Free rphy when pqi_sas_port_add_rphy() returns an error. If pqi_sas_port_add_rphy() returns an error, the 'rphy' allocated in sas_end_device_alloc() needs to be freed. It should be noted that no issues were ever reported. Reviewed-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Kevin Barnett authored
Remove an unnecessary check for a NULL pointer. This unnecessary check was flagged by Coverity. Reviewed-by:
-
David Strahan authored
All PCI ID entries in Hex. Add PCI IDs for ZTE controllers: VID / DID / SVID / SDID ---- ---- ---- ---- ZTE SmartROC3200 RS344-16i 4G 9005 / 028f / 1cf2 / 0804 ZTE SmartROC3200 RS345-16i 8G 9005 / 028f / 1cf2 / 0805 ZTE SmartIOC2200 RS346-16i 9005 / 028f / 1cf2 / 0806 ZTE SmartROC3200 RM344-16i 4G 9005 / 028f / 1cf2 / 54da ZTE SmartROC3200 RM345-16i 8G 9005 / 028f / 1cf2 / 54db ZTE SmartIOC2200 RM346-16i 9005 / 028f / 1cf2 / 54dc Add PCI IDs for ByteDance controllers: VID / DID / SVID / SDID ---- ---- ---- ---- ByteHBA JGH43014-8 9005 / 028f / 1e93 / 1005 Add PCI IDs for IBM controllers: VID / DID / SVID / SDID ---- ---- ---- ---- IBM 4-Port 24G SAS 9005 / 028f / 1014 / 0718 Add PCI IDs for Cloudnine controllers: VID / DID / SVID / SDID ---- ---- ---- ---- SmartHBA P6600-8i 9005 / 028f / 1f51 / 1001 SmartRAID P7604-8i 9005 / 028f / 1f51 / 1002 SmartHBA P6600-8e 9005 / 028f / 1f51 / 1003 SmartRAID P7604-8e 9005 / 028f / 1f51 / 1004 SmartHBA P6600-16i 9005 / 028f / 1f51 / 1005 SmartRAID P7608-16i 9005 / 028f / 1f51 / 1006 SmartHBA P6600-8i8e 9005 / 028f / 1f51 / 1007 SmartRAID P7608-8i8e 9005 / 028f / 1f51 / 1008 SmartHBA P6600-16e 9005 / 028f / 1f51 / 1009 SmartRAID P7608-16e 9005 / 028f / 1f51 / 100a Reviewed-by: -
Mike McGowen authored
Map full length of PCI BAR 0 at driver init. During driver initialization, the driver must make a kernel call to map the controller registers into kernel address space. A parameter to this call is the length of the memory to be mapped. The driver was specifying the wrong length. Reviewed-by:
-
Nilesh Javali authored
Update version to 10.02.08.300-k. Signed-off-by:
Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230428075339.32551-8-njavali@marvell.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
-
Quinn Tran authored
System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed. Cc: stable@vger.kernel.org Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
-
Quinn Tran authored
System crash, where driver is accessing scsi layer's memory (scsi_cmnd->device->host) to search for a well known internal pointer (vha). The scsi_cmnd was released back to upper layer which could be freed, but the driver is still accessing it. 7 [ffffa8e8d2c3f8d0] page_fault at ffffffff86c010fe [exception RIP: __qla2x00_eh_wait_for_pending_commands+240] RIP: ffffffffc0642350 RSP: ffffa8e8d2c3f988 RFLAGS: 00010286 RAX: 0000000000000165 RBX: 0000000000000002 RCX: 00000000000036d8 RDX: 0000000000000000 RSI: ffff9c5c56535188 RDI: 0000000000000286 RBP: ffff9c5bf7aa4a58 R8: ffff9c589aecdb70 R9: 00000000000003d1 R10: 0000000000000001 R11: 0000000000380000 R12: ffff9c5c5392bc78 R13: ffff9c57044ff5c0 R14: ffff9c56b5a3aa00 R15: 00000000000006db ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 8 [ffffa8e8d2c3f9c8] qla2x00_eh_wait_for_pending_commands at ffffffffc0646dd5 [qla2xxx] 9 [ffffa8e8d2c3fa00] __qla2x00_async_tm_cmd at ffffffffc0658094 [qla2xxx] Remove access of freed memory. Currently the driver was checking to see if scsi_done was called by seeing if the sp->type has changed. Instead, check to see if the command has left the oustanding_cmds[] array as sign of scsi_done was called. Cc: stable@vger.kernel.org Signed-off-by:
-
Quinn Tran authored
Task management command hangs where a side band chip reset failed to nudge the TMF from it's current send path. Add additional error check to block TMF from entering during chip reset and along the TMF path to cause it to bail out, skip over abort of marker. Cc: stable@vger.kernel.org Signed-off-by:
-
Quinn Tran authored
Task management command failed with status 2Ch which is a result of too many task management commands sent to the same target. Hence limit task management commands to 8 per target. Reported-by:
-
Quinn Tran authored
Task management cmd failed with status 30h which means FW is not able to finish processing one task management before another task management for the same lun. Hence add wait for completion of marker to space it out. Reported-by:
Himanshu Madhani <himanshu.madhani@oracle.com <mailto:himanshu.madhani@oracle.com>> Signed-off-by:
-
Quinn Tran authored
Add queue flush for task management command, before placing it on the wire. Do IO flush for all Request Q's. Reported-by:
-
Jason Yan authored
To be consistent with sas_check_edge_expander_topo(), factor out sas_check_fanout_expander_topo(). And remove the comment since we are not spilling over 80 colums now. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/20230421093744.1583609-4-yanaijie@huawei.comReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Jason Yan authored
There is an empty "all good" branch in sas_check_parent_topology(). We can reverse the test statement and remove the empty branch. Moreover, factor out a helper sas_check_edge_expander_topo() to make the code more readable. Signed-off-by:
-
Jason Yan authored
In sas_check_eeds() there is an empty branch. We can reverse the test expression and then remove the empty branch. Also the test expression is a little bit complex so it deserves an individual function. And make the continuing prototype lines indented after the opening parenthesis to follow the standard coding style. Signed-off-by:
-
Justin Tee authored
Update lpfc version to 14.2.0.12. Signed-off-by:
Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20230417191558.83100-8-justintee8345@gmail.comSigned-off-by:
-
Justin Tee authored
It has been determined that the threaded IRQ API accomplishes effectively the same performance metrics as blk_irq_poll. As blk_irq_poll is mostly scheduled by the softirqd and handled in softirq context, this is not entirely desired from a Fibre Channel driver context. A threaded IRQ model fits cleaner. This patch replaces the blk_irq_poll logic with threaded IRQ. Signed-off-by:
-
Justin Tee authored
A new RCQE status value indicating DMA failure when transferring asynchronously received data to an RQE is introduced. Such errors are unexpected and handlers are updated to log KERN_ERR and dump lpfc's debug trace buffer to kmsg. Signed-off-by:
-
Justin Tee authored
The CMF_SYNC_WQE command is updated to use an 8-bit field sync period. All related variables used to calculate congestion warning notifications are updated to 8-bit fields accordingly. Signed-off-by:
-
Justin Tee authored
The SCSI version of the abort handler routine, lpfc_abort_handler(), takes the lpfc_cmd->buf_lock and then phba->hbalock. Make the same change for the NVMe abort path, lpfc_nvme_fcp_abort(), to have consistent lock ordering logic between the two abort paths. Signed-off-by:
-
Justin Tee authored
Smatch detected a double free path because lpfc_nlp_not_used() releases an ndlp object before reaching lpfc_nlp_put() at the end of lpfc_cmpl_els_logo_acc(). Remove the outdated lpfc_nlp_not_used() routine. In lpfc_mbx_cmpl_ns_reg_login(), replace the call with lpfc_nlp_put(). In lpfc_cmpl_els_logo_acc(), replace the call with lpfc_unreg_rpi() and keep the lpfc_nlp_put() at the end of the routine. If ndlp's rpi was registered, then lpfc_unreg_rpi()'s completion routine performs the final ndlp clean up after lpfc_nlp_put() is called from lpfc_cmpl_els_logo_acc(). Otherwise if ndlp has no rpi registered, the lpfc_nlp_put() at the end of lpfc_cmpl_els_logo_acc() is the final ndlp clean up. Fixes: 4430f7fd ("scsi: lpfc: Rework locations of ndlp reference taking") Cc: <stable@vger.kernel.org> # v5.11+ Reported-by:
-
Justin Tee authored
For SES LUNs with scsi_device sector_size member set to zero, there is no point to log an LBA. When verbose FCP driver logging is enabled, sanity check sector_size before calling scsi_get_lba() on a scsi_cmnd. Signed-off-by:
-
Changyuan Lyu authored
Add a wait timeout to prevent the kernel from waiting for the GET_NVMD response forever during probe. Add a check for the controller state before issuing GET_NVMD request. Signed-off-by:
Changyuan Lyu <changyuanl@google.com> Signed-off-by:
Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230419175502.919999-1-pranavpp@google.comSigned-off-by:
-
Changyuan Lyu authored
Update phy_attached, phy_state, and port_state to correct values after a hard rest. Without this patch, after a successful hard reset, phy_attached is still 0, as a result, any following hard reset will cause a PHY START to be issued first. Signed-off-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
