- 01 Oct, 2018 7 commits
-
-
Satendra Singh Thakur authored
Use the drm_display_mode_to_videomode function to calculate front/ back porches and sync length. Cc: Madhur Verma <madhur.verma@samsung.com> Cc: Hemanshu Srivastava <hemanshu.s@samsung.com> Signed-off-by:
Satendra Singh Thakur <satendra.t@samsung.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-2-stefan@agner.ch
-
Stefan Agner authored
The result of drm_crtc_index() is unused. Remove the call and the unused variable. Signed-off-by:
-
Ville Syrjälä authored
The log functions don't modify the passed in infoframe so make it const. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-4-ville.syrjala@linux.intel.comAcked-by:
Hans Verkuil <hans.verkuil@cisco.com>
-
Ville Syrjälä authored
To make sure the infoframe unpack functions don't end up examining stack garbage or oopsing, let's pass in the size of the buffer. v2: Convert tda1997x.c as well (kbuild test robot) Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
Ville Syrjälä authored
The unpack functions just read from the passed in buffer, so make it const. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. For drm_modes.c, the full node path is already printed out, so printing just the node name a 2nd time is redundant and can be removed. Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Acked-by:
Rob Clark <robdclark@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. v2: * rebase onto fbdev rework Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20180926113623.22679-1-tzimmermann@suse.deSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 30 Sep, 2018 1 commit
-
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926120650.25614-1-tzimmermann@suse.de
-
- 28 Sep, 2018 6 commits
-
-
Heiko Stuebner authored
The rk3328 uses a dw-hdmi controller with an external hdmi phy from Innosilicon which uses the generic phy framework for access. Add the necessary data and the compatible for the rk3328 to the rockchip dw-hdmi driver. changes in v5: - disable CEC_5V option to make CEC actually work (Jonas) changes in v3: - reword as suggested by Rob to show that it's a dw-hdmi + Inno phy Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Tested-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Zheng Yang <zhengyang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de
-
Heiko Stuebner authored
When using special phy handling operations we'll often need access to the rockchip_hdmi struct. As the chip-data that occupies the phy_data pointer initially gets assigned to the rockchip_hdmi struct, we can now re-use this phy_data pointer to hold the reference to the rockchip_hdmi struct and use this reference later on. Inspiration for this comes from meson and sunxi dw-hdmi, which are using the same method. changes in v3: - reword commit message Signed-off-by:
-
Heiko Stuebner authored
Some variants of the dw-hdmi on Rockchip socs use a separate phy block accessed via the generic phy framework, so allow them to be included if such a phy reference is found. Signed-off-by:
-
Heiko Stuebner authored
Some newer Rockchip SoCs use an Innosilicon hdmiphy accessed via general mmio, so allow these to be referenced via the regular phy interfaces and therefore add optional phy-related properties to the binding. Signed-off-by:
-
Heiko Stuebner authored
So far we always encountered socs with 2 output crtcs needing the driver to tell the hdmi block which output to connect to. But there also exist socs with only one crtc like the rk3228, rk3328 and rk3368. So adapt the register field to simply carry a negative value to signal that no output-switching is necessary. changes in v3: - fixed wording issue found by Robin Murphy Signed-off-by:
-
Heiko Stuebner authored
In some IP implementations the reading of the phy-type may be broken. One example are the Rockchip rk3228 and rk3328 socs that use a separate vendor-type phy from Innosilicon but still report the HDMI20_TX type. So allow the glue driver to force the vendor-phy for these cases. In the future it may be necessary to allow forcing other types, but for now we'll keep it simply to the case actually seen in the wild. changes in v3: - only allow forcing vendor type, as suggested by Laurent Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
-
- 27 Sep, 2018 23 commits
-
-
Benjamin Gaignard authored
Hardware allow to read the position in scanout buffer so we can use this information to make wait of vblank more accurate. Active area bounds (start, end, total height) have already been computed and written in ltdc registers, read them and get the current line position to compute vpos value. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by:
Yannick Fertré <yannick.fertre@st.com> Tested-by:
-
Stefan Mavrodiev authored
This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The panel is used with different LCDs (currently from 480x272 to 1280x800). A small EEPROM chip is used for identification, which holds some factory data and timing requirements. Signed-off-by:
Stefan Mavrodiev <stefan@olimex.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1531383729-13932-1-git-send-email-stefan@olimex.com
-
Marco Felsch authored
Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the simple-panel driver. Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
-
Chen-Yu Tsai authored
This panel is marketed as Banana Pi 7" LCD display. On the back is a sticker denoting the model name S070WV20-CT16. This is a 7" 800x480 panel connected through a 24-bit RGB interface. However the panel only does 262k colors. Depending on the variant, the PCB attached to the panel module either supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel itself. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Reviewed-by:
-
Heiko Stuebner authored
There is no need to check innolux->base.dev when trying to remove the panel, as that variable is always set directly before the panel gets added and will still be available on panel_remove. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Giulio Benetti authored
Add documentation for S043WQ26H-CT7 panel Signed-off-by:
Giulio Benetti <giulio.benetti@micronovasrl.com> Reviewed-by:
-
Giulio Benetti authored
This patch adds support for CDTech S043WQ26H-CT7 480x272 4.3" panel to DRM simple panel driver. Signed-off-by:
-
Giulio Benetti authored
Add documentation for S070WV95-CT16 panel Signed-off-by:
-
Giulio Benetti authored
This patch adds support for CDTech S070WV95-CT16 800x480 7" panel to DRM simple panel driver. Signed-off-by:
-
Giulio Benetti authored
This adds a vendor prefix "cdtech" for CDTech(H.K.) Electronics Limited Website: www.cdtech-lcd.com Signed-off-by:
-
Fabio Estevam authored
There is a missing ">" character in Marco's email. Fix it. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Fabio Estevam authored
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by:
-
Andrzej Hajda authored
Panel timings were taken from vendor code and are not fully correct - refresh rate is about 50Hz instead of 60Hz. The patch fixes it. Signed-off-by:
-
Hans de Goede authored
GPD has done it again, make a nice device (good), use way too generic DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly). Because of the too generic DMI strings this entry is also doing bios-date matching, so the gpd_win2 data struct may very well need to be updated with some extra bios-dates in the future. Reported-and-tested-by: russianneuromancer@ya.ru Acked-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180909133457.10636-3-hdegoede@redhat.com
-
Arnd Bergmann authored
The variable is declared in an #ifdef section, but the user is now unconditional, which leads to a build failure: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'? Remove the remaining #ifdef as well. Fixes: f53705fd ("drm/imx: Use drm_fbdev_generic_setup()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de
-
Heiko Stuebner authored
The hs_start interrupt on rk3188 fires at the start of a new frame, so serves essentially the same purpose as the dsp_hold_valid irq in checking when the last frame got delivered when going to standby. So define it to fix a hang on atomic_disable of the vop because the completion never really completed before. Fixes: 428e15cc ("drm/rockchip: vop: add rk3188 vop definitions") Signed-off-by:
Sandy Huang <hjc@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180923123730.14706-1-heiko@sntech.de
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
Thomas Zimmermann <contact@tzimmermann.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180701132415.10161-1-contact@tzimmermann.org
-
Jernej Skrabec authored
R40 DE2 mixers are similar to those found in A83T, except it needs different clock settings. Add a compatibles for them. Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-14-jernej.skrabec@siol.net
-
Chen-Yu Tsai authored
This reverts commit 3510e7a7. During the 4.19 merge window for drm-misc, two patches critical to supporting the display pipeline on the Allwinner R40 SoC were missed. They were applied later but missed the merge window deadline. As a result 4.19-rc1 kernel would crash on the R40 when it couldn't parse the new device tree structure. We ended up removing support for the R40 display pipeline for 4.19. Since the missing patches are already merged for 4.20, we can now revert the commit that removed support. Signed-off-by:
-
Sean Paul authored
Backmerging 4.19-rc5 to pick up sun4i fix Signed-off-by: -
Dave Airlie authored
Sean Paul requested an -rc5 backmerge from some sun4i fixes. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
- A crash fix founded in recent linux-next from John Garry - One sparse warning fix from Souptick Joarder - Some xxx_unref cleanup from Thomas Zimmermann Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car DU support for the D3 and E3 SoCs (v4.20) Signed-off-by:
-
- 26 Sep, 2018 3 commits
-
-
Thomas Zimmermann authored
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by:
-
Stefan Agner authored
The driver is mostly in maintenance mode. Using drm-misc is a good fit and should make maintenance a bit easier. Signed-off-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20180926125034.4095-1-stefan@agner.ch
-
Leonard Crestez authored
The lcdif block is only powered on when display is active so plane updates when not enabled are not valid. Writing to an unpowered IP block is mostly ignored but can trigger bus errors on some chips. Prevent this situation by switching to drm_atomic_helper_commit_tail_rpm and having the drm core ensure atomic_plane_update is only called while the crtc is active. This avoids having to keep track of "enabled" bits inside the mxsfb driver. This also requires handling the vblank event for disable from mxsfb_pipe_disable. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Suggested-by:
-
