- 20 Oct, 2022 1 commit
-
-
Ankit Nautiyal authored
For cases where DP has HDMI2.1 sink and FRL Link issues are detected, reset the flag to state FRL trained status before restarting FRL training. Fixes: 9488a030 ("drm/i915: Add support for enabling link status and recovery") Cc: Swati Sharma <swati2.sharma@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> (v2) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221011063447.904649-2-ankit.k.nautiyal@intel.com
-
- 19 Oct, 2022 1 commit
-
-
Nirmoy Das authored
Print returned error code for better debuggability. References: https://gitlab.freedesktop.org/drm/intel/-/issues/7211Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Reviewed-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014154655.14075-1-nirmoy.das@intel.com
-
- 18 Oct, 2022 4 commits
-
-
Anshuman Gupta authored
DGFX platforms has lmem and cpu can access the lmem objects via mmap and i915 internal i915_gem_object_pin_map() for i915 own usages. Both of these methods has pre-requisite requirement to keep GFX PCI endpoint in D0 for a supported iomem transaction over PCI link. (Refer PCIe specs 5.3.1.4.1) Both DG1/DG2 have a known hardware bug that violates the PCIe specs and support the iomem read write transaction over PCIe bus despite endpoint is D3 state. Due to above H/W bug, we had never observed any issue with i915 runtime PM versus lmem access. But this issue becomes visible when PCIe gfx endpoint's upstream bridge enters to D3, at this point any lmem read/write access will be returned as unsupported request. But again this issue is not observed on every platform because it has been observed on few host machines DG1/DG2 endpoint's upstream bridge does not bind with pcieport driver. which really disables the PCIe power savings and leaves the bridge at D0 state. We need a unique interface to read/write from lmem with runtime PM wakeref protection something similar to intel_uncore_{read, write}, keep autosuspend control to 'on' on all discrete platforms, until we have a unique interface to read/write from lmem. This just change the default autosuspend setting of i915 on dGPU, user can still change it to 'auto'. v2: - Modified the commit message and subject with more information. - Changed the Fixes tag to LMEM support commit. [Joonas] - Changed !HAS_LMEM() Cond to !IS_DGFX(). [Rodrigo] Fixes: b908be54 ("drm/i915: support creating LMEM objects") Suggested-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Anshuman Gupta <anshuman.gupta@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221014113258.1284226-1-anshuman.gupta@intel.com
-
Andrzej Hajda authored
GEN7_DOP_CLOCK_GATE_ENABLE bit should be cleared, not inverse. The bug was introduced during conversion to intel_uncore_rmw helper. Suggested-by:
Matt Roper <matthew.d.roper@intel.com> Fixes: 8cee664d ("drm/i915: use proper helper for register updates") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
Platforms prior to MTL do not have a separate media and graphics version. On platforms where GMD id is not supported, reuse the graphics ip version, release info for media. The rest of the IP graphics, display versions would be copied during driver creation. While at it warn if GMD is not used for platforms greater than gen12. v2: - Use simple assignment to copy contents of the structure(JaniN) Fixes: c2c70752 ("drm/i915: Read graphics/media/display arch version from hw") Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
Radhakrishna Sripada authored
Rename struct ip_version to intel_ip_version to comply with the naming conventions for structures. Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
- 17 Oct, 2022 1 commit
-
-
José Roberto de Souza authored
Workaround 1607297627 was missed for Alderlake-P, so here extending it to it and adding the fixes tag so this WA is backported to all stable kernels. v2: - fixed subject - added Fixes tag BSpec: 54369 Cc: <stable@vger.kernel.org> # v5.17+ Fixes: dfb924e3 ("drm/i915/adlp: Remove require_force_probe protection") Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017132432.112850-1-jose.souza@intel.com
-
- 14 Oct, 2022 1 commit
-
-
Imre Deak authored
The GPU reset involves a display suspend/resume sequence, but this is done without suspending/resuming the encoders. The encoder HW readout code during resume however assumes that the encoders were suspended/resumed, at least on TypeC platforms where the TC PHYs must be left in a disconnected state during encoder-suspend, and the PHY's TypeC mode must be initialized already during encoder-resume. Since the above issue occurs only in case the display recovery during GPU reset is simulated in CI tests (on new platforms w/o the GPU reset clobbering the display), this patch fixes the issue by simply restoring the saved display state in this case w/o doing a display HW state readout / sanitization first. This also fixes the WARN below introduced by commit a82796a2 ("drm/i915: Fix TypeC mode initialization during system resume") <4> [319.983309] ------------[ cut here ]------------ <4> [319.983313] i915 0000:00:02.0: drm_WARN_ON(dig_port->tc_link_refcount != 1) <4> [319.983341] WARNING: CPU: 10 PID: 268 at drivers/gpu/drm/i915/display/intel_tc.c:751 intel_tc_port_sanitize_mode+0x239/0x290 [i915] <4> [319.983407] Modules linked in: fuse snd_hda_codec_hdmi i915 x86_pkg_temp_thermal mei_hdcp coretemp wmi_bmof r8153_ecm cdc_ether kvm_intel usbnet r8152 mii kvm prime_numbers snd_hda_intel ttm snd_intel_dspcfg irqbypass drm_buddy e1000e crct10dif_pclmul snd_hda_codec crc32_pclmul drm_display_helper ptp snd_hwdep ghash_clmulni_intel snd_hda_core drm_kms_helper pps_core mei_me syscopyarea video i2c_i801 snd_pcm sysfillrect i2c_smbus sysimgblt mei fb_sys_fops intel_lpss_pci wmi <4> [319.983483] CPU: 10 PID: 268 Comm: kworker/10:1H Not tainted 6.0.0-rc7-CI_DRM_12200-g394e575b57e9+ #1 <4> [319.983486] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P LP5 RVP, BIOS ADLPFWI1.R00.2313.A00.2107301001 07/30/2021 <4> [319.983488] Workqueue: events_highpri heartbeat [i915] <4> [319.983536] RIP: 0010:intel_tc_port_sanitize_mode+0x239/0x290 [i915] <4> [319.983600] Code: 85 d2 75 03 48 8b 17 48 89 14 24 e8 e1 dc 2d e1 48 8b 14 24 48 c7 c1 f8 db 5b a0 48 c7 c7 3e 3c 5e a0 48 89 c6 e8 45 d7 66 e1 <0f> 0b e9 20 fe ff ff 0f 0b 49 c7 c0 8b 3c 5e a0 e9 9e fe ff ff 48 <4> [319.983601] RSP: 0018:ffffc90001617a30 EFLAGS: 00010286 <4> [319.983604] RAX: 0000000000000000 RBX: ffff88811f9d2000 RCX: 0000000000000001 <4> [319.983606] RDX: 0000000080000001 RSI: ffffffff8231e8cd RDI: 00000000ffffffff <4> [319.983607] RBP: ffff888121e98000 R08: 0000000000000000 R09: c0000000ffffc134 <4> [319.983608] R10: 00000000000d6078 R11: ffffc900016178c8 R12: ffff88811f9d3838 <4> [319.983609] R13: ffff88811f9d397d R14: ffff888121e98000 R15: 0000000000000000 <4> [319.983611] FS: 0000000000000000(0000) GS:ffff8882a7300000(0000) knlGS:0000000000000000 <4> [319.983612] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [319.983613] CR2: 00007fe7397f1e18 CR3: 0000000006612003 CR4: 0000000000770ee0 <4> [319.983615] PKRU: 55555554 <4> [319.983616] Call Trace: <4> [319.983617] <TASK> <4> [319.983621] intel_ddi_sync_state+0x3f/0x90 [i915] <4> [319.983698] intel_modeset_setup_hw_state+0x3a3/0x1440 [i915] <4> [319.983777] ? intel_gt_reset_global+0xeb/0x160 [i915] <4> [319.983839] ? __intel_display_resume+0x15/0xe0 [i915] <4> [319.983909] __intel_display_resume+0x15/0xe0 [i915] <4> [319.983979] intel_display_finish_reset+0x58/0x130 [i915] <4> [319.984048] intel_gt_reset_global+0xf3/0x160 [i915] <4> [319.984107] ? intel_reset_guc.cold.62+0x5d/0x5d [i915] <4> [319.984189] ? 0xffffffff81000000 <4> [319.984192] ? queue_work_node+0x90/0x90 <4> [319.984202] intel_gt_handle_error+0x2c2/0x410 [i915] <4> [319.984267] ? _raw_spin_unlock_irqrestore+0x54/0x70 <4> [319.984271] ? lockdep_hardirqs_on+0xbf/0x140 <4> [319.984276] ? intel_guc_find_hung_context+0x19e/0x1d0 [i915] <4> [319.984352] reset_engine+0x99/0xd0 [i915] <4> [319.984399] ? __drm_printfn_seq_file+0x20/0x20 <4> [319.984406] heartbeat+0x4cd/0x4f0 [i915] <4> [319.984454] process_one_work+0x272/0x5b0 <4> [319.984461] worker_thread+0x37/0x370 <4> [319.984465] ? process_one_work+0x5b0/0x5b0 <4> [319.984467] kthread+0xed/0x120 <4> [319.984470] ? kthread_complete_and_exit+0x20/0x20 <4> [319.984474] ret_from_fork+0x1f/0x30 <4> [319.984484] </TASK> <4> [319.984485] irq event stamp: 36107 <4> [319.984487] hardirqs last enabled at (36113): [<ffffffff811391d6>] __up_console_sem+0x66/0x70 <4> [319.984492] hardirqs last disabled at (36118): [<ffffffff811391bb>] __up_console_sem+0x4b/0x70 <4> [319.984494] softirqs last enabled at (34316): [<ffffffff81e00323>] __do_softirq+0x323/0x48e <4> [319.984497] softirqs last disabled at (34309): [<ffffffff810c16b8>] irq_exit_rcu+0xb8/0xe0 <4> [319.984499] ---[ end trace 0000000000000000 ]--- v2: - Instead of trying to fix the suspend/resume sequence, restore simply the state w/o the HW readout/sanitization step. (Ville) References: https://lore.kernel.org/intel-gfx/20221005175251.3586272-1-imre.deak@intel.com/T/#mcfac180a67f6048096d09fa04347aa088291fafb Closes: https://gitlab.freedesktop.org/drm/intel/issues/7021 Cc: Mika Kahola <mika.kahola@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
- 11 Oct, 2022 5 commits
-
-
Anusha Srivatsa authored
MTL and dgfx use the same DC5 counter. While at it, this patch also adds the corresponding debugfs entries. Some cleanup wrt dc3co register which makes the code more readable. Driver loads all firmware that it finds in the firmware binary but platform doesn't *need* all of them. Cleaning the previous debugs entries to reflect which firmware is needed and if the needed firmware is loaded or not. MTL needs both Pipe A and Pipe B DMC to be loaded along with Main DMC. BSpec: 49788 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
Andrzej Hajda authored
There is special helper for register read/modify/write. Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
Andrzej Hajda authored
Two small changes in intel_uncore_rmw will allow to use it more broadly: - write register unconditionally, for use with latch registers, - return old value of the register, IRQ cleanup and similar. If we really want to keep write-only-if-changed feature maybe other helper will be more suitable for it, intel_uncore_rmw name suggests unconditional write. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Andrzej Hajda authored
Alias is shorter and more readable. Signed-off-by:
-
Andrzej Hajda authored
drm_device pointers are unwelcome. Signed-off-by:
-
- 10 Oct, 2022 2 commits
-
-
Ville Syrjälä authored
The watermark code for ctg/elk has been atomic ready for a long time so let's just flip the switch now that some of the last CxSR issues have been sorted out (which granted was a problem for vlv/chv as well despite them already having atomic enabled by default). v2: Rebase Signed-off-by:
-
Ville Syrjälä authored
Currently we do the DRIVER_ATOMIC disable as almost the first thing during pci probe. That involves the use of DISPLAY_VER() which is perhaps a bit sketchy now that we may need to read that out from the hardware itself. Looks like we do populate a default value for it anyway so the current does at least still work. But let's make this safer anyway and move the code into intel_device_info_runtime_init() where we also handle the same thing for the !HAS_DISPLAY case. Signed-off-by:
-
- 07 Oct, 2022 4 commits
-
-
Ville Syrjälä authored
We've excluded gmch platforms from writing the final watermarks for any disabled pipe. IIRC the reason was perhaps some lingering issue with the watermark merging across the pipes. But I can't really see any reason for this anymore, so let's unify this behaviour. The main benefit being more consistency in register dumps when we don't have stale watermarks hanging around in the registers. Functionally there should be no difference as the hardware just ignore all of it when the pipe is disabled. Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
Like most other plane control register bits, the pipe gamma enable bit is also blocked by CxSR. So make sure we kick the machine out of CxSR before trying to change that bit. Signed-off-by:
-
Ville Syrjälä authored
On g4x/vlv/chv the hardware seems incapable of changing the pixel format, rotation, or YUV->RGB CSC matrix while in CxSR. Additionally on VLV/CHV the sprites seem incapable of tiling changes while in CxSR. On g4x CxSR is not even possible with the sprite enabled. Curiously the primary plane seems perfectly happy when changing tiling during CxSR. Pimp up the code to account for these when determining whether CxSR needs to be disabled. Since it looks like most of the plane control register bits are affected let's just compare that. But in the name of efficiency we'll make an exception for the primary plane tiling changes (avoids some extra vblank waits). v2: Just use the pre-computed plane control register values Signed-off-by:
-
Ville Syrjälä authored
Rename a few functions from intel_crtc_foo_init() to intel_foo_crtc_init() so that the namespaec clearly indicates what feature/file we're talking about. I left out intel_crtc_crc_init() because the whole crc stuff uses intel_crtc_ as its namespace currently. Suggested-by:
-
- 06 Oct, 2022 1 commit
-
-
Radhakrishna Sripada authored
Meteorlake PCH reuses Alderlake vbt, DE pin mapping. Extend ADL-P pin mapping for Meteorlake. Bspec: 20124 does not have the mapping for MTP. Based on Bspec:49306, 64051, it is concluded that MTP and ADL-P PCH have the same vbt -> DE pin pair mapping. Reviewed-by:
-
- 04 Oct, 2022 3 commits
-
-
José Roberto de Souza authored
Meteorlake and display 14 platform don't have any PSR differences when comparing to Alderlake-P display, so it was only necessary to extend some checks to properly program hardware. BSpec: 55229, 49196 Cc: Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Now that we track the VBT drrs type per-panel we can move the has_drrs_modes() check to the panel init rather than doing it for every intel_panel_drrs_type() call. Signed-off-by:
-
Ville Syrjälä authored
Only report DRRS capability for the connector if its fixed_modes list contains at least two modes capable of seamless DRRS switch between them. Signed-off-by:
-
- 03 Oct, 2022 12 commits
-
-
Ville Syrjälä authored
Grab the crtc mutex so that looking at the crtc state is actually safe. Reviewed-by:
-
Ville Syrjälä authored
Since I already broke anything that relied on the old contents of the DRRS debugfs files might as well finish the breakage and convert the files to be per-crtc/connector so we don't need to have annoying code in igt to parse these. Reviewed-by:
-
Ville Syrjälä authored
The stuff in the DRRS debugs is currently a hodgepode mix of camelcase, lowercase, spaces, undescores, you name it. Convert over to a reasonably common style. Also move the busy bits thing to be the last sine it's generally the least interesting thing in there. Reviewed-by:
-
Ville Syrjälä authored
Move the DRRS debugfs stuff next to the actual implementation so that it's easier to deal with the whole. Reviewed-by:
-
Ville Syrjälä authored
Make sure modes with crazy big dotclocks are rejected early, so as to not cause problems for subsequent code via integer overflows and whatnot. These would eventually be rejected in intel_crtc_compute_pipe_mode() but that is now too late as we do the clock computations a bit earlier than that. And we don't want to just reorder the two since we still want to check the final computed dotclock against the hardware limit to make sure we didn't end up above the limit due to rounding/etc. Fixes: 0ff0e219 ("drm/i915: Compute clocks earlier") Signed-off-by:
-
Ville Syrjälä authored
Replace the huge modifier lists in the watermark code with a few calls to intel_fb.c. Reviewed-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
Take the DG2 CCS+CC modifier into account when calculating the watermarks. Othwerwise we'll calculate the watermarks thinking this tile-4 modifier is linear. The rc_surface part is actually a nop since that is not used for any glk+ platform. Cc: stable@vger.kernel.org Fixes: 680025dc ("drm/i915/dg2: Add support for DG2 clear color compression") Reviewed-by:
-
Ville Syrjälä authored
Take the DG2 CCS modifiers into account when calculating the watermarks. Othwerwise we'll calculate the watermarks thinking these tile-4 modifiers are linear. The rc_surface part is actually a nop since that is not used for any glk+ platform. Cc: stable@vger.kernel.org Fixes: 4c3afa72 ("drm/i915/dg2: Add support for DG2 render and media compression") Reviewed-by:
-
Ville Syrjälä authored
Take the gen12+ CCS+CC modifier into account when calculating the watermarks. Othwerwise we'll calculate the watermarks thinking this Y-tiled modifier is linear. The rc_surface part is actually a nop since that is not used for any glk+ platform. Cc: stable@vger.kernel.org Fixes: d1e2775e ("drm/i915/tgl: Add Clear Color support for TGL Render Decompression") Reviewed-by:
-
Ville Syrjälä authored
Take the gen12+ MC CCS modifier into account when calculating the watermarks. Othwerwise we'll calculate the watermarks thinking this Y-tiled modifier is linear. The rc_surface part is actually a nop since that is not used for any glk+ platform. v2: Split RC CCS vs. MC CCS to separate patches Cc: stable@vger.kernel.org Fixes: 2dfbf9d2 ("drm/i915/tgl: Gen-12 display can decompress surfaces compressed by the media engine") Reviewed-by:
-
Ville Syrjälä authored
Take the gen12+ RC CCS modifier into account when calculating the watermarks. Othwerwise we'll calculate the watermarks thinking this Y-tiled modifier is linear. The rc_surface part is actually a nop since that is not used for any glk+ platform. v2: Split RC CCS vs. MC CCS to separate patches Cc: stable@vger.kernel.org Fixes: b3e57bcc ("drm/i915/tgl: Gen-12 render decompression") Reviewed-by:
-
Jouni Högander authored
Current PSR code is supposed to use TRANSCODER_EDP to force 0 shift for bits in PSR_IMR/IIR registers: /* * gen12+ has registers relative to transcoder and one per transcoder * using the same bit definition: handle it as TRANSCODER_EDP to force * 0 shift in bit definition */ At the time of writing the code assumption "TRANSCODER_EDP == 0" was made. This is not the case and all fields in PSR_IMR and PSR_IIR are shifted incorrectly if DISPLAY_VER >= 12. Fix this by adding separate register field defines for >=12 and add bit getter functions to keep code readability. v4: - Remove EDP from TGL definitions (José) - Use REG_BIT and REG_GENMASK (José) v3: - Add separate register field defines (José) - Add bit getter functions (José) v2: - Improve commit message (José) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Mika Kahola <mika.kahola@intel.com> Fixes: 8241cfbe ("drm/i915/tgl: Access the right register when handling PSR interruptions") Signed-off-by:
-
- 30 Sep, 2022 5 commits
-
-
Ville Syrjälä authored
Print out on which pipes, and for what reason, we are forcing a full modeset. Signed-off-by:
-
Ville Syrjälä authored
Make glk_load_degamma_lut() more like most everyone else and pass in the LUT explicitly. Signed-off-by:
-
Ville Syrjälä authored
Remove a bunch of pointless curly brackets and do the s/dev_priv/i915/ while at it. Signed-off-by:
-
Ville Syrjälä authored
Get rid of the funny hsw vs. ivb extra indentation level in intel_color_init_hooks(). Signed-off-by:
-
Ville Syrjälä authored
intel_color_init() does both device level and crtc level stuff. Split it up accordingly. Signed-off-by:
-
