- 19 Oct, 2004 40 commits
-
-
Suresh B. Siddha authored
Sync x86_64 noexec behaviour with i386. And remove all the confusing noexec related boot parameters. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Petr Vandrovec authored
For several months I'm receiving complaints from matroxfb users that v4lctl suddenly stops working for them on kernel upgrade. Problem is that VIDIOC_S_CTRL was renumbered, but all distros still use old VIDIOC_S_CTRL value (f.e. even xawtv-3.94 in Debian unstable still uses old VIDIOC_S_CTRL definition). So let's add this old VIDIOC_S_CTRL value (now named VIDIOC_S_CTRL_OLD) to matroxfb's v4l handling. Signed-off-by:
Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by:
-
Antonino Daplas authored
Trivial fb_get_options fix for - cyber200fb - bw2fb Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Geert Uytterhoeven authored
fm2fb: Trivial fix for the breakage introduced by the addition of fb_get_options(). Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch cleans up some old cruft in the manipulation of the LVDS interface registers and fixes the blanking code to work with various DVI flat panels. Since this is all very sensitive stuff, I'm posting the patch here for testing before submitting it upstream, though Andrew is welcome to put it in -mm. It also fix some problems with getting the right PLL setup on recent Mac laptops, replacing the old hard coded list of values with cleaner code that "probes" the PLL setup done by the firmware. Signed-off-by:
-
Petr Vandrovec authored
This small change does: (1) Properly document 'outputs' option. (2) Properly use accelerated characters drawing. fbcon used depth == 0 for character painting long ago, but it is fixed for several months. (3) Provide correct hints for fbcon about matroxfb/matroxfb_crtc2 hardware capabilities. Signed-off-by: -
Petr Vandrovec authored
One of the PowerPC developers, Kostas Georgiou, pointed out to me discussion back from 2001 that they would prefer little endian mode as majority of users runs XF4.x and not Xpmac. And apparently nobody runs Xpmac now, so we can safely remove big-endian mode from matroxfb completely. So let's simplify matroxfb a bit: Accelerator and ILOAD fifo is now always in little endian mode. This is what XFree does. Due to this change all #ifdefs based on endianness was removed from driver - except one which selects framebuffer endinaness (but there is no code in matroxfb which writes to framebuffer directly). It seems that while I was not looking m68k got ioremap, and all architectures now offer ioremap and ioremap_nocache. Let's kill code which mapped ioremap_nocache to ioremap, and ioremap to bus_to_virt for architectures which did not provide them. And this also fixes small typo - M_C2CTL should be 0x3C10 and not 0x3E10. Apparently Matrox notes about need to program this register during initialization are not so important... Signed-off-by:
-
Antonino Daplas authored
From: Gerd Knorr <kraxel@bytesex.org>: "IMHO the the only sane thing is to have two options for total + remapped memory as well. Otherwise we'll end up changing that back and forth like it happened for the size calculation stuff for quite some time ... The patch below does just that and also has the other vmode fix (vmode = yres * linelength /* instead of yres * xres * depth >> 3 */)." Signed-off-by:
-
Antonino Daplas authored
- use vesafb_fix.line_length * vesafb_defined.yres to calculate the minimum memory required for a video mode. From Aurelien Jacobs <aurel@gnuage.org>. - separately calculate the memory required for a video mode, memory to be remapped, and total memory (for MTRR). From Gerd Knorr <kraxel@bytesex.org>. - the 'vram' option is for memory to be remapped, not total memory. Signed-off-by:
-
Venkatesh Pallipadi authored
EDID_INFO is encroaching on the space meant for E820 map in zero-page. This will result in E820 map corruption on any system that has more=20 than 18 E820 entries and CONFIG_VIDEO_SELECT. Not sure how this bug=20 managed to hide for more than a year. Attached patch should fix the bug. Signed-off-by:
-
Antonino Daplas authored
fbcon doesn't set a unimap at boot time, so special characters come out wrongly. This is the code sequence in take_over_console(). newcon->startup() oldcon->deinit() newcon->init() The previous console driver (ie, vgacon), via its deinit method, may release the unimap allocated by fbcon in fbcon_startup. This is the reason why calling con_set_default_unimap() in fbcon_init() works, but not in fbcon_startup(). Check if the default display has an allocated unimap, and if it has none, call con_set_default_unimap(). And if the target display has no allocated unimap, then call con_copy_unimap(), where the source unimap is from the default display. Signed-off-by:
-
Takashi Iwai authored
From: Egbert Eich <eich@suse.de> I would like to utilize kernel ioctls to save/restore console fonts in VGA text mode when running X. So far the Xserver takes care of this however there more and more problems with this: 1. On some platforms (IA64) we need to POST the BIOS before we even have a chance to access the hardware ourselves. This POSTing will usually undo any changes to the graphics hardware that the kernel may have done. 2. More and more drivers fully rely on BIOS support however the BIOS functions which could be used to save/restore register settings may be broken so the only way of mode save/restore is getting/setting the BIOS mode ID. I've hacked up some code for X however I ran into two problems: 1. con_font_get() in linux/drivers/char/vt.c seems to be broken as the font parameters (height, width, charcount) are never reported back. Therefore this function seems to be pretty useless. The fix is simple (please see below). 2. fb consoles seem to allow to install fonts per vt so that the user can have a different font on every console. The text console driver doesn't support this: the font is downloaded to the video card and will be used for all systems. Still the vga_con driver stores the font parameters per console with the effect that setting a font with different parameters on one console will result in the wron values when this font information is read back from another console. Appearantly this broken feature has been introduced in 2.6 as in the 2.4 kernel the vga_con font information is stored in one single global variable. The IA64 platform at least still heavily relies on the VGA text console. To be able to fix some VT switching issues with X on this platform I need these two issues resolved. Signed-off-by: -
Antonino Daplas authored
Add iomem annotations to vga16fb.c Signed-off-by:
-
Antonino Daplas authored
Add iomem annotations to i810fb. Signed-off-by:
-
Antonino Daplas authored
Add iomem annotations to fbmem.c Signed-off-by:
-
Andreas Henriksson authored
When Antonino A. Daplas posted his "fbdev: Initialize i810fb after agpgart" patch he said that the ugly agp initialization hack for intel agp shouldn't be needed but that he couldn't test it. I have tested the framebuffer updates and additionally removed the initialization hack and it does indeed work. Signed-off-by:
Andreas Henriksson <andreas@fjortis.info> Signed-off-by:
-
Benjamin Herrenschmidt authored
Fix a small logic error in the monitor probe code when nothing was found. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Antonino Daplas authored
This patches fixes the following: - scrolling corruption if scrolling mode is SCROLL_PAN_MOVE. This bug was introduced by the tile blitting patch. - flashing cursor even when console is blanked Signed-off-by:
-
Antonino Daplas authored
Hopefully, this patch fixes one last major regression for one particular driver, namely matroxfb. This drier has 2 versions, one for the kernel and another as a '2.4 backport' patch. This patch adds a tileblitting extension to fbcon. This extension, in summary, is basically a forward-port of the 2.4 fbdev/fbcon framework to 2.6 but without the fbcon dependency. Tile blitting is similar to bitblit, except that the basic unit is a tile (a bitmap of x-by-y dimensions). The display, instead of being described in terms of pixels and scanlines, are described as a region further subdivided into rectangular sections. In fbcon parlance, a tile is a character. Besides a possible fix for matroxfb, tileblitting can be advantageous for hardware that supports some kind of fontcaching mechanism. Also, in the unlikely chance that the console begins supporting multicolored fonts, tileblitting is probably more optimal than bitblitting because bitblitting will need to push more data through the bus. To enable support for this extension, a driver needs to: - enable CONFIG_FB_TILEBLITTING - set FBINFO_MISC_TILEBLITTING in info->flags - set the required function pointers in struct fb_tileops. The required operations are: - void (*fb_settile)(struct fb_info *info, struct fb_tilemap *map); tells driver about the tile characteristics (dimensions, bitdepth) and about the tilemap which is an array of bitmaps: display->fontdata - void (*fb_tilecopy)(struct fb_info *info, struct fb_tilearea *area); move a rectangular section of tiles (bmove) - void (*fb_tilefill)(struct fb_info *info, struct fb_tilerect *rect); fill a rectangular section with a tile (clear) - void (*fb_tileblit)(struct fb_info *info, struct fb_tileblit *blit); copy an array of tiles to a rectangular section (putcs) - void (*fb_tilecursor)(struct fb_info *info, struct fb_tilecursor *cursor); cursor function Changes: Addition of this extension necessitates cleanup of fbcon.c. The basic drawing functions in fbcon are bmove, clear, putcs and cursor (the fbcon_* set). The fbcon_* set are just wrappers to accel_* set. However, usage is not consistent, some functions call the fbcon_* set, others call the accel_* set. With this patch, a new fbcon-specific structure (struct fbcon_ops) is created. Depending on the setting of the hardware, this struct contains pointers to either the tileblitting set or the bitblitting set (formerly the accel_* set). The tileblitting set is new in this patch. The vast majority of functions in fbcon will need to only call the fbcon_* set. In turn, it calls functions in struct fbcon_ops. Knowledge of the blitting type is not required. The accel_* set is renamed to bit_* and is moved into a separate file, bitblit.c. The tile blitting set is in tileblit.c. In my case at least, the cleanup did produce an unexpected but beneficial side effect, a little more speedup. Not much, < 5%. Petr, if you have comments, suggestions, or you think this is a bad idea, let me know. Signed-off-by: -
Antonino Daplas authored
Swsusp turns off the display when a power-management-enabled framebuffer driver is used. According to Nigel Cunningham <ncunningham@linuxmail.org>, the fix may involve the following: "...I thought the best approach would be to use device classes to find the struct dev for the frame buffer driver, and then use the same code I use for storage devices to avoid suspending the frame buffer until later..." Changes: - pass info->device to class_simple_device_add() - add struct device *device to struct fb_info - store struct device in framebuffer_alloc() - for drivers not using framebuffer_alloc(), store the struct during initalization - port i810fb and rivafb to use framebuffer_alloc() Signed-off-by:
-
Antonino Daplas authored
This patch fixes the 'fbcon=map:<option>" of fbcon. (This option has been present since 2.4, but got broken in 2.6). This particular option tells fbcon what framebuffer device gets mapped to what console. Syntax is: fbcon=map:abcd... where a, b, c, d,... are framebuffer numbers as it would appear in /proc/fb. Given only 2 valid fbdevs, 0 and 1, if fbcon=map:0110, then: tty1 = fb0 tty2 = fb1 tty3 = fb1 tty4 = fb0 (sequence repeats for the rest of the consoles) If an invalid framebuffer is used, then the console will be mapped to the first user-chosen framebuffer. Ie: fbcon=map:102 tty1 = fb1 tty2 = fb0 tty3 = fb1 <
-
Antonino Daplas authored
This fixes the logo failing to draw in vga16fb due to faulty boolean logic. Signed-off-by:
-
Antonino Daplas authored
- This patch removes the unnecessary call to banshee_wait_idle() from tdfxfb_copyarea, imageblit and fillrect. Removal of the sync will garner an additional ~20% in scrolling speed. - Removes "inverse" which generates a compile warning if modular. Signed-off-by:
-
Marcelo Tosatti authored
We can shrink the pagevec structure to cacheline align it. It is used all over VM reclaiming and mpage pagecache read code. Right now it is 140 bytes on 64-bit and 72 bytes on 32-bit. Thats just a little bit more than a power of 2 (which will cacheline align), so shrink it to be aligned: 64 bytes on 32bit and 124bytes on 64-bit. It now occupies two cachelines most of the time instead of three. I changed nr and cold to "unsigned short" because they'll never reach 2 ^ 16. Did some reaim benchmarking on 4way PIII (32byte cacheline), with 512MB RAM: #### stock 2.6.9-rc1-mm4 #### Peak load Test: Maximum Jobs per Minute 4144.44 (average of 3 runs) Quick Convergence Test: Maximum Jobs per Minute 4007.86 (average of 3 runs) Peak load Test: Maximum Jobs per Minute 4207.48 (average of 3 runs) Quick Convergence Test: Maximum Jobs per Minute 3999.28 (average of 3 runs) #### shrink-pagevec ##### Peak load Test: Maximum Jobs per Minute 4717.88 (average of 3 runs) Quick Convergence Test: Maximum Jobs per Minute 4360.59 (average of 3 runs) Peak load Test: Maximum Jobs per Minute 4493.18 (average of 3 runs) Quick Convergence Test: Maximum Jobs per Minute 4327.77 (average of 3 runs) Signed-off-by:
-
Christoph Hellwig authored
Currently we every filesystem with Posix ACLs has it's own reimplemtation of the generic permission checking code with additonal ACL support. This patch - adds an optional callback to vfs_permission that filesystems can use for ACL support (and renames it to generic_permission because the old name was wrong - it wasn't like the other vfs_* functions at all) - uses it in ext2, ext3 and jfs. XFS will follow a little later as it's permission checking is burried under several layers of abstraction. From: Dave Kleikamp <shaggy@austin.ibm.com> jfs doesn't currently set MS_POSIXACL (it doesn't require the acl mount option), so this test would fail here. The patch below will set it. Signed-off-by:
-
Christoph Hellwig authored
Not exactly something we want modules to mess around with. Signed-off-by:
-
Christoph Hellwig authored
no user in sight Signed-off-by:
-
Christoph Hellwig authored
Besides namei.c it's only used in the SN2 hwgraph code which can't be modular (and will be removed soon) Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Rather lowlevel functions that modules shouldn't mess with and fortunately currently don't. Signed-off-by:
-
Christoph Hellwig authored
Not exactly a thing we want done from modules, and no module uses it anyway. Signed-off-by:
-
Christoph Hellwig authored
These are basically shared code for native/32bit compat code, but as CONFIG_COMPAT is a bool there's no need to export them. Signed-off-by:
-
Christoph Hellwig authored
Only legit user is the partitioning code, in addition some uml code is still using despite the uml people beeing told to fix it at least two times. Signed-off-by:
-
Christoph Hellwig authored
Two dcache.c functions that shouldn't be used by filesystems directly (probably a leftover of the intermezzo mess). Signed-off-by:
-
Christoph Hellwig authored
Only used by kernel/sysctl.c which absolutely can't be modular Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
cutting back some unused legacy PM code Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Completely unused but exported function in fs/posix_acl.c Signed-off-by:
-
Christoph Hellwig authored
mb_cache_entry_takeout and mb_cache_entry_dup are totally unused. Signed-off-by:
-
