commit 19be0eaf upstream.

This is an ancient bug that was actually attempted to be fixed once
(badly) by me eleven years ago in commit 4ceb5db9 ("Fix
get_user_pages() race for write access") but that was then undone due to
problems on s390 by commit f33ea7f4 ("fix get_user_pages bug").

In the meantime, the s390 situation has long been fixed, and we can now
fix it by checking the pte_dirty() bit properly (and do it better).  The
s390 dirty bit was implemented in abf09bed ("s390/mm: implement
software dirty bits") which made it into v3.9.  Earlier kernels will
have to look at the page state itself.

Also, the VM has become more scalable, and what used a purely
theoretical race back then has become easier to trigger.

To fix it, we introduce a new internal FOLL_COW flag to mark the "yes,
we already did a COW" rather than play racy games with FOLL_WRITE that
is very fundamental, and then use the pte dirty flag to validate that
the FOLL_COW flag is still valid.
Reported-and-tested-by: Phil "not Paul" Oester <kernel@linuxace.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Michal Hocko <mhocko@suse.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6d92bc9d upstream.

The 32-bit x86 assembler in binutils 2.26 will generate R_386_GOT32X
relocation to get the symbol address in PIC.  When the compressed x86
kernel isn't built as PIC, the linker optimizes R_386_GOT32X relocations
to their fixed symbol addresses.  However, when the compressed x86
kernel is loaded at a different address, it leads to the following
load failure:

  Failed to allocate space for phdrs

during the decompression stage.

If the compressed x86 kernel is relocatable at run-time, it should be
compiled with -fPIE, instead of -fPIC, if possible and should be built as
Position Independent Executable (PIE) so that linker won't optimize
R_386_GOT32X relocation to its fixed symbol address.

Older linkers generate R_386_32 relocations against locally defined
symbols, _bss, _ebss, _got and _egot, in PIE.  It isn't wrong, just less
optimal than R_386_RELATIVE.  But the x86 kernel fails to properly handle
R_386_32 relocations when relocating the kernel.  To generate
R_386_RELATIVE relocations, we mark _bss, _ebss, _got and _egot as
hidden in both 32-bit and 64-bit x86 kernels.

To build a 64-bit compressed x86 kernel as PIE, we need to disable the
relocation overflow check to avoid relocation overflow errors. We do
this with a new linker command-line option, -z noreloc-overflow, which
got added recently:

 commit 4c10bbaa0912742322f10d9d5bb630ba4e15dfa7
 Author: H.J. Lu <hjl.tools@gmail.com>
 Date:   Tue Mar 15 11:07:06 2016 -0700

    Add -z noreloc-overflow option to x86-64 ld

    Add -z noreloc-overflow command-line option to the x86-64 ELF linker to
    disable relocation overflow check.  This can be used to avoid relocation
    overflow check if there will be no dynamic relocation overflow at
    run-time.

The 64-bit compressed x86 kernel is built as PIE only if the linker supports
-z noreloc-overflow.  So far 64-bit relocatable compressed x86 kernel
boots fine even when it is built as a normal executable.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
[ Edited the changelog and comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 72fd50e1 upstream.

The req_canceled() callback is used by tpm_transmit() periodically to
check whether the request has been canceled while it is receiving a
response from the TPM.

The TPM_CRB_CTRL_CANCEL register was cleared already in the crb_cancel
callback, which has two consequences:

* Cancel might not happen.
* req_canceled() always returns zero.

A better place to clear the register is when starting to send a new
command. The behavior of TPM_CRB_CTRL_CANCEL is described in the
section 5.5.3.6 of the PTP specification.

Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d4816edf upstream.

Unseal and load operations should be done as an atomic operation. This
commit introduces unlocked tpm_transmit() so that tpm2_unseal_trusted()
can do the locking by itself.

Fixes: 0fe54803 ("keys, trusted: seal/unseal with TPM 2.0 chips")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e71b9dff upstream.

Ima tries to call ->setxattr() on overlayfs dentry after having locked
underlying inode, which results in a deadlock.
Reported-by: Krisztian Litkey <kli@iki.fi>
Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit af48d7bc upstream.

We know that 'ret = 0' because it has been tested a few lines above.
So, if 'kzalloc' fails, 0 will be returned instead of an error code.
Return -ENOMEM instead.

Fixes: a0d46a3d ("ARM: cpuidle: Register per cpuidle device")
Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ca88696e upstream.

The Qualcomm PMIC GPIO and MPP lines are problematic: the
are fetched from the main MFD driver with platform_get_irq()
which means that at this point they will all be assigned the
flags set up for the interrupts in the device tree.

That is problematic since these are flagged as rising edge
and an this point the interrupt descriptor is assigned a
rising edge, while the only thing the GPIO/MPP drivers really
do is issue irq_get_irqchip_state() on the line to read it
out and to provide a .to_irq() helper for *other* IRQ
consumers.

If another device tree node tries to flag the same IRQ
for use as something else than rising edge, the kernel
irqdomain core will protest like this:

  type mismatch, failed to map hwirq-NN for <FOO>!

Which is what happens when the device tree defines two
contradictory flags for the same interrupt line.

To work around this and alleviate the problem, assign 0
as flag for the interrupts taken by the PM GPIO and MPP
drivers. This will lead to the flag being unset, and a
second consumer requesting rising, falling, both or level
interrupts will be respected. This is what the qcom-pm*.dtsi
files already do.

Switched to using the symbolic name IRQ_TYPE_NONE so that
we get this more readable.

Fixes: bce36046 ("ARM: dts: apq8064: add pm8921 mpp support")
Fixes: 874443fe ("ARM: dts: apq8064: Add pm8921 mfd and its gpio node")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Björn Andersson <bjorn.andersson@linaro.org>
Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 061492cf upstream.

The armada-390.dtsi was broken since the first patch which adds Device Tree
files for Armada 39x SoC was introduced.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fixes 538da83d ("ARM: mvebu: add Device Tree files for Armada 39x SoC and board")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

commit 72b4f6a5 upstream.

On x86_32, when an interrupt happens from kernel space, SS and SP aren't
pushed and the existing stack is used.  So pt_regs is effectively two
words shorter, and the previous stack pointer is normally the memory
after the shortened pt_regs, aka '&regs->sp'.

But in the rare case where the interrupt hits right after the stack
pointer has been changed to point to an empty stack, like for example
when call_on_stack() is used, the address immediately after the
shortened pt_regs is no longer on the stack.  In that case, instead of
'&regs->sp', the previous stack pointer should be retrieved from the
beginning of the current stack page.

kernel_stack_pointer() wants to do that, but it forgets to dereference
the pointer.  So instead of returning a pointer to the previous stack,
it returns a pointer to the beginning of the current stack.

Note that it's probably outside of kernel_stack_pointer()'s scope to be
switching stacks at all.  The x86_64 version of this function doesn't do
it, and it would be better for the caller to do it if necessary.  But
that's a patch for another day.  This just fixes the original intent.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0788aa6a ("x86: Prepare removal of previous_esp from i386 thread_info structure")
Link: http://lkml.kernel.org/r/472453d6e9f6a2d4ab16aaed4935f43117111566.1471535549.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit db91aa79 upstream.

When a CPU is about to be offlined we call fixup_irqs() that resets IRQ
affinities related to the CPU in question. The same thing is also done when
the system is suspended to S-states like S3 (mem).

For each IRQ we try to complete any on-going move regardless whether the
IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch
its chip_data, assume it is of type struct apic_chip_data and manipulate it
by clearing old_domain mask etc. For irq_chips that are not part of the
x86_vector_domain, like those created by various GPIO drivers, will find
their chip_data being changed unexpectly.

Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets
corrupted after resume:

  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  hi

  # rtcwake -s10 -mmem
  <10 seconds passes>

  # cat /sys/kernel/debug/gpio
  gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00:
   gpio-511 (                    |sysfs               ) in  ?

Note '?' in the output. It means the struct gpio_chip ->get function is
NULL whereas before suspend it was there.

Fix this by first checking that the IRQ belongs to x86_vector_domain before
we try to use the chip_data as struct apic_chip_data.
Reported-and-tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: http://lkml.kernel.org/r/20161003101708.34795-1-mika.westerberg@linux.intel.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 917db484 upstream.

In commit:

  ec776ef6 ("x86/mm: Add support for the non-standard protected e820 type")

Christoph references the original patch I wrote implementing pmem support.
The intent of the 'max_pfn' changes in that commit were to enable persistent
memory ranges to be covered by the struct page memmap by default.

However, that approach was abandoned when Christoph ported the patches [1], and
that functionality has since been replaced by devm_memremap_pages().

In the meantime, this max_pfn manipulation is confusing kdump [2] that
assumes that everything covered by the max_pfn is "System RAM".  This
results in kdump hanging or crashing.

 [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-March/000348.html
 [2]: https://bugzilla.redhat.com/show_bug.cgi?id=1351098

So fix it.
Reported-by: Zhang Yi <yizhan@redhat.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-nvdimm@lists.01.org
Fixes: ec776ef6 ("x86/mm: Add support for the non-standard protected e820 type")
Link: http://lkml.kernel.org/r/147448744538.34910.11287693517367139607.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ac0e89bb upstream.

We use logical negate where bitwise negate was intended.  It means that
we never return -EINVAL here.

Fixes: ce11e48b ('KVM: PPC: E500: Add userspace debug stub support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 91e4f1b6 upstream.

When a guest TLB entry is replaced by TLBWI or TLBWR, we only invalidate
TLB entries on the local CPU. This doesn't work correctly on an SMP host
when the guest is migrated to a different physical CPU, as it could pick
up stale TLB mappings from the last time the vCPU ran on that physical
CPU.

Therefore invalidate both user and kernel host ASIDs on other CPUs,
which will cause new ASIDs to be generated when it next runs on those
CPUs.

We're careful only to do this if the TLB entry was already valid, and
only for the kernel ASID where the virtual address it mapped is outside
of the guest user address range.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fa73c3b2 upstream.

The MMCR2 register is available twice, one time with number 785
(privileged access), and one time with number 769 (unprivileged,
but it can be disabled completely). In former times, the Linux
kernel was using the unprivileged register 769 only, but since
commit 8dd75ccb ("powerpc: Use privileged SPR number
for MMCR2"), it uses the privileged register 785 instead.
The KVM-PR code then of course also switched to use the SPR 785,
but this is causing older guest kernels to crash, since these
kernels still access 769 instead. So to support older kernels
with KVM-PR again, we have to support register 769 in KVM-PR, too.

Fixes: 8dd75ccbSigned-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 88003fb1 upstream.

This fixes a compile failure:

	drivers/built-in.o: In function `wm8350_i2c_probe':
	core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c'
	Makefile:953: recipe for target 'vmlinux' failed

Fixes: 52b461b8 ("mfd: Add regmap cache support for wm8350")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9a6dc644 upstream.

set_bit() and clear_bit() take the bit number so this code is really
doing "1 << (1 << irq)" which is a double shift bug.  It's done
consistently so it won't cause a problem unless "irq" is more than 4.

Fixes: 70c6cce0 ('mfd: Support 88pm80x in 80x driver')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2c2469bc upstream.

readl_poll_timeout() calls usleep_range(), but
regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap
spinlock held).

Replace the readl_poll_timeout() call by readl_poll_timeout_atomic().

Fixes: ea31c0cf ("mfd: atmel-hlcdc: Implement config synchronization")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8dcc5ff8 upstream.

Member "status" of struct usb_sg_request is managed by usb core. A
spin lock is used to serialize the change of it. The driver could
check the value of req->status, but should avoid changing it without
the hold of the spinlock. Otherwise, it could cause race or error
in usb core.

This patch could be backported to stable kernels with version later
than v3.14.

Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8da08ca0 upstream.

Currently, usb-line6 module exports an array of MIDI manufacturer ID and
usb-pod module uses it. However, the declaration is not the definition in
common header. The difference is explicit length of array. Although
compiler calculates it and everything goes well, it's better to use the
same representation between definition and declaration.

This commit fills the length of array for usb-line6 module. As a small
good sub-effect, this commit suppress below warnings from static analysis
by sparse v0.5.0.

sound/usb/line6/driver.c:274:43: error: cannot size expression
sound/usb/line6/driver.c:275:16: error: cannot size expression
sound/usb/line6/driver.c:276:16: error: cannot size expression
sound/usb/line6/driver.c:277:16: error: cannot size expression

Fixes: 705ececd ("Staging: add line6 usb driver")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit eb1a74b7 upstream.

The DragonFly quirk added in 42e3121d ("ALSA: usb-audio: Add a more
accurate volume quirk for AudioQuest DragonFly") applies a custom dB map
on the volume control when its range is reported as 0..50 (0 .. 0.2dB).

However, there exists at least one other variant (hw v1.0c, as opposed
to the tested v1.2) which reports a different non-sensical volume range
(0..53) and the custom map is therefore not applied for that device.

This results in all of the volume change appearing close to 100% on
mixer UIs that utilize the dB TLV information.

Add a fallback case where no dB TLV is reported at all if the control
range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also
restrict the quirk to only apply to the volume control as there is also
a mute control which would match the check otherwise.

Fixes: 42e3121d ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly")
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Reported-by: David W <regulars@d-dub.org.uk>
Tested-by: David W <regulars@d-dub.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit db685779 upstream.

The pointer callbacks of ali5451 driver may return the value at the
boundary occasionally, and it results in the kernel warning like
  snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024

It seems that folding the position offset is enough for fixing the
warning and no ill-effect has been seen by that.
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 58bfea95 upstream.

In commit 27727df2 ("Avoid taking lock in NMI path with
CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code
the timekeeping_get_ns() function, but I forgot to include
the unit conversion from cycles to nanoseconds, breaking the
function's output, which impacts users like perf.

This results in bogus perf timestamps like:
 swapper     0 [000]   253.427536:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426573:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426687:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426800:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.426905:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427022:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427127:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427239:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427346:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   254.427463:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]   255.426572:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Instead of more reasonable expected timestamps like:
 swapper     0 [000]    39.953768:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.064839:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.175956:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.287103:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.398217:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.509324:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.620437:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.731546:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.842654:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    40.953772:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])
 swapper     0 [000]    41.064881:  111111111 cpu-clock:  ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms])

Add the proper use of timekeeping_delta_to_ns() to convert
the cycle delta to nanoseconds as needed.

Thanks to Brendan and Alexei for finding this quickly after
the v4.8 release. Unfortunately the problematic commit has
landed in some -stable trees so they'll need this fix as
well.

Many apologies for this mistake. I'll be looking to add a
perf-clock sanity test to the kselftest timers tests soon.

Fixes: 27727df2 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"
Reported-by: Brendan Gregg <bgregg@netflix.com>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Tested-and-reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@linaro.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6bd58f09 upstream.

The timekeeping code does not currently provide a way to translate
externally provided clocksource cycles to system time. The cycle count
is always provided by the result clocksource read() method internal to
the timekeeping code. The added function timekeeping_cycles_to_ns()
calculated a nanosecond value from a cycle count that can be added to
tk_read_base.base value yielding the current system time. This allows
clocksource cycle values external to the timekeeping code to provide a
cycle count that can be transformed to system time.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0eec8809 upstream.

HP Spectre x360 with CX20724 codec has two speaker outputs while the
BIOS sets up only the bottom one (NID 0x17) and disables the top one
(NID 0x1d).

This patch adds a fixup simply defining the proper pincfg for NID 0x1d
so that the top speaker works as is.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=169071Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3f640970 upstream.

One of the laptops has the codec ALC256 on it, applying the
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem, the rest
of laptops have the codec ALC295 on them, they are similar to machines
with ALC225, applying the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE can fix
the problem.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a59b679a upstream.

ACPICA commit 7bb77313091e52a846df4c9c2bea90be31bfb9d8

Eliminate warnings for "not found" _Sx errors, since these
are optional. Original NOT_FOUND status is still returned.

Original changes by Prarit Bhargava.
ACPICA BZ 1208.

Link: https://github.com/acpica/acpica/commit/7bb77313
Link: https://bugs.acpica.org/show_bug.cgi?id=1208Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "Charles (Chas) Williams" <ciwillia@brocade.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 392c9da2 upstream.

We have two new Dell laptop models, they have the same ALC255 pin
definition, but not in the pin quirk table yet, as a result, the
headset microphone can't work. After adding the definition in the
table, the headset microphone works well.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ab21b63e upstream.

This reverts commit e6c7efdc.

Turns out it was totally wrong.  The memory is supposed to be bound to
the kref, as the original code was doing correctly, not the
device/driver binding as the devm_kzalloc() would cause.

This fixes an oops when read would be called after the device was
unbound from the driver.
Reported-by: Ladislav Michl <ladis@linux-mips.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit decc5360 upstream.
Signed-off-by: Kyle Jones <kyle@kf5jwc.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fc1e2c8e upstream.

Commit 367e8560 introduced a bug
in fbtft-core where fps is always 0, this is because variable
update_time is not assigned correctly.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Fixes: 367e8560 ("Staging: fbtbt: Replace timespec with ktime_t")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2fae9e5a upstream.

This patch fixes a NULL pointer dereference caused by a race codition in
the probe function of the legousbtower driver. It re-structures the
probe function to only register the interface after successfully reading
the board's firmware ID.

The probe function does not deregister the usb interface after an error
receiving the devices firmware ID. The device file registered
(/dev/usb/legousbtower%d) may be read/written globally before the probe
function returns. When tower_delete is called in the probe function
(after an r/w has been initiated), core dev structures are deleted while
the file operation functions are still running. If the 0 address is
mappable on the machine, this vulnerability can be used to create a
Local Priviege Escalation exploit via a write-what-where condition by
remapping dev->interrupt_out_buffer in tower_write. A forged USB device
and local program execution would be required for LPE. The USB device
would have to delay the control message in tower_probe and accept
the control urb in tower_open whilst guest code initiated a write to the
device file as tower_delete is called from the error in tower_probe.

This bug has existed since 2003. Patch tested by emulated device.
Reported-by: James Patrick-Evans <james@jmp-e.com>
Tested-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: James Patrick-Evans <james@jmp-e.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a377f9e9 upstream.

A bug in the CRTSCTS handling caused RTS to alternate between

CRTSCTS=0 => "RTS is transmit active signal" and
CRTSCTS=1 => "RTS is used for receive flow control"

instead of

CRTSCTS=0 => "RTS is statically active" and
CRTSCTS=1 => "RTS is used for receive flow control"

This only happened after first having enabled CRTSCTS.
Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Fixes: 39a66b8d ("[PATCH] USB: CP2101 Add support for flow control")
[johan: reword commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
[johan: backport to 4.4 ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7efb3673 upstream.

bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector
entries.  However, the incoming bio may have more vector entries if it
was allocated by other means.  For example, bcache submits bios with
more than BIO_MAX_PAGES entries.  This results in bio_alloc() failure.

To avoid the failure, change the code so that it allocates bio with at
most BIO_MAX_PAGES entries.  If the incoming bio has more entries,
bio_add_page() will fail and a new bio will be allocated - the code that
handles bio_add_page() failure already exists in the dm-log-writes
target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0f4c7a13 upstream.

In the initial fix for non-zero divider shift value, the parenthesis
was missing after the negate operation. This patch adds the required
parenthesis. Otherwise, lower bits may be cleared unintentionally.
Signed-off-by: Loc Ho <lho@apm.com>
Acked-by: Toan Le <toanle@apm.com>
Fixes: 1382ea63 ("clk: xgene: Fix divider with non-zero shift value")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 22f6b4d3 upstream.

This ensures that do_mmap() won't implicitly make AIO memory mappings
executable if the READ_IMPLIES_EXEC personality flag is set.  Such
behavior is problematic because the security_mmap_file LSM hook doesn't
catch this case, potentially permitting an attacker to bypass a W^X
policy enforced by SELinux.

I have tested the patch on my machine.

To test the behavior, compile and run this:

    #define _GNU_SOURCE
    #include <unistd.h>
    #include <sys/personality.h>
    #include <linux/aio_abi.h>
    #include <err.h>
    #include <stdlib.h>
    #include <stdio.h>
    #include <sys/syscall.h>

    int main(void) {
        personality(READ_IMPLIES_EXEC);
        aio_context_t ctx = 0;
        if (syscall(__NR_io_setup, 1, &ctx))
            err(1, "io_setup");

        char cmd[1000];
        sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'",
            (int)getpid());
        system(cmd);
        return 0;
    }

In the output, "rw-s" is good, "rwxs" is bad.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d9f17987 upstream.
Reported-by: Lars Bußmann <ffsoest@kill-you.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
[sven@narfation.org: rewritten commit message to make clear that it is an
 bugfix to an user reported crash]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8ec07bf8 upstream.

When sending QP1 MAD packets which use a GRH, the source GID
(which consists of the 64-bit subnet prefix, and the 64 bit port GUID)
must be included in the packet GRH.

For SR-IOV, a GID cache is used, since the source GID needs to be the
slave's source GID, and not the Hypervisor's GID. This cache also
included a subnet_prefix. Unfortunately, the subnet_prefix field in
the cache was never initialized (to the default subnet prefix 0xfe80::0).
As a result, this field remained all zeroes.  Therefore, when SR-IOV
was active, all QP1 packets which included a GRH had a source GID
subnet prefix of all-zeroes.

However, the subnet-prefix should initially be 0xfe80::0 (the default
subnet prefix). In addition, if OpenSM modifies a port's subnet prefix,
the new subnet prefix must be used in the GRH when sending QP1 packets.
To fix this we now initialize the subnet prefix in the SR-IOV GID cache
to the default subnet prefix. We update the cached value if/when OpenSM
modifies the port's subnet prefix. We take this cached value when sending
QP1 packets when SR-IOV is active.

Note that the value is stored as an atomic64. This eliminates any need
for locking when the subnet prefix is being updated.

Note also that we depend on the FW generating the "port management change"
event for tracking subnet-prefix changes performed by OpenSM. If running
early FW (before 2.9.4630), subnet prefix changes will not be tracked (but
the default subnet prefix still will be stored in the cache; therefore
users who do not modify the subnet prefix will not have a problem).
IF there is a need for such tracking also for early FW, we will add that
capability in a subsequent patch.

Fixes: 1ffeb2eb ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>