Skip to content

L
linux
Switch branch/tag
  1. 04 Feb, 2009 14 commits
    • Chris Mason's avatar
      Btrfs: change btrfs_del_leaf to drop locks earlier · 4d081c41
      Chris Mason authored 
      btrfs_del_leaf does two things.  First it removes the pointer in the
parent, and then it frees the block that has the leaf.  It has the
parent node locked for both operations.

But, it only needs the parent locked while it is deleting the pointer.
After that it can safely free the block without the parent locked.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      4d081c41
    • Chris Mason's avatar
      Btrfs: Change btrfs_truncate_inode_items to stop when it hits the inode · 06d9a8d7
      Chris Mason authored 
      btrfs_truncate_inode_items is setup to stop doing btree searches when
it has finished removing the items for the inode.  It used to detect the
end of the inode by looking for an objectid that didn't match the
one we were searching for.

But, this would result in an extra search through the btree, which
adds extra balancing and cow costs to the operation.

This commit adds a check to see if we found the inode item, which means
we can stop searching early.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      06d9a8d7
    • Chris Mason's avatar
      Btrfs: Don't try to compress pages past i_size · f03d9301
      Chris Mason authored 
      The compression code had some checks to make sure we were only
compressing bytes inside of i_size, but it wasn't catching every
case.  To make things worse, some incorrect math about the number
of bytes remaining would make it try to compress more pages than the
file really had.

The fix used here is to fall back to the non-compression code in this
case, which does all the proper cleanup of delalloc and other accounting.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      f03d9301
    • Josef Bacik's avatar
      Btrfs: join the transaction in __btrfs_setxattr · 81144949
      Josef Bacik authored 
      With selinux on we end up calling __btrfs_setxattr when we create an inode,
which calls btrfs_start_transaction().  The problem is we've already called
that in btrfs_new_inode, and in btrfs_start_transaction we end up doing a
wait_current_trans().  If btrfs-transaction has started committing it will wait
for all handles to finish, while the other process is waiting for the
transaction to commit.  This is fixed by using btrfs_join_transaction, which
won't wait for the transaction to commit.  Thanks,
Signed-off-by: default avatarJosef Bacik <jbacik@redhat.com>
      81144949
    • Chris Ball's avatar
      Btrfs: Handle SGID bit when creating inodes · 8c087b51
      Chris Ball authored 
      Before this patch, new files/dirs would ignore the SGID bit on their
parent directory and always be owned by the creating user's uid/gid.
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      8c087b51
    • Chris Mason's avatar
      Btrfs: Make btrfs_drop_snapshot work in larger and more efficient chunks · bd56b302
      Chris Mason authored 
      Every transaction in btrfs creates a new snapshot, and then schedules the
snapshot from the last transaction for deletion.  Snapshot deletion
works by walking down the btree and dropping the reference counts
on each btree block during the walk.

If if a given leaf or node has a reference count greater than one,
the reference count is decremented and the subtree pointed to by that
node is ignored.

If the reference count is one, walking continues down into that node
or leaf, and the references of everything it points to are decremented.

The old code would try to work in small pieces, walking down the tree
until it found the lowest leaf or node to free and then returning.  This
was very friendly to the rest of the FS because it didn't have a huge
impact on other operations.

But it wouldn't always keep up with the rate that new commits added new
snapshots for deletion, and it wasn't very optimal for the extent
allocation tree because it wasn't finding leaves that were close together
on disk and processing them at the same time.

This changes things to walk down to a level 1 node and then process it
in bulk.  All the leaf pointers are sorted and the leaves are dropped
in order based on their extent number.

The extent allocation tree and commit code are now fast enough for
this kind of bulk processing to work without slowing the rest of the FS
down.  Overall it does less IO and is better able to keep up with
snapshot deletions under high load.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      bd56b302
    • Chris Mason's avatar
      Btrfs: Change btree locking to use explicit blocking points · b4ce94de
      Chris Mason authored 
      Most of the btrfs metadata operations can be protected by a spinlock,
but some operations still need to schedule.

So far, btrfs has been using a mutex along with a trylock loop,
most of the time it is able to avoid going for the full mutex, so
the trylock loop is a big performance gain.

This commit is step one for getting rid of the blocking locks entirely.
btrfs_tree_lock takes a spinlock, and the code explicitly switches
to a blocking lock when it starts an operation that can schedule.

We'll be able get rid of the blocking locks in smaller pieces over time.
Tracing allows us to find the most common cause of blocking, so we
can start with the hot spots first.

The basic idea is:

btrfs_tree_lock() returns with the spin lock held

btrfs_set_lock_blocking() sets the EXTENT_BUFFER_BLOCKING bit in
the extent buffer flags, and then drops the spin lock.  The buffer is
still considered locked by all of the btrfs code.

If btrfs_tree_lock gets the spinlock but finds the blocking bit set, it drops
the spin lock and waits on a wait queue for the blocking bit to go away.

Much of the code that needs to set the blocking bit finishes without actually
blocking a good percentage of the time.  So, an adaptive spin is still
used against the blocking bit to avoid very high context switch rates.

btrfs_clear_lock_blocking() clears the blocking bit and returns
with the spinlock held again.

btrfs_tree_unlock() can be called on either blocking or spinning locks,
it does the right thing based on the blocking bit.

ctree.c has a helper function to set/clear all the locked buffers in a
path as blocking.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      b4ce94de
    • Chris Mason's avatar
      Btrfs: hash_lock is no longer needed · c487685d
      Chris Mason authored 
      Before metadata is written to disk, it is updated to reflect that writeout
has begun.  Once this update is done, the block must be cow'd before it
can be modified again.

This update was originally synchronized by using a per-fs spinlock.  Today
the buffers for the metadata blocks are locked before writeout begins,
and everyone that tests the flag has the buffer locked as well.

So, the per-fs spinlock (called hash_lock for no good reason) is no
longer required.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      c487685d
    • Chris Mason's avatar
      Btrfs: disable leak debugging checks in extent_io.c · 3935127c
      Chris Mason authored 
      extent_io.c has debugging code to report and free leaked extent_state
and extent_buffer objects at rmmod time.  This helps track down
leaks and it saves you from rebooting just to properly remove the
kmem_cache object.

But, the code runs under a fairly expensive spinlock and the checks to
see if it is currently enabled are not entirely consistent.  Some use
#ifdef and some #if.

This changes everything to #if and disables the leak checking.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      3935127c
    • Chris Mason's avatar
      Btrfs: sort references by byte number during btrfs_inc_ref · b7a9f29f
      Chris Mason authored 
      When a block goes through cow, we update the reference counts of
everything that block points to.  The internal pointers of the block
can be in just about any order, and it is likely to have clusters of
things that are close together and clusters of things that are not.

To help reduce the seeks that come with updating all of these reference
counts, sort them by byte number before actual updates are done.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      b7a9f29f
    • Chris Mason's avatar
      Btrfs: async threads should try harder to find work · b51912c9
      Chris Mason authored 
      Tracing shows the delay between when an async thread goes to sleep
and when more work is added is often very short.  This commit adds
a little bit of delay and extra checking to the code right before
we schedule out.

It allows more work to be added to the worker
without requiring notifications from other procs.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      b51912c9
    • Jim Owens's avatar
      Btrfs: selinux support · 0279b4cd
      Jim Owens authored 
      Add call to LSM security initialization and save
resulting security xattr for new inodes.

Add xattr support to symlink inode ops.

Set inode->i_op for existing special files.
Signed-off-by: default avatarjim owens <jowens@hp.com>
      0279b4cd
    • Christian Hesse's avatar
      Btrfs: make btrfs acls selectable · bef62ef3
      Christian Hesse authored 
      This patch adds a menu entry to kconfig to enable acls for btrfs.
This allows you to enable FS_POSIX_ACL at kernel compile time.

(updated by Jeff Mahoney to make the changes in fs/btrfs/Kconfig instead)
Signed-off-by: default avatarChristian Hesse <mail@earthworm.de>
Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      bef62ef3
    • Chris Mason's avatar
      Btrfs: Catch missed bios in the async bio submission thread · a6837051
      Chris Mason authored 
      The async bio submission thread was missing some bios that were
added after it had decided there was no work left to do.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      a6837051
  3. 28 Jan, 2009 1 commit
    • Chris Mason's avatar
      Btrfs: fix readdir on 32 bit machines · 89f135d8
      Chris Mason authored 
      After btrfs_readdir has gone through all the directory items, it
sets the directory f_pos to the largest possible int.  This way
applications that mix readdir with creating new files don't
end up in an endless loop finding the new directory items as they go.

It was a workaround for a bug in git, but the assumption was that if git
could make this looping mistake than it would be a common problem.

The largest possible int chosen was INT_LIMIT(typeof(file->f_pos),
and it is possible for that to be a larger number than 32 bit glibc
expects to come out of readdir.

This patches switches that to INT_LIMIT(off_t), which should keep
applications happy on 32 and 64 bit machines.
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      89f135d8
  5. 29 Jan, 2009 1 commit
  7. 28 Jan, 2009 24 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7