Move most of the DAI probe/remove logic into component ops.
This makes things more consistent because the AIC clock is
now managed solely from the component side. And it makes it
easier to add codec switching support later on.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-10-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the component suspend/resume functions near the definition
of the component driver to emphasize that they're unrelated to
the DAI functions.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-9-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The I2S controller on JZ47xx SoCs doesn't impose restrictions on
sample rate and the driver doesn't make any assumptions about it,
so the DAI should advertise a continuous sample rate range.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-8-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The audio controller on JZ47xx SoCs can transfer 20- and 24-bit
samples in the FIFO, so allow those formats to be used with the
I2S driver. Although the FIFO doesn't care about the in-memory
sample format, we only support 4-byte format variants because the
DMA controller on these SoCs cannot transfer in 3-byte multiples.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-7-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some purely cosmetic changes: line up all the macro values to
make things easier to read and sort the includes alphabetically.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-6-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Get rid of a couple of macros and improve readability by using
FIELD_PREP() and GENMASK() for the sample size setting.
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-5-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The differences between register fields on different SoC versions
can be abstracted away using the regmap field API. This is easier
to understand and extend than comparisons based on the version ID.
Since the version IDs are unused after this change, remove them at
the same time, and remove unused macros.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-4-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using regmap for accessing the AIC registers makes the driver a
little easier to read, and later refactors can take advantage of
regmap APIs to further simplify the driver.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-3-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

On the JZ4740, there is a single bit that flushes (empties) both
the transmit and receive FIFO. Later SoCs have independent flush
bits for each FIFO.

Independent FIFOs can be flushed before the snd_soc_dai_active()
check because it won't disturb other active streams. This ensures
that the FIFO we're about to use is always flushed before starting
up. With shared FIFOs we can't do that because if another substream
is active, flushing its FIFO would cause underrun errors.

This also fixes a bug: since we were only setting the JZ4740's
flush bit, which corresponds to the TX FIFO flush bit on other
SoCs, other SoCs were not having their RX FIFO flushed at all.

Fixes: 967beb2e ("ASoC: jz4740: Add jz4780 support")
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-2-aidanmacdonald.0x0@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In configurations with CONFIG_OF=n, we get a harmless build warning:

sound/soc/sunxi/sun50i-dmic.c:268:34: warning: unused variable
'sun50i_dmic_of_match' [-Wunused-const-variable]
Signed-off-by: Ban Tao <fengzheng923@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/1666511085-2748-1-git-send-email-fengzheng923@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Convert the dmic-codec binding to DT schema format.

The '#sound-dai-cells' and 'sound-name-prefix' properties were not
documented, but are in use, so add them.
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221021175721.4005601-1-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

In IPC4 all DSP loadable executable is a 'library' containing modules. The main
or basefw is also a library which contains multiple modules.
IPC4 allows to use loadable libraries to extend the functionality of the booted
basefw.

This series adds support for loading external libraries in case they are needed
by the loaded topology file.

The libraries must be placed to a specific firmware directory (fw_lib_prefix),
which is:
intel/avs-lib|sof-ipc4-lib/ followed by the platform name and in case of
community key use a 'community' directory.

For example for upx-i11 (community key): intel/avs-lib/tgl/community is the
default path.

The name of the library should be the UUID of the module it contains since the
library loading is going to look for the file as <module_UUID>.bin
In case there is a need to bundle multiple modules into single library, symlinks
can be used to point to the file:

module_boundle.bin
<UUID1>.bin -> module_boundle.bin
<UUID2>.bin -> module_boundle.bin
<UUID3>.bin -> module_boundle.bin

But note that in this case all modules will be loaded to the DSP since only the
whole library can be loaded, not individual modules.

In case the requested module is not available among the loaded libraries,
try to load it as external library.

The kernel will try to load the file from <fw_lib_prefix>/<module_uuid>.bin

If the file found, then the ext manifest of it is parsed, placed it under
XArray and the pointer to the module is returned to the caller.

Releasing the firmware will be done on ipc cleanup time.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-20-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The query_fw_configuration callback is redundant and the only user of it
was converted to use the generic post_fw_boot ops.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-19-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Execute the configuration query from the generic post_fw_boot callback and
do not set the query_fw_configuration ops to allow it's removal.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-18-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for executing IPC dependent tasks after a successful firmware
boot.

The new post_fw_boot ops can make the fw_loader query_fw_configuration
callback redundant as IPC code can handle the first boot internally.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-17-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

On Intel HDA platforms the library loading is done via DMA and an IPC
message is also need to be sent to initiate the downloading of the new
library.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-16-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Dynamic loading of external libraries should not be done if the firmware
was booted from IMR since in that case the libraries will be restored along
with the basefw.

The booted_from_imr flag is introduced and set to true if the IMR boot was
successful and to false if cold booting is executed.

The reason for the new flag is that guessing from existing flags, used to
decide if we should try booting from IMR or not is not going to be robust
as the IMR boot itself can fail and in that case a full, cold boot is
executed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-15-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Platforms where external libraries can be supported should set the
load_library callback to implement this functionality.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-14-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The default path for the external firmware libraries are:
intel/avs-lib/<platform>
or
intel/sof-ipc4-lib/<platform>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-13-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

IPC4 based firmware supports dynamically loaded external libraries.
The libraries will be not stored alongside of the firmware or tplg files.

For intel platforms the default path will be:
intel/avs-lib|sof-ipc4-lib/<platform>/ if a community key is used on the
given machine then the libraries will be under 'community' directory, like
it is done for the firmware itself.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-12-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a simple helper to walk the loaded libraries and their modules to make
the ipc4-topology not aware of the underlying infrastructure and simplify
the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-11-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

With IPC4 each DSP loadable binary is a library, which contains
ext_manifest section and loadable modules.
The basefw is no exception, it is always library 0 and it can contain
several modules, depending on the firmware build.

The current code assumes only one binary, which is the basefw and has no
concept of libraries.
This patch introduces the library+modules abstraction and represents the
basefw as library for the IPC4 loader codebase.
The basefw loading and handling is not changing, it is still done by the
generic code, but it's information is cloned under the library
representation.

The libraries are managed via XArray to offload the list and ID management.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-10-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The firmware supports external libraries (containing modules) to be loaded
runtime.
The firmware configuration contains the maximum number of libraries
supported, including the base firmware (which is library 0).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-9-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add support for IPC specific initialization (init) and cleanup (exit)
callback.

These callbacks can be used by IPC implementation to do basic
initialization and cleanup.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-8-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SOF stack now uses the sdev->basefw to work with the SOF firmware, the
information from plat_data can be dropped.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-7-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to access to the firmware struct via sdev->basefw container to
unblock the removal of the firmware information from plat_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to access to the firmware struct via sdev->basefw container to
unblock the removal of the firmware information from plat_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Switch to access to the firmware struct via sdev->basefw container to
unblock the removal of the firmware information from plat_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the firmware related information under a new struct (sof_firmware)
and add it to the high level snd_sof_dev struct.

Convert the generic code to use this new container when working with the
basefw and for compatibility reasons set the old plat_data members used by
the platforms.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Set the FW state to complete right after boot is complete. This enables
sending IPC's in the post_fw_run op. This will be needed to support
reloading 3rd party module libraries after firmware boot.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20221020121238.18339-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'topic/hda-ext-cleanup' of
https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into
asoc-6.2 for further AVS work.

The SPIB and DRMS capabilities are orthogonal to the DSP enablement
and can be used whether the stream is coupled or not.

The existing code partitioning makes limited sense, the capabilities
are parsed at the sound/hda level but helpers are located in
sound/hda/ext.

This patch moves all the SPIB/DRMS functionality to the sound/hda
layer. This reduces the complexity of the sound/hda/ext layer which is
now limited to handling the multi-link extensions and stream
coupling/decoupling helpers.

Note that this is an iso-functionality code move and rename, the
HDaudio legacy driver would need additional changes to make use of
these capabilities.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-11-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

commit 0b00a561 ("ALSA: hdac_ext: add hdac extended controller")
introduced a for() loop on the number of HDaudio codecs that seems
completely useless.

a) the body of the loop does not make use of the loop index, and
b) the LSDIID register is related to the SDI line, so there can only
be one codec per multi-link descriptor.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-10-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

My esteemed colleagues keep using the same words for different things.

The multi-link structure needs to be handled whether the DSP is
enabled or not.

The host and link DMAs are only relevant when the DSP is enabled.

Things get convoluted when there's an ambiguity between the LOSIDV
settings in the multi-link register space and the selection of the
stream_tag for the link DMA.

Clarify with a rename that the static functions used are related to
the host and link DMAs only.

No functionality change, pure rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-9-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

All the helpers dealing with multi-link configurations are located in
the hdac_ext_controller.c, except the two set/clear routines that
modify the LOSIDV registers.

For consistency, move the two helpers and add the 'bus' prefix. One
could argue that the 'ml' prefix might be more relevant but that would
be a larger code change.

No functionality change, just move and rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-8-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We should only use 'link' in the context of multi-link
configurations. Streams are configured from a different register space
and are not dependent on link except for LOSIDV settings.

Not functionality change, just pure rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

No functionality change, just prefix addition to clearly identify that
the helper only applies to the 'ext' part for Intel platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-6-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

We have two helpers with confusing names and different purposes.

Rename bus_get_link() and bus_get_link_at() as bus_get_hlink_by_name()
and bus_get_hlink_by_addr() respectively.

No functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-5-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Follow the convention and use hlink for consistency.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221019162115.185917-4-pierre-louis.bossart@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>