- 04 Nov, 2022 25 commits
-
-
Andrii Nakryiko authored
test_align selftest relies on BPF verifier log emitting register states for specific instructions in expected format. Unfortunately, BPF verifier precision backtracking log interferes with such expectations. And instruction on which precision propagation happens sometimes don't output full expected register states. This does indeed look like something to be improved in BPF verifier, but is beyond the scope of this patch set. So to make test_align a bit more robust, inject few dummy R4 = R5 instructions which capture desired state of R5 and won't have precision tracking logs on them. This fixes tests until we can improve BPF verifier output in the presence of precision tracking. Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20221104163649.121784-7-andrii@kernel.orgSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Andrii Nakryiko authored
Exploit the property of about-to-be-checkpointed state to be able to forget all precise markings up to that point even more aggressively. We now clear all potentially inherited precise markings right before checkpointing and branching off into child state. If any of children states require precise knowledge of any SCALAR register, those will be propagated backwards later on before this state is finalized, preserving correctness. There is a single selftests BPF program change, but tremendous one: 25x reduction in number of verified instructions and states in trace_virtqueue_add_sgs. Cilium results are more modest, but happen across wider range of programs. SELFTESTS RESULTS ================= $ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results.csv ~/imprecise-aggressive-results.csv | grep -v '+0' File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF) ------------------- ----------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- loop6.bpf.linked1.o trace_virtqueue_add_sgs 398057 15114 -382943 (-96.20%) 8717 336 -8381 (-96.15%) ------------------- ----------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- CILIUM RESULTS ============== $ ./veristat -C -e file,prog,insns,states ~/imprecise-early-results-cilium.csv ~/imprecise-aggressive-results-cilium.csv | grep -v '+0' File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF) ------------- -------------------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- bpf_host.o tail_handle_nat_fwd_ipv4 23426 23221 -205 (-0.88%) 1537 1515 -22 (-1.43%) bpf_host.o tail_handle_nat_fwd_ipv6 13009 12904 -105 (-0.81%) 719 708 -11 (-1.53%) bpf_host.o tail_nodeport_nat_ingress_ipv6 5261 5196 -65 (-1.24%) 247 243 -4 (-1.62%) bpf_host.o tail_nodeport_nat_ipv6_egress 3446 3406 -40 (-1.16%) 203 198 -5 (-2.46%) bpf_lxc.o tail_handle_nat_fwd_ipv4 23426 23221 -205 (-0.88%) 1537 1515 -22 (-1.43%) bpf_lxc.o tail_handle_nat_fwd_ipv6 13009 12904 -105 (-0.81%) 719 708 -11 (-1.53%) bpf_lxc.o tail_ipv4_ct_egress 5074 4897 -177 (-3.49%) 255 248 -7 (-2.75%) bpf_lxc.o tail_ipv4_ct_ingress 5100 4923 -177 (-3.47%) 255 248 -7 (-2.75%) bpf_lxc.o tail_ipv4_ct_ingress_policy_only 5100 4923 -177 (-3.47%) 255 248 -7 (-2.75%) bpf_lxc.o tail_ipv6_ct_egress 4558 4536 -22 (-0.48%) 188 187 -1 (-0.53%) bpf_lxc.o tail_ipv6_ct_ingress 4578 4556 -22 (-0.48%) 188 187 -1 (-0.53%) bpf_lxc.o tail_ipv6_ct_ingress_policy_only 4578 4556 -22 (-0.48%) 188 187 -1 (-0.53%) bpf_lxc.o tail_nodeport_nat_ingress_ipv6 5261 5196 -65 (-1.24%) 247 243 -4 (-1.62%) bpf_overlay.o tail_nodeport_nat_ingress_ipv6 5261 5196 -65 (-1.24%) 247 243 -4 (-1.62%) bpf_overlay.o tail_nodeport_nat_ipv6_egress 3482 3442 -40 (-1.15%) 204 201 -3 (-1.47%) bpf_xdp.o tail_nodeport_nat_egress_ipv4 17200 15619 -1581 (-9.19%) 1111 1010 -101 (-9.09%) ------------- -------------------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- Signed-off-by:
-
Andrii Nakryiko authored
Setting reg->precise to true in current state is not necessary from correctness standpoint, but it does pessimise the whole precision (or rather "imprecision", because that's what we want to keep as much as possible) tracking. Why is somewhat subtle and my best attempt to explain this is recorded in an extensive comment for __mark_chain_precise() function. Some more careful thinking and code reading is probably required still to grok this completely, unfortunately. Whiteboarding and a bunch of extra handwaiving in person would be even more helpful, but is deemed impractical in Git commit. Next patch pushes this imprecision property even further, building on top of the insights described in this patch. End results are pretty nice, we get reduction in number of total instructions and states verified due to a better states reuse, as some of the states are now more generic and permissive due to less unnecessary precise=true requirements. SELFTESTS RESULTS ================= $ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results.csv ~/imprecise-early-results.csv | grep -v '+0' File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF) --------------------------------------- ---------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- bpf_iter_ksym.bpf.linked1.o dump_ksym 347 285 -62 (-17.87%) 20 19 -1 (-5.00%) pyperf600_bpf_loop.bpf.linked1.o on_event 3678 3736 +58 (+1.58%) 276 285 +9 (+3.26%) setget_sockopt.bpf.linked1.o skops_sockopt 4038 3947 -91 (-2.25%) 347 343 -4 (-1.15%) test_l4lb.bpf.linked1.o balancer_ingress 4559 2611 -1948 (-42.73%) 118 105 -13 (-11.02%) test_l4lb_noinline.bpf.linked1.o balancer_ingress 6279 6268 -11 (-0.18%) 237 236 -1 (-0.42%) test_misc_tcp_hdr_options.bpf.linked1.o misc_estab 1307 1303 -4 (-0.31%) 100 99 -1 (-1.00%) test_sk_lookup.bpf.linked1.o ctx_narrow_access 456 447 -9 (-1.97%) 39 38 -1 (-2.56%) test_sysctl_loop1.bpf.linked1.o sysctl_tcp_mem 1389 1384 -5 (-0.36%) 26 25 -1 (-3.85%) test_tc_dtime.bpf.linked1.o egress_fwdns_prio101 518 485 -33 (-6.37%) 51 46 -5 (-9.80%) test_tc_dtime.bpf.linked1.o egress_host 519 468 -51 (-9.83%) 50 44 -6 (-12.00%) test_tc_dtime.bpf.linked1.o ingress_fwdns_prio101 842 1000 +158 (+18.76%) 73 88 +15 (+20.55%) xdp_synproxy_kern.bpf.linked1.o syncookie_tc 405757 373173 -32584 (-8.03%) 25735 22882 -2853 (-11.09%) xdp_synproxy_kern.bpf.linked1.o syncookie_xdp 479055 371590 -107465 (-22.43%) 29145 22207 -6938 (-23.81%) --------------------------------------- ---------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- Slight regression in test_tc_dtime.bpf.linked1.o/ingress_fwdns_prio101 is left for a follow up, there might be some more precision-related bugs in existing BPF verifier logic. CILIUM RESULTS ============== $ ./veristat -C -e file,prog,insns,states ~/subprog-precise-results-cilium.csv ~/imprecise-early-results-cilium.csv | grep -v '+0' File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF) ------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- ------------------- bpf_host.o cil_from_host 762 556 -206 (-27.03%) 43 37 -6 (-13.95%) bpf_host.o tail_handle_nat_fwd_ipv4 23541 23426 -115 (-0.49%) 1538 1537 -1 (-0.07%) bpf_host.o tail_nodeport_nat_egress_ipv4 33592 33566 -26 (-0.08%) 2163 2161 -2 (-0.09%) bpf_lxc.o tail_handle_nat_fwd_ipv4 23541 23426 -115 (-0.49%) 1538 1537 -1 (-0.07%) bpf_overlay.o tail_nodeport_nat_egress_ipv4 33581 33543 -38 (-0.11%) 2160 2157 -3 (-0.14%) bpf_xdp.o tail_handle_nat_fwd_ipv4 21659 20920 -739 (-3.41%) 1440 1376 -64 (-4.44%) bpf_xdp.o tail_handle_nat_fwd_ipv6 17084 17039 -45 (-0.26%) 907 905 -2 (-0.22%) bpf_xdp.o tail_lb_ipv4 73442 73430 -12 (-0.02%) 4370 4369 -1 (-0.02%) bpf_xdp.o tail_lb_ipv6 152114 151895 -219 (-0.14%) 6493 6479 -14 (-0.22%) bpf_xdp.o tail_nodeport_nat_egress_ipv4 17377 17200 -177 (-1.02%) 1125 1111 -14 (-1.24%) bpf_xdp.o tail_nodeport_nat_ingress_ipv6 6405 6397 -8 (-0.12%) 309 308 -1 (-0.32%) bpf_xdp.o tail_rev_nodeport_lb4 7126 6934 -192 (-2.69%) 414 402 -12 (-2.90%) bpf_xdp.o tail_rev_nodeport_lb6 18059 17905 -154 (-0.85%) 1105 1096 -9 (-0.81%) ------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- ------------------- Signed-off-by:
-
Andrii Nakryiko authored
Stop forcing precise=true for SCALAR registers when BPF program has any subprograms. Current restriction means that any BPF program, as soon as it uses subprograms, will end up not getting any of the precision tracking benefits in reduction of number of verified states. This patch keeps the fallback mark_all_scalars_precise() behavior if precise marking has to cross function frames. E.g., if subprogram requires R1 (first input arg) to be marked precise, ideally we'd need to backtrack to the parent function and keep marking R1 and its dependencies as precise. But right now we give up and force all the SCALARs in any of the current and parent states to be forced to precise=true. We can lift that restriction in the future. But this patch fixes two issues identified when trying to enable precision tracking for subprogs. First, prevent "escaping" from top-most state in a global subprog. While with entry-level BPF program we never end up requesting precision for R1-R5 registers, because R2-R5 are not initialized (and so not readable in correct BPF program), and R1 is PTR_TO_CTX, not SCALAR, and so is implicitly precise. With global subprogs, though, it's different, as global subprog a) can have up to 5 SCALAR input arguments, which might get marked as precise=true and b) it is validated in isolation from its main entry BPF program. b) means that we can end up exhausting parent state chain and still not mark all registers in reg_mask as precise, which would lead to verifier bug warning. To handle that, we need to consider two cases. First, if the very first state is not immediately "checkpointed" (i.e., stored in state lookup hashtable), it will get correct first_insn_idx and last_insn_idx instruction set during state checkpointing. As such, this case is already handled and __mark_chain_precision() already handles that by just doing nothing when we reach to the very first parent state. st->parent will be NULL and we'll just stop. Perhaps some extra check for reg_mask and stack_mask is due here, but this patch doesn't address that issue. More problematic second case is when global function's initial state is immediately checkpointed before we manage to process the very first instruction. This is happening because when there is a call to global subprog from the main program the very first subprog's instruction is marked as pruning point, so before we manage to process first instruction we have to check and checkpoint state. This patch adds a special handling for such "empty" state, which is identified by having st->last_insn_idx set to -1. In such case, we check that we are indeed validating global subprog, and with some sanity checking we mark input args as precise if requested. Note that we also initialize state->first_insn_idx with correct start insn_idx offset. For main program zero is correct value, but for any subprog it's quite confusing to not have first_insn_idx set. This doesn't have any functional impact, but helps with debugging and state printing. We also explicitly initialize state->last_insns_idx instead of relying on is_state_visited() to do this with env->prev_insns_idx, which will be -1 on the very first instruction. This concludes necessary changes to handle specifically global subprog's precision tracking. Second identified problem was missed handling of BPF helper functions that call into subprogs (e.g., bpf_loop and few others). From precision tracking and backtracking logic's standpoint those are effectively calls into subprogs and should be called as BPF_PSEUDO_CALL calls. This patch takes the least intrusive way and just checks against a short list of current BPF helpers that do call subprogs, encapsulated in is_callback_calling_function() function. But to prevent accidentally forgetting to add new BPF helpers to this "list", we also do a sanity check in __check_func_call, which has to be called for each such special BPF helper, to validate that BPF helper is indeed recognized as callback-calling one. This should catch any missed checks in the future. Adding some special flags to be added in function proto definitions seemed like an overkill in this case. With the above changes, it's possible to remove forceful setting of reg->precise to true in __mark_reg_unknown, which turns on precision tracking both inside subprogs and entry progs that have subprogs. No warnings or errors were detected across all the selftests, but also when validating with veristat against internal Meta BPF objects and Cilium objects. Further, in some BPF programs there are noticeable reduction in number of states and instructions validated due to more effective precision tracking, especially benefiting syncookie test. $ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/subprog-precise-results.csv | grep -v '+0' File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF) ---------------------------------------- -------------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- pyperf600_bpf_loop.bpf.linked1.o on_event 3966 3678 -288 (-7.26%) 306 276 -30 (-9.80%) pyperf_global.bpf.linked1.o on_event 7563 7530 -33 (-0.44%) 520 517 -3 (-0.58%) pyperf_subprogs.bpf.linked1.o on_event 36358 36934 +576 (+1.58%) 2499 2531 +32 (+1.28%) setget_sockopt.bpf.linked1.o skops_sockopt 3965 4038 +73 (+1.84%) 343 347 +4 (+1.17%) test_cls_redirect_subprogs.bpf.linked1.o cls_redirect 64965 64901 -64 (-0.10%) 4619 4612 -7 (-0.15%) test_misc_tcp_hdr_options.bpf.linked1.o misc_estab 1491 1307 -184 (-12.34%) 110 100 -10 (-9.09%) test_pkt_access.bpf.linked1.o test_pkt_access 354 349 -5 (-1.41%) 25 24 -1 (-4.00%) test_sock_fields.bpf.linked1.o egress_read_sock_fields 435 375 -60 (-13.79%) 22 20 -2 (-9.09%) test_sysctl_loop2.bpf.linked1.o sysctl_tcp_mem 1508 1501 -7 (-0.46%) 29 28 -1 (-3.45%) test_tc_dtime.bpf.linked1.o egress_fwdns_prio100 468 435 -33 (-7.05%) 45 41 -4 (-8.89%) test_tc_dtime.bpf.linked1.o ingress_fwdns_prio100 398 408 +10 (+2.51%) 42 39 -3 (-7.14%) test_tc_dtime.bpf.linked1.o ingress_fwdns_prio101 1096 842 -254 (-23.18%) 97 73 -24 (-24.74%) test_tcp_hdr_options.bpf.linked1.o estab 2758 2408 -350 (-12.69%) 208 181 -27 (-12.98%) test_urandom_usdt.bpf.linked1.o urand_read_with_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%) test_urandom_usdt.bpf.linked1.o urand_read_without_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%) test_urandom_usdt.bpf.linked1.o urandlib_read_with_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%) test_urandom_usdt.bpf.linked1.o urandlib_read_without_sema 466 448 -18 (-3.86%) 31 28 -3 (-9.68%) test_xdp_noinline.bpf.linked1.o balancer_ingress_v6 4302 4294 -8 (-0.19%) 257 256 -1 (-0.39%) xdp_synproxy_kern.bpf.linked1.o syncookie_tc 583722 405757 -177965 (-30.49%) 35846 25735 -10111 (-28.21%) xdp_synproxy_kern.bpf.linked1.o syncookie_xdp 609123 479055 -130068 (-21.35%) 35452 29145 -6307 (-17.79%) ---------------------------------------- -------------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- Signed-off-by:
-
Andrii Nakryiko authored
When equivalent completed state is found and it has additional precision restrictions, BPF verifier propagates precision to currently-being-verified state chain (i.e., including parent states) so that if some of the states in the chain are not yet completed, necessary precision restrictions are enforced. Unfortunately, right now this happens only for the last frame (deepest active subprogram's frame), not all the frames. This can lead to incorrect matching of states due to missing precision marker. Currently this doesn't seem possible as BPF verifier forces everything to precise when validated BPF program has any subprograms. But with the next patch lifting this restriction, this becomes problematic. In fact, without this fix, we'll start getting failure in one of the existing test_verifier test cases: #906/p precise: cross frame pruning FAIL Unexpected success to load! verification time 48 usec stack depth 0+0 processed 26 insns (limit 1000000) max_states_per_insn 3 total_states 17 peak_states 17 mark_read 8 This patch adds precision propagation across all frames. Fixes: a3ce685d ("bpf: fix precision tracking") Signed-off-by:
-
Andrii Nakryiko authored
When processing ALU/ALU64 operations (apart from BPF_MOV, which is handled correctly already; and BPF_NEG and BPF_END are special and don't have source register), if destination register is already marked precise, this causes problem with potentially missing precision tracking for the source register. E.g., when we have r1 >>= r5 and r1 is marked precise, but r5 isn't, this will lead to r5 staying as imprecise. This is due to the precision backtracking logic stopping early when it sees r1 is already marked precise. If r1 wasn't precise, we'd keep backtracking and would add r5 to the set of registers that need to be marked precise. So there is a discrepancy here which can lead to invalid and incompatible states matched due to lack of precision marking on r5. If r1 wasn't precise, precision backtracking would correctly mark both r1 and r5 as precise. This is simple to fix, though. During the forward instruction simulation pass, for arithmetic operations of `scalar <op>= scalar` form (where <op> is ALU or ALU64 operations), if destination register is already precise, mark source register as precise. This applies only when both involved registers are SCALARs. `ptr += scalar` and `scalar += ptr` cases are already handled correctly. This does have (negative) effect on some selftest programs and few Cilium programs. ~/baseline-tmp-results.csv are veristat results with this patch, while ~/baseline-results.csv is without it. See post scriptum for instructions on how to make Cilium programs testable with veristat. Correctness has a price. $ ./veristat -C -e file,prog,insns,states ~/baseline-results.csv ~/baseline-tmp-results.csv | grep -v '+0' File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF) ----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- bpf_cubic.bpf.linked1.o bpf_cubic_cong_avoid 997 1700 +703 (+70.51%) 62 90 +28 (+45.16%) test_l4lb.bpf.linked1.o balancer_ingress 4559 5469 +910 (+19.96%) 118 126 +8 (+6.78%) ----------------------- -------------------- --------------- --------------- ------------------ ---------------- ---------------- ------------------- $ ./veristat -C -e file,prog,verdict,insns,states ~/baseline-results-cilium.csv ~/baseline-tmp-results-cilium.csv | grep -v '+0' File Program Total insns (A) Total insns (B) Total insns (DIFF) Total states (A) Total states (B) Total states (DIFF) ------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- ------------------- bpf_host.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%) bpf_host.o tail_nodeport_nat_ipv6_egress 3396 3446 +50 (+1.47%) 201 203 +2 (+1.00%) bpf_lxc.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%) bpf_overlay.o tail_nodeport_nat_ingress_ipv6 4448 5261 +813 (+18.28%) 234 247 +13 (+5.56%) bpf_xdp.o tail_lb_ipv4 71736 73442 +1706 (+2.38%) 4295 4370 +75 (+1.75%) ------------- ------------------------------ --------------- --------------- ------------------ ---------------- ---------------- ------------------- P.S. To make Cilium ([0]) programs libbpf-compatible and thus veristat-loadable, apply changes from topmost commit in [1], which does minimal changes to Cilium source code, mostly around SEC() annotations and BPF map definitions. [0] https://github.com/cilium/cilium/ [1] https://github.com/anakryiko/cilium/commits/libbpf-friendliness Fixes: b5dc0163 ("bpf: precise scalar_value tracking") Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
Refactor map->off_arr handling into generic functions that can work on their own without hardcoding map specific code. The btf_fields_offs structure is now returned from btf_parse_field_offs, which can be reused later for types in program BTF. All functions like copy_map_value, zero_map_value call generic underlying functions so that they can also be reused later for copying to values allocated in programs which encode specific fields. Later, some helper functions will also require access to this btf_field_offs structure to be able to skip over special fields at runtime. Signed-off-by:
Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20221103191013.1236066-9-memxor@gmail.comSigned-off-by:
-
Kumar Kartikeya Dwivedi authored
Now that kptr_off_tab has been refactored into btf_record, and can hold more than one specific field type, accomodate bpf_spin_lock and bpf_timer as well. While they don't require any more metadata than offset, having all special fields in one place allows us to share the same code for allocated user defined types and handle both map values and these allocated objects in a similar fashion. As an optimization, we still keep spin_lock_off and timer_off offsets in the btf_record structure, just to avoid having to find the btf_field struct each time their offset is needed. This is mostly needed to manipulate such objects in a map value at runtime. It's ok to hardcode just one offset as more than one field is disallowed. Signed-off-by:
-
Alexei Starovoitov authored
Andrii Nakryiko says: ==================== This patch set adds a bunch of new featurs and improvements that were sorely missing during recent active use of veristat to develop BPF verifier precision changes. Individual patches provide justification, explanation and often examples showing how new capabilities can be used. ==================== Signed-off-by: -
Andrii Nakryiko authored
Finally add support for filtering stats values, similar to non-comparison mode filtering. For comparison mode 4 variants of stats are important for filtering, as they allow to filter either A or B side, but even more importantly they allow to filter based on value difference, and for verdict stat value difference is MATCH/MISMATCH classification. So with these changes it's finally possible to easily check if there were any mismatches between failure/success outcomes on two separate data sets. Like in an example below: $ ./veristat -e file,prog,verdict,insns -C ~/baseline-results.csv ~/shortest-results.csv -f verdict_diff=mismatch File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF) ------------------------------------- --------------------- ----------- ----------- -------------- --------- --------- ------------------- dynptr_success.bpf.linked1.o test_data_slice success failure MISMATCH 85 0 -85 (-100.00%) dynptr_success.bpf.linked1.o test_read_write success failure MISMATCH 1992 0 -1992 (-100.00%) dynptr_success.bpf.linked1.o test_ringbuf success failure MISMATCH 74 0 -74 (-100.00%) kprobe_multi.bpf.linked1.o test_kprobe failure success MISMATCH 0 246 +246 (+100.00%) kprobe_multi.bpf.linked1.o test_kprobe_manual failure success MISMATCH 0 246 +246 (+100.00%) kprobe_multi.bpf.linked1.o test_kretprobe failure success MISMATCH 0 248 +248 (+100.00%) kprobe_multi.bpf.linked1.o test_kretprobe_manual failure success MISMATCH 0 248 +248 (+100.00%) kprobe_multi.bpf.linked1.o trigger failure success MISMATCH 0 2 +2 (+100.00%) netcnt_prog.bpf.linked1.o bpf_nextcnt failure success MISMATCH 0 56 +56 (+100.00%) pyperf600_nounroll.bpf.linked1.o on_event success failure MISMATCH 568128 1000001 +431873 (+76.02%) ringbuf_bench.bpf.linked1.o bench_ringbuf success failure MISMATCH 8 0 -8 (-100.00%) strobemeta.bpf.linked1.o on_event success failure MISMATCH 557149 1000001 +442852 (+79.49%) strobemeta_nounroll1.bpf.linked1.o on_event success failure MISMATCH 57240 1000001 +942761 (+1647.03%) strobemeta_nounroll2.bpf.linked1.o on_event success failure MISMATCH 501725 1000001 +498276 (+99.31%) strobemeta_subprogs.bpf.linked1.o on_event success failure MISMATCH 65420 1000001 +934581 (+1428.59%) test_map_in_map_invalid.bpf.linked1.o xdp_noop0 success failure MISMATCH 2 0 -2 (-100.00%) test_mmap.bpf.linked1.o test_mmap success failure MISMATCH 46 0 -46 (-100.00%) test_verif_scale3.bpf.linked1.o balancer_ingress success failure MISMATCH 845499 1000001 +154502 (+18.27%) ------------------------------------- --------------------- ----------- ----------- -------------- --------- --------- ------------------- Note that by filtering on verdict_diff=mismatch, it's now extremely easy and fast to see any changes in verdict. Example above showcases both failure -> success transitions (which are generally surprising) and success -> failure transitions (which are expected if bugs are present). Given veristat allows to query relative percent difference values, internal logic for comparison mode is based on floating point numbers, so requires a bit of epsilon precision logic, deviating from typical integer simple handling rules. Signed-off-by:
-
Andrii Nakryiko authored
Introduce the concept of "stat variant", by which it's possible to specify whether to use the value from A (baseline) side, B (comparison or control) side, the absolute difference value or relative (percentage) difference value. To support specifying this, veristat recognizes `_a`, `_b`, `_diff`, `_pct` suffixes, which can be appended to stat name(s). In non-comparison mode variants are ignored (there is only `_a` variant effectively), if no variant suffix is provided, `_b` is assumed, as control group is of primary interest in comparison mode. These stat variants can be flexibly combined with asc/desc orders. Here's an example of ordering results first by verdict match/mismatch (or n/a if one of the sides is missing; n/a is always considered to be the lowest value), and within each match/mismatch/n/a group further sort by number of instructions in B side. In this case we don't have MISMATCH cases, but N/A are split from MATCH, demonstrating this custom ordering. $ ./veristat -e file,prog,verdict,insns -s verdict_diff,insns_b_ -C ~/base.csv ~/comp.csv File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF) ------------------ ------------------------------ ----------- ----------- -------------- --------- --------- -------------- bpf_xdp.o tail_lb_ipv6 N/A success N/A N/A 151895 N/A bpf_xdp.o tail_nodeport_nat_egress_ipv4 N/A success N/A N/A 15619 N/A bpf_xdp.o tail_nodeport_ipv6_dsr N/A success N/A N/A 1206 N/A bpf_xdp.o tail_nodeport_ipv4_dsr N/A success N/A N/A 1162 N/A bpf_alignchecker.o tail_icmp6_send_echo_reply N/A failure N/A N/A 74 N/A bpf_alignchecker.o __send_drop_notify success N/A N/A 53 N/A N/A bpf_host.o __send_drop_notify success N/A N/A 53 N/A N/A bpf_host.o cil_from_host success N/A N/A 762 N/A N/A bpf_xdp.o tail_lb_ipv4 success success MATCH 71736 73430 +1694 (+2.36%) bpf_xdp.o tail_handle_nat_fwd_ipv4 success success MATCH 21547 20920 -627 (-2.91%) bpf_xdp.o tail_rev_nodeport_lb6 success success MATCH 17954 17905 -49 (-0.27%) bpf_xdp.o tail_handle_nat_fwd_ipv6 success success MATCH 16974 17039 +65 (+0.38%) bpf_xdp.o tail_nodeport_nat_ingress_ipv4 success success MATCH 7658 7713 +55 (+0.72%) bpf_xdp.o tail_rev_nodeport_lb4 success success MATCH 7126 6934 -192 (-2.69%) bpf_xdp.o tail_nodeport_nat_ingress_ipv6 success success MATCH 6405 6397 -8 (-0.12%) bpf_xdp.o tail_nodeport_nat_ipv6_egress failure failure MATCH 752 752 +0 (+0.00%) bpf_xdp.o cil_xdp_entry success success MATCH 423 423 +0 (+0.00%) bpf_xdp.o __send_drop_notify success success MATCH 151 151 +0 (+0.00%) bpf_alignchecker.o tail_icmp6_handle_ns failure failure MATCH 33 33 +0 (+0.00%) ------------------ ------------------------------ ----------- ----------- -------------- --------- --------- -------------- Signed-off-by:
-
Andrii Nakryiko authored
When comparing two datasets, if either side is missing corresponding record with the same file and prog name, currently veristat emits misleading zeros/failures, and even tried to calculate a difference, even though there is no data to compare against. This patch improves internal logic of handling such situations. Now we'll emit "N/A" in places where data is missing and comparison is non-sensical. As an example, in an artificially truncated and mismatched Cilium results, the output looks like below: $ ./veristat -e file,prog,verdict,insns -C ~/base.csv ~/comp.csv File Program Verdict (A) Verdict (B) Verdict (DIFF) Insns (A) Insns (B) Insns (DIFF) ------------------ ------------------------------ ----------- ----------- -------------- --------- --------- -------------- bpf_alignchecker.o __send_drop_notify success N/A N/A 53 N/A N/A bpf_alignchecker.o tail_icmp6_handle_ns failure failure MATCH 33 33 +0 (+0.00%) bpf_alignchecker.o tail_icmp6_send_echo_reply N/A failure N/A N/A 74 N/A bpf_host.o __send_drop_notify success N/A N/A 53 N/A N/A bpf_host.o cil_from_host success N/A N/A 762 N/A N/A bpf_xdp.o __send_drop_notify success success MATCH 151 151 +0 (+0.00%) bpf_xdp.o cil_xdp_entry success success MATCH 423 423 +0 (+0.00%) bpf_xdp.o tail_handle_nat_fwd_ipv4 success success MATCH 21547 20920 -627 (-2.91%) bpf_xdp.o tail_handle_nat_fwd_ipv6 success success MATCH 16974 17039 +65 (+0.38%) bpf_xdp.o tail_lb_ipv4 success success MATCH 71736 73430 +1694 (+2.36%) bpf_xdp.o tail_lb_ipv6 N/A success N/A N/A 151895 N/A bpf_xdp.o tail_nodeport_ipv4_dsr N/A success N/A N/A 1162 N/A bpf_xdp.o tail_nodeport_ipv6_dsr N/A success N/A N/A 1206 N/A bpf_xdp.o tail_nodeport_nat_egress_ipv4 N/A success N/A N/A 15619 N/A bpf_xdp.o tail_nodeport_nat_ingress_ipv4 success success MATCH 7658 7713 +55 (+0.72%) bpf_xdp.o tail_nodeport_nat_ingress_ipv6 success success MATCH 6405 6397 -8 (-0.12%) bpf_xdp.o tail_nodeport_nat_ipv6_egress failure failure MATCH 752 752 +0 (+0.00%) bpf_xdp.o tail_rev_nodeport_lb4 success success MATCH 7126 6934 -192 (-2.69%) bpf_xdp.o tail_rev_nodeport_lb6 success success MATCH 17954 17905 -49 (-0.27%) ------------------ ------------------------------ ----------- ----------- -------------- --------- --------- -------------- Internally veristat now separates joining two datasets and remembering the join, and actually emitting a comparison view. This will come handy when we add support for filtering and custom ordering in comparison mode. Signed-off-by:
-
Andrii Nakryiko authored
Make veristat distinguish between table and CSV output formats and use different default set of stats (columns) that are emitted. While for human-readable table output it doesn't make sense to output all known stats, it is very useful for CSV mode to record all possible data, so that it can later be queried and filtered in replay or comparison mode. Signed-off-by:
-
Andrii Nakryiko authored
Define simple expressions to filter not just by file and program name, but also by resulting values of collected stats. Support usual equality and inequality operators. Verdict, which is a boolean-like field can be also filtered either as 0/1, failure/success (with f/s, fail/succ, and failure/success aliases) symbols, or as false/true (f/t). Aliases are case insensitive. Currently this filtering is honored only in verification and replay modes. Comparison mode support will be added in next patch. Here's an example of verifying a bunch of BPF object files and emitting only results for successfully validated programs that have more than 100 total instructions processed by BPF verifier, sorted by number of instructions in ascending order: $ sudo ./veristat *.bpf.o -s insns^ -f 'insns>100' There can be many filters (both allow and deny flavors), all of them are combined. Signed-off-by:
-
Andrii Nakryiko authored
Allow to specify '^' at the end of stat name to designate that it should be sorted in ascending order. Similarly, allow any of 'v', 'V', '.', '!', or '_' suffix "symbols" to designate descending order. It's such a zoo for descending order because there is no single intuitive symbol that could be used (using 'v' looks pretty weird in practice), so few symbols that are "downwards leaning or pointing" were chosen. Either way, it shouldn't cause any troubles in practice. This new feature allows to customize sortering order to match user's needs. Signed-off-by:
-
Andrii Nakryiko authored
Always fall back to unique file/prog comparison if user's custom order specs are ambiguous. This ensures stable output no matter what. Signed-off-by:
-
Andrii Nakryiko authored
Slightly change rules of specifying file/prog glob filters. In practice it's quite often inconvenient to do `*/<prog-glob>` if that program glob is unique enough and won't accidentally match any file names. This patch changes the rules so that `-f <glob>` will apply specified glob to both file and program names. User still has all the control by doing '*/<prog-only-glob>' or '<file-only-glob/*'. We also now allow '/<prog-glob>' and '<file-glob/' (all matching wildcard is assumed if missing). Also, internally unify file-only and file+prog checks (should_process_file and should_process_prog are now should_process_file_prog that can handle prog name as optional). This makes maintaining and extending this code easier. Signed-off-by:
-
Andrii Nakryiko authored
In comparison mode the "Total " part is pretty useless, but takes a considerable amount of horizontal space. Drop the "Total " parts. Also make sure that table headers for numerical columns are aligned in the same fashion as integer values in those columns. This looks better and is now more obvious with shorter "Insns" and "States" column headers. Signed-off-by:
-
Andrii Nakryiko authored
Replay mode allow to parse previously stored CSV file with verification results and present it in desired output (presumable human-readable table, but CSV to CSV convertion is supported as well). While doing that, it's possible to use veristat's sorting rules, specify subset of columns, and filter by file and program name. In subsequent patches veristat's filtering capabilities will just grow making replay mode even more useful in practice for post-processing results. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
To prepare the BPF verifier to handle special fields in both map values and program allocated types coming from program BTF, we need to refactor the kptr_off_tab handling code into something more generic and reusable across both cases to avoid code duplication. Later patches also require passing this data to helpers at runtime, so that they can work on user defined types, initialize them, destruct them, etc. The main observation is that both map values and such allocated types point to a type in program BTF, hence they can be handled similarly. We can prepare a field metadata table for both cases and store them in struct bpf_map or struct btf depending on the use case. Hence, refactor the code into generic btf_record and btf_field member structs. The btf_record represents the fields of a specific btf_type in user BTF. The cnt indicates the number of special fields we successfully recognized, and field_mask is a bitmask of fields that were found, to enable quick determination of availability of a certain field. Subsequently, refactor the rest of the code to work with these generic types, remove assumptions about kptr and kptr_off_tab, rename variables to more meaningful names, etc. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
It is not scalable to maintain a list of types that can have non-zero ref_obj_id. It is never set for scalars anyway, so just remove the conditional on register types and print it whenever it is non-zero. Acked-by:
Dave Marchevsky <davemarchevsky@fb.com> Signed-off-by:
David Vernet <void@manifault.com> Link: https://lore.kernel.org/r/20221103191013.1236066-6-memxor@gmail.comSigned-off-by:
-
Kumar Kartikeya Dwivedi authored
For the case where allow_ptr_leaks is false, code is checking whether slot type is STACK_INVALID and STACK_SPILL and rejecting other cases. This is a consequence of incorrectly checking for register type instead of the slot type (NOT_INIT and SCALAR_VALUE respectively). Fix the check. Fixes: 01f810ac ("bpf: Allow variable-offset stack access") Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
When support was added for spilled PTR_TO_BTF_ID to be accessed by helper memory access, the stack slot was not overwritten to STACK_MISC (and that too is only safe when env->allow_ptr_leaks is true). This means that helpers who take ARG_PTR_TO_MEM and write to it may essentially overwrite the value while the verifier continues to track the slot for spilled register. This can cause issues when PTR_TO_BTF_ID is spilled to stack, and then overwritten by helper write access, which can then be passed to BPF helpers or kfuncs. Handle this by falling back to the case introduced in a later commit, which will also handle PTR_TO_BTF_ID along with other pointer types, i.e. cd17d38f ("bpf: Permits pointers on stack for helper calls"). Finally, include a comment on why REG_LIVE_WRITTEN is not being set when clobber is set to true. In short, the reason is that while when clobber is unset, we know that we won't be writing, when it is true, we *may* write to any of the stack slots in that range. It may be a partial or complete write, to just one or many stack slots. We cannot be sure, hence to be conservative, we leave things as is and never set REG_LIVE_WRITTEN for any stack slot. However, clobber still needs to reset them to STACK_MISC assuming writes happened. However read marks still need to be propagated upwards from liveness point of view, as parent stack slot's contents may still continue to matter to child states. Cc: Yonghong Song <yhs@meta.com> Fixes: 1d68f22b ("bpf: Handle spilled PTR_TO_BTF_ID properly when checking stack_boundary") Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
This is useful in particular to mark the pointer as volatile, so that compiler treats each load and store to the field as a volatile access. The alternative is having to define and use READ_ONCE and WRITE_ONCE in the BPF program. Signed-off-by:
-
Kumar Kartikeya Dwivedi authored
The kernel recognizes some special BPF types in map values or local kptrs. Document that only bpf_spin_lock and bpf_timer will preserve backwards compatibility, and kptr will preserve backwards compatibility for the operations on the pointer, not the types supported for such kptrs. For local kptrs, document that there are no stability guarantees at all. Finally, document that 'bpf_' namespace is reserved for adding future special fields, hence BPF programs must not declare types with such names in their programs and still expect backwards compatibility. Signed-off-by:
-
- 03 Nov, 2022 15 commits
-
-
Stanislav Fomichev authored
syzkaller managed to trigger another case where skb->len == 0 when we enter __dev_queue_xmit: WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 skb_assert_len include/linux/skbuff.h:2576 [inline] WARNING: CPU: 0 PID: 2470 at include/linux/skbuff.h:2576 __dev_queue_xmit+0x2069/0x35e0 net/core/dev.c:4295 Call Trace: dev_queue_xmit+0x17/0x20 net/core/dev.c:4406 __bpf_tx_skb net/core/filter.c:2115 [inline] __bpf_redirect_no_mac net/core/filter.c:2140 [inline] __bpf_redirect+0x5fb/0xda0 net/core/filter.c:2163 ____bpf_clone_redirect net/core/filter.c:2447 [inline] bpf_clone_redirect+0x247/0x390 net/core/filter.c:2419 bpf_prog_48159a89cb4a9a16+0x59/0x5e bpf_dispatcher_nop_func include/linux/bpf.h:897 [inline] __bpf_prog_run include/linux/filter.h:596 [inline] bpf_prog_run include/linux/filter.h:603 [inline] bpf_test_run+0x46c/0x890 net/bpf/test_run.c:402 bpf_prog_test_run_skb+0xbdc/0x14c0 net/bpf/test_run.c:1170 bpf_prog_test_run+0x345/0x3c0 kernel/bpf/syscall.c:3648 __sys_bpf+0x43a/0x6c0 kernel/bpf/syscall.c:5005 __do_sys_bpf kernel/bpf/syscall.c:5091 [inline] __se_sys_bpf kernel/bpf/syscall.c:5089 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5089 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x61/0xc6 The reproducer doesn't really reproduce outside of syzkaller environment, so I'm taking a guess here. It looks like we do generate correct ETH_HLEN-sized packet, but we redirect the packet to the tunneling device. Before we do so, we __skb_pull l2 header and arrive again at skb->len == 0. Doesn't seem like we can do anything better than having an explicit check after __skb_pull? Cc: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+f635e86ec3fa0a37e019@syzkaller.appspotmail.com Signed-off-by:
Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20221027225537.353077-1-sdf@google.comSigned-off-by:
Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
No conflicts. Signed-off-by:Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and netfilter. Current release - regressions: - net: several zerocopy flags fixes - netfilter: fix possible memory leak in nf_nat_init() - openvswitch: add missing .resv_start_op Previous releases - regressions: - neigh: fix null-ptr-deref in neigh_table_clear() - sched: fix use after free in red_enqueue() - dsa: fall back to default tagger if we can't load the one from DT - bluetooth: fix use-after-free in l2cap_conn_del() Previous releases - always broken: - netfilter: netlink notifier might race to release objects - nfc: fix potential memory leak of skb - bluetooth: fix use-after-free caused by l2cap_reassemble_sdu - bluetooth: use skb_put to set length - eth: tun: fix bugs for oversize packet when napi frags enabled - eth: lan966x: fixes for when MTU is changed - eth: dwmac-loongson: fix invalid mdio_node" * tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) vsock: fix possible infinite sleep in vsock_connectible_wait_data() vsock: remove the unused 'wait' in vsock_connectible_recvmsg() ipv6: fix WARNING in ip6_route_net_exit_late() bridge: Fix flushing of dynamic FDB entries net, neigh: Fix null-ptr-deref in neigh_table_clear() net/smc: Fix possible leaked pernet namespace in smc_init() stmmac: dwmac-loongson: fix invalid mdio_node ibmvnic: Free rwi on reset success net: mdio: fix undefined behavior in bit shift for __mdiobus_register Bluetooth: L2CAP: Fix attempting to access uninitialized memory Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect Bluetooth: L2CAP: Fix memory leak in vhci_write Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del() Bluetooth: virtio_bt: Use skb_put to set length Bluetooth: hci_conn: Fix CIS connection dst_type handling Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu netfilter: ipset: enforce documented limit to prevent allocating huge memory isdn: mISDN: netjet: fix wrong check of device registration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix an endian thinko in the asm-generic compat_arg_u64() which led to syscall arguments being swapped for some compat syscalls. - Fix syscall wrapper handling of syscalls with 64-bit arguments on 32-bit kernels, which led to syscall arguments being misplaced. - A build fix for amdgpu on Book3E with AltiVec disabled. Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann. * tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Select ARCH_SPLIT_ARG64 powerpc/32: fix syscall wrappers with 64-bit arguments asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual() powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec
-
Paolo Abeni authored
Daniel Machon says: ==================== Add new PCP and APPTRUST attributes to dcbnl This patch series adds new extension attributes to dcbnl, to support PCP prioritization (and thereby hw offloadable pcp-based queue classification) and per-selector trust and trust order. Additionally, the microchip sparx5 driver has been dcb-enabled to make use of the new attributes to offload PCP, DSCP and Default prio to the switch, and implement trust order of selectors. For pre-RFC discussion see: https://lore.kernel.org/netdev/Yv9VO1DYAxNduw6A@DEN-LT-70577/ For RFC series see: https://lore.kernel.org/netdev/20220915095757.2861822-1-daniel.machon@microchip.com/ In summary: there currently exist no convenient way to offload per-port PCP-based queue classification to hardware. The DCB subsystem offers different ways to prioritize through its APP table, but lacks an option for PCP. Similarly, there is no way to indicate the notion of trust for APP table selectors. This patch series addresses both topics. PCP based queue classification: - 8021Q standardizes the Priority Code Point table (see 6.9.3 of IEEE Std 802.1Q-2018). This patch series makes it possible, to offload the PCP classification to said table. The new PCP selector is not a standard part of the APP managed object, therefore it is encapsulated in a new non-std extension attribute. Selector trust: - ASIC's often has the notion of trust DSCP and trust PCP. The new attribute makes it possible to specify a trust order of app selectors, which drivers can then react on. DCB-enable sparx5 driver: - Now supports offloading of DSCP, PCP and default priority. Only one mapping of protocol:priority is allowed. Consecutive mappings of the same protocol to some new priority, will overwrite the previous. This is to keep a consistent view of the app table and the hardware. - Now supports dscp and pcp trust, by use of the introduced dcbnl_set/getapptrust ops. Sparx5 supports trust orders: [], [dscp], [pcp] and [dscp, pcp]. For now, only DSCP and PCP selectors are supported by the driver, everything else is bounced. Patch #1 introduces a new PCP selector to the APP object, which makes it possible to encode PCP and DEI in the app triplet and offload it to the PCP table of the ASIC. Patch #2 Introduces the new extension attributes DCB_ATTR_DCB_APP_TRUST_TABLE and DCB_ATTR_DCB_APP_TRUST. Trusted selectors are passed in the nested DCB_ATTR_DCB_APP_TRUST_TABLE attribute, and assembled into an array of selectors: u8 selectors[256]; where lower indexes has higher precedence. In the array, selectors are stored consecutively, starting from index zero. With a maximum number of 256 unique selectors, the list has the same maximum size. Patch #3 Sets up the dcbnl ops hook, and adds support for offloading pcp app entries, to the PCP table of the switch. Patch #4 Makes use of the dcbnl_set/getapptrust ops, to set a per-port trust order. Patch #5 Adds support for offloading dscp app entries to the DSCP table of the switch. Patch #6 Adds support for offloading default prio app entries to the switch. ==================== Link: https://lore.kernel.org/r/20221101094834.2726202-1-daniel.machon@microchip.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Daniel Machon authored
Add support for offloading default prio {ETHERTYPE, 0, prio}. Signed-off-by:Daniel Machon <daniel.machon@microchip.com> Signed-off-by:
-
Daniel Machon authored
Add support for offloading dscp app entries. Dscp values are global for all ports on the sparx5 switch. Therefore, we replicate each dscp app entry per-port. Signed-off-by:
-
Daniel Machon authored
Make use of set/getapptrust() to implement per-selector trust and trust order. Signed-off-by:
-
Daniel Machon authored
Add new registers and functions to support offload of pcp app entries. Signed-off-by:
-
Daniel Machon authored
Add new apptrust extension attributes to the 8021Qaz APP managed object. Two new attributes, DCB_ATTR_DCB_APP_TRUST_TABLE and DCB_ATTR_DCB_APP_TRUST, has been added. Trusted selectors are passed in the nested attribute DCB_ATTR_DCB_APP_TRUST, in order of precedence. The new attributes are meant to allow drivers, whose hw supports the notion of trust, to be able to set whether a particular app selector is trusted - and in which order. Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Daniel Machon authored
Add new PCP selector for the 8021Qaz APP managed object. As the PCP selector is not part of the 8021Qaz standard, a new non-std extension attribute DCB_ATTR_DCB_APP has been introduced. Also two helper functions to translate between selector and app attribute type has been added. The new selector has been given a value of 255, to minimize the risk of future overlap of std- and non-std attributes. The new DCB_ATTR_DCB_APP is sent alongside the ieee std attribute in the app table. This means that the dcb_app struct can now both contain std- and non-std app attributes. Currently there is no overlap between the selector values of the two attributes. The purpose of adding the PCP selector, is to be able to offload PCP-based queue classification to the 8021Q Priority Code Point table, see 6.9.3 of IEEE Std 802.1Q-2018. PCP and DEI is encoded in the protocol field as 8*dei+pcp, so that a mapping of PCP 2 and DEI 1 to priority 3 is encoded as {255, 10, 3}. Signed-off-by: -
Saurabh Sengar authored
In large VMs with multiple NUMA nodes, network performance is usually best if network interrupts are all assigned to the same virtual NUMA node. This patch assigns online CPU according to a numa aware policy, local cpus are returned first, followed by non-local ones, then it wraps around. Signed-off-by:
Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Link: https://lore.kernel.org/r/1667282761-11547-1-git-send-email-ssengar@linux.microsoft.comSigned-off-by:
-
Paolo Abeni authored
Dexuan Cui says: ==================== vsock: remove an unused variable and fix infinite sleep Patch 1 removes the unused 'wait' variable. Patch 2 fixes an infinite sleep issue reported by a hv_sock user. ==================== Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.comSigned-off-by:
-
Dexuan Cui authored
Currently vsock_connectible_has_data() may miss a wakeup operation between vsock_connectible_has_data() == 0 and the prepare_to_wait(). Fix the race by adding the process to the wait queue before checking vsock_connectible_has_data(). Fixes: b3f7fd54 ("af_vsock: separate wait data loop") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reported-by:
Frédéric Dalleau <frederic.dalleau@docker.com> Tested-by:
-
Dexuan Cui authored
Remove the unused variable introduced by 19c1b90e. Fixes: 19c1b90e ("af_vsock: separate receive data loop") Signed-off-by:
-
