- 13 Jun, 2017 40 commits
-
-
Himanshu Madhani authored
Fixes following 0-day kernel build warnings: drivers/scsi/qla2xxx/qla_init.c:6407:50: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=] drivers/scsi/qla2xxx/qla_init.c:6709:50: warning: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=] Fixes: b95b9452 ("scsi: qla2xxx: Fix crash due to mismatch mumber of Q-pair creation for Multi queue") Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
An earlier commit ed7fb808477b846bb2 ("scsi: qla2xxx: Remove redundant wait when target is stopped.") removed a null check on ha->tgt.tgt_ops and replaced it with a new check that null checked tgt, thus making the subsequent null check on tgt totally redundant. Remove it. Detected by CoverityScan, CID#1440452 ("Logically Dead Code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
-
Adrian Hunter authored
Add PCI id and variant ops for Intel CNL UFS host controller. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Adrian Hunter authored
Put PM functions under correct config options and use standard PM macros to set callbacks. Signed-off-by:
-
Colin Ian King authored
functions lpfc_nvmet_cleanup_io_context and lpfc_nvmet_setup_io_context can be made static as they do not need to be in global scope. Cleans up sparse warnings: "warning: symbol 'lpfc_nvmet_cleanup_io_context' was not declared. Should it be static?" "warning: symbol 'lpfc_nvmet_setup_io_context' was not declared. Should it be static?" Signed-off-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
Since the SCSI core zeroes driver-private command data, remove that code from the xen-scsifront driver. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
-
Bart Van Assche authored
Since the SCSI core zeroes driver-private command data, remove that code from the virtio driver. Signed-off-by:
-
Bart Van Assche authored
Since the SCSI core zeroes driver-private command data, remove that code from the snic driver. Signed-off-by:
Narsimhulu Musini <nmusini@cisco.com> Reviewed-by:
-
Bart Van Assche authored
This patch reduces code duplication. There are two functional changes in this patch: - It causes scsi_mq_prep_fn() to clear driver-private command data, just like the already upstream commit 1bad6c4a ("scsi: zero per-cmd private driver data for each MQ I/O"). - The initialization of .prot_sdb is moved from scsi_mq_prep_fn() into scsi_init_request(). [mkp: applied by hand] Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality but makes the next patch easier to read. Signed-off-by:
-
Bart Van Assche authored
Just like for the scsi-mq code path, in the single queue SCSI code path only add commands to the per-device command list if required by the SCSI LLD. This patch will make it easier to merge the single-queue and multiqueue command initialization code. Signed-off-by:
-
Bart Van Assche authored
If a device is blocked, make __scsi_remove_device() cause it to transition to the DEL state. This means that all the commands issued in .shutdown() will error in the mid-layer, thus making the removal proceed without being stopped. This patch is a slightly modified version of a patch from James Bottomley. This patch avoids that the following lockup occurs: Call Trace: schedule+0x35/0x80 schedule_timeout+0x237/0x2d0 io_schedule_timeout+0xa6/0x110 wait_for_completion_io+0xa3/0x110 blk_execute_rq+0xdf/0x120 scsi_execute+0xce/0x150 [scsi_mod] scsi_execute_req_flags+0x8f/0xf0 [scsi_mod] sd_sync_cache+0xa9/0x190 [sd_mod] sd_shutdown+0x6a/0x100 [sd_mod] sd_remove+0x64/0xc0 [sd_mod] __device_release_driver+0x8d/0x120 device_release_driver+0x1e/0x30 bus_remove_device+0xf9/0x170 device_del+0x127/0x240 __scsi_remove_device+0xc1/0xd0 [scsi_mod] scsi_forget_host+0x57/0x60 [scsi_mod] scsi_remove_host+0x72/0x110 [scsi_mod] srp_remove_work+0x8b/0x200 [ib_srp] Reported-by:
Israel Rukshin <israelr@mellanox.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Israel Rukshin <israelr@mellanox.com> Cc: Max Gurtovoy <maxg@mellanox.com> Cc: Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by:
-
Bart Van Assche authored
This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Serializing SCSI device state changes avoids that two state changes can occur concurrently, e.g. the state changes in scsi_target_block() and __scsi_remove_device(). This serialization is essential to make patch "Make __scsi_remove_device go straight from BLOCKED to DEL" work reliably. Enable this mechanism for all scsi_target_*block() callers but not for the scsi_internal_device_unblock() calls from the mpt3sas driver because that driver can call scsi_internal_device_unblock() from atomic context. Signed-off-by:
-
Bart Van Assche authored
This will make it easier to serialize SCSI device state changes through a mutex. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Bart Van Assche authored
Instead of passing a "wait" argument to scsi_internal_device_block(), split this function into a function that waits and a function that doesn't wait. This will make it easier to serialize SCSI device state changes through a mutex. Signed-off-by:
-
Bart Van Assche authored
Dereferencing shost from scsi_exit_rq() is not safe because the SCSI host may already have been freed when scsi_exit_rq() is called. Increasing the shost reference count in scsi_init_rq() and dropping that reference in scsi_exit_rq() is nontrivial since scsi_host_dev_release() may sleep and since scsi_exit_rq() may be called from interrupt context. Since scsi_exit_rq() only needs a single bit from shost, copy that bit into struct scsi_cmnd. Reported-by:
Scott Bauer <scott.bauer@intel.com> Fixes: e9c787e6 ("scsi: allocate scsi_cmnd structures as part of struct request") Signed-off-by:
-
Jia-Ju Bai authored
The driver may sleep under a spin lock, and the function call path is: mraid_mm_attach_buf (acquire the lock by spin_lock_irqsave) pci_pool_alloc(GFP_KERNEL) --> may sleep To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". [mkp: fixed whitespace] Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
-
Szymon Mielczarek authored
Move the initialization of clocks list head to ufshcd_alloc_host() so that every driver doesn't have to do it. Remove checks for the list head being NULL because that is not possible. Signed-off-by:
Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
-
Michael Schmitz authored
m68k_num_memory is unsuitable to test for the presence of FastRAM on CT60 if the kernel is located in FastRAM: in arch/m68k/mm/motorola.c the ST-RAM chunk is skipped and m68k_num_memory is decremented in this case. m68k_realnum_memory still contains the actual number of RAM chunks so use that. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Tested-by:
Christian T. Steigies <cts@debian.org> Signed-off-by:
-
Corentin Labbe authored
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which already have them. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
-
Dupuis, Chad authored
sc_cmd->sense_buffer is not guaranteed to be allocated so we need to sc_cmd->check if the pointer is NULL before trying to copy anything into it. Fixes the crash: [ 143.793176] [0000:00:00.0]:[qedf_eh_device_reset:626]: LUN RESET Issued... [ 143.802996] BUG: unable to handle kernel NULL pointer dereference at (null) [ 143.803063] IP: qedf_parse_fcp_rsp+0xe2/0x290 [qedf] [ 143.803077] PGD 0 [ 143.803078] P4D 0 [ 143.803103] Oops: 0002 [#1] SMP [ 143.803115] Modules linked in: msr(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) raw(E) scsi_transport_iscsi(E) br_netfilter(E) bridge(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl(E) sb_edac(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) xfs(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) ipmi_ssif(E) glue_helper(E) iTCO_wdt(E) iTCO_vendor_support(E) lpc_ich(E) ipmi_si(E) pcspkr(E) hpilo(E) ioatdma(E) cryptd(E) ipmi_devintf(E) hpwdt(E) mfd_core(E) shpchp(E) dca(E) thermal(E) pcc_cpufreq(E) ipmi_msghandler(E) acpi_cpufreq(E) af_packet(E) btrfs(E) xor(E) raid6_pq(E) sr_mod(E) cdrom(E) ata_generic(E) sd_mod(E) 8021q(E) garp(E) [ 143.803302] stp(E) llc(E) mrp(E) bnx2fc(E) cnic(E) uio(E) mgag200(E) ata_piix(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) ahci(E) fb_sys_fops(E) bnx2x(E) qedf(E) serio_raw(E) libahci(E) ttm(E) uhci_hcd(E) ehci_pci(E) qed(E) mdio(E) libcrc32c(E) ehci_hcd(E) crc32c_intel(E) drm(E) libata(E) usbcore(E) tg3(E) ptp(E) hpsa(E) pps_core(E) scsi_transport_sas(E) libphy(E) wmi(E) button(E) fcoe(E) libfcoe(E) libfc(E) scsi_transport_fc(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) autofs4(E) [ 143.803438] CPU: 31 PID: 494 Comm: kworker/31:2 Tainted: G E 4.12.0-rc1-69-default+ #1 [ 143.803461] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [ 143.803480] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf] [ 143.803496] task: ffff8804181a0000 task.stack: ffffc90003b64000 [ 143.803514] RIP: 0010:qedf_parse_fcp_rsp+0xe2/0x290 [qedf] [ 143.803529] RSP: 0018:ffffc90003b67dc8 EFLAGS: 00010246 [ 143.803544] RAX: 0000000000000000 RBX: ffff880401abdd48 RCX: 000000000000000c [ 143.803563] RDX: 0000000000000060 RSI: ffffffffa039c740 RDI: 0000000000000000 [ 143.803581] RBP: ffffc90003b67df0 R08: ffffffffa039dba8 R09: 0000000000000000 [ 143.803600] R10: 0000000000000000 R11: 0000000000000018 R12: 0000000000000000 [ 143.803619] R13: ffff88040ac80bc8 R14: 0000000000000008 R15: ffff880407c14008 [ 143.803638] FS: 0000000000000000(0000) GS:ffff88043f7c0000(0000) knlGS:0000000000000000 [ 143.804360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 143.805065] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000000406e0 [ 143.805753] Call Trace: [ 143.806436] qedf_process_tmf_compl+0x19/0x30 [qedf] [ 143.807124] qedf_process_cqe+0x265/0x280 [qedf] [ 143.807800] qedf_fp_io_handler+0x26/0x60 [qedf] [ 143.808469] process_one_work+0x138/0x370 [ 143.809133] worker_thread+0x4d/0x3b0 [ 143.809797] kthread+0x109/0x140 [ 143.810451] ? rescuer_thread+0x320/0x320 [ 143.811100] ? kthread_park+0x60/0x60 [ 143.811743] ret_from_fork+0x2c/0x40 Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Quinn Tran authored
Remove extra register read in each interrupt processing to improve performance. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
When driver is unloaded, all sessions are torn down, all commmands are flushed, chip is reset to ensure there is no knowledge of target mode in ISP. The irq_cmd_count field was used to make sure all commands are processed on top of that. The irq_cmd_count is now redundant and not needed. Signed-off-by:
-
Quinn Tran authored
Accelerate generation of SCSI busy to let initiators slow down when target is running low in resources. Signed-off-by:
-
Quinn Tran authored
Current code already destroy all target sessions when target Mode is stopped. Target core would waits for all commands that belong to each session to purge. The extra wait for interrupts to settle down is not relevant. Signed-off-by:
-
Quinn Tran authored
Previously, the ql2xexchoffld module parameter was used to control the max number of exchanges to be offload onto host memory. Module parameter ql_dm_tgt_ex_pct was used to control the percentage of exchanges allocated to the Target side. With this patch, module parameter ql_dm_tgt_ex_pct is no longer used to control exchanges for the driver. New module parameter ql2xiniexchg is added to control exchanges between target mode and initiator mode. With the updated module parameters, users can control the exact number of exchanges for either Initiator or Target. The exchange offload feature will be automatically enabled when the total number of exchanges exceeds 2048 limit. Signed-off-by:
-
Quinn Tran authored
Tell FW to track exchange/cmd state to prevent driver from using stale exchange or exchange that is not meant for this command. Signed-off-by:
-
Quinn Tran authored
Assign unique id to all traces and logs for debug purpose. Signed-off-by:
-
Quinn Tran authored
Name server login is normally handle by FW. In some rare case where one of the switches is being updated, name server login could get affected. Trigger relogin to name server when driver detects this condition. Signed-off-by:
-
Quinn Tran authored
Acked-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sawan Chandak authored
There is already flag defined PFLG_DISCONNECTED, which is set for PCI or register disconnect error condition. There is no need to have flag PCI_ERR, which has same purpose. Remove use of PCI_ERR flag and use PFLG_DISCONNECTED flag during error condition. Signed-off-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
-
Quinn Tran authored
In case of hardware queue full, commands can loop between TCM stack and tcm_qla2xx shim layers for retry. While command is waiting for retry, task mgmt can get ahead and abort the cmmand that encountered queue full condition. Fix this by dropping the command, if task mgmt has already started the command free process. Acked-by:
-
Quinn Tran authored
If the port is moved/changed, current code would trigger a deletion. If the port is already deleted, then do relogin. Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Quinn Tran authored
Convert usage of spin_lock to spin_lock_irqsave because qla2xxx driver can access all the data structures in an interrupt context. Signed-off-by:
-
Quinn Tran authored
Driver added mechanism to move ABTS/PUREX/RIDA mailbox to ATIO queue as part of commit id 41dc529a ("qla2xxx: Improve RSCN handling in driver"). This patch adds a check to only allow ABTS/PURX/RIDA to be moved to ATIO Queue for ISP83XX and ISP27XX. Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Add the change_queue_depth member to our SCSI host template so the queue depth of devices attached to qedf can be changed dynamically. Signed-off-by:
-
Chad Dupuis authored
Increase the default number of commands that the driver tells the SCSI mid-layer it can do to increase the default performance of the driver. Signed-off-by:
-
