- 13 Oct, 2023 25 commits
-
-
Maciej Wieczor-Retman authored
resctrlfs.c contains mostly functions that interact in some way with resctrl FS entries while functions inside resctrl_val.c deal with measurements and benchmarking. run_benchmark() is located in resctrlfs.c even though it's purpose is not interacting with the resctrl FS but to execute cache checking logic. Move run_benchmark() to resctrl_val.c just before resctrl_val() that makes use of run_benchmark(). Make run_benchmark() static since it's not used between multiple files anymore. Remove return comment from kernel-doc since the function is type void. Signed-off-by:
Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> Reviewed-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org>
-
Maciej Wieczor-Retman authored
Writing bitmasks to the schemata can fail when the bitmask doesn't adhere to constraints defined by what a particular CPU supports. Some example of constraints are max length or having contiguous bits. The driver should properly return errors when any rule concerning bitmask format is broken. Resctrl FS returns error codes from fprintf() only when fclose() is called. Current error checking scheme allows invalid bitmasks to be written into schemata file and the selftest doesn't notice because the fclose() error code isn't checked. Substitute fopen(), flose() and fprintf() with open(), close() and write() to avoid error code buffering between fprintf() and fclose(). Remove newline character from the schema string after writing it to the schemata file so it prints correctly before function return. Pass the string generated with strerror() to the "reason" buffer so the error message is more verbose. Extend "reason" buffer so it can hold longer messages. Signed-off-by:
-
Ilpo Järvinen authored
The initial value of 5% chosen for the maximum allowed percentage difference between resctrl mbm value and IMC mbm value in commit 06bd03a5 ("selftests/resctrl: Fix MBA/MBM results reporting format") was "randomly chosen value" (as admitted by the changelog). When running tests in our lab across a large number platforms, 5% difference upper bound for success seems a bit on the low side for the MBA and MBM tests. Some platforms produce outliers that are slightly above that, typically 6-7%, which leads MBA/MBM test frequently failing. Replace the "randomly chosen value" with a success bound that is based on those measurements across large number of platforms by relaxing the MBA/MBM success bound to 8%. The relaxed bound removes the failures due the frequent outliers. Fixed commit description style error during merge: Shuah Khan <skhan@linuxfoundation.org> Fixes: 06bd03a5 ("selftests/resctrl: Fix MBA/MBM results reporting format") Signed-off-by:
Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by:
-
Ilpo Järvinen authored
The MBA and CMT tests expect support of other features to be able to run. When platform only supports MBA but not MBM, MBA test will fail with: Failed to open total bw file: No such file or directory When platform only supports CMT but not CAT, CMT test will fail with: Failed to open bit mask file '/sys/fs/resctrl/info/L3/cbm_mask': No such file or directory It leads to the test reporting test fail (even if no test was run at all). Extend feature checks to cover these two conditions to show these tests were skipped rather than failed. Fixes: ee041568 ("selftests/resctrl: Use resctrl/info for feature detection") Signed-off-by:
-
Ilpo Järvinen authored
Feature check in validate_resctrl_feature_request() takes in the test name string and maps that to what to check per test. Pass resource and feature names to validate_resctrl_feature_request() directly rather than deriving them from the test name inside the function which makes the feature check easier to extend for new test cases. Use !! in the return statement to make the boolean conversion more obvious even if it is not strictly necessary from correctness point of view (to avoid it looking like the function is returning a freed pointer). Signed-off-by:
-
Ilpo Järvinen authored
_GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large impact on what gets defined when including headers either before or after it. This can result in compile failures if .c file decides to include a standard header file before resctrl.h. It is safer to define _GNU_SOURCE in Makefile so it is always defined regardless of in which order includes are done. Signed-off-by:
-
Ilpo Järvinen authored
The test runner run_cmt_test() in resctrl_tests.c checks for CMT feature and does not run cmt_resctrl_val() if CMT is not supported. Then cmt_resctrl_val() also check is CMT is supported. Remove the duplicated feature check for CMT from cmt_resctrl_val(). Signed-off-by:
-
Ilpo Järvinen authored
Unmounting resctrl FS has been moved into the per test functions in resctrl_tests.c by commit caddc0fb ("selftests/resctrl: Move resctrl FS mount/umount to higher level"). In case a signal (SIGINT, SIGTERM, or SIGHUP) is received, the running selftest is aborted by ctrlc_handler() which then unmounts resctrl fs before exiting. The current section between signal_handler_register() and signal_handler_unregister(), however, does not cover the entire duration when resctrl FS is mounted. Move signal_handler_register() and signal_handler_unregister() calls from per test files into resctrl_tests.c to properly unmount resctrl fs. In order to not add signal_handler_register()/unregister() n times, create helpers test_prepare() and test_cleanup(). Do not call ksft_exit_fail_msg() in test_prepare() but only in the per test function to keep the control flow cleaner without adding calls to exit() deep into the call chain. Adjust child process kill() call in ctrlc_handler() to only be invoked if the child was already forked. Fixes: caddc0fb ("selftests/resctrl: Move resctrl FS mount/umount to higher level") Signed-off-by:
-
Ilpo Järvinen authored
signal_handler_unregister() calls sigaction() with uninitializing sa_flags in the struct sigaction. Make sure sa_flags is always initialized in signal_handler_unregister() by initializing the struct sigaction when declaring it. Also add the initialization to signal_handler_register() even if there are no know bugs in there because correctness is then obvious from the code itself. Fixes: 73c55fa5 ("selftests/resctrl: Commonize the signal handler register/unregister for all tests") Suggested-by:
-
Ilpo Järvinen authored
Benchmark argument is handled by custom argument parsing code which is more complicated than it needs to be. Process benchmark argument within the normal getopt() handling and drop unnecessary ben_ind and has_ben variables. When -b is given, terminate the argument processing as -b consumes all remaining arguments. Signed-off-by:
-
Ilpo Järvinen authored
ben_count is only used to write the terminator for the list. It is enough to use i from the loop so no need for another variable. Remove ben_count variable as it is not needed. Signed-off-by:
-
Ilpo Järvinen authored
Benchmark command is used in multiple tests so it should not be mutated by the tests but CMT test alters span argument. Due to the order of tests (CMT test runs last), mutating the span argument in CMT test does not trigger any real problems currently. Mark benchmark_cmd strings as const and setup the benchmark command using pointers. Because the benchmark command becomes const, the input arguments can be used directly. Besides being simpler, using the input arguments directly also removes the internal size restriction. CMT test has to create a copy of the benchmark command before altering the benchmark command. Signed-off-by:
-
Ilpo Järvinen authored
Benchmark command is initialized before resctrl FS check and preparation code that can call ksft_exit_skip(). There is no strong reason why the resctrl FS support check and unmounting it (if already mounted), has to be done after the benchmark command initialization. Move benchmark command initialization such that it is done not until right before the tests commence. This simplifies rollback handling when benchmark command initialization starts to use dynamic allocation (in a change following this). Signed-off-by:
-
Ilpo Järvinen authored
struct resctrl_val_param contains span member. resctrl_val(), however, never uses it because the value of span is embedded into the default benchmark command and parsed from it by run_benchmark(). Remove span from resctrl_val_param. Provide DEFAULT_SPAN for the code that needs it. CMT and CAT tests communicate span that is different from the DEFAULT_SPAN between their internal functions which is converted into passing it directly as a parameter. Signed-off-by:
-
Ilpo Järvinen authored
bw_report is always set to "reads" and bm_type is set to "fill_buf" but is never used. Set bw_report directly to "reads" in MBA/MBM test and remove bm_type. Signed-off-by:
-
Ilpo Järvinen authored
Benchmark command must be the last argument because it consumes all the remaining arguments but help misleadingly shows it as the first argument. The benchmark command is also shown in quotes but it does not match with the code. Correct -b argument place in the help message and remove the quotes. Tweak also how the options are presented by using ... notation. Signed-off-by:
-
Ilpo Järvinen authored
Benchmark command is copied into an array in the stack. The array is BENCHMARK_ARGS items long but the command line could try to provide a longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63 bytes of space after fitting the terminating \0 character) and user could have inputted argument longer than that. Return error in case the benchmark command does not fit to the space allocated for it. Fixes: ecdbb911 ("selftests/resctrl: Add MBM test") Signed-off-by:
-
Maciej Wieczor-Retman authored
Compiling resctrl selftest after adding a __printf() attribute to ksft_print_msg() exposes -Wformat warning in show_cache_info(). The format specifier used expects a variable of type int but a long unsigned int variable is passed instead. Change the format specifier to match the passed variable. Signed-off-by:
-
Maciej Wieczor-Retman authored
Compiling mm selftest after adding a __printf() attribute to ksft_print_msg() exposes -Wformat warning in remap_region(). Fix the wrong format specifier causing the warning. The mm selftest uses the printf attribute in its full form. Since the header file that uses it also includes kselftests.h it can use the macro defined there. Use __printf() included with kselftests.h instead of the full attribute. Signed-off-by:
-
Maciej Wieczor-Retman authored
The __printf() macro is used in many tools in the linux kernel to validate the format specifiers in functions that use printf. The kvm selftest uses it without putting it in a macro definition while it also imports the kselftests.h header where the macro attribute is defined. Use __printf() from kselftests.h instead of the full attribute. Signed-off-by:
-
Maciej Wieczor-Retman authored
Compiling sigaltstack selftest after adding a __printf() attribute to ksft_print_msg() exposes -Wformat warning in main(). The format specifier inside ksft_print_msg() expects a long unsigned int but the passed variable is of unsigned int type. Fix the format specifier so it matches the passed variable. Signed-off-by:
-
Maciej Wieczor-Retman authored
Compiling pidfd selftest after adding a __printf() attribute to ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings in error_report(), test_pidfd_poll_exec_thread(), child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(), child_poll_leader_exit_test(). The ksft_test_result_pass() in error_report() expects a string but doesn't provide any argument after the format string. All the other calls to ksft_print_msg() in the functions mentioned above have format strings that don't match with other passed arguments. Fix format specifiers so they match the passed variables. Add a missing variable to ksft_test_result_pass() inside error_report() so it matches other cases in the switch statement. Fixes: 2def297e ("pidfd: add tests for NSpid info in fdinfo") Signed-off-by:
-
Maciej Wieczor-Retman authored
Compiling openat2 selftest after adding a __printf() attribute to ksft_print_msg() exposes a -Wformat warning in test_openat2_flags(). The wrong format specifier is used for printing test.how->flags variable. Change the format specifier to %llX so it matches the printed variable. Signed-off-by:
-
Maciej Wieczor-Retman authored
Compiling cachestat selftest after adding a __printf() attribute to ksft_print_msg() exposes a -Wformat warning in print_cachestat(). The format specifier in printf() call expects long int variables and received long long int. Change format specifiers to long long int so they match passed variables. Signed-off-by:
Nhat Pham <nphamcs@gmail.com> Signed-off-by:
-
Maciej Wieczor-Retman authored
Kselftest header defines multiple variadic functions that use printf along with other logic. There is no format checking for the variadic functions that use printing inside kselftest.h. Because of this the compiler won't be able to catch instances of mismatched printf formats and debugging tests might be more difficult. Add the common __printf() attribute macro to kselftest.h. Add __printf() attribute to every function using formatted printing with variadic arguments. Adding the attribute and compiling all selftests exposes a number of -Wformat warnings which were previously unnoticed due to a lack of format specifiers checking by the compiler. Signed-off-by:
-
- 09 Oct, 2023 1 commit
-
-
Marcos Paulo de Souza authored
Currently the bpf selftests are skipped by default, so is someone would like to run the tests one would need to run: $ make TARGETS=bpf SKIP_TARGETS="" kselftest To overwrite the SKIP_TARGETS that defines bpf by default. Also, following the BPF instructions[1], to run the bpf selftests one would need to enter in the tools/testing/selftests/bpf/ directory, and then run make, which is not the standard way to run selftests per it's documentation. For the reasons above stop mentioning bpf in the kselftests as examples of how to run a test suite. [1]: Documentation/bpf/bpf_devel_QA.rst Signed-off-by:
Marcos Paulo de Souza <mpdesouza@suse.com> Signed-off-by:
-
- 06 Oct, 2023 4 commits
-
-
Muhammad Usama Anjum authored
These duplicate defines should automatically be picked up from kernel headers. Signed-off-by:
Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by:
-
Muhammad Usama Anjum authored
Remove duplicate defines which are already defined in kernel headers and re-definition isn't required. Signed-off-by:
-
Muhammad Usama Anjum authored
Remove duplicate defines which are already included in kernel headers. MAX_PID_NS_LEVEL macro is used inside kernel only. It isn't exposed to userspace. So it is never defined in test application. Remove #ifndef in this case. Signed-off-by:
-
Muhammad Usama Anjum authored
These duplicate defines should automatically be picked up from kernel headers. Use KHDR_INCLUDES to add kernel header files. Signed-off-by:
-
- 05 Oct, 2023 10 commits
-
-
Mark Brown authored
Currently the nsleep-lat test does not produce KTAP output but rather a custom format. This means that we only get a pass/fail for the suite, not for each individual test that the suite does. Convert to using the standard kselftest output functions which result in KTAP output being generated. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mark Brown authored
Currently the posix_timers test does not produce KTAP output but rather a custom format. This means that we only get a pass/fail for the suite, not for each individual test that the suite does. Convert to using the standard kselftest output functions which result in KTAP output being generated. As part of this fix the printing of diagnostics in the unlikely event that the pthread APIs fail, these were using perror() but the API functions directly return an error code instead of setting errno. Signed-off-by:
-
Mark Brown authored
Currently the execveat test does not produce KTAP output but rather a custom format. This means that we only get a pass/fail for the suite, not for each individual test that the suite does. Convert to using the standard kselftest output functions which result in KTAP output being generated. The main trick with this is that, being an exec() related test, the program executes itself and returns specific exit codes to verify success meaning that we need to only use the top level kselftest header/summary functions when invoked directly rather than when run as part of a test. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Mark Brown authored
The standard library perror() function provides a convenient way to print an error message based on the current errno but this doesn't play nicely with KTAP output. Provide a helper which does an equivalent thing in a KTAP compatible format. nolibc doesn't have a strerror() and adding the table of strings required doesn't seem like a good fit for what it's trying to do so when we're using that only print the errno. Signed-off-by:
-
Javier Carrasco authored
As a general rule, the name of the selftest is printed at the beginning of every message. Use "static_keys" (name of the test itself) consistently instead of mixing "static_key" and "static_keys" at the beginning of the messages in the test_static_keys script. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by:
-
Javier Carrasco authored
The ret variable is used to check function return values and assigning values to it on error has no effect as it is an unused value. The current implementation uses an additional variable (fret) to return the error value, which in this case is unnecessary and lead to the above described misuse. There is no restriction in the current implementation to always return -1 on error and the actual negative error value can be returned safely without storing -1 in a specific variable. Simplify the error checking by using a single variable which always holds the returned value. Signed-off-by:
-
Björn Töpel authored
Some kselftests has a per-arch config, e.g. tools/testing/selftests/bpf/config.s390x. Make sure these configs are picked up by the kselftest-merge target. Signed-off-by:
Björn Töpel <bjorn@rivosinc.com> Signed-off-by:
-
Björn Töpel authored
The kselftest-merge target walks all kselftests configs, and merges them. However, builtin does not have precedence over modules. This breaks some of the tests, e.g.: $ grep CONFIG_NF_NAT tools/testing/selftests/{bpf,net}/config tools/testing/selftests/bpf/config:CONFIG_NF_NAT=y tools/testing/selftests/net/config:CONFIG_NF_NAT=m Here, the net config will set NF_NAT to module, which makes it clunky to run the BPF tests. Add '-y' to scripts/kconfig/merge_config.sh. Signed-off-by: -
Javier Carrasco authored
dmabuf-heaps builds a dmabuf-heap binary that can be ignored by git. Signed-off-by:
-
Javier Carrasco authored
tdx builds a tdx_guest_test binary that can be ignored by git. Signed-off-by:
-
