- 20 Jul, 2022 18 commits
-
-
Oleksandr Mazur authored
For SFP port prestera driver will use kernel phylink infrastucture to configure port mode based on the module that has beed inserted Co-developed-by:
Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by:
Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrey Turkin authored
Some tools (e.g. libxdp) use that information. Signed-off-by:
Andrey Turkin <andrey.turkin@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'linux-can-next-for-5.20-20220720' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== this is a pull request of 29 patches for net-next/master. The first 6 patches target the slcan driver. Dan Carpenter contributes a hardening patch, followed by 5 cleanup patches. Biju Das contributes 5 patches to prepare the sja1000 driver to support the Renesas RZ/N1 SJA1000 CAN controller. Dario Binacchi's patch for the slcan driver fixes a sleep with held spin lock. Another patch by Dario Binacchi fixes a wrong comment in the c_can driver. Pavel Pisa updates the CTU CAN FD IP core registers. Stephane Grosjean contributes 3 patches to the peak_usb driver for cleanups and support of a new MCU. The last 12 patches are by Vincent Mailhol, they fix and improve the txerr and rxerr reporting in all CAN drivers. ==================== Signed-off-by:
-
Marc Kleine-Budde authored
Vincent Mailhol says: ==================== can: error: set of fixes and improvement on txerr and rxerr reporting This series is a collection of patches targeting the CAN error counter. The series is split in three blocks (with small relation to each other). Several drivers uses the data[6] and data[7] fields (both of type u8) of the CAN error frame to report those values. However, the maximum size an u8 can hold is 255 and the error counter can exceed this value if bus-off status occurs. As such, the first nine patches of this series make sure that no drivers try to report txerr or rxerr through the CAN error frame when bus-off status is reached. can_frame::data[5..7] are defined as being "controller specific". Controller specific behaviors are not something desirable (portability issue...) The tenth patch of this series specifies how can_frame::data[5..7] should be use and remove any "controller specific" freedom. The eleventh patch adds a flag to notify though can_frame::can_id that data[6..7] were populated (in order to be consistent with other fields). Finally, the twelfth and last patch add three macro values to specify the different error counter threshold with so far was hard-coded as magic numbers in the drivers. N.B.: * patches 1 to 10 are for net (stable). * patches 11 and 12 are for net-next (but depends on patches 1 to 10). ** Changelog ** v1 -> v2: https://lore.kernel.org/all/20220712153157.83847-1-mailhol.vincent@wanadoo.fr * Fix typo in patch #10: data[7] of CAN error frames is for the RX error counter, not the TX one (this is litteraly a one byte change). ==================== As discussed take the whole series via can-next -> net-next. Link: https://lore.kernel.org/all/20220719143550.3681-1-mailhol.vincent@wanadoo.frSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Vincent Mailhol authored
Currently, drivers are using magic numbers to derive the CAN error states from the error counter. Add three macro declarations to remediate this. For reference, the error-active, error-passive and bus-off are defined in ISO 11898, section 12.1.4.2 "Error counting". Although ISO 11898 does not define error-warning state, this extra value is also commonly used and is thus also added. Link: https://lore.kernel.org/all/20220719143550.3681-13-mailhol.vincent@wanadoo.frSigned-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by:
-
Vincent Mailhol authored
Add a dedicated flag in uapi/linux/can/error.h to notify the userland that fields data[6] and data[7] of the CAN error frame were respectively populated with the tx and rx error counters. For all driver tree-wide, set up this flags whenever needed. Link: https://lore.kernel.org/all/20220719143550.3681-12-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
Currently, data[5..7] of struct can_frame, when used as a CAN error frame, are defined as being "controller specific". Device specific behaviours are problematic because it prevents someone from writing code which is portable between devices. As a matter of fact, data[5] is never used, data[6] is always used to report TX error counter and data[7] is always used to report RX error counter. can-utils also relies on this. This patch updates the comment in the uapi header to specify that data[5] is reserved (and thus should not be used) and that data[6..7] are used for error counters. Fixes: 0d66548a ("[CAN]: Add PF_CAN core module") Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0024d8ad ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 7259124e ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0738eff1 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Link: https://lore.kernel.org/all/20220719143550.3681-7-mailhol.vincent@wanadoo.fr CC: Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 57e83fb9 ("can: hi311x: Add Holt HI-311x CAN driver") Link: https://lore.kernel.org/all/20220719143550.3681-6-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. alloc_can_err_skb() already sets cf to NULL if the allocation fails [1], so the redundant cf = NULL assignment gets removed. [1] https://elixir.bootlin.com/linux/latest/source/drivers/net/can/dev/skb.c#L187 Fixes: 0a9cdcf0 ("can: slcan: extend the protocol with CAN state info") Link: https://lore.kernel.org/all/20220719143550.3681-5-mailhol.vincent@wanadoo.fr CC: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 215db185 ("can: sja1000: Consolidate and unify state change handling") Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: fd115931 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/20220719143550.3681-3-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0c78ab76 ("pch_can: Add setting TEC/REC statistics processing") Link: https://lore.kernel.org/all/20220719143550.3681-2-mailhol.vincent@wanadoo.frSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2022-07-18 This series contains updates to igc driver only. Kurt Kanzenbach adds support for Qbv schedules where one queue stays open in consecutive entries. Sasha removes an unused define and field. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Remove forced_speed_duplex value igc: Remove MSI-X PBA Clear register igc: Lift TAPRIO schedule restriction ==================== Link: https://lore.kernel.org/r/20220718180109.4114540-1-anthony.l.nguyen@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Davide Caratti authored
the last caller has been removed with commit 96f5e66e ("mac80211: fix aggregation for hardware with ampdu queues"), so it's safe to remove this function. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/r/703d549e3088367651d92a059743f1be848d74b7.1658133689.git.dcaratti@redhat.comSigned-off-by:
-
- 19 Jul, 2022 22 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kuba/linuxJakub Kicinski authored
Pavel Begunkov says: ==================== io_uring zerocopy send The patchset implements io_uring zerocopy send. It works with both registered and normal buffers, mixing is allowed but not recommended. Apart from usual request completions, just as with MSG_ZEROCOPY, io_uring separately notifies the userspace when buffers are freed and can be reused (see API design below), which is delivered into io_uring's Completion Queue. Those "buffer-free" notifications are not necessarily per request, but the userspace has control over it and should explicitly attaching a number of requests to a single notification. The series also adds some internal optimisations when used with registered buffers like removing page referencing. From the kernel networking perspective there are two main changes. The first one is passing ubuf_info into the network layer from io_uring (inside of an in kernel struct msghdr). This allows extra optimisations, e.g. ubuf_info caching on the io_uring side, but also helps to avoid cross-referencing and synchronisation problems. The second part is an optional optimisation removing page referencing for requests with registered buffers. Benchmarking UDP with an optimised version of the selftest (see [1]), which sends a bunch of requests, waits for completions and repeats. "+ flush" column posts one additional "buffer-free" notification per request, and just "zc" doesn't post buffer notifications at all. NIC (requests / second): IO size | non-zc | zc | zc + flush 4000 | 495134 | 606420 (+22%) | 558971 (+12%) 1500 | 551808 | 577116 (+4.5%) | 565803 (+2.5%) 1000 | 584677 | 592088 (+1.2%) | 560885 (-4%) 600 | 596292 | 598550 (+0.4%) | 555366 (-6.7%) dummy (requests / second): IO size | non-zc | zc | zc + flush 8000 | 1299916 | 2396600 (+84%) | 2224219 (+71%) 4000 | 1869230 | 2344146 (+25%) | 2170069 (+16%) 1200 | 2071617 | 2361960 (+14%) | 2203052 (+6%) 600 | 2106794 | 2381527 (+13%) | 2195295 (+4%) Previously it also brought a massive performance speedup compared to the msg_zerocopy tool (see [3]), which is probably not super interesting. There is also an additional bunch of refcounting optimisations that was omitted from the series for simplicity and as they don't change the picture drastically, they will be sent as follow up, as well as flushing optimisations closing the performance gap b/w two last columns. For TCP on localhost (with hacks enabling localhost zerocopy) and including additional overhead for receive: IO size | non-zc | zc 1200 | 4174 | 4148 4096 | 7597 | 11228 Using a real NIC 1200 bytes, zc is worse than non-zc ~5-10%, maybe the omitted optimisations will somewhat help, should look better for 4000, but couldn't test properly because of setup problems. Links: liburing (benchmark + tests): [1] https://github.com/isilence/liburing/tree/zc_v4 kernel repo: [2] https://github.com/isilence/linux/tree/zc_v4 RFC v1: [3] https://lore.kernel.org/io-uring/cover.1638282789.git.asml.silence@gmail.com/ RFC v2: https://lore.kernel.org/io-uring/cover.1640029579.git.asml.silence@gmail.com/ Net patches based: git@github.com:isilence/linux.git zc_v4-net-base or https://github.com/isilence/linux/tree/zc_v4-net-base API design overview: The series introduces an io_uring concept of notifactors. From the userspace perspective it's an entity to which it can bind one or more requests and then requesting to flush it. Flushing a notifier makes it impossible to attach new requests to it, and instructs the notifier to post a completion once all requests attached to it are completed and the kernel doesn't need the buffers anymore. Notifications are stored in notification slots, which should be registered as an array in io_uring. Each slot stores only one notifier at any particular moment. Flushing removes it from the slot and the slot automatically replaces it with a new notifier. All operations with notifiers are done by specifying an index of a slot it's currently in. When registering a notification the userspace specifies a u64 tag for each slot, which will be copied in notification completion entries as cqe::user_data. cqe::res is 0 and cqe::flags is equal to wrap around u32 sequence number counting notifiers of a slot. ==================== Link: https://lore.kernel.org/r/cover.1657643355.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
Teach tcp how to use external ubuf_info provided in msghdr and also prepare it for managed frags by sprinkling skb_zcopy_downgrade_managed() when it could mix managed and not managed frags. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
-
Pavel Begunkov authored
Teach ipv6/udp how to use external ubuf_info provided in msghdr and also prepare it for managed frags by sprinkling skb_zcopy_downgrade_managed() when it could mix managed and not managed frags. Signed-off-by:
-
Pavel Begunkov authored
Teach ipv4/udp how to use external ubuf_info provided in msghdr and also prepare it for managed frags by sprinkling skb_zcopy_downgrade_managed() when it could mix managed and not managed frags. Signed-off-by:
-
Pavel Begunkov authored
Managed pages contain pinned userspace pages and controlled by upper layers, there is no need in tracking skb->pfmemalloc for them. Introduce a helper for filling frags but ignoring page tracking, it'll be needed later. Signed-off-by:
-
Pavel Begunkov authored
Some users like io_uring can do page pinning more efficiently, so we want a way to delegate referencing to other subsystems. For that add a new flag called SKBFL_MANAGED_FRAG_REFS. When set, skb doesn't hold page references and upper layers are responsivle to managing page lifetime. It's allowed to convert skbs from managed to normal by calling skb_zcopy_downgrade_managed(). The function will take all needed page references and clear the flag. It's needed, for instance, to avoid mixing managed modes. Signed-off-by:
-
David Ahern authored
Add support for custom iov_iter handling to msghdr. The idea is that in-kernel subsystems want control over how an SG is split. Signed-off-by:
David Ahern <dsahern@kernel.org> [pavel: move callback into msghdr] Signed-off-by:
-
Pavel Begunkov authored
Make possible for network in-kernel callers like io_uring to pass in a custom ubuf_info by setting it in a new field of struct msghdr. Signed-off-by:
-
Edward Cree authored
Link: https://lore.kernel.org/r/cover.1657878101.git.ecree.xilinx@gmail.comSigned-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Marc Kleine-Budde authored
Stephane Grosjean contributes a peak-usb cleanup and update series. Signed-off-by: -
Stephane Grosjean authored
The CANFD-USB PCAN-USB FD interface undergoes an internal component change that requires a slight modification of its drivers, which leads them to dynamically use endpoint numbers provided by the interface itself. In addition to a change in the calls to the USB functions exported by the kernel, the detection of the USB interface dedicated to CAN must also be modified, as some PEAK-System devices support other interfaces than CAN. Link: https://lore.kernel.org/all/20220719120632.26774-3-s.grosjean@peak-system.comSigned-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> [mkl: add missing cpu_to_le16() conversion] [mkl: fix networking block comment style] Signed-off-by:
-
Stephane Grosjean authored
The data structure returned from the USB device contains a number flashed by the user and not the serial number of the device. Link: https://lore.kernel.org/all/20220719120632.26774-2-s.grosjean@peak-system.comSigned-off-by:
-
Stephane Grosjean authored
Mark the input prompt and data pointer as const. Link: https://lore.kernel.org/all/20220719120632.26774-1-s.grosjean@peak-system.comSigned-off-by:
-
Pavel Pisa authored
The update is compatible/pure extension of 2.x IP core version - new option for 2, 4, or 8 Tx buffers option during synthesis. The 2.x version has fixed 4 Tx buffers. 3.x version default is 4 as well - new REG_TX_COMMAND_TXT_BUFFER_COUNT provides synthesis choice. When read as 0 assume 2.x core with fixed 4 Tx buffers. - new REG_ERR_CAPT_TS_BITS field to provide most significant active/implemented timestamp bit. For 2.x read as zero, assume value 63 is such case for 64 bit counter. - new REG_MODE_RXBAM bit which controls automatic advance to next word after Rx FIFO register read. Bit is set to 1 by default after the core reset (REG_MODE_RST) and value 1 has to be preserved for the normal ctucanfd Linux driver operation. Even preceding driver version resets core and then modifies only known/required MODE register bits so backward and forward compatibility is ensured. See complete datasheet for time-triggered and other updated capabilities http://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf The fields related to ongoing Ondrej Ille's work on fault tolerant version with parity protected buffers and FIFOs are not included for now. Their inclusion will be considered when design is settled and tested. Link: https://lore.kernel.org/all/14a98ed1829121f0f3bde784f1aa533bc3cc7fe0.1658139843.git.pisa@cmp.felk.cvut.czSigned-off-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by:
-
Dario Binacchi authored
The comment referred to a status (warning) other than the one that was being managed (active error). Link: https://lore.kernel.org/all/20220716170112.2020291-1-dario.binacchi@amarulasolutions.comSigned-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by:
-
Dario Binacchi authored
We can't call close_candev() with a spin lock held, so release the lock before calling it. After calling close_candev(), we can update the fields of the private `struct can_priv' without having to acquire the lock. Fixes: c4e54b06 ("can: slcan: use CAN network device driver API") Link: https://lore.kernel.org/linux-kernel/Ysrf1Yc5DaRGN1WE@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/all/20220715072951.859586-1-dario.binacchi@amarulasolutions.comReported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
-
Marc Kleine-Budde authored
Biju Das says: ==================== Add support for RZ/N1 SJA1000 CAN controller This patch series aims to add support for RZ/N1 SJA1000 CAN controller. The SJA1000 CAN controller on RZ/N1 SoC has some differences compared to others like it has no clock divider register (CDR) support and it has no HW loopback (HW doesn't see tx messages on rx), so introduced a new compatible 'renesas,rzn1-sja1000' to handle these differences. v3->v4: * Updated bindings as per coding style used in example-schema. * Entire entry in properties compatible declared as enum. Also Descriptions do not bring any information,so removed it from compatible description. * Used decimal values in nxp,tx-output-mode enums. * Fixed indentaions in binding examples. * Removed clock-names from bindings, as it is single clock. * Optimized the code as per Vincent's suggestion. * Updated clock handling as per bindings. v2->v3: * Added reg-io-width is a required property for technologic,sja1000 & renesas,rzn1-sja1000 * Removed enum type from nxp,tx-output-config and updated the description for combination of TX0 and TX1. * Updated the example for technologic,sja1000 v1->v2: * Moved $ref: can-controller.yaml# to top along with if conditional to avoid multiple mapping issues with the if conditional in the subsequent patch. * Added an example for RZ/N1D SJA1000 usage. * Updated commit description for patch#2,#3 and #6 * Removed the quirk macro SJA1000_NO_HW_LOOPBACK_QUIRK * Added prefix SJA1000_QUIRK_* for quirk macro. * Replaced of_device_get_match_data->device_get_match_data. * Added error handling on clk error path * Started using "devm_clk_get_optional_enabled" for clk get,prepare and enable. Ref: [1] https://lore.kernel.org/linux-renesas-soc/20220701162320.102165-1-biju.das.jz@bp.renesas.com/T/#t ==================== Link: https://lore.kernel.org/all/20220710115248.190280-1-biju.das.jz@bp.renesas.com [mkl: applying patches 1...5 only, as 6 depends devm_clk_get_optional_enabled(), which is not in net-next/master, yet] Signed-off-by:
-
Biju Das authored
Change the return type as void for SoC specific init function as it always return 0. Link: https://lore.kernel.org/all/20220710115248.190280-6-biju.das.jz@bp.renesas.comSigned-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by:
-
Biju Das authored
This patch replaces of_match_device->device_get_match_data to get pointer to device data. Link: https://lore.kernel.org/all/20220710115248.190280-5-biju.das.jz@bp.renesas.comSigned-off-by:
-
Biju Das authored
As per Chapter 6.5.16 of the RZ/N1 Peripheral Manual, The SJA1000 CAN controller does not support Clock Divider Register compared to the reference Philips SJA1000 device. This patch adds a device quirk to handle this difference. Link: https://lore.kernel.org/all/20220710115248.190280-4-biju.das.jz@bp.renesas.comSigned-off-by:
-
Biju Das authored
Add CAN binding documentation for Renesas RZ/N1 SoC. The SJA1000 CAN controller on RZ/N1 SoC has some differences compared to others like it has no clock divider register (CDR) support and it has no HW loopback (HW doesn't see tx messages on rx), so introduced a new compatible 'renesas,rzn1-sja1000' to handle these differences. Link: https://lore.kernel.org/all/20220710115248.190280-3-biju.das.jz@bp.renesas.comSigned-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Biju Das authored
Convert the NXP SJA1000 CAN Controller Device Tree binding documentation to json-schema. Update the example to match reality. Link: https://lore.kernel.org/all/20220710115248.190280-2-biju.das.jz@bp.renesas.comSigned-off-by:
-
