Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.14, round 1

Highlights:
-----------

MCU part:
 - Fixes for Yaml verifications

MPU part:
 - Configure qspi's mdma transfer to block for stm32mp151

 - ST boards:
  - Fixes for yaml verifications

 - DH boards:
  - Fixes for yaml verifications
  - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.

 - Odyssey boards:
  - fix Sd card detectection (gpio line updated)
  - fix eMMC VQMMC suuply (use vdd instead of v3v3)

* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: fix stpmic node for stm32mp1 boards
  ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
  ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
  ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
  ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
  ARM: dts: stm32: add a new DCMI pins group on stm32mp15
  ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
  dt-bindings: net: document ptp_ref clk in dwmac
  ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
  ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
  ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
  ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
  ARM: dts: stm32: fix RCC node name on stm32f429 MCU
  ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
  ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
  ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
  ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
  ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
  ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM

Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.14

1. Several cleanups and alignment with dtschema.  This includes removal
   of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
   example from Suspend to RAM where the PMIC RTC's power is still
   supplied).
3. Disable unused/not implemented camera on GT-I9100.

* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Disable unused camera input for I9100
  ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
  ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
  ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
  ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
  ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
  ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
  ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
  ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
  ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
  ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
  ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
  ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
  ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
  ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
  ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
  ARM: dts: exynos: align Broadcom WiFi with dtschema

Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.14

 - IBM Rainier and Everest LED descriptions. These systems have a large
   number of LEDs attached via expanders.

 - Ampere Mt Jade updates, as OpenBMC bringup continues for this
   machine.

 - Updated 64MB flash layout for systems using OpenBMC on NOR root file
   systems.

 - Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
   so a new device tree is added to support A0 and A1.

 - Update all command lines for early serial output.

* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: everest: Add pcie cable card indicator leds
  ARM: dts: aspeed: everest: Add vrm and other indicator leds
  ARM: dts: aspeed: everest: Add dimm indicator leds
  ARM: dts: aspeed: everest: Add pcie slot indicator leds
  ARM: dts: aspeed: everest: Add nvme and fan indicator leds
  ARM: dts: aspeed: everest: Add system level indicator leds
  ARM: dts: aspeed-g5: Add SCU phandle to GFX node
  ARM: dts: aspeed: Everest: Add directly controlled LEDs
  ARM: dts: aspeed: Rainier 4U: Remove fan updates
  ARM: dts: aspeed: Everest: Fix cable card PCA chips
  ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
  ARM: dts: aspeed: mtjade: switch to 64MB flash layout
  ARM: dts: aspeed: mtjade: Add PSU support
  ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
  ARM: dts: aspeed: Set earlycon boot argument
  ARM: dts: aspeed-g6: Add pinctrl settings
  ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
  ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
  ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.

Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Add the crypto engine as a child of the NPE.

Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM64 DT changed for v5.14:
- set 128bytes FIFO size on uart A
- add Banana PI BPI-M5 board dts & bindings
- meson-sm1: add toacodec node to use internal audio DAC
- enable hdmi audio loopback on VIM3 board

* tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: meson: set 128bytes FIFO size on uart A
  arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts
  dt-bindings: arm: amlogic: add Banana PI M5 bindings
  arm64: dts: meson-sm1: add toacodec node
  arm64: dts: meson: vim3: enable hdmi audio loopback

Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for v5.14 merge window

Mostly just clean-up for device tree binding checks with
few other clean-up patches:

- Drop ov5640 sensor for dra76-evm, it's just one of the
  optional additional sensors and makes hard to use any of
  the other options, TI is using the devicetree overlay
  snippets for these

- Group the phandles in osd3358-sm-red to make the files
  more readable

- A series of gpio clean-up patches to follow the binding
  documentation

- Move ti,no-reset related properties to the target module
  level, the ti-sysc driver handles them also in the child
  but they really belong to the target module

- Drop the unnecessary uart compatible entries to make the
  binding check to work

- Mailbox related updates to make the binding check to
  work

* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
  ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
  ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
  ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
  ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
  ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
  ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
  ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  ARM: dts: omap3: align gpio hog names with dt-schema
  ARM: dts: am437x: align gpio hog names with dt-schema
  ARM: dts: am335x: align GPIO hog names with dt-schema
  ARM: dts: osd3358-sm-red: group in the same phandle all its properties
  ARM: dts: dra76-evm: remove ov5640

Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.14

  - GPIO extender support for the Falcon development board,
  - Switches support for the ALT development board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: alt: Add SW2 as GPIO keys
  ARM: dts: renesas: Move enable-method to CPU nodes
  arm64: dts: renesas: beacon: Fix USB ref clock references
  arm64: dts: renesas: beacon: Fix USB extal reference
  ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
  arm64: dts: renesas: eagle: Add x1 clock
  ARM: dts: koelsch: Rename sw2 to keyboard
  ARM: dts: r8a7779, marzen: Fix DU clock names
  arm64: dts: renesas: v3msk: Fix memory size
  arm64: dts: renesas: condor: Switch eMMC bus to 1V8
  arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
  arm64: dts: renesas: beacon kit: Setup AVB refclk
  arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
  ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list

Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
  for the v5.14 merge window

* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: gemini: remove xxx-cells from display
  ARM: dts: gemini-dlink-dir-685: Remove address from display port
  ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
  ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
  ARM: dts: gemini: convert obsolete SPI properties
  ARM: dts: gemini: use the right rtc compatible
  ARM: dts: gemini: add device_type on pci
  ARM: dts: gemini-rut1xx: remove duplicate ethernet node
  ARM: dts: gemini: rename mdio to the right name
  MAINTAINERS: gemini: add missing dts pattern

Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS

* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Fix up the IXP4xx ethernet nodes
  ARM: dts: ixp4xx: Add beeper to the NSLU2
  ARM: dts: ixp4xx: Create a proper expansion bus
  ARM: dts: ixp4xx: Add PCI hosts
  ARM: dts: ixp4xx: Add ethernet

Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

This patch adds devicetree for intel-ixp42x-welltech-epbx100.

Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.comSigned-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Adds welltech,epbx100 as a valid intel-ixp4xx board.

Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.comSigned-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add vendor prefix for Welltech computer Co Ld.

Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.comSigned-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:

-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Fix the following dtbs_check warning:
spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Fix the following dtbs_check warning:
eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Fix the following dtbs_check warning:
touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC
supply set to v3v3 (buck4), the same as the VMMC supply. That was
incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3)
instead.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI
interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was
incompatible with the pins used on the Odyssey board, where:
- there are 8 data pins instead of 12,
- DCMI_HSYNC is available at PA4 instead of PH8,
- DCMI_D0 is at PC6 instead of PH9,
- DCMI_D3 is at PE1 instead of PH12,
- DCMI_D4 is at PE11 instead of PH14,
- DCMI_D5 is at PD3 instead of PI4,
- DCMI_D6 is at PE13 instead of PB8,
- DCMI_D7 is at PB9 instead of PE6.

Add the DCMI pins used on the Odyssey board as a new DCMI pin state
definition, dcmi-1, AKA phandle dcmi_pins_b.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

It prevents the following warning:

 pin-controller@50002000: 'ltdc' does not match any of the regexes:
'-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+'
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

ptp_ref clk has been added in DT but not documented which makes yaml
validation failed:

ethernet@5800a000: clocks: [[6, 105], [6, 103], [6, 104], [6, 123],
[6, 169], [6, 112]] is too long
ethernet@5800a000: clock-names: ['stmmaceth', 'mac-clk-tx', 'mac-clk-rx',
'eth-ck', 'ptp_ref', 'ethstp'] is too long
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

It fixes the following warning seen running "make dtbs_check W=1"

Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Replace upper case by lower case in i2c nodes name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Update node name to avoid a DT schema validation issue seen with
"make dtbs_check W=1". It also cleans picntrl dtsi files for f429/f469 MCU.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

These are leds on the IBM proprietary PCIE cards called cable cards.
Cable cards have 2 ports on them and each port has an indicator led.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au

This commit adds indicator leds for vrms, processors, opencapi
connectors, tpm, planar, power distribution card and dasd
backplane and are driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-6-joel@jms.id.au

These are dimm indicator leds driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-5-joel@jms.id.au

These are pcie slot indicator leds driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-4-joel@jms.id.au

These are the indicator leds for nvme slots and fans and are
driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-3-joel@jms.id.au

These are the system level indicator leds that are driven by
PCA9551 connected to the Operator Panel.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-2-joel@jms.id.au

In v5.13 the DRM driver gained support for using a phandle to the SCU,
instead of matching on the scu compatible.

Link: https://lore.kernel.org/r/20210603064536.165297-1-joel@jms.id.auSigned-off-by: Joel Stanley <joel@jms.id.au>

These LEDs are directly connected to the BMC's GPIO bank
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

The 4U fans do not need a different "tach-pulses" property than the 2U
machine. In addition, the "maxim,fan-dual-tach" property does not exist
upstream yet, so it should also be removed.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Correct two PCA chips which were placed on the wrong I2C bus and
address.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Santosh Puranik <santosh.puranik@in.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>

Aspeed AST2600 u-boot requires 600KiB+ flash space. Sharing the same
openbmc-flash-layout-64.dtsi requires to resize the flash partition.

The updated flash layout as follows:
- u-boot: 896 KiB
- u-boot-env: 128 KiB
- kernel: 9MiB
- rofs: 32 MiB
- rwfs: 22 MiB
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210316085932.2601-1-troy_lee@aspeedtech.comSigned-off-by: Joel Stanley <joel@jms.id.au>

As the 32MB flash layout will soon be exhausted, switch to 64MB layout.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-4-quan@os.amperecomputing.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Enable PSU support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-3-quan@os.amperecomputing.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Enable OCP card support on Ampere's Mt. Jade BMC.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-2-quan@os.amperecomputing.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Most of the aspeed boards have copied the 'earlyprink' string in
the bootargs. However, there's no earlyprink driver configured in the
defconfigs, so this does nothing.

A combination of setting stdout in the chosen node and adding earlycon
to bootargs causes early serial output to appear early. This changes all
boards to use this option.

The console=ttyS4,115200 option is still required, as this is used by
the run time uart driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Alexander Filippov <a.filippov@yadro.com>
Link: https://lore.kernel.org/r/20210526051220.136432-1-joel@jms.id.auSigned-off-by: Joel Stanley <joel@jms.id.au>

AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces.
Currently, only SGPIO master 1 and SGPIO slve 1 in the pinctrl dtsi.
SGPIO master 2 and slave 2 should be added in pinctrl dtsi as well.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-3-steven_lee@aspeedtech.comSigned-off-by: Joel Stanley <joel@jms.id.au>

Prevent warning seen with "make dtbs_check W=1" command:

Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>