- 29 Dec, 2004 6 commits
-
-
Tony Lindgren authored
Patch from Tony Lindgren Updates processor specific Kconfig options for OMAP Signed-off-by: Tony Lindgren Signed-off-by: Russell King
-
Tony Lindgren authored
Patch from Tony Lindgren ARM Kconfig updates for OMAP leds Signed-off-by: Tony Lindgren Signed-off-by: Russell King
-
Deepak Saxena authored
Patch from Deepak Saxena This patch fixes two issues with the IXP2000 timer implementation: - We currently to not account for lost timer interrupts - We currently do not check for rollover within gettimeoffset() Signed-off-by: Deepak Saxena Signed-off-by: Russell King
-
Deepak Saxena authored
Patch from Deepak Saxena On IXDP2801 we need to write a magic sequence to the CPLD to ensure a full system reset instead of just CPU reset. Also cleanup some comments and copyrights while we are in here. Signed-off-by: Deepak Saxena Signed-off-by: Russell King
-
George G. Davis authored
Patch from George G. Davis Convert ARM proc files to use manifest constants defined in pgtable.h and domain.h. This is a prelude to allow renumbering domains. The domain renumbering is required to implement support for ARMv6 MMU super sections where domain 0 is implied. Although this is technically only required for ARMv6, it seemed reasonable to clean up all proc files while here. I did a test build with and without this patch applied and confirmed that all proc file binaries are unchanged when this patch is applied. Signed-off-by: George G. Davis Signed-off-by: Russell King
-
Tony Lindgren authored
Patch from Tony Lindgren This patch syncs the mainline kernel with the linux-omap tree. The patch mostly contains minor fixes and extra register definitions by various OMAP developers. Signed-off-by: Tony Lindgren Signed-off-by: Russell King
-
- 27 Dec, 2004 22 commits
-
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David Vrabel authored
Patch from David Vrabel Expand the IXP4XX_WATCHDOG (IXP4xx internal watchdog) config option help text with a note about its ineffectiveness. Signed-off-by: David Vrabel Signed-off-by: Russell King
-
Catalin Marinas authored
Patch from Catalin Marinas This patch enables the ARM922T configuration option for the Integrator platforms (there is an Excalibur core module available). Signed-off-by: Catalin Marinas Signed-off-by: Russell King
-
Deepak Saxena authored
Patch from Deepak Saxena This patch borrows from the uclinux source where they have moved the per-platform code for get_irqnr_and_base, disable_fiq, and irq_prio_table out of entry-armv.S. However, instead of putting the macros in arch/arm/mach-$(MACHINE)/entry-header.S, we just have it in the machine's incdir. This means we don't need the extra complexity of creating symlink at build time. The patch also removes the irq_prio_table as a requirement for all machines and makes it specific to IOC/IOMD machines. This patch drastically shrinks entry-armv.S and allows us to delete and add machines without having to touch generic code (there were two dead machines laying around in entry-armv.S). Tested on IXP4xx and test-built for just about every defconfig. Signed-off-by: Deepak Saxena Signed-off-by: Russell King
-
bk://gkernel.bkbits.net/libata-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Stefan Knoblich authored
-
Jeff Garzik authored
into pobox.com:/garz/repo/libata-2.6
-
Albert Lee authored
After some testing, it seems that some PATA host adapter (ex. pdc20275) cannot work reliably with specific request buffer sizes under ATAPI DMA mode. Detailed test result: 4096, 2048, 1024, 512, 256: OK 384, 257, 255, 128, 96, 64, 32: failed (irq lost) It seems multiple of 256 bytes are the safe ATAPI DMA buffer sizes to use. Attached please find the patch to fix the pdc2027x ATAPI DMA problem. Changes: 1. Add a callback function "check_atapi_dma()" to ata_port_operations such that libata core can ask the driver: "Can this command be processed in ATAPI DMA mode safely? " when the the command is received. 2. ATAPI DMA is off by default if the callback function is not provided by the driver If the callback function is not provided by the driver, the ATAPI DMA should be as is. The ATAPI DMA is already controlled by dev->flags. BTW, the patch isolates the ATAPI DMA workaround to the pdc20275 driver itself, not impacting libata core . Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
-
Albert Lee authored
Tested burning CD-RW with libata-dev-2.6 and cdrecord: 1. ATAPI DMA mode - tested OK 2. ATAPI PIO mode - test failed when cdrecord finishes burning and issues MODE_SELECT to the device. After checking the log, it showed that MODE_SELECT caused ata_pio_complete() to return error. However, the error is not handled by ata_pio_task(). Attached please find the patch for ata_pio_task() error handling for your review. (The patch is against the libata-dev-2.6 tree. ) Changes in the patch: 1. End the PIO task when PIO_ST_IDLE state is entered 2. End the PIO task after PIO_ST_TMOUT and PIO_ST_ERR state handled by ata_pio_error() 3. Remove the first "if" statement to handle the error condition returned from ata_pio_block(), ata_pio_complete() and ata_pio_poll(). Change #2 is not so necessary since ata_pio_error() will put the cmd to PIO_ST_IDLE state after the error condition is handled. The change just saves a function call to queue_work(). Tested OK on on my machine with pdc20275 and ASUS CD-RW drive. Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
-
Albert Lee authored
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
-
bk://gkernel.bkbits.net/misc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Adrian Bunk authored
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
James Nelson authored
Clean up in drivers/char/hw_random.c: Make debug #defines a little easier to understand. Small whitespace cleanup. Change some printk()'s into pr_info()'s. Add KERN_ constant to debug printk(). Signed-off-by: James Nelson <james4765@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Jeff Garzik authored
-
bk://linux-acpi.bkbits.net/26-latest-releaseLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://linux-scsi.bkbits.net/scsi-for-linus-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
James Bottomley authored
CC [M] drivers/scsi/scsi_transport_fc.o drivers/scsi/scsi_transport_fc.c: In function `fc_stat_show': drivers/scsi/scsi_transport_fc.c:634: warning: long long unsigned int format, long unsigned int arg (arg 4) To us %llx on a 64 bit platform we have to cast u64 to unsigned long long. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
James Bottomley authored
From: James.Smart@Emulex.Com This patch updates the fc_transport with attributes for local FC ports (e.g. Hosts). The port attributes are defined per HBAAPI v2.0 definitions. This patch results in the following in /sys/class: ----------------------------------------------------- [jsmart@elxware class]$ cd /sys/class [jsmart@elxware class]$ ls fc_host graphics misc pci_bus scsi_host usb_host fc_transport input net scsi_device tty vc firmware mem netlink scsi_generic usb [jsmart@elxware class]$ cd fc_host [jsmart@elxware fc_host]$ ls host4 [jsmart@elxware fc_host]$ cd host4 [jsmart@elxware host4]$ ls device host_port_maxframe_size host_port_supported_speeds host_fabric_name host_port_name host_port_symbolic_name host_link_down_tmo host_port_speed host_port_type host_node_name host_port_state host_tgtid_bind_type host_port_active_fc4s host_port_supported_classes statistics host_port_id host_port_supported_fc4s [jsmart@elxware host4]$ ls -ld * lrwxrwxrwx 1 root root 0 Oct 13 18:24 device -> ../../../devices/platform/host4 -r--r--r-- 1 root root 4096 Oct 13 18:24 host_fabric_name -rw-r--r-- 1 root root 4096 Oct 13 18:24 host_link_down_tmo -r--r--r-- 1 root root 4096 Oct 13 18:24 host_node_name -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_active_fc4s -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_id -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_maxframe_size -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_name -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_speed -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_state -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_classes -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_fc4s -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_supported_speeds -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_symbolic_name -r--r--r-- 1 root root 4096 Oct 13 18:24 host_port_type -rw-r--r-- 1 root root 4096 Oct 13 18:24 host_tgtid_bind_type drwxr-xr-x 2 root root 0 Oct 13 18:24 statistics Using the following script (/tmp/show_attributes): #!/bin/sh FILES=`ls *` for file in $FILES; do if [ -f $file ] ; then echo "$file : " `cat $file` fi done Here's a sample of querying the attributes: [jsmart@elxware /]$ cd /sys/class/fc_host/host4 [jsmart@elxware host4]$ /tmp/show_attributes host_fabric_name : 0x33334444ffeeddcc host_link_down_tmo : 30 host_node_name : 0x78563412aabbccdd host_port_active_fc4s : hex: 40 41 42 43 44 45 46 47 48 49 4a 4b 4c 4d 4e 4f 50 51 52 53 54 55 56 57 58 59 5a 5b 5c 5d 5e 5f host_port_id : 0x789abc host_port_maxframe_size : 2511 bytes host_port_name : 0xefcdab9011223344 host_port_speed : 2 Gbit host_port_state : Online host_port_supported_classes : Class 2, Class 3 host_port_supported_fc4s : hex: 80 81 82 83 84 85 86 87 88 89 8a 8b 8c 8d 8e 8f 90 91 92 93 94 95 96 97 98 99 9a 9b 9c 9d 9e 9f host_port_supported_speeds : 2 Gbit, 4 Gbit, 10 Gbit host_port_symbolic_name : LP9052 Dual Port Adapter host_port_type : NPort (fabric via point-to-point) host_tgtid_bind_type : wwpn (World Wide Port Name) Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Dave Boutcher authored
Description: Use msleep() instead of schedule_timeout() to guarantee the task delays as expected. Originally submitted to linux-scsi by the janitors, and resubmitted by boutcher (after testing :-) Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Dave Boutcher <boutcher@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
-
Arjan van de Ven authored
the ibm_acpi.c driver references acpi_ibm_exit() from it's __init function, which means the exit function isn't allowed to be __exit since __exit functions are not part of vmlinux while __init functions are. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
bk://linux-voyager.bkbits.net/mca-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Linus Torvalds authored
They were already there, properly sorted too.
-
- 26 Dec, 2004 12 commits
-
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Jeff Garzik authored
into pobox.com:/garz/repo/net-drivers-2.6
-
Alan Cox authored
Originally submitted by Mike Waychison <Michael.Waychison@sun.com> in August but apparently lost. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
SCSI ioctls can ask for a lot of memory and fail. We don't need to vomit in the log file for this case. Again taken from the Red Hat minor patches applied for FC3. Original-patch: Arjan van de Ven <arjanv@redhat.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Paul Laufer informed the list that he had changed address and his change of address had been ignored so CREDITS was still wrong although other files had been updated. Fix this. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Red Hat got some confused customers due to this message. The confused user case is when they update the BIOS and all of a sudden we have "no suitable data" yet we did before. We (Arjan van de Ven) thus changed it to "No new microcode" which is much much clearer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Alan Cox authored
Add some more funky AC97 knowledge to the intel8x0 driver. These come from Red Hat and its partners and are included in our shipping code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-