- 22 May, 2018 29 commits
-
-
Hendrik Brueckner authored
commit 4bbaf258 upstream. Correct a trinity finding for the perf_event_open() system call with a perf event attribute structure that uses a frequency but has the sampling frequency set to zero. This causes a FP divide exception during the sample rate initialization for the hardware sampling facility. Fixes: 8c069ff4 ("s390/perf: add support for the CPU-Measurement Sampling Facility") Cc: stable@vger.kernel.org # 3.14+ Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Julian Wiedmann authored
commit e5218134 upstream. Ever since CQ/QAOB support was added, calling qdio_free() straight after qdio_alloc() results in qdio_release_memory() accessing uninitialized memory (ie. q->u.out.use_cq and q->u.out.aobs). Followed by a kmem_cache_free() on the random AOB addresses. For older kernels that don't have 6e30c549, the same applies if qdio_establish() fails in the DEV_STATE_ONLINE check. While initializing q->u.out.use_cq would be enough to fix this particular bug, the more future-proof change is to just zero-alloc the whole struct. Fixes: 104ea556 ("qdio: support asynchronous delivery of storage blocks") Cc: <stable@vger.kernel.org> #v3.2+ Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Michel Thierry authored
commit b579f924 upstream. Factor in clear values wherever required while updating destination min/max. References: HSDES#1604444184 Signed-off-by:
Michel Thierry <michel.thierry@intel.com> Cc: mesa-dev@lists.freedesktop.org Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com Cc: stable@vger.kernel.org Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180514165445.9198-1-michel.thierry@intel.com (backported from commit 0c79f9cb) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Pavel Tatashin authored
commit ab1e8d89 upstream. It is unsafe to do virtual to physical translations before mm_init() is called if struct page is needed in order to determine the memory section number (see SECTION_IN_PAGE_FLAGS). This is because only in mm_init() we initialize struct pages for all the allocated memory when deferred struct pages are used. My recent fix in commit c9e97a19 ("mm: initialize pages on demand during boot") exposed this problem, because it greatly reduced number of pages that are initialized before mm_init(), but the problem existed even before my fix, as Fengguang Wu found. Below is a more detailed explanation of the problem. We initialize struct pages in four places: 1. Early in boot a small set of struct pages is initialized to fill the first section, and lower zones. 2. During mm_init() we initialize "struct pages" for all the memory that is allocated, i.e reserved in memblock. 3. Using on-demand logic when pages are allocated after mm_init call (when memblock is finished) 4. After smp_init() when the rest free deferred pages are initialized. The problem occurs if we try to do va to phys translation of a memory between steps 1 and 2. Because we have not yet initialized struct pages for all the reserved pages, it is inherently unsafe to do va to phys if the translation itself requires access of "struct page" as in case of this combination: CONFIG_SPARSE && !CONFIG_SPARSE_VMEMMAP The following path exposes the problem: start_kernel() trap_init() setup_cpu_entry_areas() setup_cpu_entry_area(cpu) get_cpu_gdt_paddr(cpu) per_cpu_ptr_to_phys(addr) pcpu_addr_to_page(addr) virt_to_page(addr) pfn_to_page(__pa(addr) >> PAGE_SHIFT) We disable this path by not allowing NEED_PER_CPU_KM with deferred struct pages feature. The problems are discussed in these threads: http://lkml.kernel.org/r/20180418135300.inazvpxjxowogyge@wfg-t540p.sh.intel.com http://lkml.kernel.org/r/20180419013128.iurzouiqxvcnpbvz@wfg-t540p.sh.intel.com http://lkml.kernel.org/r/20180426202619.2768-1-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180515175124.1770-1-pasha.tatashin@oracle.com Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Steven Sistare <steven.sistare@oracle.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Dennis Zhou <dennisszhou@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ross Zwisler authored
commit 9f418224 upstream. Fix a race in the multi-order iteration code which causes the kernel to hit a GP fault. This was first seen with a production v4.15 based kernel (4.15.6-300.fc27.x86_64) utilizing a DAX workload which used order 9 PMD DAX entries. The race has to do with how we tear down multi-order sibling entries when we are removing an item from the tree. Remember for example that an order 2 entry looks like this: struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] where 'entry' is in some slot in the struct radix_tree_node, and the three slots following 'entry' contain sibling pointers which point back to 'entry.' When we delete 'entry' from the tree, we call : radix_tree_delete() radix_tree_delete_item() __radix_tree_delete() replace_slot() replace_slot() first removes the siblings in order from the first to the last, then at then replaces 'entry' with NULL. This means that for a brief period of time we end up with one or more of the siblings removed, so: struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] This causes an issue if you have a reader iterating over the slots in the tree via radix_tree_for_each_slot() while only under rcu_read_lock()/rcu_read_unlock() protection. This is a common case in mm/filemap.c. The issue is that when __radix_tree_next_slot() => skip_siblings() tries to skip over the sibling entries in the slots, it currently does so with an exact match on the slot directly preceding our current slot. Normally this works: V preceding slot struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling] ^ current slot This lets you find the first sibling, and you skip them all in order. But in the case where one of the siblings is NULL, that slot is skipped and then our sibling detection is interrupted: V preceding slot struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling] ^ current slot This means that the sibling pointers aren't recognized since they point all the way back to 'entry', so we think that they are normal internal radix tree pointers. This causes us to think we need to walk down to a struct radix_tree_node starting at the address of 'entry'. In a real running kernel this will crash the thread with a GP fault when you try and dereference the slots in your broken node starting at 'entry'. We fix this race by fixing the way that skip_siblings() detects sibling nodes. Instead of testing against the preceding slot we instead look for siblings via is_sibling_entry() which compares against the position of the struct radix_tree_node.slots[] array. This ensures that sibling entries are properly identified, even if they are no longer contiguous with the 'entry' they point to. Link: http://lkml.kernel.org/r/20180503192430.7582-6-ross.zwisler@linux.intel.com Fixes: 148deab2 ("radix-tree: improve multiorder iterators") Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by:
CR, Sapthagirish <sapthagirish.cr@intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <david@fromorbit.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Matthew Wilcox authored
commit 1e3054b9 upstream. I had neglected to increment the error counter when the tests failed, which made the tests noisy when they fail, but not actually return an error code. Link: http://lkml.kernel.org/r/20180509114328.9887-1-mpe@ellerman.id.au Fixes: 3cc78125 ("lib/test_bitmap.c: add optimisation tests") Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reported-by:
Kees Cook <keescook@chromium.org> Cc: Yury Norov <ynorov@caviumnetworks.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by:
-
Haneen Mohammed authored
commit 7f6df440 upstream. This patch matches the sysfs name used in the unlinking with the linking function. Otherwise, remove_compat_control_link() fails to remove sysfs created by create_compat_control_link() in drm_dev_register(). Fixes: 6449b088 ("drm: Add fake controlD* symlinks for backwards compat") Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> [seanpaul added Fixes and Cc tags] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180511041542.GA4253@haneen-vbSigned-off-by:
-
Nicholas Piggin authored
commit c1d2a313 upstream. Similarly to opal_event_shutdown, opal_nvram_write can be called in the crash path with irqs disabled. Special case the delay to avoid sleeping in invalid context. Fixes: 3b807033 ("powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops") Cc: stable@vger.kernel.org # v3.2 Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Alexander Monakov authored
commit 06cb616b upstream. Not all revisions of DW I2C controller implement the enable status register. On platforms where that's the case (e.g. BG2CD and SPEAr ARM SoCs), waiting for enable will time out as reading the unimplemented register yields zero. It was observed that reading the IC_ENABLE_STATUS register once suffices to avoid getting it stuck on Bay Trail hardware, so replace polling with one dummy read of the register. Fixes: fba4adbb ("i2c: designware: must wait for enable") Signed-off-by:
Alexander Monakov <amonakov@ispras.ru> Tested-by:
Ben Gardner <gardner.ben@gmail.com> Acked-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
commit 32c1733f upstream. skb_header_pointer will copy data into a buffer if data is non linear, otherwise it will return a pointer in the linear section of the data. nf_sk_lookup_slow_v{4,6} always copies data of size udphdr but later accesses memory within the size of tcphdr (th->doff) in case of TCP packets. This causes a crash when running with KASAN with the following call stack - BUG: KASAN: stack-out-of-bounds in xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178 Read of size 2 at addr ffffffe3d417a87c by task syz-executor/28971 CPU: 2 PID: 28971 Comm: syz-executor Tainted: G B W O 4.9.65+ #1 Call trace: [<ffffff9467e8d390>] dump_backtrace+0x0/0x428 arch/arm64/kernel/traps.c:76 [<ffffff9467e8d7e0>] show_stack+0x28/0x38 arch/arm64/kernel/traps.c:226 [<ffffff946842d9b8>] __dump_stack lib/dump_stack.c:15 [inline] [<ffffff946842d9b8>] dump_stack+0xd4/0x124 lib/dump_stack.c:51 [<ffffff946811d4b0>] print_address_description+0x68/0x258 mm/kasan/report.c:248 [<ffffff946811d8c8>] kasan_report_error mm/kasan/report.c:347 [inline] [<ffffff946811d8c8>] kasan_report.part.2+0x228/0x2f0 mm/kasan/report.c:371 [<ffffff946811df44>] kasan_report+0x5c/0x70 mm/kasan/report.c:372 [<ffffff946811bebc>] check_memory_region_inline mm/kasan/kasan.c:308 [inline] [<ffffff946811bebc>] __asan_load2+0x84/0x98 mm/kasan/kasan.c:739 [<ffffff94694d6f04>] __tcp_hdrlen include/linux/tcp.h:35 [inline] [<ffffff94694d6f04>] xt_socket_lookup_slow_v4+0x524/0x718 net/netfilter/xt_socket.c:178 Fix this by copying data into appropriate size headers based on protocol. Fixes: a583636a ("inet: refactor inet[6]_lookup functions to take skb") Signed-off-by:
Tejaswi Tanikella <tejaswit@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Florian Westphal authored
commit 569ccae6 upstream. rules in nftables a free'd using kfree, but protected by rcu, i.e. we must wait for a grace period to elapse. Normal removal patch does this, but nf_tables_newrule() doesn't obey this rule during error handling. It calls nft_trans_rule_add() *after* linking rule, and, if that fails to allocate memory, it unlinks the rule and then kfree() it -- this is unsafe. Switch order -- first add rule to transaction list, THEN link it to public list. Note: nft_trans_rule_add() uses GFP_KERNEL; it will not fail so this is not a problem in practice (spotted only during code review). Fixes: 0628b123 ("netfilter: nfnetlink: add batch support and use it from nf_tables") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
commit 2f6adf48 upstream. set->name must be free'd here in case ops->init fails. Fixes: 38745490 ("netfilter: nf_tables: Allow set names of up to 255 chars") Signed-off-by:
-
Jann Horn authored
commit bb765d1c upstream. Bump the file's refcount before moving the reference into the fd table, not afterwards. The old code could drop the file's refcount to zero for a short moment before calling get_file() via get_dma_buf(). This code can only be triggered on ARM systems that use Linaro's OP-TEE. Fixes: 967c9cca ("tee: generic TEE subsystem") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 45dd9b06 upstream. Doing an audit of trace events, I discovered two trace events in the xen subsystem that use a hack to create zero data size trace events. This is not what trace events are for. Trace events add memory footprint overhead, and if all you need to do is see if a function is hit or not, simply make that function noinline and use function tracer filtering. Worse yet, the hack used was: __array(char, x, 0) Which creates a static string of zero in length. There's assumptions about such constructs in ftrace that this is a dynamic string that is nul terminated. This is not the case with these tracepoints and can cause problems in various parts of ftrace. Nuke the trace events! Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 95a7d768 ("xen/mmu: Use Xen specific TLB flush instead of the generic one.") Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Halil Pasic authored
commit d66a7355 upstream. If the translation of a channel program fails, we may end up attempting to clean up (free, unpin) stuff that never got translated (and allocated, pinned) in the first place. By adjusting the lengths of the chains accordingly (so the element that failed, and all subsequent elements are excluded) cleanup activities based on false assumptions can be avoided. Let's make sure cp_free works properly after cp_prefetch returns with an error by setting ch_len of a ccw chain to the number of the translated CCWs on that chain. Cc: stable@vger.kernel.org #v4.12+ Acked-by:
Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by:
Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by:
Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 349524bc upstream. This causes warnings from cpufreq mutex code. This is also rather unnecessary and ineffective. If we really want to prevent concurrent unplug, we could take the unplug read lock but I don't see this being critical. Fixes: cd77b5ce ("powerpc/powernv/cpufreq: Fix the frequency read by /proc/cpuinfo") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
-
Andre Przywara authored
commit bf308242 upstream. kvm_read_guest() will eventually look up in kvm_memslots(), which requires either to hold the kvm->slots_lock or to be inside a kvm->srcu critical section. In contrast to x86 and s390 we don't take the SRCU lock on every guest exit, so we have to do it individually for each kvm_read_guest() call. Provide a wrapper which does that and use that everywhere. Note that ending the SRCU critical section before returning from the kvm_read_guest() wrapper is safe, because the data has been *copied*, so we don't need to rely on valid references to the memslot anymore. Cc: Stable <stable@vger.kernel.org> # 4.8+ Reported-by:
Jan Glauber <jan.glauber@caviumnetworks.com> Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Andre Przywara authored
commit 711702b5 upstream. kvm_read_guest() will eventually look up in kvm_memslots(), which requires either to hold the kvm->slots_lock or to be inside a kvm->srcu critical section. In contrast to x86 and s390 we don't take the SRCU lock on every guest exit, so we have to do it individually for each kvm_read_guest() call. Use the newly introduced wrapper for that. Cc: Stable <stable@vger.kernel.org> # 4.12+ Reported-by:
-
Kamal Dasu authored
commit 602805fb upstream. Always confirm the BSPI_MAST_N_BOOT_CTRL bit when enabling or disabling BSPI transfers. Fixes: 4e3b2d23 ("spi: bcm-qspi: Add BSPI spi-nor flash controller driver") Signed-off-by:
Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Kamal Dasu authored
commit 5eb9a07a upstream. Added fix for probing of spi-nor device non-zero chip selects. Set MSPI_CDRAM_PCS (peripheral chip select) with spi master for MSPI controller and not for MSPI/BSPI spi-nor master controller. Ensure setting of cs bit in chip select register on chip select change. Fixes: fa236a7e ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by:
-
Andy Shevchenko authored
commit efc4a137 upstream. Currently the 32-bit device address only is supported for DMA. However, starting from Intel Sunrisepoint PCH the DMA address of the device FIFO can be 64-bit. Change the respective variable to be compatible with DMA engine expectations, i.e. to phys_addr_t. Fixes: 34cadd9c ("spi: pxa2xx: Add support for Intel Sunrisepoint") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Wenwen Wang authored
commit 3f12888d upstream. In snd_ctl_elem_add_compat(), the fields of the struct 'data' need to be copied from the corresponding fields of the struct 'data32' in userspace. This is achieved by invoking copy_from_user() and get_user() functions. The problem here is that the 'type' field is copied twice. One is by copy_from_user() and one is by get_user(). Given that the 'type' field is not used between the two copies, the second copy is *completely* redundant and should be removed for better performance and cleanup. Also, these two copies can cause inconsistent data: as the struct 'data32' resides in userspace and a malicious userspace process can race to change the 'type' field between the two copies to cause inconsistent data. Depending on how the data is used in the future, such an inconsistency may cause potential security risks. For above reasons, we should take out the second copy. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hans de Goede authored
commit c8beccc1 upstream. Power-saving is causing loud plops on the Lenovo C50 All in one, add it to the blacklist. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1572975Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Federico Cuello authored
commit 21493316 upstream. Currently it's not possible to set volume lower than 26% (it just mutes). Also fixes this warning: Warning! Unlikely big volume range (=9472), cval->res is probably wrong. [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1 , and volume works fine for full range. Signed-off-by:
Federico Cuello <fedux@fedux.com.ar> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit c171654c upstream. stub_probe() calls put_busid_priv() in an error path when device isn't found in the busid_table. Fix it by making put_busid_priv() safe to be called with null struct bus_id_priv pointer. This problem happens when "usbip bind" is run without loading usbip_host driver and then running modprobe. The first failed bind attempt unbinds the device from the original driver and when usbip_host is modprobed, stub_probe() runs and doesn't find the device in its busid table and calls put_busid_priv(0 with null bus_id_priv pointer. usbip-host 3-10.2: 3-10.2 is not in match_busid table... skip! [ 367.359679] ===================================== [ 367.359681] WARNING: bad unlock balance detected! [ 367.359683] 4.17.0-rc4+ #5 Not tainted [ 367.359685] ------------------------------------- [ 367.359688] modprobe/2768 is trying to release lock ( [ 367.359689] ================================================================== [ 367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110 [ 367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768 [ 367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5 Fixes: 22076557 ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit 22076557 upstream. usbip_host updates device status without holding lock from stub probe, disconnect and rebind code paths. When multiple requests to import a device are received, these unprotected code paths step all over each other and drive fails with NULL-ptr deref and use-after-free errors. The driver uses a table lock to protect the busid array for adding and deleting busids to the table. However, the probe, disconnect and rebind paths get the busid table entry and update the status without holding the busid table lock. Add a new finer grain lock to protect the busid entry. This new lock will be held to search and update the busid entry fields from get_busid_idx(), add_match_busid() and del_match_busid(). match_busid_show() does the same to access the busid entry fields. get_busid_priv() changed to return the pointer to the busid entry holding the busid lock. stub_probe(), stub_disconnect() and stub_device_rebind() call put_busid_priv() to release the busid lock before returning. This changes fixes the unprotected code paths eliminating the race conditions in updating the busid entries. Reported-by: Jakub Jirasek Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit 7510df3f upstream. After removing usbip_host module, devices it releases are left without a driver. For example, when a keyboard or a mass storage device are bound to usbip_host when it is removed, these devices are no longer bound to any driver. Fix it to run device_attach() from the module exit routine to restore the devices to their original drivers. This includes cleanup changes and moving device_attach() code to a common routine to be called from rebind_store() and usbip_host_exit(). Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
commit 1e180f16 upstream. Device is left in the busid_table after unbind and rebind. Rebind initiates usb bus scan and the original driver claims the device. After rescan the device should be deleted from the busid_table as it no longer belongs to usbip_host. Fix it to delete the device after device_attach() succeeds. Signed-off-by:
-
Shuah Khan authored
commit 28b68acc upstream. Refine probe and disconnect debug msgs to be useful and say what is in progress. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
- 19 May, 2018 11 commits
-
-
Greg Kroah-Hartman authored
-
Willy Tarreau authored
commit 7f7ccc2c upstream. proc_pid_cmdline_read() and environ_read() directly access the target process' VM to retrieve the command line and environment. If this process remaps these areas onto a file via mmap(), the requesting process may experience various issues such as extra delays if the underlying device is slow to respond. Let's simply refuse to access file-backed areas in these functions. For this we add a new FOLL_ANON gup flag that is passed to all calls to access_remote_vm(). The code already takes care of such failures (including unmapped areas). Accesses via /proc/pid/mem were not changed though. This was assigned CVE-2018-1120. Note for stable backports: the patch may apply to kernels prior to 4.11 but silently miss one location; it must be checked that no call to access_remote_vm() keeps zero as the last argument. Reported-by:
Qualys Security Advisory <qsa@qualys.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
James Chapman authored
commit de3b58bc upstream. Revert commit 820da535 ("l2tp: fix missing print session offset info"). The peer_offset parameter is removed. Signed-off-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Antony Antony authored
commit 75bf50f4 upstream. copy geniv when cloning the xfrm state. x->geniv was not copied to the new state and migration would fail. xfrm_do_migrate .. xfrm_state_clone() .. .. esp_init_aead() crypto_alloc_aead() crypto_alloc_tfm() crypto_find_alg() return EAGAIN and failed Signed-off-by:
Antony Antony <antony@phenome.org> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
ethanwu authored
commit 998ac6d2 upstream. In preivous patch: Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist We avoid starting btrfs transaction and get this information from fs_info->running_transaction directly. When accessing running_transaction in check_delayed_ref, there's a chance that current transaction will be freed by commit transaction after the NULL pointer check of running_transaction is passed. After looking all the other places using fs_info->running_transaction, they are either protected by trans_lock or holding the transactions. Fix this by using trans_lock and increasing the use_count. Fixes: e4c3b2dc ("Btrfs: kill trans in run_delalloc_nocow and btrfs_cross_ref_exist") CC: stable@vger.kernel.org # 4.14+ Signed-off-by:
ethanwu <ethanwu@synology.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Herbert Xu authored
commit d16b46e4 upstream. We do not need locking in xfrm_trans_queue because it is designed to use per-CPU buffers. However, the original code incorrectly used skb_queue_tail which takes the lock. This patch switches it to __skb_queue_tail instead. Reported-and-tested-by:
Artem Savkov <asavkov@redhat.com> Fixes: acf568ee ("xfrm: Reinject transport-mode packets...") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
-
Dave Carroll authored
commit 7d3af7d9 upstream. commit b60710ec ("scsi: aacraid: enable sending of TMFs from aac_hba_send()") allows aac_hba_send() to send scsi commands, and TMF requests, but the existing code only updates the iu_type for scsi commands. For TMF requests we are sending an unknown iu_type to firmware, which causes a fault. Include iu_type prior to determining the validity of the command Reported-by:
Noah Misner <nmisner@us.ibm.com> Fixes: b60710ec ("aacraid: enable sending of TMFs from aac_hba_send()") Fixes: 423400e6 ("aacraid: Include HBA direct interface") Tested-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 69678bcd ] Damir reported a breakage of SO_BINDTODEVICE for UDP sockets. In absence of VRF devices, after commit fb74c277 ("net: ipv4: add second dif to udp socket lookups") the dif mismatch isn't fatal anymore for UDP socket lookup with non null sk_bound_dev_if, breaking SO_BINDTODEVICE semantics. This changeset addresses the issue making the dif match mandatory again in the above scenario. Reported-by:
Damir Mansurov <dnman@oktetlabs.ru> Fixes: fb74c277 ("net: ipv4: add second dif to udp socket lookups") Fixes: 1801b570 ("net: ipv6: add second dif to udp socket lookups") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit af50e4ba ] syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed85 ("nsh: add GSO support") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jiri Benc <jbenc@redhat.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jianbo Liu authored
[ Upstream commit 1ccef350 ] For ICMPv4, the checksum is calculated from the ICMP headers and data. Since the ICMPv4 checksum doesn't cover the IP header, we can allow to do L3 header re-write for this protocol. Fixes: bdd66ac0 ('net/mlx5e: Disallow TC offloading of unsupported match/action combinations') Signed-off-by:
Jianbo Liu <jianbol@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit cea67a2d ] syzbot/KMSAN reported an uninit-value in ip6_multipath_l3_keys(), root caused to a bad assumption of ICMP header being already pulled in skb->head ip_multipath_l3_keys() does the correct thing, so it is an IPv6 only bug. BUG: KMSAN: uninit-value in ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] BUG: KMSAN: uninit-value in rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 CPU: 0 PID: 4507 Comm: syz-executor661 Not tainted 4.16.0+ #87 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683 ip6_multipath_l3_keys net/ipv6/route.c:1830 [inline] rt6_multipath_hash+0x5c4/0x640 net/ipv6/route.c:1858 ip6_route_input+0x65a/0x920 net/ipv6/route.c:1884 ip6_rcv_finish+0x413/0x6e0 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0x1e16/0x2340 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x47df/0x4a90 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] netif_receive_skb_internal+0x49d/0x630 net/core/dev.c:4701 netif_receive_skb+0x230/0x240 net/core/dev.c:4725 tun_rx_batched drivers/net/tun.c:1555 [inline] tun_get_user+0x740f/0x7c60 drivers/net/tun.c:1962 tun_chr_write_iter+0x1d4/0x330 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x7fb/0x9f0 fs/read_write.c:482 vfs_write+0x463/0x8d0 fs/read_write.c:544 SYSC_write+0x172/0x360 fs/read_write.c:589 SyS_write+0x55/0x80 fs/read_write.c:581 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 23aebdac ("ipv6: Compute multipath hash for ICMP errors from offending packet") Signed-off-by:
Jakub Sitnicki <jkbs@redhat.com> Signed-off-by:
-
