- 13 Jun, 2017 40 commits
-
-
Szymon Mielczarek authored
Move the initialization of clocks list head to ufshcd_alloc_host() so that every driver doesn't have to do it. Remove checks for the list head being NULL because that is not possible. Signed-off-by:
Szymon Mielczarek <szymonx.mielczarek@intel.com> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Michael Schmitz authored
m68k_num_memory is unsuitable to test for the presence of FastRAM on CT60 if the kernel is located in FastRAM: in arch/m68k/mm/motorola.c the ST-RAM chunk is skipped and m68k_num_memory is decremented in this case. m68k_realnum_memory still contains the actual number of RAM chunks so use that. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> Tested-by:
Christian T. Steigies <cts@debian.org> Signed-off-by:
-
Corentin Labbe authored
Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which already have them. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Acked-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Dupuis, Chad authored
sc_cmd->sense_buffer is not guaranteed to be allocated so we need to sc_cmd->check if the pointer is NULL before trying to copy anything into it. Fixes the crash: [ 143.793176] [0000:00:00.0]:[qedf_eh_device_reset:626]: LUN RESET Issued... [ 143.802996] BUG: unable to handle kernel NULL pointer dereference at (null) [ 143.803063] IP: qedf_parse_fcp_rsp+0xe2/0x290 [qedf] [ 143.803077] PGD 0 [ 143.803078] P4D 0 [ 143.803103] Oops: 0002 [#1] SMP [ 143.803115] Modules linked in: msr(E) ebtable_filter(E) ebtables(E) ip6table_filter(E) ip6_tables(E) iptable_filter(E) ip_tables(E) x_tables(E) raw(E) scsi_transport_iscsi(E) br_netfilter(E) bridge(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl(E) sb_edac(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) kvm(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) xfs(E) ghash_clmulni_intel(E) pcbc(E) aesni_intel(E) aes_x86_64(E) crypto_simd(E) ipmi_ssif(E) glue_helper(E) iTCO_wdt(E) iTCO_vendor_support(E) lpc_ich(E) ipmi_si(E) pcspkr(E) hpilo(E) ioatdma(E) cryptd(E) ipmi_devintf(E) hpwdt(E) mfd_core(E) shpchp(E) dca(E) thermal(E) pcc_cpufreq(E) ipmi_msghandler(E) acpi_cpufreq(E) af_packet(E) btrfs(E) xor(E) raid6_pq(E) sr_mod(E) cdrom(E) ata_generic(E) sd_mod(E) 8021q(E) garp(E) [ 143.803302] stp(E) llc(E) mrp(E) bnx2fc(E) cnic(E) uio(E) mgag200(E) ata_piix(E) i2c_algo_bit(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) ahci(E) fb_sys_fops(E) bnx2x(E) qedf(E) serio_raw(E) libahci(E) ttm(E) uhci_hcd(E) ehci_pci(E) qed(E) mdio(E) libcrc32c(E) ehci_hcd(E) crc32c_intel(E) drm(E) libata(E) usbcore(E) tg3(E) ptp(E) hpsa(E) pps_core(E) scsi_transport_sas(E) libphy(E) wmi(E) button(E) fcoe(E) libfcoe(E) libfc(E) scsi_transport_fc(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) autofs4(E) [ 143.803438] CPU: 31 PID: 494 Comm: kworker/31:2 Tainted: G E 4.12.0-rc1-69-default+ #1 [ 143.803461] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [ 143.803480] Workqueue: qedf_io_wq qedf_fp_io_handler [qedf] [ 143.803496] task: ffff8804181a0000 task.stack: ffffc90003b64000 [ 143.803514] RIP: 0010:qedf_parse_fcp_rsp+0xe2/0x290 [qedf] [ 143.803529] RSP: 0018:ffffc90003b67dc8 EFLAGS: 00010246 [ 143.803544] RAX: 0000000000000000 RBX: ffff880401abdd48 RCX: 000000000000000c [ 143.803563] RDX: 0000000000000060 RSI: ffffffffa039c740 RDI: 0000000000000000 [ 143.803581] RBP: ffffc90003b67df0 R08: ffffffffa039dba8 R09: 0000000000000000 [ 143.803600] R10: 0000000000000000 R11: 0000000000000018 R12: 0000000000000000 [ 143.803619] R13: ffff88040ac80bc8 R14: 0000000000000008 R15: ffff880407c14008 [ 143.803638] FS: 0000000000000000(0000) GS:ffff88043f7c0000(0000) knlGS:0000000000000000 [ 143.804360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 143.805065] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000000406e0 [ 143.805753] Call Trace: [ 143.806436] qedf_process_tmf_compl+0x19/0x30 [qedf] [ 143.807124] qedf_process_cqe+0x265/0x280 [qedf] [ 143.807800] qedf_fp_io_handler+0x26/0x60 [qedf] [ 143.808469] process_one_work+0x138/0x370 [ 143.809133] worker_thread+0x4d/0x3b0 [ 143.809797] kthread+0x109/0x140 [ 143.810451] ? rescuer_thread+0x320/0x320 [ 143.811100] ? kthread_park+0x60/0x60 [ 143.811743] ret_from_fork+0x2c/0x40 Signed-off-by:
Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by:
-
Quinn Tran authored
Remove extra register read in each interrupt processing to improve performance. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
When driver is unloaded, all sessions are torn down, all commmands are flushed, chip is reset to ensure there is no knowledge of target mode in ISP. The irq_cmd_count field was used to make sure all commands are processed on top of that. The irq_cmd_count is now redundant and not needed. Signed-off-by:
-
Quinn Tran authored
Accelerate generation of SCSI busy to let initiators slow down when target is running low in resources. Signed-off-by:
-
Quinn Tran authored
Current code already destroy all target sessions when target Mode is stopped. Target core would waits for all commands that belong to each session to purge. The extra wait for interrupts to settle down is not relevant. Signed-off-by:
-
Quinn Tran authored
Previously, the ql2xexchoffld module parameter was used to control the max number of exchanges to be offload onto host memory. Module parameter ql_dm_tgt_ex_pct was used to control the percentage of exchanges allocated to the Target side. With this patch, module parameter ql_dm_tgt_ex_pct is no longer used to control exchanges for the driver. New module parameter ql2xiniexchg is added to control exchanges between target mode and initiator mode. With the updated module parameters, users can control the exact number of exchanges for either Initiator or Target. The exchange offload feature will be automatically enabled when the total number of exchanges exceeds 2048 limit. Signed-off-by:
-
Quinn Tran authored
Tell FW to track exchange/cmd state to prevent driver from using stale exchange or exchange that is not meant for this command. Signed-off-by:
-
Quinn Tran authored
Assign unique id to all traces and logs for debug purpose. Signed-off-by:
-
Quinn Tran authored
Name server login is normally handle by FW. In some rare case where one of the switches is being updated, name server login could get affected. Trigger relogin to name server when driver detects this condition. Signed-off-by:
-
Quinn Tran authored
Acked-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sawan Chandak authored
There is already flag defined PFLG_DISCONNECTED, which is set for PCI or register disconnect error condition. There is no need to have flag PCI_ERR, which has same purpose. Remove use of PCI_ERR flag and use PFLG_DISCONNECTED flag during error condition. Signed-off-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
-
Quinn Tran authored
In case of hardware queue full, commands can loop between TCM stack and tcm_qla2xx shim layers for retry. While command is waiting for retry, task mgmt can get ahead and abort the cmmand that encountered queue full condition. Fix this by dropping the command, if task mgmt has already started the command free process. Acked-by:
-
Quinn Tran authored
If the port is moved/changed, current code would trigger a deletion. If the port is already deleted, then do relogin. Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Quinn Tran authored
Convert usage of spin_lock to spin_lock_irqsave because qla2xxx driver can access all the data structures in an interrupt context. Signed-off-by:
-
Quinn Tran authored
Driver added mechanism to move ABTS/PUREX/RIDA mailbox to ATIO queue as part of commit id 41dc529a ("qla2xxx: Improve RSCN handling in driver"). This patch adds a check to only allow ABTS/PURX/RIDA to be moved to ATIO Queue for ISP83XX and ISP27XX. Cc: <stable@vger.kernel.org> # 4.11 Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Add the change_queue_depth member to our SCSI host template so the queue depth of devices attached to qedf can be changed dynamically. Signed-off-by:
-
Chad Dupuis authored
Increase the default number of commands that the driver tells the SCSI mid-layer it can do to increase the default performance of the driver. Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
Drop invalid or unexpected FCoE frames that come into the non-offload path since the FCoE firmware would not do the filtering for us. Signed-off-by:
-
Chad Dupuis authored
We need to add a bus reset no-op as without it some of the LUNs attached to a vport may go offline when the error handler escalates to host reset due to not having a bus reset handler in the driver. What happens is we escalate to host reset which does a soft link down/link up to reset the adapter. However with multiple vports attached it's been observed that if the vports do log back into the target within 5 seconds, the SCSI layer offlines the devices most likely due to a TUR timing out to verify that the device is online. Adding a bus reset handler will cause the TUR to be sent after the bus reset handler where the devices will still be online if the bus reset is initiated by sg_reset (which is the case in the test that was failing). The bus reset will succeed and not needlessly bring the device offline/online. Signed-off-by:
-
Chad Dupuis authored
We should be using the same logic to do a soft reset of the FCoE function whether it is initiated via sg_reset or the fc_host issue_lip attribute. Refactor the host reset and fcoe reset handlers to use the preferred logic which is currently contained in qedf_eh_host_reset(). Signed-off-by:
-
Chad Dupuis authored
Reduce the logging level we set for qed messages pertaining to this PCI function so that unnecessary messages are not printed in the kernel message log. Signed-off-by:
-
Chad Dupuis authored
Expose this information for interested applications. Signed-off-by:
Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by:
-
Chad Dupuis authored
If an fcport is not offloaded then the members of the qedf_rport struct are undefined which may cause a system crash. Signed-off-by:
-
Chad Dupuis authored
If there are multiple descriptors for a particular type in a clear virtual link we receive, we will not process it correctly but rather take the last value. This can cause us not to not flap the virtual link as the value from the descriptors that we compare against the our stored FCF or fc_lport values may not match. Change this to do a comparison when processing the each descriptor instead of at the end and then set a bool if we need to do the reset. Signed-off-by:
-
Chad Dupuis authored
We need to check the return code the set_fp_int() callback in case we were not allocated any fastpath interrupts or there was an error setting up the fastpath interrupts from the qed perspective. Signed-off-by:
-
Chad Dupuis authored
Signed-off-by:
-
Chad Dupuis authored
For libfc to register FDMI attributes we need to do two things: - Set the appropriate fc_host attributes that libfc will use to form the FDMI registration commands - Set lport->fdmi_enabled to 1 Signed-off-by:
-
Varun Prakash authored
T6 FCoE support is added in fw version 1.16.45.0 so return error if fw version < 1.16.45.0 for T6 adapters. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
Milan P. Gandhi authored
This patch removes an extra out label in _fcoe_create function where we return if creation of FCOE interface is failed. Signed-off-by:
Milan P. Gandhi <mgandhi@redhat.com> Acked-by:
Johannes Thumshirn <jth@kernel.org> Signed-off-by:
-
Milan P. Gandhi authored
This patch does a cleanup and fixes few small typos in fcoe.c Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in debugfs message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
-
Bart Van Assche authored
qla_tgt_cmd.free_work is not used by the qla2xxx driver. Hence remove that member of struct qla_tgt_cmd. Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Quinn Tran <quinn.tran@cavium.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Andy Grover <agrover@redhat.com> Cc: David Disseldorp <ddiss@suse.de> Signed-off-by:
-
Gustavo A. R. Silva authored
Add null check before indirectly dereferencing pointer task->lldd_task in statement u32 tag = slot->idx; Addresses-Coverity-ID: 1373843 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
