- 22 Jan, 2021 1 commit
-
-
Manivannan Sadhasivam authored
The Actions Semi pinctrl drivers are a mix of both ARM32 and ARM64 platforms. So let's add the correct platform dependency to avoid them being selected on the other. Signed-off-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210121062547.27173-1-manivannan.sadhasivam@linaro.orgSigned-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- 21 Jan, 2021 8 commits
-
-
Andre Przywara authored
There are only two pins left now, used to connect to the PMIC via I2C. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20210118020848.11721-6-andre.przywara@arm.comSigned-off-by:
-
Andre Przywara authored
Port A is used for an internal connection to some analogue circuitry which looks like an AC200 IP (as in the H6), though this is not mentioned in the manual. Signed-off-by:
-
Andre Przywara authored
A new SoC, a new compatible string. Also we were too miserly with just allowing seven interrupt banks. Signed-off-by:
-
Paul Cercueil authored
- Add otg function and otg-vbus group. - Add lcd-8bit, lcd-16bit, lcd-18bit, lcd-generic and lcd-special groups. Change the lcd-24bit group so that it only selects the pins that aren't in the lcd-18bit and lcd-generic groups (which breaks Device Tree in theory, but there is none out there for any JZ4760 based board, yet). Remove the lcd-no-pins group which is just useless. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20210120110722.20133-1-paul@crapouillou.netSigned-off-by:
-
Arnd Bergmann authored
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by:
Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.orgSigned-off-by:
-
Arnd Bergmann authored
The zte zx platform is getting removed, so this driver is no longer needed. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
- 18 Jan, 2021 7 commits
-
-
Jonathan Neuschäfer authored
yamllint warns: ./Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml 102:10 error wrong indentation: expected 10 but found 9 (indentation) Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20210116015350.3501927-1-j.neuschaefer@gmx.netSigned-off-by:
-
Jiapeng Zhong authored
Fix the follow coccicheck warnings: ./drivers/pinctrl/bcm/pinctrl-ns2-mux.c:856:29-38: WARNING: Comparison to bool. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1610705349-24310-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by:
-
Paul Cercueil authored
Tested on a JZ4740 system (ARCH=mips make qi_lb60_defconfig), this saves about 14 KiB, by allowing the compiler to garbage-collect all the functions and tables that correspond to SoCs that were disabled in the config. Signed-off-by:
-
Paul Cercueil authored
IF_ENABLED(CONFIG_FOO, ptr) evaluates to (ptr) if CONFIG_FOO is set to 'y' or 'm', NULL otherwise. The (ptr) argument must be a pointer. The IF_ENABLED() macro can be very useful to help GCC drop dead code. For instance, consider the following: #ifdef CONFIG_FOO_SUSPEND static int foo_suspend(struct device *dev) { ... } #endif static struct pm_ops foo_ops = { #ifdef CONFIG_FOO_SUSPEND .suspend = foo_suspend, #endif }; While this works, the foo_suspend() macro is compiled conditionally, only when CONFIG_FOO_SUSPEND is set. This is problematic, as there could be a build bug in this function, we wouldn't have a way to know unless the config option is set. An alternative is to declare foo_suspend() always, but mark it as maybe unused: static int __maybe_unused foo_suspend(struct device *dev) { ... } static struct pm_ops foo_ops = { #ifdef CONFIG_FOO_SUSPEND .suspend = foo_suspend, #endif }; Again, this works, but the __maybe_unused attribute is required to instruct the compiler that the function may not be referenced anywhere, and is safe to remove without making a fuss about it. This makes the programmer responsible for tagging the functions that can be garbage-collected. With this patch, it is now possible to write the following: static int foo_suspend(struct device *dev) { ... } static struct pm_ops foo_ops = { .suspend = IF_ENABLED(CONFIG_FOO_SUSPEND, foo_suspend), }; The foo_suspend() function will now be automatically dropped by the compiler, and it does not require any specific attribute. Signed-off-by: -
Linus Walleij authored
Merge tag 'renesas-pinctrl-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.12 - Restrict debug runtime-checks to Renesas platforms, - Initial support for the R-Car V3U SoC.
-
YANG LI authored
Fix the following coccicheck warning: ./drivers/pinctrl/sprd/pinctrl-sprd.c:690:8-23: WARNING: Comparison to bool Reported-by:
Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/1610440080-68600-1-git-send-email-abaci-bugfix@linux.alibaba.comSigned-off-by:
-
Souptick Joarder authored
Kernel test robot throws below warning -> smatch warnings: drivers/pinctrl/ti/pinctrl-ti-iodelay.c:708 ti_iodelay_pinconf_group_dbg_show() warn: inconsistent indenting Fixed the inconsistent indenting. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1610394585-4296-1-git-send-email-jrdr.linux@gmail.comSigned-off-by:
-
- 14 Jan, 2021 18 commits
-
-
Ulrich Hecht authored
Add pins, groups and functions for the 16-Bit Timer Pulse Unit outputs on the R-Car R8A779A0 (V3U) SoC. Signed-off-by:
Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-13-uli+renesas@fpond.euSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be>
-
Ulrich Hecht authored
This patch adds TMU TCLK1-4 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
Add the QSPI0-1 pins, groups and functions to the R8A779A0 (V3U) PFC driver. Signed-off-by:
-
Ulrich Hecht authored
This patch adds PWM0-4 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds MSIOF0-5 pins, groups and functions to R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds MMC pins, groups and functions to R8A779A0 (V3U) SoC. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165929.31002-8-uli+renesas@fpond.euSigned-off-by:
-
Ulrich Hecht authored
Add pins, groups, and function for the Interrupt Controller for External Devices (INTC-EX) on the R-Car R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds HSCIF0-3 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds DU pins, groups and function for the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds CANFD 0-7 and CANFD clock pinmux support for the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds groups and function for AVB PHY, LINK, MAGIC, RGMII and PTP pins for the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds I2C0-6 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds SCIF0, 1, 3 and 4 pins, groups and functions for the R8A779A0 (V3U) SoC. Signed-off-by:
-
Ulrich Hecht authored
This patch adds initial pinctrl support for the R8A779A0 (V3U) SoC, including bias, drive strength and voltage control. Based on patch by LUU HOAI <hoai.luu.ub@renesas.com>. Signed-off-by:
-
Ulrich Hecht authored
Signed-off-by:
-
Ulrich Hecht authored
This patch adds config macros describing the voltage levels available on a pin. The current default (3.3V/1.8V) maps to zero to avoid having to change existing PFC implementations. Signed-off-by:
-
Ulrich Hecht authored
The V3U SoC has several unlock registers, one per register group. They reside at offset zero in each 0x200 bytes-sized block. To avoid adding yet another table to the PFC implementation, this patch adds the option to specify an address mask instead of the fixed address in sh_pfc_soc_info::unlock_reg. Signed-off-by:
-
Ulrich Hecht authored
Document PFC support for the R-Car V3U (R8A779A0) SoC. Signed-off-by:
-
- 12 Jan, 2021 1 commit
-
-
Geert Uytterhoeven authored
When DEBUG is defined (e.g. if CONFIG_DEBUG_PINCTRL=y), the Renesas pin control driver runs sanity checks against the pin control tables. This may cause lots of output on the console, and can be annoying in ARM multi-platform kernels. Fix this by only running the checks when running on SuperH, or on a DT platform supported by the Renesas pin controller driver. Suggested-by:
-
- 06 Jan, 2021 1 commit
-
-
Samuel Holland authored
As there is an RSB controller in the H6 SoC, there should be some pin configuration for it. While no such configuration is documented, the "s_i2c" pins are suspiciously on the "alternate" function 3, with no primary function 2 given. This suggests the primary function for these pins is actually RSB, and that is indeed the case. Add the "s_rsb" pin functions so the RSB controller can be used. Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
-
- 05 Jan, 2021 1 commit
-
-
Zhaoyu Liu authored
Remove all empty lines at the end of functions in pinctrl subsystem, and make the code neat. Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Zhaoyu Liu <zackaryliu@yeah.net> Link: https://lore.kernel.org/r/X98NP6NFK1Afzrgd@manjaroSigned-off-by:
-
- 04 Jan, 2021 3 commits
-
-
Sergio Paracuellos authored
Kernel test robot reported the following warning: 'warning: no previous prototype for 'rt2880_pinmux_init''. This function is the entry point for the platform driver and it is private to this driver. Hence declare it 'static' which is the correct thing to do fixing also this warning. Reported-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20201228064727.30098-1-sergio.paracuellos@gmail.comSigned-off-by:
-
Sergio Paracuellos authored
Avoid some boilerplate code using 'PTR_ERR_OR_ZERO' in probe function. Signed-off-by:
-
Sergio Paracuellos authored
Some paths in probe function are returning '-EINVAL' instead of preserve original code from called functions. Change them to preserve all of them. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
