Generic headers to fold the 4-level pagetable into 3 levels.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rename clear_page_tables to clear_page_range. clear_page_range takes byte
ranges, and aggressively frees page table pages. Maybe useful to control
page table memory consumption on 4-level architectures (and even 3 level
ones).

Possible downsides are:
- flush_tlb_pgtables gets called more often (only a problem for sparc64
  AFAIKS).

- the opportunistic "expand to fill PGDIR_SIZE hole" logic that ensures
  something actually gets done under the old system is still in place.
  This could sometimes make unmapping small regions more inefficient. There
  are some other solutions to look at if this is the case though.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Split copy_page_range into the usual set of page table walking functions.
Needed to handle the complexity when moving to 4 levels.
Signed-off-by: Andi Kleen <ak@suse.de>

Split out from Andi Kleen's 4level patch by Nick Piggin.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adapt the i386 architecture to use the generic 2-level folding header.
Just to show how it is done.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Generic headers to fold the 3-level pagetable into 2 levels.
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add parentheses to x86-64's pgd_index's arguments
Signed-off-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This still leaves "pushf" able to see that somebody is
single-stepping us, but that is at least something you
can work around.

This should fix Wine for some games that otherwise
seem to think that they run under a debugger.

and use that for system call single-step events.

This one also gets the user mode test right, and makes sure
the siginfo is not leaking any stack contents.

macro to use the right address space.

Reported by Joseph Fannin during -mm, revert incorrect change.
Signed-off-by: Dave Airlie <airlied@linux.ie>

Allow drivers to override reclaim_buffers in an OS-independent 
way by passing drm_device_t* as first parameter, like in the
BSD version.

From: Felix Kuehling <fxhuehl@gmx.de>
Signed-off-by: Dave Airlie <airlied@linux.ie>

From: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>

From: Keith Withwell <keithw@tungstengraphics.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>

sparse complains about them:
drivers/char/drm/sis_ds.h:88:12: warning: dubious one-bit signed bitfield
drivers/char/drm/sis_ds.h:89:16: warning: dubious one-bit signed bitfield
Signed-off-by: Randy Dunlap <rddunlap@osdl.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>

into starflyer.(none):/foo/airlied/bitkeeper/drm-latest

From: Stefan Dirsch <sndirsch@suse.de>
Signed-off-by: Dave Airlie <airlied@linux.ie>

into starflyer.(none):/foo/airlied/bitkeeper/drm-latest

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Deepak Saxena

Patch adds implementation details for IXP46x CPUs and new IXDPG465
reference platform. 

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

Patch from Deepak Saxena

Supersedes 2226/1

According to the IXP Programmer's Reference Manual, a read from
IRQ_STATUS can only return '1' for IRQ sources that have been
explicitly enabled in IRQ_ENABLE. So if we never enable 'invalid'
IRQ sources, we don't actually have to mask off IRQ_STATUS with
IXP2000_VALID_IRQ_MASK.

Signed-off-by: Deepak Saxena
Signed-off-by: Russell King

into ppc970.osdl.org:/home/torvalds/v2.6/linux

From: Jason Gaston <jason.d.gaston@intel.com>

This patch adds the Intel ICH7 DID's to the pci_ids.h file
and updates the piix driver and related files for PATA support.

bart: this patch also adds PIRQ support
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- nothing clever here: the most noticeable change is the change of
  returned value for (*init_setup) in struct ide_pci_device_s which
  goes from void to int. Anything else is editing and checking for
  errors in the output of the compiler;
- pci_disable_device() added for the error path in pci_init_sgiioc4();
- BUG() removed in amd74xx_probe(): good old printk() is enough.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- no need to overwrite the status code returned by the pci_xyz() functions;
- jump into the new century and use DMA_32BIT_MASK;
- misc cleanup in the error paths. It should not add a huge value in
  ide_pci_enable() due to the FIXME comment but it should not bite too hard
  either.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_setup_pci_controller() puts the device in a PCI enabled state.
The patch adds a small helper to balance it when things go wrong.

Actually the helper does not *exactly* balance the setup: if it can
not do a better job, ide_setup_pci_controller() may only enable some
BARS whereas the new counterpart will try to disable everything.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

- Change the return value and the prototype of do_ide_setup_pci_device
  Due to lack of appropriate return status code, the current clients of
  do_ide_setup_pci_device() can not distinguish a failing invocation
  from a successfull one. The patch modify do_ide_setup_pci_device() so
  that it can propagate some of the errors from the lower layers.

- Make ide_setup_pci_device() aware of the change and propagate the news
  itself. I only gave a quick sight to create_proc_ide_interfaces() (and
  ide_remove_proc_entries()) but they do seem sane and it should not matter
  if it fails or not.

- ide_setup_pci_devices(): mostly the same thing than ide_setup_pci_device().
  do not look trivially suspect.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Alan Cox <alan@redhat.com>

This patch updates ide/pci/generic.c to fix the incorrect returns
causing PCI devices to be left reserved wrongly by the driver.

From: Francois Romieu <romieu@fr.zoreil.com>

Use -ENODEV instead of -EAGAIN.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

From: Alan Cox <alan@lxorguk.ukuu.org.uk>

Several IDE drivers return positive values as errors in the PCI setup
code. Unfortunately the PCI layer considers positive values as success
so the driver skips the device but still claims it and things then go
downhill.

This fixes the IT8172 driver.

From: Francois Romieu <romieu@fr.zoreil.com>

Use -ENODEV instead of -EAGAIN.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This fixes a build failure that happens when you don't select IPV6.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

DMA should be already released by ide_unregister()
(unless interface is still busy).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

/proc interface entries should be already unregistered
by ide_unregister() (unless interface is still busy).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

into bkbits.net:/repos/d/drm/drm-2.6

get_user() stores result in a local variable that later gets cast to
integer or pointer type.  The proper type for that is unsigned long. 
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from George G. Davis

Adds support for Thumb ld/st alignment fault fixups via conversion of
Thumb ld/st instruction forms into equivalent ARM instructions and
reusing ARM alignment fault handler for Thumb instructions. This
implementation was inspired by and initially based on the algorithm
found in gdb/sim/arm/thumbemu.c.

I've backed out the silly 'T' suffix on PC in this version as requested
by RMK. At this point, I prefer to avoid making any of the other changes
discussed, e.g. dump_instr() for bad instruction cases, in order to get
the basic Thumb support change committed.

Thanks!

Signed-off-by: George G. Davis
Signed-off-by: Russell King

Patch from Tony Lindgren

This patch syncs the mainline kernel with the linux-omap tree.
The highlights of the patch are:
- Add OMAP board specific low-level init functions for smc91x Ethernet
- DMA audio functions by Nishant Menon
- Remove references to OMAP specific serial.h

This is an updated version of ARM patch 2331/1 with extra comments
added to the omap_get_dma_src_pos() and omap_get_dma_dst_pos() functions
as recommended by RMK.

Signed-off-by: Tony Lindgren
Signed-off-by: Russell King

Patch from Tony Lindgren

Updates processor specific Kconfig options for OMAP

Signed-off-by: Tony Lindgren
Signed-off-by: Russell King