- 27 Sep, 2016 2 commits
-
-
Takashi Sakamoto authored
Sparse reports below warnings. bxt_rt298.c:275:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:290:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:304:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:317:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:331:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:344:9: warning: obsolete array initializer, use C99 syntax bxt_rt298.c:357:9: warning: obsolete array initializer, use C99 syntax There's no need to use obsoleted way. This commit fixes it. Fixes: 76016322 (ASoC: Intel: Add Broxton-P machine driver) Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Takashi Sakamoto authored
Sparse reports below warnings. bxt_da7219_max98357a.c:250:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:275:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:290:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:304:9: warning: obsolete array initializer, use C99 syntax bxt_da7219_max98357a.c:317:9: warning: obsolete array initializer, use C99 syntax There's no need to use obsoleted way. This commit fixes it. Fixes: 723bad3f (ASoC: Intel: Add Broxton-P Dialog Maxim machine driver) Signed-off-by:
-
- 26 Sep, 2016 2 commits
-
-
Yong Zhi authored
Add channel and rate constraints for Refcap and dmiccap devices respectively. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Signed-off-by:
-
Mark Brown authored
The audio component framework code has not yet landed in the i915 driver so drop the use of the API for the time being. Signed-off-by:
-
- 24 Sep, 2016 9 commits
-
-
John Keeping authored
This is used by the Chromebook Pixel 2015. Signed-off-by:
Ben Zhang <benzh@chromium.org> Signed-off-by:
Dylan Reid <dgreid@chromium.org> [john@metanate.com: - forward-port driver from Chromium OS 3.14 tree to master - remove wake on voice function that isn't supported by upstream rt5677 driver - remote owner assignment in platform_driver (Evan McClain) - convert to devm_snd_soc_register_card (Evan McClain) - add a full copyright header based on module license and Chromium OS Git history ] Signed-off-by:
John Keeping <john@metanate.com> Tested-by:
Genki Marshall <genki@genki.is> Tested-by:
Tom Rini <trini@konsulko.com> Signed-off-by:
-
Colin Ian King authored
The second declaration of status is shadowing the status of a higher scope. This uninitialized status results in garbage being returned by the !x86_match_cpu(cpu_ids) || !iosf_mbi_available() return exit path. Fix this by removing the extraneous second declaration of status. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Sandeep Tayal authored
With codec read sometimes the pin_sense shows invalid monitor present and eld_valid. Currently driver polls for few times to get the valid ELD data. To avoid the latency, Instead of reading ELD from codec, read it directly from the display driver using audio component framework. Removed the direct codec helper functions. Signed-off-by:
Sandeep Tayal <sandeepx.tayal@intel.com> Signed-off-by:
Jeeja KP <jeeja.kp@intel.com> Signed-off-by:
-
Colin Ian King authored
Trival fix, some dev_err/deb_dbg messages are missing a \n, so add it. Signed-off-by:
-
Colin Ian King authored
Trival fix, some dev_* messages are missing a \n, so add it. Signed-off-by:
-
Dharageswari R authored
Since modules ids are generated dynamically, we do not know the id associate with modules in another pipelines. This limits our ability to tell DSP about neighbouring modules. So add a table for quick referencing of allocated module ids. Signed-off-by:
Dharageswari R <dharageswari.r@intel.com> Signed-off-by:
-
Dharageswari R authored
Post bind parameters of KPB module contains the instance id's of neighbouring modules in the sink path Now that module instance ids are generated dynamically we need to update these parameters as well, so use the table created and update the ids Signed-off-by:
-
Dharageswari R authored
Use private id's of module instances that are generated during init_module for the IPC messages to DSP. These id's are freed up during delete pipeline. Signed-off-by:
-
Dharageswari R authored
Driver needs to send unique module instance id to firmware while creating the module and uses this id to communicate with DSP for setting parameters while audio use case is ongoing. But, we have upper bound of instance ID. The current IDs are coming from topology but it doesn't know the upper bound and can't assign unique id's subject to upper bounds as we can create a big graph but not all parts running at same time. This patch adds a 128bit unique id management routines which are built on top of ffz() for faster implementation. Unfortunately ffz() works on 32bits values, so additional code is added on top of ffz() to create a 128bit unique id. Signed-off-by:
-
- 14 Sep, 2016 1 commit
-
-
Samaga Krishna authored
We also support 32bit playback, so add that in DAI capabilities. Signed-off-by:
Samaga Krishna <samaga.krishna@intel.com> Signed-off-by:
-
- 03 Sep, 2016 2 commits
-
-
Pierre-Louis Bossart authored
fix issue reported by 0-Day with randconfig The commit a68bc0d4 ("ASoC: Intel: Atom: auto-detection of Baytrail-CR") added a dependency on IOSF_MBI. The code used the IS_ENABLED macro to check for this dependency but this is not enough in case the SST driver is built-in. This could be fixed with IS_REACHABLE but Baytrail-CR would not be detected depending on combinations of options Add dependency in Kconfig to solve this for good Reported-by:
0 day tester <fengguang.wu@intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
trivial fix to spelling mistake in dev_err message and replace "cant" with "can't" Signed-off-by:
-
- 01 Sep, 2016 4 commits
-
-
Dharageswari R authored
There could be more than one loadable module in a pipeline. So unload all modules whilst parsing the list. Signed-off-by:
-
Jeeja KP authored
DMA control IPC structure wrong config array length, So corrected the size Signed-off-by:
-
Vinod Koul authored
While converting to new core hda capability parsing, one instance of check had inverted logic which was converted wrongly. Fixes: ec8ae570 (ALSA: convert users to core bus_parse_capabilities) Signed-off-by:
-
Vinod Koul authored
For some platforms manifest data may not be defined, thus the private data would not be defined as well. So check the size of private data and proceed only if it is valid. Signed-off-by:
-
- 23 Aug, 2016 1 commit
-
-
Shreyas NC authored
Topology manifest has lib names and lib count info. So, define tokens to represent module private data and parse these tokens to fill up the manifest structure in the driver accordingly. Signed-off-by:
Shreyas NC <shreyas.nc@intel.com> Signed-off-by:
-
- 22 Aug, 2016 3 commits
-
-
Shreyas NC authored
The skl_dfw_config structure is no longer required as the module config is populated by parsing and reading the token values. So, remove the structure. Signed-off-by:
-
Shreyas NC authored
Skl topology data is preceded by a descriptor for number of data blocks, the size of the data block and type of data block. The type of the data block can be either a tuple or a binary blob. Private data is parsed based on data block type and module data is filled accordingly. Signed-off-by:
-
Shreyas NC authored
With recent topology changes in alsa-lib, driver data for modules can now be passed in topology conf file using tuples. This patch defines vendor specific tokens to describe private data with tuples. The allowed token types are UUID, string, bool, byte, short and word. These tokens will be referenced by the vendor tuples in the conf file. In the topology conf file, multiple data blocks can be defined for a widget which can be either tuple vendor array or blob. So, each data block will be preceded by a descriptor to identify size and type of block. These descriptors will be token value pairs. Tokens for module_id and loadable flag are not defined as these are read from the DSP FW manifest. Signed-off-by:
-
- 18 Aug, 2016 1 commit
-
-
Colin Ian King authored
trivial fix to spelling mistake in dev_err message and reformat code to avoid being over 80 chars wide per line Signed-off-by:
-
- 17 Aug, 2016 2 commits
-
-
Pierre-Louis Bossart authored
Baytrail-CR platform needing SSP0-AIF1 routing Also fix SSP0 while we are at it. Suggested-by:
Andrei Lavreniyuk <andy.lavr@gmail.com> Signed-off-by:
-
Pierre-Louis Bossart authored
spurious __initconst copy/pasted from other drivers Signed-off-by:
-
- 15 Aug, 2016 13 commits
-
-
Pierre-Louis Bossart authored
use dev_info to provide better support for autodetection and DMI-based quirks, no functional changes Signed-off-by:
-
Pierre-Louis Bossart authored
Add DMI-based quirk, routing from SSP0 to AIF1 is not very usual Suggested-by:
Antonio Ospite <ao2@ao2.it> Signed-off-by:
-
Irina Tirdea authored
I2S MCLK has been routed to LSE connector on the MinnowBoard starting with HW version 3. Older versions of the board do not have MCLK wired. Add dmi quirk to disable MCLK for MinnowBoard MAX (v2). Signed-off-by:
Irina Tirdea <irina.tirdea@intel.com> Signed-off-by:
-
Irina Tirdea authored
Use platform clocks "pmc_plt_clk_3" when MCLK quirk is defined. By default always enable the 19.2 MHz PLL. Signed-off-by:
-
Pierre-Louis Bossart authored
Some platforms have the analog mic connected to IN3, add route accordingly Signed-off-by:
-
Pierre-Louis Bossart authored
Auto routing based on Baytrail/Baytrail-CR detection Signed-off-by:
-
Pierre-Louis Bossart authored
SSP0 uses 16 bits 2ch, SSP2 24 bits 2ch Signed-off-by:
-
Pierre-Louis Bossart authored
Allow for all possible combinations of SSP0,SSP2, AIF1, AIF2 combination (only one at a time) Signed-off-by:
-
Pierre-Louis Bossart authored
Add quirk to model routing on Baytrail-CR devices Signed-off-by:
-
Pierre-Louis Bossart authored
Existing code used SSP2, make selection of SSP id dependent on port name. This is required when the machine driver uses non-default settings Signed-off-by:
-
Pierre-Louis Bossart authored
The Atom DPCM driver only allowed for the SSP2 interface, add definitions for modem/SSP0. These definitions might be used to route audio to a codec connected to SSP0 (instead of a modem in traditional usages), but there is a restriction to 2ch I2S. SSP2 is capable of handling up to 4 slot TDM. Signed-off-by:
-
Pierre-Louis Bossart authored
BYT-CR needs special handling to deal with BIOS issues. For some reason the IPC interrupt index is also modified from the Baytrail-T reference. Use PUNIT BIOS config bits to infer platform details. Assume regular Baytrail configs if status is incorrect or CONFIG_IOSF_MBI is not enabled. SSP0 routing issues are solved without dedicated firmware in following patches Tested on Asus T100TA and T100TAF. Signed-off-by:
-
Pierre-Louis Bossart authored
Some Baytrail-CR devices rely on analog mics connected with differential pairs and not the single-ended default Add quirk and enable it for T00TAF Signed-off-by:
-
