- 08 Jan, 2017 32 commits
-
-
stephen hemminger authored
In dev_get_stats() the statistic structure storage has already been zeroed. Therefore network drivers do not need to call memset() again. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2017-01-08 This series contains updates to fm10k only. Ngai-Mint changes the driver to use the MAC pointer in the fm10k_mac_info structure for fm10k_get_host_state_generic(). Fixed a race condition where the mailbox interrupt request bits can be cleared before being handled causing certain mailbox messages from the PF to be untreated and the PF will enter in some inactive state. Jake removes the typecast of u8 to char, and the extra variable that was created for the typecast. Bumps the driver version. Added back the receive descriptor timestamp value so that applications built on top of the IES API can function properly. Cleaned up the debug statistics flag, since debug statistics were removed and the flag was missed in the removal. Scott limits the DMA sync for CPU to the actual length of the packet, instead of the entire buffer, since the DMA sync occurs every time a packet is received. ==================== Signed-off-by: -
David Ahern authored
fl4 arg is not used; remove it. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
ipmr_get_route has 1 caller and the nowait arg is 0. Remove the arg and simplify ipmr_get_route accordingly. Signed-off-by:
-
Derek Chickles authored
Because every call to octeon_flush_iq() has a hardcoded 1 for the pending_thresh argument, simplify that function by removing that argument. This avoids one atomic read as well. Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Satanand Burla <satananda.burla@cavium.com> Signed-off-by:
-
Jacob Keller authored
The debug statistics were removed due to complications with the ethtool statistics API which are not possible to resolve without a new statistics interface. The flag was left behind, but we no longer need it. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
This was accidentally removed when we defeatured the full 1588 Clock support. We need to report the Rx descriptor timestamp value so that applications built on top of the IES API can function properly. Additionally, remove the FM10K_FLAG_RX_TS_ENABLED, as it is not used now that 1588 functionality has been removed. Signed-off-by:
-
Scott Peterson authored
On packet RX, we perform a dma sync for cpu before passing the packet up. Here we limit that sync to the actual length of the incoming packet, rather than always syncing the entire buffer. Signed-off-by:
Scott Peterson <scott.d.peterson@intel.com> Signed-off-by:
-
Jacob Keller authored
Signed-off-by:
-
Ngai-Mint Kwan authored
Partially revert commit 5e93cbad ("fm10k: Reset mailbox global interrupts", 2016-06-07) The register bits related to this commit are now solely being handled by the IES API. Recent changes in the IES API will allow an automatic recovery from improper handling of these bits. Signed-off-by:
Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by:
-
Ngai-Mint Kwan authored
Multiple IES API resets can cause a race condition where the mailbox interrupt request bits can be cleared before being handled. This can leave certain mailbox messages from the PF to be untreated and the PF will enter in some inactive state. If this situation occurs, the IES API will initiate a mailbox version reset which, then, trigger a mailbox state change. Once this mailbox transition occurs (from OPEN to CONNECT state), a request for reset will be returned. This ensures that PF will undergo a reset whenever IES API encounters an unknown global mailbox interrupt event or whenever the IES API terminates. Signed-off-by:
-
Jacob Keller authored
We don't need to typecast a u8 * into a char *, so just remove the extra variable. Signed-off-by:
-
Ngai-Mint Kwan authored
Since a pointer "mac" to fm10k_mac_info structure exists, use it to access the contents of its members. Signed-off-by:
-
Vivien Didelot authored
Isolate the HWMON support in DSA in its own file. Currently only the legacy DSA code is concerned. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Murali Karicheri says: ==================== netcp: enhancements and minor fixes This series is for net-next. This propagates enhancements and minor bug fixes from internal version of the driver to keep the upstream in sync. Please review and apply if this looks good. Tested on all of K2HK/E/L boards with nfs rootfs. Test logs below K2HK-EVM: http://pastebin.ubuntu.com/23754106/ k2L-EVM: http://pastebin.ubuntu.com/23754143/ K2E-EVM: http://pastebin.ubuntu.com/23754159/ History: v1 - dropped 1/10 amd 2/10 of v0 based on comments from Rob as it needs more work before submission v0 - Initial version ==================== Signed-off-by:
-
Karicheri, Muralidharan authored
For NetCP NU Switch ALE, some of the mask bits are different than defaults used in the driver. Add a new macro DEFINE_ALE_FIELD1 that use a configurable mask bits and use it in the driver. These bits are set to correct values by using the new variables added to cpsw_ale structure and re-used in the macros. The parameter nu_switch_ale is configured by the caller driver to indicate the ALE is for that switch and is used in the ALE driver to do customization as needed. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Karicheri, Muralidharan authored
ALE h/w on newer version of NetCP (K2E/L/G) does provide a ALE_STATUS register for the size of the ALE Table implemented in h/w. Currently for example we set ALE Table size to 1024 for NetCP ALE on K2E even though the ALE Status/Documentation shows it has 8192 entries. So take advantage of this register to read the size of ALE table supported and use that value in the driver for the newer version of NetCP ALE. For NetCP lite, ALE Table size is much less (64) and indicated by a size of zero in ALE_STATUS. So use that as a default for now. While at it, also fix the ale table size on 10G switch to 2048 per User guide http://www.ti.com/lit/ug/spruhj5/spruhj5.pdfSigned-off-by:
-
Karicheri, Muralidharan authored
In NU Ethernet switch used on some of the Keystone SoCs, there is separate UNKNOWNVLAN register for membership, unreg mcast flood, reg mcast flood and force untag egress bits in ALE. So control for these fields require different address offset, shift and size of field. As this ALE has the same version number as ALE in CPSW found on other SoCs, customization based on version number is not possible. So use a configuration parameter, nu_switch_ale, to identify the ALE ALE found in NU Switch. Different treatment is needed for NU Switch ALE due to difference in the ale table bits, separate unknown vlan registers etc. The register information available in ale_controls, needs to be updated to support the netcp NU switch h/w. So it is not constant array any more since it needs to be updated based on ALE type. The header of the file is also updated to indicate it supports N port switch ALE, not just 3 port. The version mask is 3 bits in NU Switch ALE vs 8 bits on other ALE types. While at it, change the debug print to info print so that ALE version gets displayed in boot log. Signed-off-by:
-
Karicheri, Muralidharan authored
Some of the newer Ethernet switch hw (such as that on k2e/l/g) can strip the Etherenet FCS from packet at the port 0 egress of the switch. So use this capability instead of doing it in software. Signed-off-by:
-
Karicheri, Muralidharan authored
Currently to parse phy-handle, driver doesn't check if the interface is MAC to PHY. This patch add this check for all MAC to PHY interface types supported by the driver. Signed-off-by:
-
Michael Scherban authored
Previously the network statistics were stored in 32 bit variable which can cause some stats to roll over after several minutes of high traffic. This implements 64 bit storage so larger numbers can be stored. Signed-off-by:
Michael Scherban <m-scherban@ti.com> Signed-off-by:
-
Karicheri, Muralidharan authored
The psdata is populated with command data by netcp modules to the tail of the buffer and set_words() copy the same to the front of the psdata. So remove the redundant memmov function call. Signed-off-by:
-
Karicheri, Muralidharan authored
Extract the eflag bits from the received desc and pass it down the rx_hook chain to be available for netcp modules. Also the psdata and epib data has to be inspected by the netcp modules. So the desc can be freed only after returning from the rx_hook. So move knav_pool_desc_put() after the rx_hook processing. Signed-off-by:
-
David S. Miller authored
Grygorii Strashko says: ==================== net: ethernet: ti: cpsw: support placing CPDMA descriptors into DDR This series intended to add support for placing CPDMA descriptors into DDR by introducing new module parameter "descs_pool_size" to specify size of descriptor's pool. The "descs_pool_size" defines total number of CPDMA CPPI descriptors to be used for both ingress/egress packets processing. If not specified - the default value 256 will be used which will allow to place descriptor's pool into the internal CPPI RAM. In addition, added ability to re-split CPDMA pool of descriptors between RX and TX path via ethtool '-G' command wich will allow to configure and fix number of descriptors used by RX and TX path, which, then, will be split between RX/TX channels proportionally depending on number of RX/TX channels and its weight. This allows significantly to reduce UDP packets drop rate for bandwidth >301 Mbits/sec (am57x). Before enabling this feature, the am437x SoC has to be fixed as it's proved that it's not working when CPDMA descriptors placed in DDR. So, the patch 1 fixes this issue. ==================== Signed-off-by: -
Grygorii Strashko authored
Even if no_bd_ram property is described in TI CPSW bindings the support for it has never been introduced in CPSW driver, so there are no real users of it. Hence, remove no_bd_ram property from documentation and DT files. Cc: 'Rob Herring <robh+dt@kernel.org>' Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
Grygorii Strashko authored
The CPDMA uses one pool of descriptors for both RX and TX which by default split between all channels proportionally depending on total number of CPDMA channels and number of TX and RX channels. As result, more descriptors will be consumed by TX path if there are more TX channels and there is no way now to dedicate more descriptors for RX path. So, add the ability to re-split CPDMA pool of descriptors between RX and TX path via ethtool '-G' command wich will allow to configure and fix number of descriptors used by RX and TX path, which, then, will be split between RX/TX channels proportionally depending on RX/TX channels number and weight. ethtool '-G' command will accept only number of RX entries and rest of descriptors will be arranged for TX automatically. Command: ethtool -G <devname> rx <number of descriptors> defaults and limitations: - minimum number of rx descriptors is 10% of total number of descriptors in CPDMA pool - maximum number of rx descriptors is 90% of total number of descriptors in CPDMA pool - by default, descriptors will be split equally between RX/TX path - any values passed in "tx" parameter will be ignored Usage: # ethtool -g eth0 Pre-set maximums: RX: 7372 RX Mini: 0 RX Jumbo: 0 TX: 0 Current hardware settings: RX: 4096 RX Mini: 0 RX Jumbo: 0 TX: 4096 # ethtool -G eth0 rx 7372 # ethtool -g eth0 Ring parameters for eth0: Pre-set maximums: RX: 7372 RX Mini: 0 RX Jumbo: 0 TX: 0 Current hardware settings: RX: 7372 RX Mini: 0 RX Jumbo: 0 TX: 820 Signed-off-by:
-
Grygorii Strashko authored
The CPSW CPDMA can process buffer descriptors placed as in internal CPPI RAM as in DDR. This patch adds support in CPSW and CPDMA for descs_pool_size mudule parameter, which defines total number of CPDMA CPPI descriptors to be used for both ingress/egress packets processing: - memory size, required for CPDMA descriptor pool, is calculated basing on number of descriptors specified by user in descs_pool_size and CPDMA descriptor size and allocated from coherent memory (CMA area); - CPDMA descriptor pool will be allocated in DDR if pool memory size > internal CPPI RAM or use internal CPPI RAM otherwise; - if descs_pool_size not specified in DT - the default value 256 will be used which will allow to place CPDMA descriptors pool into the internal CPPI RAM (current default behaviour); - CPDMA will ignore descs_pool_size if descs_pool_size = 0 for backward comaptiobility with davinci_emac. descs_pool_size is boot time setting and can't be changed once CPSW/CPDMA is initialized. Signed-off-by:
-
Grygorii Strashko authored
Use devm_ioremap() and simplify the code. Signed-off-by:
-
Grygorii Strashko authored
Update cpdma_desc_pool_create/destroy() to accept only one parameter struct cpdma_ctlr*, as this structure contains all required information for pool creation/destruction. Signed-off-by:
-
Grygorii Strashko authored
The currently processing cpdma descriptor with EOQ flag set may contain two values in Next Descriptor Pointer field: - valid pointer: means CPDMA missed addition of new desc in queue; - null: no more descriptors in queue. In the later case, it's not required to write to HDP register, but now CPDMA does it. Hence, add additional check for Next Descriptor Pointer != null in cpdma_chan_process() function before writing in HDP register. Signed-off-by:
-
Grygorii Strashko authored
It's observed that cpsw/cpdma is not working properly when CPPI descriptors are placed in DDR instead of internal CPPI RAM on am437x SoC: - rx/tx silently stops processing packets; - or - after boot it's working for sometime, but stuck once Network load is increased (ping is working, but iperf is not). (The same issue has not been reproduced on am335x and am57xx). It seems that write to HDP register processed faster by interconnect than writing of descriptor memory buffer in DDR, which is probably caused by store buffer / write buffer differences as these functions are implemented differently across devices. So, to fix this i come up with two minimal, required changes: 1) all accesses to the channel register HDP/CP/RXFREE registers should be done using sync IO accessors readl()/writel(), because all previous memory writes writes have to be completed before starting channel (write to HDP) or completing desc processing. 2) the change 1 only doesn't work on am437x and additional reading of desc's field is required right after the new descriptor was filled with data and before pointer on it will be stored in prev_desc->hw_next field or HDP register. In addition, to above changes this patch eliminates all relaxed ordering I/O accessors in this driver as suggested by David Miller to avoid such kind of issues in the future, but with one exception - relaxed IO accessors will still be used to fill desc in cpdma_chan_submit(), which is safe as there is read barrier at the end of write sequence, and because sync IO accessors usage here will affect on net performance. Signed-off-by:
-
- 07 Jan, 2017 8 commits
-
-
David S. Miller authored
Guillaume Nault says: ==================== l2tp: cleanup socket lookup code in l2tp_ip and l2tp_ip6 First three patches remove redundant tests and add missing "const" qualifiers. Fourth patch splits the conditionals found in __l2tp_ip*_bind_lookup(), to make these functions easier to review. In the process, I found that some corner cases were still not handled properly. So I've added the missing tests in this patch too, because they're pretty simple and the whole "if" statements are modified anyway. I expect it to be easier to review this way. If not, I can split up patch #4, post the missing tests separately to -net, and later repost this series as pure cleanup. Just let me know. ==================== Signed-off-by: -
Guillaume Nault authored
Split conditions, so that each test becomes clearer. Also, for l2tp_ip, check if "laddr" is 0. This prevents a socket from binding to the unspecified address when other sockets are already bound using the same device (if any), connection ID and namespace. Same thing for l2tp_ip6: add ipv6_addr_any(laddr) and ipv6_addr_any(raddr) tests to ensure that an IPv6 unspecified address passed as parameter is properly treated a wildcard. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
If "l2tp" was NULL, that'd mean "sk" is NULL too. This can't happen since "sk" is returned by sk_for_each_bound(). Signed-off-by:
-
Guillaume Nault authored
Add const qualifier wherever possible for __l2tp_ip_bind_lookup() and __l2tp_ip6_bind_lookup(). Signed-off-by:
-
Guillaume Nault authored
addr_len's value has already been verified at this point. Signed-off-by:
-
santosh.shilimkar@oracle.com authored
Larger than supported value can lead to array read/write overflow. Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20170106' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== afs: Implement bulk read This pair of patches implements bulk data reading from an AFS server. ==================== Signed-off-by:
-
Xin Long authored
sctp stream reconf, described in RFC 6525, needs a structure to save per stream information in assoc, like stream state. In the future, sctp stream scheduler also needs it to save some stream scheduler params and queues. This patchset is to prepare the stream array in assoc for stream reconf. It defines sctp_stream that includes stream arrays inside to replace ssnmap. Note that we use different structures for IN and OUT streams, as the members in per OUT stream will get more and more different from per IN stream. v1->v2: - put these patches into a smaller group. v2->v3: - define sctp_stream to contain stream arrays, and create stream.c to put stream-related functions. - merge 3 patches into 1, as new sctp_stream has the same name with before. Signed-off-by:Xin Long <lucien.xin@gmail.com> Reviewed-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
