- 29 May, 2017 27 commits
-
-
Juliana Rodrigues authored
This patch fixes multiple comparison to NULL checkpatch errors by rewriting the conditional as a negation. Signed-off-by:
Juliana Rodrigues <juliana.orod@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Juliana Rodrigues authored
Removes numerous unnecessary blank lines in order to fix checkpatch styling issues. Signed-off-by:
-
Juliana Rodrigues authored
This patch removes numerous unnecessary parentheses in order to fix checkpatch styling issues. Signed-off-by:
-
Juliana Rodrigues authored
This patch fixes a checkpatch issue caused by using function names inside strings. Those function names were replaced by __func__. Signed-off-by:
-
Juliana Rodrigues authored
This patch solves a checkpatch issue caused by not using spaces around an OR sign. Signed-off-by:
-
Juliana Rodrigues authored
This patch adds * on block comments subsequent lines, which were causing a checkpatch styling warning. Signed-off-by:
-
Juliana Rodrigues authored
This patch fixes some checkpatch errors in which comments go over 80 characters per line. Signed-off-by:
-
Szilveszter Székely authored
Comparisons should place the constant on the right side of the test This patch fixes coding style issues as reported by checkpatch. Signed-off-by:
Szilveszter Székely <szekelyszilv@gmail.com> Signed-off-by:
-
Ioana Radulescu authored
WRIOP hardware may need to write to the hardware annotation area of Tx buffers (e.g. frame status bits) and also to the data area (e.g. L4 checksum in frame header). Map these buffers as DMA_BIDIRECTIONAL, otherwise the write transaction through SMMU will not be allowed. Signed-off-by:
Nipun Gupta <nipun.gupta@nxp.com> Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
Ioana Radulescu authored
Use the correct mechanisms for translating a DMA-mapped IOVA address into a virtual one. Without this fix, once SMMU is enabled on Layerscape platforms, the Ethernet driver throws IOMMU translation faults. Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
Derek Robson <robsonde@gmail.com> Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Derek Robson authored
Fixed block comment alignment, Style fix only Found using checkpatch Signed-off-by:
-
Gennadii Altukhov authored
Fix checkpatch.pl reported checks: spaces preferred around '/' and '<<' in cc_crypto_ctx.h Signed-off-by:
Gennadii Altukhov <grinrag@gmail.com> Signed-off-by:
-
Marko Stankovic authored
Fix a missing blank line issue reported by checkpatch.pl Signed-off-by:
Marko Stankovic <dartnorris@gmail.com> Signed-off-by:
-
Marko Stankovic authored
Fix the multiple blank lines issue reported by checkpatch.pl Signed-off-by:
-
Nikola Jelic authored
There were several in-place conversions of 16 and 32-bit data, which caused sparse to detect them. Changed them to the in situ versions, such as: le16_to_cpu -> le16_to_cpus Signed-off-by:
Nikola Jelic <nikola.jelic83@gmail.com> Signed-off-by:
-
Rishiraj Manwatkar authored
Parentheses added to avoid operator precedence issues. Signed-off-by:
Rishiraj Manwatkar <manwatkar@outlook.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.13 cycle Two entirely new drivers in here plus the usual range of cleanups and features. New device support * ad5064 - add ltc2631, ltc2633 and ltc2635 support. * bma180 - trivial support for bma250e (new id) * hid-sensor-rotation - add relative orientation and geometric orientation support. * isl29028 - add isl29030 support (its effectively the same part from a driver point of view) * maxim_thermocouple - add max31856 id. * meson-saradc - add meson8b SoC adc support. * ti-adc084s021 - new driver and bindings. * ti-adc108s102 - new driver and bindings. Staging graduations * isl29028 Features * bma180 - ACPI enumeration for BMA250E which is used in various x86 tablets. * hi8453 - add raw access rather than only events. * hid-sensor-hub - Implement batch mode in which we can set a threshold on the amount of time between data coming from the fifos. This is the first device to do this rather than use a watershed on the number of samples. * hts221 - power management support * lsm6dsx - add system power management support. * rpr0521 - sampling frequency read / write * stm32-trigger - add support for TRG02 triggers. * tsl2583 - runtime power management support. Cleanups * core - inkern: fix a double unlock in iio_read_available_channel_raw when raw value doesn't appear to be raw (error path). - fixup accidental sizeof pointer in iio_device_add_mask_type. * docs - fix an accidental duplicated line in sysfs-bus-iio-meas-spec. * tools - use local include/uapi headers to ensure always up to date. - increase length of allowed trigger names. * ad9834 - symbolic to octal permissions. * ade7753 - symbolic to octal permissions. - fix indentation * ade7754 - symbolic to octal permissions. * ade7758 - symbolic to octal permissions. - ade7854 - symbolic to octal permissions. * as3935 - move out of storm check to given consistent results for raw and processed values. * bmp280 - fix bme280 naming in Kconfig help. * hi8435 - avoid garbage on event after enable. - add missing in_voltage_sensing_mode_available to list possible enum options. - handle the reset gpio with the obvious polarity rather than relying on DT to provide it correctly. * hid-sensors - fix a wrong error path scrubbing of return values. * hid-sensors-accel - drop static on a local variable * hid-sensors-rotation - Add missing scale and offset property parsing support. * ina2xx - Fix a bad use of GENMASK and some typos and whitespace issues. * isl29018 - only declare the ACPI table when ACPI is enabled. * isl29028 - fix proximity sleep times. * lsm6dsx - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of dealing with the various PM config variables. * meson-saradc - mark meson_sar_adc_data static and const. * rcar-gyroadc - derive the interface clock speed from the fck clock on the basis they are the same actual clock. - drop the now unused if clock from the bindings. * rpr0521 - disable sensor when marked as such rather than always enabling it. - poweroff if probe fails and we can talk to device. - make sure device powered off when it doesn't need to be on. - use sizeof rather than hardcoded size on value read. - whitespace fixup. - reorder channel numbers ready for buffered support which didn't quite make this pull request. * st-accel - fix platform data initialization to allow remove and reprobe. * st-pressure - fix platform data initialization to allow remove and reprobe. * tsl2x7x - S_IRUGO, S_IWUSR to octal values - rename driver for consistency with more recent drivers - drop FSF mailing address - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and relevant function renames. * zpa2326 - report an error for consistency with other error paths.
-
- 25 May, 2017 13 commits
-
-
Aliza Minkov authored
According to the coding-style documentation, functions in source files should be separated with one blank line. Redundant blank lines were removed from this source file, in accordance with coding-style documentation. Signed-off-by:
Aliza Minkov <minkov.al@gmail.com> Signed-off-by:
-
Marko Stankovic authored
Alignment styles are used interchangeably, align parameters to open parenthesis and fix issues reported by checkpatch.pl Signed-off-by:
-
Rui Teng authored
This is a patch to the spk_ttyio.c file which fixes up the indent error reported by the checkpatch.pl tool. Signed-off-by:
Rui Teng <rui.teng@linux.vnet.ibm.com> Signed-off-by:
-
Marko Stankovic authored
Fix unnecessary blank lines issues reported by checkpatch.pl Signed-off-by:
-
Marko Stankovic authored
Fix comparison to NULL issues reported by checkpatch.pl Signed-off-by:
-
Marko Stankovic authored
Fix checkpatch issue by adding spaces around the '%' operator Signed-off-by:
-
Paolo Cretaro authored
Fix warning issued by sparse: symbol 'ion_device_create' was not declared. Should it be static? Signed-off-by:
Paolo Cretaro <melko@frugalware.org> Signed-off-by:
-
Dan Carpenter authored
On most of the common arches char is signed so it can't ever == 0xff. Let's fix this by making it a u8. Fixes: 6b9ad1c7 ("staging: speakup: add send_xchar, tiocmset and input functionality for tty") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Sameer Wadgaonkar authored
Removed a check for physaddr=0 in handle_command() function in visorchipset.c. Signed-off-by:
Sameer Wadgaonkar <sameer.wadgaonkar@unisys.com> Reported-by:
David Kershner <david.kershner@unisys.com> Signed-off-by:
-
Sameer Wadgaonkar authored
Added a comment to explain polling frequency variation logic in controlvm_periodic_logic() in visorchipset.c. Signed-off-by:
-
Sameer Wadgaonkar authored
staging: unisys: include: renamed structure spar_io_channel_protocol in iochannel.h to match driver namespace Renamed structure spar_io_channel_protocol to visor_io_channel and changed "visor bus" to "visorbus" in a comment in visornic_main.c and visorhba_main.c. Signed-off-by:
-
Sameer Wadgaonkar authored
Renamed #defines * ULTRA_VHBA_CHANNEL_PROTOCOL_SIGNATURE to VISOR_VHBA_CHANNEL_SIGNATURE * ULTRA_VNIC_CHANNEL_PROTOCOL_SIGNATURE to VISOR_VNIC_CHANNEL_SIGNATURE * ULTRA_VSWITCH_CHANNEL_PROTOCOL_SIGNATURE to VISOR_VSWITCH_CHANNEL_SIGNATURE * ULTRA_VHBA_CHANNEL_PROTOCOL_VERSIONID to VISOR_VHBA_CHANNEL_VERSIONID * ULTRA_VNIC_CHANNEL_PROTOCOL_VERSIONID to VISOR_VNIC_CHANNEL_VERSIONID * ULTRA_VSWITCH_CHANNEL_PROTOCOL_VERSIONID to VISOR_VSWITCH_CHANNEL_VERSIONID * SPAR_VHBA_CHANNEL_OK_CLIENT to VISOR_VHBA_CHANNEL_OK_CLIENT * SPAR_VNIC_CHANNEL_OK_CLIENT to VISOR_VNIC_CHANNEL_OK_CLIENT Signed-off-by:
-
Sameer Wadgaonkar authored
Renamed #defines * ULTRA_CHANNEL_PROTOCOL_SIGNATURE to VISOR_CHANNEL_SIGNATURE * SPAR_CHANNEL_SERVER_READY to VISOR_CHANNEL_SERVER_READY * ULTRA_VALID_CHANNELCLI_TRANSITION VISOR_VALID_CHANNELCLI_TRANSITION * ULTRA_CLIERRORBOOT_THROTTLEMSG_DISABLED to VISOR_CLIERRORBOOT_THROTTLEMSG_DISABLED * ULTRA_CLIERRORBOOT_THROTTLEMSG_NOTATTACHED to VISOR_CLIERRORBOOT_THROTTLEMSG_NOTATTACHED * ULTRA_CLIERRORBOOT_THROTTLEMSG_BUSY to VISOR_CLIERRORBOOT_THROTTLEMSG_BUSY * ULTRA_IO_DRIVER_ENABLES_INTS to VISOR_DRIVER_ENABLES_INTS * ULTRA_IO_CHANNEL_IS_POLLING to VISOR_CHANNEL_IS_POLLING * ULTRA_IO_IOVM_IS_OK_WITH_DRIVER_DISABLING_INTS to VISOR_IOVM_OK_DRIVER_DISABLING_INTS * ULTRA_IO_DRIVER_DISABLES_INTS to VISOR_DRIVER_DISABLES_INTS * ULTRA_IO_DRIVER_SUPPORTS_ENHANCED_RCVBUF_CHECKING to VISOR_DRIVER_ENHANCED_RCVBUF_CHECKING * ULTRA_CHANNEL_ENABLE_INTS to VISOR_CHANNEL_ENABLE_INTS * SPAR_VHBA_CHANNEL_PROTOCOL_UUID to VISOR_VHBA_CHANNEL_UUID * SPAR_VHBA_CHANNEL_PROTOCOL_UUID_STR to VISOR_VHBA_CHANNEL_UUID_STR * SPAR_VNIC_CHANNEL_PROTOCOL_UUID to VISOR_VNIC_CHANNEL_UUID * SPAR_VNIC_CHANNEL_PROTOCOL_UUID_STR to VISOR_VNIC_CHANNEL_UUID_STR * SPAR_SIOVM_UUID to VISOR_SIOVM_UUID Signed-off-by:
-
