- 08 Sep, 2015 2 commits
-
-
Julien Grall authored
The function device_get_mac_address is trying different property names in order to get the mac address. To check the return value, the variable addr (which contain the buffer pass by the caller) will be re-used. This means that if the previous property is not found, the next property will be read using a NULL buffer. Therefore it's only possible to retrieve the mac if node contains a property "mac-address". Fix it by using a temporary buffer for the return value. This has been introduced by commit 4c96b7dc "Add a matching set of device_ functions for determining mac/phy" Signed-off-by: Julien Grall <julien.grall@citrix.com> Cc: Jeremy Linton <jeremy.linton@arm.com> Cc: David S. Miller <davem@davemloft.net> Reviewed-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eugene Shatokhin authored
The race may happen when a device (e.g. YOTA 4G LTE Modem) is unplugged while the system is downloading a large file from the Net. Hardware breakpoints and Kprobes with delays were used to confirm that the race does actually happen. The race is on skb_queue ('next' pointer) between usbnet_stop() and rx_complete(), which, in turn, calls usbnet_bh(). Here is a part of the call stack with the code where the changes to the queue happen. The line numbers are for the kernel 4.1.0: *0 __skb_unlink (skbuff.h:1517) prev->next = next; *1 defer_bh (usbnet.c:430) spin_lock_irqsave(&list->lock, flags); old_state = entry->state; entry->state = state; __skb_unlink(skb, list); spin_unlock(&list->lock); spin_lock(&dev->done.lock); __skb_queue_tail(&dev->done, skb); if (dev->done.qlen == 1) tasklet_schedule(&dev->bh); spin_unlock_irqrestore(&dev->done.lock, flags); *2 rx_complete (usbnet.c:640) state = defer_bh(dev, skb, &dev->rxq, state); At the same time, the following code repeatedly checks if the queue is empty and reads these values concurrently with the above changes: *0 usbnet_terminate_urbs (usbnet.c:765) /* maybe wait for deletions to finish. */ while (!skb_queue_empty(&dev->rxq) && !skb_queue_empty(&dev->txq) && !skb_queue_empty(&dev->done)) { schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS)); set_current_state(TASK_UNINTERRUPTIBLE); netif_dbg(dev, ifdown, dev->net, "waited for %d urb completions\n", temp); } *1 usbnet_stop (usbnet.c:806) if (!(info->flags & FLAG_AVOID_UNLINK_URBS)) usbnet_terminate_urbs(dev); As a result, it is possible, for example, that the skb is removed from dev->rxq by __skb_unlink() before the check "!skb_queue_empty(&dev->rxq)" in usbnet_terminate_urbs() is made. It is also possible in this case that the skb is added to dev->done queue after "!skb_queue_empty(&dev->done)" is checked. So usbnet_terminate_urbs() may stop waiting and return while dev->done queue still has an item. Locking in defer_bh() and usbnet_terminate_urbs() was revisited to avoid this race. Signed-off-by: Eugene Shatokhin <eugene.shatokhin@rosalab.ru> Reviewed-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Sep, 2015 8 commits
-
-
françois romieu authored
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function ‘init_one’: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:4579:8: warning: ‘chip’ may be used uninitialized in this function [-Wmaybe-uninitialized] chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev); ^ drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:4571:11: note: ‘chip’ was declared here int ver, chip; ^ Fixes: d86bd29e ("cxgb4/cxgb4vf: read the correct bits of PL Who Am I register") Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
I've noticed that fixed_phy_register() ignores its 'irq' parameter instead of passing it to fixed_phy_add(). Luckily, fixed_phy_register() seems to always be called with PHY_POLL for 'irq'... :-) Fixes: a7595121 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Stringer authored
There's no particular desire to have conntrack action support in Open vSwitch as an independently configurable bit, rather just to ensure there is not a hard dependency. This exposed option doesn't accurately reflect the conntrack dependency when enabled, so simplify this by removing the option. Compile the support if NF_CONNTRACK is enabled. Fixes: 7f8a436e ("openvswitch: Add conntrack action") Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The Marvell 88E6171 switch is in the 88E6351 family, which supports 802.1Q, thus add support from the generic mv88e6xxx functions. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== For the first round of fixes, we have this: * fix for the sizeof() pointer type issue * a fix for regulatory getting into a restore loop * a fix for rfkill global 'all' state, it needs to be stored everywhere to apply correctly to new rfkill instances * properly refuse CQM RSSI when it cannot actually be used * protect HT TDLS traffic properly in non-HT networks * don't incorrectly advertise 80 MHz support when not allowed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
If NO_DMA=y: ERROR: "dma_alloc_coherent" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_free_coherent" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_unmap_single" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_map_page" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_mapping_error" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! ERROR: "dma_map_single" [drivers/net/ethernet/synopsys/dwc_eth_qos.ko] undefined! Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
drivers/net/vxlan.c: In function ‘vxlan_udp_encap_recv’: drivers/net/vxlan.c:1226: warning: ‘info’ may be used uninitialized in this function While this warning is a false positive, it can be killed easily by getting rid of the pointer intermediary and referring directly to the ip_tunnel_info structure. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Jiri Benc <jbenc@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
net/usb/lan78xx.c: In function ‘lan78xx_link_reset’: net/usb/lan78xx.c:1107: warning: comparison is always false due to limited range of data type net/usb/lan78xx.c:1111: warning: comparison is always false due to limited range of data type Assigning return values that can be negative error codes to "u16" variables makes them positive, ignoring the errors. Hence use "int" instead. Drop the "unlikely"s (unlikely considered harmful) and propagate the actual error values instead of overriding them to -EIO while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Sep, 2015 7 commits
-
-
Sowmini Varadhan authored
Only return a conn if the rds_conn_net(conn) matches the struct net passed to rds_conn_lookup(). Fixes: 467fa153 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maciej S. Szmigiero authored
If fec MDIO write method succeeds its return value comes from call to pm_runtime_get_sync(). But pm_runtime_get_sync() can also return 1. In case of Micrel KSZ9031 PHY this value will then be returned along the call chain of phy_write() -> ksz9031_extended_write() -> ksz9031_center_flp_timing() -> ksz9031_config_init() -> phy_init_hw() -> phy_attach_direct() -> phy_connect_direct(). Then phy_connect() will cast it into a pointer using ERR_PTR(), which then fec_enet_mii_probe() will try to dereference resulting in an oops. Fix it by normalizing return value of pm_runtime_get_sync() to be zero if positive in MDIO write method. Fixes: 8fff755e ("net: fec: Ensure clocks are enabled while using mdio bus") Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
switchdev_port_fdb_dump is used as .ndo_fdb_dump. Its return value is idx, so we cannot return errval. Fixes: 45d4122c ("switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: Scott Feldman<sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
The be_cmd_rx_filter() routine sends a non-embedded cmd to the FW and used a pre-allocated dma memory to hold the cmd payload. This worked fine when this cmd was synchronous. This cmd was changed to asynchronous mode by the commit 8af65c2f("make the RX_FILTER command asynchronous"). So now when there are two quick invocations of this cmd, the 2nd request may end up overwriting the first request, causing FW cmd corruption. This patch reverts the offending commit and hence fixes the regression. Fixes: 8af65c2f("be2net: make the RX_FILTER command asynchronous") Signed-off-by: Sathya Perla <sathya.perla@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Conflicts: include/net/netfilter/nf_conntrack.h The conflict was an overlap between changing the type of the zone argument to nf_ct_tmpl_alloc() whilst exporting nf_ct_tmpl_free. Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net, they are: 1) Oneliner to restore maps in nf_tables since we support addressing registers at 32 bits level. 2) Restore previous default behaviour in bridge netfilter when CONFIG_IPV6=n, oneliner from Bernhard Thaler. 3) Out of bound access in ipset hash:net* set types, reported by Dave Jones' KASan utility, patch from Jozsef Kadlecsik. 4) Fix ipset compilation with gcc 4.4.7 related to C99 initialization of unnamed unions, patch from Elad Raz. 5) Add a workaround to address inconsistent endianess in the res_id field of nfnetlink batch messages, reported by Florian Westphal. 6) Fix error paths of CT/synproxy since the conntrack template was moved to use kmalloc, patch from Daniel Borkmann. All of them look good to me to reach 4.2, I can route this to -stable myself too, just let me know what you prefer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudip Mukherjee authored
dev_get_by_name() will increment the usage count if the matching device is found. But we were not decrementing the count if we have got the device and the device is non-active. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Laing authored
In the IPv6 multicast routing code the mrt_lock was not being released correctly in the MFC iterator, as a result adding or deleting a MIF would cause a hang because the mrt_lock could not be acquired. This fix is a copy of the code for the IPv4 case and ensures that the lock is released correctly. Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Sep, 2015 6 commits
-
-
Johannes Berg authored
When beacon filtering is enabled the mac80211 software implementation for RSSI CQM cannot work as beacons will not be available. Rather than accepting such a configuration without proper effect, reject it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Arik Nemtsov authored
Currently if 80MHz channels are not allowed for use, the VHT IE is not included in the probe request for an AP. This is not good enough if the AP is configured with the wrong regulatory and supports VHT even where prohibited or in TDLS scenarios. Mark the ifmgd with the DISABLE_VHT flag for the misbehaving-AP case, and unset VHT support from the peer-station entry for the TDLS case. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Maciej S. Szmigiero authored
restore_regulatory_settings() should restore alpha2 as computed in restore_alpha2(), not raw user_alpha2 to behave as described in the comment just above that code. This fixes endless loop of calling CRDA for "00" and "97" countries after resume from suspend on my laptop. Looks like others had the same problem, too: http://ath9k-devel.ath9k.narkive.com/knY5W6St/ath9k-and-crda-messages-in-logs https://bugs.launchpad.net/ubuntu/+source/linux/+bug/899335 https://forum.porteus.org/viewtopic.php?t=4975&p=36436 https://forums.opensuse.org/showthread.php/483356-Authentication-Regulatory-Domain-issues-ath5k-12-2Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
João Paulo Rechi Vita authored
When switching the state of all RFKill switches of type all we need to replicate the RFKILL_TYPE_ALL global state to all the other types global state, so it is used to initialize persistent RFKill switches on register. Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Avri Altman authored
HT TDLS traffic should be protected in a non-HT BSS to avoid collisions. Therefore, when TDLS peers join/leave, check if protection is (now) needed and set the ht_operation_mode of the virtual interface according to the HT capabilities of the TDLS peer(s). This works because a non-HT BSS connection never sets (or otherwise uses) the ht_operation_mode; it just means that drivers must be aware that this field applies to all HT traffic for this virtual interface, not just the traffic within the BSS. Document that. Signed-off-by: Avri Altman <avri.altman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Thierry Reding authored
The rate_control_cap_mask() function takes a parameter mcs_mask, which GCC will take to be u8 * even though it was declared with a fixed size. This causes the following warning: net/mac80211/rate.c: In function 'rate_control_cap_mask': net/mac80211/rate.c:719:25: warning: 'sizeof' on array function parameter 'mcs_mask' will return size of 'u8 * {aka unsigned char *}' [-Wsizeof-array-argument] for (i = 0; i < sizeof(mcs_mask); i++) ^ net/mac80211/rate.c:684:10: note: declared here u8 mcs_mask[IEEE80211_HT_MCS_MASK_LEN], ^ This can be easily fixed by using the IEEE80211_HT_MCS_MASK_LEN directly within the loop condition. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 03 Sep, 2015 5 commits
-
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== couple of sctp fixes for 0ca50d12 These are two fixes for sctp after my patch on 0ca50d12 ("sctp: fix src address selection if using secondary addresses") The first, fix a dst leak on those it decided to skip. The second, adds the fallback on src selection that Vlad had asked about. Unfortunatelly a lot of ipvs setups relies on the old behavior and I don't see a better fix for it. Please consider both to -stable tree. ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Commit 0ca50d12 added a restriction that the address must belong to the output interface, so that sctp will use the right interface even when using secondary addresses. But it breaks IPVS setups, on which people is used to attach VIP addresses to loopback interface on real servers. It's preferred to attach to the interface actually in use, but it's a very common setup and that used to work. This patch then saves the first routing good result, even if it would be going out through an interface that doesn't have that address. If no better hit found, it's then used. This effectively restores the original behavior if no better interface could be found. Fixes: 0ca50d12 ("sctp: fix src address selection if using secondary addresses") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Commit 0ca50d12 failed to release the reference to dst entries that it decided to skip. Fixes: 0ca50d12 ("sctp: fix src address selection if using secondary addresses") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Atsushi Nemoto authored
tse_poll() calls __napi_complete() with irq enabled. This leads napi poll_list corruption and may stop all napi drivers working. Use napi_complete() instead of __napi_complete(). Signed-off-by: Atsushi Nemoto <nemoto@toshiba-tops.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
-
- 02 Sep, 2015 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device mapper update from Mike Snitzer: - a couple small cleanups in dm-cache, dm-verity, persistent-data's dm-btree, and DM core. - a 4.1-stable fix for dm-cache that fixes the leaking of deferred bio prison cells - a 4.2-stable fix that adds feature reporting for the dm-stats features added in 4.2 - improve DM-snapshot to not invalidate the on-disk snapshot if snapshot device write overflow occurs; but a write overflow triggered through the origin device will still invalidate the snapshot. - optimize DM-thinp's async discard submission a bit now that late bio splitting has been included in block core. - switch DM-cache's SMQ policy lock from using a mutex to a spinlock; improves performance on very low latency devices (eg. NVMe SSD). - document DM RAID 4/5/6's discard support [ I did not pull the slab changes, which weren't appropriate for this tree, and weren't obviously the right thing to do anyway. At the very least they need some discussion and explanation before getting merged. Because not pulling the actual tagged commit but doing a partial pull instead, this merge commit thus also obviously is missing the git signature from the original tag ] * tag 'dm-4.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: fix use after freeing migrations dm cache: small cleanups related to deferred prison cell cleanup dm cache: fix leaking of deferred bio prison cells dm raid: document RAID 4/5/6 discard support dm stats: report precise_timestamps and histogram in @stats_list output dm thin: optimize async discard submission dm snapshot: don't invalidate on-disk image on snapshot write overflow dm: remove unlikely() before IS_ERR() dm: do not override error code returned from dm_get_device() dm: test return value for DM_MAPIO_SUBMITTED dm verity: remove unused mempool dm cache: move wake_waker() from free_migrations() to where it is needed dm btree remove: remove unused function get_nr_entries() dm btree: remove unused "dm_block_t root" parameter in btree_split_sibling() dm cache policy smq: change the mutex to a spinlock
-
Daniel Borkmann authored
Fengguang reported, that some randconfig generated the following linker issue with nf_ct_zone_dflt object involved: [...] CC init/version.o LD init/built-in.o net/built-in.o: In function `ipv4_conntrack_defrag': nf_defrag_ipv4.c:(.text+0x93e95): undefined reference to `nf_ct_zone_dflt' net/built-in.o: In function `ipv6_defrag': nf_defrag_ipv6_hooks.c:(.text+0xe3ffe): undefined reference to `nf_ct_zone_dflt' make: *** [vmlinux] Error 1 Given that configurations exist where we have a built-in part, which is accessing nf_ct_zone_dflt such as the two handlers nf_ct_defrag_user() and nf_ct6_defrag_user(), and a part that configures nf_conntrack as a module, we must move nf_ct_zone_dflt into a fixed, guaranteed built-in area when netfilter is configured in general. Therefore, split the more generic parts into a common header under include/linux/netfilter/ and move nf_ct_zone_dflt into the built-in section that already holds parts related to CONFIG_NF_CONNTRACK in the netfilter core. This fixes the issue on my side. Fixes: 308ac914 ("netfilter: nf_conntrack: push zone object into functions") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
While testing various Kconfig options on another issue, I found that the following one triggers as well on allmodconfig and nf_conntrack disabled: net/ipv4/netfilter/nf_dup_ipv4.c: In function ‘nf_dup_ipv4’: net/ipv4/netfilter/nf_dup_ipv4.c:72:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) [...] net/ipv6/netfilter/nf_dup_ipv6.c: In function ‘nf_dup_ipv6’: net/ipv6/netfilter/nf_dup_ipv6.c:66:20: error: ‘nf_skb_duplicated’ undeclared (first use in this function) if (this_cpu_read(nf_skb_duplicated)) Fix it by including directly the header where it is defined. Fixes: bbde9fc1 ("netfilter: factor out packet duplication for IPv4/IPv6") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
The patch just to re-submit the patch "db3421c1" because the patch "4d494cdc" remove the change. Clear any pending receive interrupt before we process a pending packet. This helps to avoid any spurious interrupts being raised after we have fully cleaned the receive ring, while still allowing an interrupt to be raised if we receive another packet. The position of this is critical: we must do this prior to reading the next packet status to avoid potentially dropping an interrupt when a packet is still pending. Acked-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
We previously register IPPROTO_ROUTING offload under inet6_add_offload(), but in error path, we try to unregister it with inet_del_offload(). This doesn't seem correct, it should actually be inet6_del_offload(), also ipv6_exthdrs_offload_exit() from that commit seems rather incorrect (it also uses rthdr_offload twice), but it got removed entirely later on. Fixes: 3336288a ("ipv6: Switch to using new offload infrastructure.") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull SG updates from Jens Axboe: "This contains a set of scatter-gather related changes/fixes for 4.3: - Add support for limited chaining of sg tables even for architectures that do not set ARCH_HAS_SG_CHAIN. From Christoph. - Add sg chain support to target_rd. From Christoph. - Fixup open coded sg->page_link in crypto/omap-sham. From Christoph. - Fixup open coded crypto ->page_link manipulation. From Dan. - Also from Dan, automated fixup of manual sg_unmark_end() manipulations. - Also from Dan, automated fixup of open coded sg_phys() implementations. - From Robert Jarzmik, addition of an sg table splitting helper that drivers can use" * 'for-4.3/sg' of git://git.kernel.dk/linux-block: lib: scatterlist: add sg splitting function scatterlist: use sg_phys() crypto/omap-sham: remove an open coded access to ->page_link scatterlist: remove open coded sg_unmark_end instances crypto: replace scatterwalk_sg_chain with sg_chain target/rd: always chain S/G list scatterlist: allow limited chaining without ARCH_HAS_SG_CHAIN
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: "On top of the 4.3 core block IO changes, here are the driver related changes for 4.3. Basically just NVMe and nbd this time around: - NVMe: - PRACT PI improvement from Alok Pandey. - Cleanups and improvements on submission queue doorbell and writing, using CMB if available. From Jon Derrick. - From Keith, support for setting queue maximum segments, and reset support. - Also from Jon, fixup of u64 division issue on 32-bit archs and wiring up of the reset support through and ioctl. - Two small cleanups from Matias and Sunad - Various code cleanups and fixes from Markus Pargmann" * 'for-4.3/drivers' of git://git.kernel.dk/linux-block: NVMe: Using PRACT bit to generate and verify PI by controller NVMe:Remove unreachable code in nvme_abort_req NVMe: Add nvme subsystem reset IOCTL NVMe: Add nvme subsystem reset support NVMe: removed unused nn var from nvme_dev_add NVMe: Set queue max segments nbd: flags is a u32 variable nbd: Rename functions for clearness of recv/send path nbd: Change 'disconnect' to be boolean nbd: Add debugfs entries nbd: Remove variable 'pid' nbd: Move clear queue debug message nbd: Remove 'harderror' and propagate error properly nbd: restructure sock_shutdown nbd: sock_shutdown, remove conditional lock nbd: Fix timeout detection nvme: Fixes u64 division which breaks i386 builds NVMe: Use CMB for the IO SQes if available NVMe: Unify SQ entry writing and doorbell ringing
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull core block updates from Jens Axboe: "This first core part of the block IO changes contains: - Cleanup of the bio IO error signaling from Christoph. We used to rely on the uptodate bit and passing around of an error, now we store the error in the bio itself. - Improvement of the above from myself, by shrinking the bio size down again to fit in two cachelines on x86-64. - Revert of the max_hw_sectors cap removal from a revision again, from Jeff Moyer. This caused performance regressions in various tests. Reinstate the limit, bump it to a more reasonable size instead. - Make /sys/block/<dev>/queue/discard_max_bytes writeable, by me. Most devices have huge trim limits, which can cause nasty latencies when deleting files. Enable the admin to configure the size down. We will look into having a more sane default instead of UINT_MAX sectors. - Improvement of the SGP gaps logic from Keith Busch. - Enable the block core to handle arbitrarily sized bios, which enables a nice simplification of bio_add_page() (which is an IO hot path). From Kent. - Improvements to the partition io stats accounting, making it faster. From Ming Lei. - Also from Ming Lei, a basic fixup for overflow of the sysfs pending file in blk-mq, as well as a fix for a blk-mq timeout race condition. - Ming Lin has been carrying Kents above mentioned patches forward for a while, and testing them. Ming also did a few fixes around that. - Sasha Levin found and fixed a use-after-free problem introduced by the bio->bi_error changes from Christoph. - Small blk cgroup cleanup from Viresh Kumar" * 'for-4.3/core' of git://git.kernel.dk/linux-block: (26 commits) blk: Fix bio_io_vec index when checking bvec gaps block: Replace SG_GAPS with new queue limits mask block: bump BLK_DEF_MAX_SECTORS to 2560 Revert "block: remove artifical max_hw_sectors cap" blk-mq: fix race between timeout and freeing request blk-mq: fix buffer overflow when reading sysfs file of 'pending' Documentation: update notes in biovecs about arbitrarily sized bios block: remove bio_get_nr_vecs() fs: use helper bio_add_page() instead of open coding on bi_io_vec block: kill merge_bvec_fn() completely md/raid5: get rid of bio_fits_rdev() md/raid5: split bio for chunk_aligned_read block: remove split code in blkdev_issue_{discard,write_same} btrfs: remove bio splitting and merge_bvec_fn() calls bcache: remove driver private bio splitting code block: simplify bio_add_page() block: make generic_make_request handle arbitrarily sized bios blk-cgroup: Drop unlikely before IS_ERR(_OR_NULL) block: don't access bio->bi_error after bio_put() block: shrink struct bio down to 2 cache lines again ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull first round of SCSI updates from James Bottomley: "This includes one new driver: cxlflash plus the usual grab bag of updates for the major drivers: qla2xxx, ipr, storvsc, pm80xx, hptiop, plus a few assorted fixes. There's another tranch coming, but I want to incubate it another few days in the checkers, plus it includes a mpt2sas separated lifetime fix, which Avago won't get done testing until Friday" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (85 commits) aic94xx: set an error code on failure storvsc: Set the error code correctly in failure conditions storvsc: Allow write_same when host is windows 10 storvsc: use storage protocol version to determine storage capabilities storvsc: use correct defaults for values determined by protocol negotiation storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation. storvsc: Use a single value to track protocol versions storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges. cxlflash: Remove unused variable from queuecommand cxlflash: shift wrapping bug in afu_link_reset() cxlflash: off by one bug in cxlflash_show_port_status() cxlflash: Virtual LUN support cxlflash: Superpipe support cxlflash: Base error recovery support qla2xxx: Update driver version to 8.07.00.26-k qla2xxx: Add pci device id 0x2261. qla2xxx: Fix missing device login retries. qla2xxx: do not clear slot in outstanding cmd array qla2xxx: Remove decrement of sp reference count in abort handler. qla2xxx: Add support to show MPI and PEP FW version for ISP27xx. ...
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull MTD updates from Brian Norris: "SPI NOR: - reduce virtual address space requirements for fsl-quadspi memory map - new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi - add new NOR flash device support - add new driver for NXP SPI Flash Interface (SPIFI) - stop abusing SPI API structs for non-SPI framework - fixup DT table matching for new "jedec,spi-nor" string NAND: - brcmnand: fix big endian MIPS macro usage - denali: refactor to use devres, dev_*() printing, etc. - OMAP ELM: change the module alias to actually be usable - pxa3xx_nand: fixup a few command sequencing issues -- both new and old - race conditions in the IRQ handler status clearing - problems when a bootloader left interrupts pending - config issues when overriding the bootloader configuration - new flash device support - sunxi_nand: - optimize timing configuration by calculation, rather than fixed fail-safe values - use EDO setting from ONFI - r852: fix compiler warnings - davinci: add 4KB page support Core: - oobtest: correct debug print information" * tag 'for-linus-20150901' of git://git.infradead.org/linux-mtd: (42 commits) mtd: mtd_oobtest: Fix the address offset with vary_offset case mtd: blkdevs: fix switch-bool compilation warning mtd: spi-nor: stop (ab)using struct spi_device_id mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table mtd: dataflash: Export OF module alias information nand: pxa3xx: Increase READ_ID buffer and make the size static mtd: nand: pxa3xx-nand: fix random command timeouts mtd: nand: pxa3xx_nand: fix early spurious interrupt mtd: pxa3xx_nand: add a default chunk size mtd: omap_elm: Fix module alias mtd: physmap_of: fix null pointer deference when kzalloc returns null mtd: nettel: do not ignore mtd_device_register() failure in nettel_init() mtd: denali_pci: switch to dev_err() mtd: denali_pci: refactor driver using devres API mtd: denali_pci: use module_pci_driver() macro mtd: denali: hide core part from user in Kconfig mtd: spi-nor: add Spansion S25FL204K support mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI) doc: dt: add documentation for nxp,lpc1773-spifi ...
-
Paul Durrant authored
Xen's PV network protocol includes messages to add/remove ethernet multicast addresses to/from a filter list in the backend. This allows the frontend to request the backend only forward multicast packets which are of interest thus preventing unnecessary noise on the shared ring. The canonical netif header in git://xenbits.xen.org/xen.git specifies the message format (two more XEN_NETIF_EXTRA_TYPEs) so the minimal necessary changes have been pulled into include/xen/interface/io/netif.h. To prevent the frontend from extending the multicast filter list arbitrarily a limit (XEN_NETBK_MCAST_MAX) has been set to 64 entries. This limit is not specified by the protocol and so may change in future. If the limit is reached then the next XEN_NETIF_EXTRA_TYPE_MCAST_ADD sent by the frontend will be failed with NETIF_RSP_ERROR. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
Commit a5597008 ("phy: fixed_phy: Add gpio to determine link up/down.") added a new argument to fixed_phy_register(), but missed to update bgmac driver, causing the following build failure: drivers/net/ethernet/broadcom/bgmac.c:1450:2: error: too few arguments to function 'fixed_phy_register' Add the missing argument. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-