- 09 Jul, 2018 1 commit
-
-
Arnd Bergmann authored
Without this, we get link errors during randconfig build: drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa0): undefined reference to `drm_atomic_helper_check' drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa8): undefined reference to `drm_atomic_helper_commit' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x0): undefined reference to `drm_atomic_helper_update_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x8): undefined reference to `drm_atomic_helper_disable_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x18): undefined reference to `drm_atomic_helper_plane_reset' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x28): undefined reference to `drm_atomic_helper_plane_duplicate_state' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x30): undefined reference to `drm_atomic_helper_plane_destroy_state' drivers/gpu/drm/vkms/vkms_output.o:(.rodata+0x1c0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x40): undefined reference to `drm_atomic_helper_crtc_reset' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x70): undefined reference to `drm_atomic_helper_set_config' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x78): undefined reference to `drm_atomic_helper_page_flip' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x90): undefined reference to `drm_atomic_helper_crtc_duplicate_state' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x98): undefined reference to `drm_atomic_helper_crtc_destroy_state' Fixes: 854502fa ("drm/vkms: Add basic CRTC initialization") Fixes: 1c7c5fd9 ("drm/vkms: Introduce basic VKMS driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180709154901.1989316-1-arnd@arndb.de
-
- 07 Jul, 2018 9 commits
-
-
Boris Brezillon authored
The transposer block is providing support for mem-to-mem composition, which is exposed as a drm_writeback connector in DRM. Add a driver to support this feature. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-9-boris.brezillon@bootlin.com
-
Boris Brezillon authored
Mimic what is done in drm_atomic_commit_tail() and call drm_atomic_helper_fake_vblank() so that VBLANK events are faked when the drm_crtc_state.no_vblank is true. Will be needed when we'll add support for the transposer block. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
-
Boris Brezillon authored
Now that we have a way to fake VBLANK events when requested by the CRTC hook it up to the generic commit_tail() helpers. Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com> Reviewed-by:
-
Boris Brezillon authored
In some cases CRTCs are active but are not able to generating events, at least not at every frame at it's expected to. This is typically the case when the CRTC is feeding a writeback connector that has no job queued. In this situation the CRTC is usually stopped until a new job is queued, and this can lead to timeouts when part of the pipeline is updated but no new jobs are queued to the active writeback connector. In order to solve that, we add a ->no_vblank flag to drm_crtc_state and ask the CRTC drivers to set it to true when they know they're not able to generate VBLANK events. The core drm_atomic_helper_fake_vblank() helper can then be used to fake VBLANKs at commit time. Signed-off-by:
-
Boris Brezillon authored
drm_atomic_helper_wait_for_vblanks() assumes the CRTC will continuously generate VBLANK events and the vblank counter will keep increasing. While this work for a regular pipeline, it doesn't when you have the CRTC is feeding the transposer block, because this block works in oneshot mode, and, by the time we reach drm_atomic_helper_wait_for_vblanks() the only VBLANK event might have already been sent and the VBLANK counter will stay unchanged, thus triggering a timeout. Luckily, we can replace the drm_atomic_helper_wait_for_vblanks() call by drm_atomic_helper_wait_for_flip_done() because the only thing we want to check when calling drm_atomic_helper_wait_for_vblanks() from vc4_atomic_complete_commit() is that new FBs are in use and the old ones can be safely released. Signed-off-by:
-
Boris Brezillon authored
Not all writeback connector implementations might want to commit things from the connector driver. Some, like the malidp driver, commit things from their main commit_tail() function, and would rather not have to implement a dummy hook for drm_connector_helper_funcs.atomic_commit(). Make this function optional and reflect this fact in the doc. Signed-off-by:
-
Boris Brezillon authored
Other atomic hooks are passed state objects, let's change this one to be consistent. Signed-off-by:
-
Boris Brezillon authored
Use container_of() instead of type casting so that it keeps working even if base is moved inside the drm_writeback_connector struct. Signed-off-by:
-
Boris Brezillon authored
Fix the bullet list declaration in the overview section. Signed-off-by:
-
- 06 Jul, 2018 7 commits
-
-
Gustavo Padovan authored
Pull in the malidp writeback implementation for further work on writeback in drm-misc-next. Signed-off-by:Gustavo Padovan <gustavo.padovan@collabora.com>
-
Maarten Lankhorst authored
This reduces the amount of spam when you debug a CRC reading program. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [mlankhorst: Change bool overflow to was_overflow (Ville)] Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180418125121.72081-1-maarten.lankhorst@linux.intel.com
-
Yannick Fertre authored
Reset must be properly assert before deassert. This is important if there is an early boot splash screen before the kernel start up. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@st.com> Tested-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1530271355-5608-1-git-send-email-yannick.fertre@st.com
-
Yannick Fertre authored
Filter the requested mode pixel clock frequency according to the pad maximum supported frequency. Signed-off-by:
-
Benjamin Gaignard authored
When dumping plane state print normalized zpos value as done for the other plane state fields. Signed-off-by:
-
git://linux-arm.org/linux-ldDave Airlie authored
"mali-dp driver changes for drm-next, includes the driver implementation for writeback, improvements for power management handling in the driver and a debugfs entry for reporting possible internal errors. Please pull at your earliest convenience. Boris Brezillon is also interested in this pull as he is going to change slightly the parameter for the writeback connector's atomic_commit() and he needs to fix the mali-dp driver in his series." Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705144408.GH15340@e110455-lin.cambridge.arm.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.19: UAPI Changes: v3d: add fourcc modicfier for fourcc for the Broadcom UIF format (Eric Anholt) Cross-subsystem Changes: console/fbcon: Add support for deferred console takeover (Hans de Goede) Core Changes: dma-fence clean up, improvements and docs (Daniel Vetter) add mask function for crtc, plane, encoder and connector DRM objects(Ville Syrjälä) Driver Changes: pl111: add Nomadik LCDC variant (Linus Walleij) Signed-off-by:
-
- 05 Jul, 2018 23 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
A patchset worked out together with Peter Zijlstra. Ingo is OK with taking it through the DRM tree: This is a small fallout from a work to allow batching WW mutex locks and unlocks. Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to "Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested here is to implement also the "Wound-Wait" algorithm as a per-WW-class choice, as it has advantages in some cases. See for example http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html Now Wound-Wait is a preemptive algorithm, and the preemption is implemented using a lazy scheme: If a wounded transaction is about to go to sleep on a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock prevention. Since with WW mutexes we also require the aborted transaction to sleep waiting to lock the WW mutex it was aborted on, this choice also provides a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first WW mutex lock after the transaction was wounded whether the WW mutex was contended or not, the transaction might frequently be restarted without a wait, which is far from optimal. Note also that with the lazy preemption scheme, contrary to Wait-Die there will be no rollbacks on lock contention of locks held by a transaction that has completed its locking sequence. The modeset locks are then changed from Wait-Die to Wound-Wait since the typical locking pattern of those locks very well matches the criterion for a substantial reduction in the number of rollbacks. For reservation objects, the benefit is more unclear at this point and they remain using Wait-Die. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for 4.19 * Workaround for DRA7 errata i932 * Fix mm_list locking * Cleanups Signed-off-by:
-
Ville Syrjälä authored
Using += to set the bits in a mask looks funny. It works in this case because we never set the same bit twice. But let's switch to |= to make this look more regular. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Eric Anholt authored
Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch>
-
Eric Anholt authored
This was a failure of "git add" on my part -- we already referenced the doc from drivers.rst. Signed-off-by:
-
Eric Anholt authored
The dma-fence core as of commit 418cc6ca ("dma-fence: Make ->wait callback optional") provides appropriate defaults for these methods. Signed-off-by:
-
Eric Anholt authored
GTF-GLES2.gtf.GL.acos.acos_float_vert_xvary submits jobs that take 4 seconds at maximum resolution, but we still want to reset quickly if a job is really hung. Sample the CL's current address and the return address (since we call into tile lists repeatedly) and if either has changed then assume we've made progress. Signed-off-by:
-
Souptick Joarder authored
Instead of converting an errno into a vm_fault_t ourselves, use vmf_insert_mixed() which returns a vm_fault_t directly. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
Matthew Wilcox <willy@infradead.org>
-
Ayan Kumar Halder authored
malidp_pm_suspend_late checks if the runtime status is not suspended and if so, invokes malidp_runtime_pm_suspend which disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. The difference between suspend() and suspend_late() is as follows:- 1. suspend() makes the device quiescent. In our case, we invoke the DRM helper which disables the CRTC. This would have invoked runtime pm suspend but the system suspend process disables runtime pm. 2. suspend_late() It continues the suspend operations of the drm device which was started by suspend(). In our case, it performs the same functionality as runtime_suspend(). The complimentary functions are resume() and resume_early(). In the case of resume_early(), we invoke malidp_runtime_pm_resume() which enables the clocks and the interrupts. It sets the runtime status as active. If the device was in runtime suspend mode before system suspend was called, pm_runtime_work() will put the device back in runtime suspended mode( after the complete system has been resumed). Signed-off-by:
Ayan Kumar Halder <ayan.halder@arm.com> Acked-by:
-
Ayan Kumar Halder authored
One needs to store the value of the OUTPUT_DEPTH that one has parsed from device tree, so that it can be restored on system resume. This value is set in the modeset function as this gets reset when the system suspends. Signed-off-by:
-
Ayan Kumar Halder authored
Display and scaling engine interrupts need to be disabled when the runtime pm invokes malidp_runtime_pm_suspend(). Conversely, they need to be enabled in malidp_runtime_pm_resume(). This patch depends on: https://lkml.org/lkml/2017/5/15/695Reported-by:
Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com> Signed-off-by:
-
Ayan Kumar Halder authored
Malidp uses two interrupts ie 1. se_irq - used for memory writeback. and 2. de_irq - used for display output. Extract the hardware initialization part from malidp interrupt registration ie (malidp_de_irq_init()/ malidp_se_irq_init()) into a separate function (ie malidp_de_irq_hw_init()/malidp_se_irq_hw_init()) which will be later invoked from runtime_pm_resume function when it needs to re-enable the interrupts. Signed-off-by:
-
Ayan Kumar Halder authored
Malidp uses two interrupts ie 1. se_irq - used for memory writeback. and 2. de_irq - used for display output. 'struct drm_device' is being replaced with 'struct malidp_hw_device' as the function argument. The reason being the dependency of malidp_de_irq_fini on 'struct drm_device' needs to be removed so as to enable it to call from functions which receives 'struct malidp_hw_device' as argument. Furthermore, there is no way to retrieve 'struct drm_device' from 'struct malidp_hw_device'. Signed-off-by:
-
Alexandru Gheorghe authored
Status register contains a lot of bits for reporting internal errors inside Mali DP. Currently, we just silently ignore all of the errors, that doesn't help when we are investigating different bugs, especially on the FPGA models which have a lot of constraints, so we could easily end up in AXI or underrun errors. Add a new file called debug that contains an aggregate of the errors reported by the Mali DP hardware. E.g: [root@alarm ~]# cat /sys/kernel/debug/dri/1/debug [DE] num_errors : 167 [DE] last_error_status : 0x00000001 [DE] last_error_vblank : 385 [SE] num_errors : 3 [SE] last_error_status : 0x00e23001 [SE] last_error_vblank : 201 Changes since v2: - Add lock to protect the errors stats. - Add possibility to reset the error stats by writing anything to the debug file. Signed-off-by:
-
Liviu Dudau authored
Mali DP500 operates in continuous writeback mode (writes frame content until stopped) and it needs special handling in order to behave like a one-shot writeback engine. The original state machine added for DP500 was a bit fragile, as it did not handle correctly cases where a new atomic commit was in progress when the SE IRQ happens and it would commit some partial updates. Improve the handling by adding a parameter to the set_config_valid() function to clear the config valid bit in hardware before starting a new commit and by introducing a MW_RESTART state in the writeback state machine to cater for the case where a new writeback commit gets submitted while the last one is still being active. Reported-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
-
Brian Starkey authored
Mali-DP has a memory writeback engine which can be used to write the composition result to a memory buffer. Expose this functionality as a DRM writeback connector on supported hardware. Changes since v1: Daniel Vetter: - Don't require a modeset when writeback routing changes - Make writeback connector always disconnected Changes since v2: - Rebase onto new drm_writeback_connector - Add reset callback, allocating subclassed state Daniel Vetter: - Squash out-fence support into this commit Gustavo Padovan: - Don't signal fence directly from driver (and drop malidp_mw_job) Changes since v3: - Modifications to fit with Mali-DP commit tail changes Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
-
Liviu Dudau authored
Annotate the pixel format matrix for DP500 with the memory-write flag for formats that are supported by the SE memwrite engine. Reviewed-by:
-
Liviu Dudau authored
Mali DP500 behaves differently from the rest of the Mali DP IP, in that it does not have a one-shot mode and keeps writing the content of the current frame to the provided memory area until stopped. As a way of emulating the one-shot behaviour, we are going to use the CVAL interrupt that is being raised at the start of each frame, during prefetch phase, to act as End-of-Write signal, but with a twist: we are going to disable the memory write engine right after we're notified that it has been enabled, using the knowledge that the bit controlling the enabling will only be acted upon on the next vblank/prefetch. CVAL interrupt will fire durint the next prefetch phase every time the global CVAL bit gets set, so we need a state byte to track the memory write enabling. We also need to pay attention during the disabling of the memory write engine as that requires the CVAL bit to be set in the control register, but we don't want to do that during an atomic commit, as it will write into the hardware a partial state. Reviewed-by:
-
Brian Starkey authored
Add a layer bit for the SE memory-write, and add it to the pixel format matrix for DP550/DP650. Signed-off-by:
-
Liviu Dudau authored
Mali-DP display processors are able to write the composition result to a memory buffer via the SE. Add entry points in the HAL for enabling/disabling this feature, and implement support for it on DP650 and DP550. DP500 acts differently and so is omitted from this change. Changes since v3: - Fix missing vsync interrupt for DP550 Signed-off-by:
-
Ville Syrjälä authored
Use drm_connector_has_possible_encoder() for checking whether the encoder has an associated connector. v2: Replace the drm_for_each_connector_encoder_ids() loop with a simple drm_connector_has_possible_encoder() call Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:Jyri Sarha <jsarha@ti.com>
-
Ville Syrjälä authored
Use drm_connector_has_possible_encoder() for checking whether the encoder has an associated connector. v2: Replace the drm_for_each_connector_encoder_ids() loop with a simple drm_connector_has_possible_encoder() call Cc: Rob Clark <robdclark@gmail.com> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: -
Ville Syrjälä authored
Add a small helper for checking whether a connector and encoder are associated with each other. Signed-off-by:
-
