- 07 Jun, 2017 17 commits
-
-
Jakub Kicinski authored
Out of the three stages of ifup/ifdown (allocate, configure, start) - this commit prepares the configuration stage for working with control vNICs. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
vNICs used for sending and receiving control messages shouldn't really have a netdev. Add the ability to initialize vNICs for netdev-less operation. Signed-off-by:
-
Jakub Kicinski authored
We want to be able to inspect the state of descriptor rings of the control vNIC, so it will use the same interface as data vNICs. Make sure the code doesn't use netdevs to determine state of the rings and names things appropriately. Signed-off-by:
-
Jakub Kicinski authored
To be able to reuse print macros easily with control vNICs make the macros check if netdev pointer is populated and use dev_* print functions otherwise. Signed-off-by:
-
Jakub Kicinski authored
Move nfp_net_vecs_init() after all datapath functions. We will need to init poll() callbacks from this function soon. No functional changes. Signed-off-by:
-
Jakub Kicinski authored
On the close path reuse the ring free helpers introduced for runtime reconfiguration. Signed-off-by:
-
Jakub Kicinski authored
Our open/close implementations have 3 stages: - allocation/freeing of ring resources, irqs etc., - device config, - device/stack enable (can't fail). Right now all of those stages are placed in separate functions, apart from allocation during open. Fix that. It will make it easier for us to allocate resources for netdev-less vNICs. Because we want to reuse allocation code in netdev-less vNICs leave the netif_set_real_num_[rt]x_queues() calls inside open. Signed-off-by:
-
Jakub Kicinski authored
We will soon reuse parts of .ndo_stop() for clean up after errors in .ndo_open(). Reorder the associated functions to make that possible. No functional changes. Signed-off-by:
-
Andrew Lunn authored
Both the IMX51 and IMX53 datasheet indicates that the MIB counters should be cleared during setup. Otherwise random numbers are returned via ethtool -S. Add a quirk and a function to do this. Tested on an IMX51. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Just some simple overlapping changes in marvell PHY driver and the DSA core code. Signed-off-by: -
David S. Miller authored
Russell King says: ==================== net: Add phylib support for MV88X3310 10G phy This patch series adds support for the Marvell 88x3310 PHY found on the SolidRun Macchiatobin board. The first patch introduces a set of generic Clause 45 PHY helpers that C45 PHY drivers can make use of if they wish. Patch 2 ensures that the Clause 22 aneg_done function will not be called for incompatible Clause 45 PHYs. Patch 3 fixes the aneg restart to be compatible with C45 PHYs - it can currently only cope with C22 PHYs. Patch 4 moves the "gen10g" driver into the Clause 45 code, grouping all core clause 45 code together. Patch 5 adds the phy_interface_t types for XAUI and 10GBase-KR links. As 10GBase-KR appears to be compatible with XFI and SFI, XFI and SFI, I currently see no reason to add XFI and SFI interface modes. There seems to be vendor code out there using these, but they all alias back to the same hardware settings. Patch 6 adds support for the MV88X3310 PHY, which supports both the copper and fiber interfaces. It should be noted that the MV88X3310 automatically switches its MAC facing interface between 10GBase-KR and SGMII depending on the negotiated speed. This was discussed with Florian, and we agreed to update the phy interface mode depending on the properties of the actual link mode to the PHY. v2: - update sysfs-class-net-phydev documentation - avoid genphy_aneg_done for non-C22 PHYs - expand comment about 0x30 constant - add comment about lack of reset - configure driver using MARVELL_10G_PHY ==================== Signed-off-by: -
Russell King authored
Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310). This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only supports Clause 45 accesses. The PHY appears (based on the vendor IDs) to be two different vendors IP, with each devad containing several instances. This PHY driver has only been tested with the RJ45 copper port, fiber port and a Marvell Armada 8040-based ethernet interface. It should be noted that to use the full range of speeds, MAC drivers need to also reconfigure the link mode as per phydev->interface, since the PHY automatically changes its interface mode depending on the negotiated speed. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Russell King authored
XAUI allows XGMII to reach an extended distance by using a XGXS layer at each end of the MAC to PHY link, operating over four Serdes lanes. 10GBASE-KR is a single lane Serdes backplane ethernet connection method with autonegotiation on the link. Some PHYs use this to connect to the ethernet interface at 10G speeds, switching to other connection types when utilising slower speeds. 10GBASE-KR is also used for XFI and SFI to connect to XFP and SFP fiber modules. Signed-off-by:
-
Russell King authored
Move the old 10G genphy support to sit beside the new clause 45 library functions, so all the 10G phy code is together. Reviewed-by:
-
Russell King authored
genphy_restart_aneg() can only restart autonegotiation on clause 22 PHYs. Add a phy_restart_aneg() function which selects between the clause 22 and clause 45 restart functionality depending on the PHY type and whether the Clause 45 PHY supports the Clause 22 register set. Signed-off-by:
-
Russell King authored
Avoid calling genphy_aneg_done() for PHYs that do not implement the Clause 22 register set. Clause 45 PHYs may implement the Clause 22 register set along with the Clause 22 extension MMD. Hence, we can't simply block access to the Clause 22 functions based on the PHY being a Clause 45 PHY. Signed-off-by:
-
Russell King authored
Add generic helpers for 802.3 clause 45 PHYs for >= 10Gbps support. Reviewed-by:
-
- 06 Jun, 2017 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Made TCP congestion control documentation match current reality, from Anmol Sarma. 2) Various build warning and failure fixes from Arnd Bergmann. 3) Fix SKB list leak in ipv6_gso_segment(). 4) Use after free in ravb driver, from Eugeniu Rosca. 5) Don't use udp_poll() in ping protocol driver, from Eric Dumazet. 6) Don't crash in PCI error recovery of cxgb4 driver, from Guilherme Piccoli. 7) _SRC_NAT_DONE_BIT needs to be cleared using atomics, from Liping Zhang. 8) Use after free in vxlan deletion, from Mark Bloch. 9) Fix ordering of NAPI poll enabled in ethoc driver, from Max Filippov. 10) Fix stmmac hangs with TSO, from Niklas Cassel. 11) Fix crash in CALIPSO ipv6, from Richard Haines. 12) Clear nh_flags properly on mpls link up. From Roopa Prabhu. 13) Fix regression in sk_err socket error queue handling, noticed by ping applications. From Soheil Hassas Yeganeh. 14) Update mlx4/mlx5 MAINTAINERS information. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (78 commits) net: stmmac: fix a broken u32 less than zero check net: stmmac: fix completely hung TX when using TSO net: ethoc: enable NAPI before poll may be scheduled net: bridge: fix a null pointer dereference in br_afspec ravb: Fix use-after-free on `ifconfig eth0 down` net/ipv6: Fix CALIPSO causing GPF with datagram support net: stmmac: ensure jumbo_frm error return is correctly checked for -ve value Revert "sit: reload iphdr in ipip6_rcv" i40e/i40evf: proper update of the page_offset field i40e: Fix state flags for bit set and clean operations of PF iwlwifi: fix host command memory leaks iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 iwlwifi: mvm: clear new beacon command template struct iwlwifi: mvm: don't fail when removing a key from an inexisting sta iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 iwlwifi: mvm: fix firmware debug restart recording iwlwifi: tt: move ucode_loaded check under mutex iwlwifi: mvm: support ibss in dqa mode iwlwifi: mvm: Fix command queue number on d0i3 flow iwlwifi: mvm: rs: start using LQ command color ... -
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: 1) Fix TLB context wrap races, from Pavel Tatashin. 2) Cure some gcc-7 build issues. 3) Handle invalid setup_hugepagesz command line values properly, from Liam R Howlett. 4) Copy TSB using the correct address shift for the huge TSB, from Mike Kravetz. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: delete old wrap code sparc64: new context wrap sparc64: add per-cpu mm of secondary contexts sparc64: redefine first version sparc64: combine activate_mm and switch_mm sparc64: reset mm cpumask after wrap sparc/mm/hugepages: Fix setup_hugepagesz for invalid values. sparc: Machine description indices can vary sparc64: mm: fix copy_tsb to correctly copy huge page TSBs arch/sparc: support NR_CPUS = 4096 sparc64: Add __multi3 for gcc 7.x and later. sparc64: Fix build warnings with gcc 7. arch/sparc: increase CONFIG_NODES_SHIFT on SPARC64 to 5 -
David Rientjes authored
GCC explicitly does not warn for unused static inline functions for -Wunused-function. The manual states: Warn whenever a static function is declared but not defined or a non-inline static function is unused. Clang does warn for static inline functions that are unused. It turns out that suppressing the warnings avoids potentially complex #ifdef directives, which also reduces LOC. Suppress the warning for clang. Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
Pavel Tatashin says: ==================== sparc64: context wrap fixes This patch series contains fixes for context wrap: when we are out of context ids, and need to get a new version. It fixes memory corruption issues which happen when more than number of context ids (currently set to 8K) number of processes are started simultaneously, and processes can get a wrong context. sparc64: new context wrap: - contains explanation of new wrap method, and also explanation of races that it solves sparc64: reset mm cpumask after wrap - explains issue of not reseting cpu mask on a wrap ==================== Signed-off-by: -
Pavel Tatashin authored
The old method that is using xcall and softint to get new context id is deleted, as it is replaced by a method of using per_cpu_secondary_mm without xcall to perform the context wrap. Signed-off-by:
Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by:
Bob Picco <bob.picco@oracle.com> Reviewed-by:
Steven Sistare <steven.sistare@oracle.com> Signed-off-by:
-
Pavel Tatashin authored
The current wrap implementation has a race issue: it is called outside of the ctx_alloc_lock, and also does not wait for all CPUs to complete the wrap. This means that a thread can get a new context with a new version and another thread might still be running with the same context. The problem is especially severe on CPUs with shared TLBs, like sun4v. I used the following test to very quickly reproduce the problem: - start over 8K processes (must be more than context IDs) - write and read values at a memory location in every process. Very quickly memory corruptions start happening, and what we read back does not equal what we wrote. Several approaches were explored before settling on this one: Approach 1: Move smp_new_mmu_context_version() inside ctx_alloc_lock, and wait for every process to complete the wrap. (Note: every CPU must WAIT before leaving smp_new_mmu_context_version_client() until every one arrives). This approach ends up with deadlocks, as some threads own locks which other threads are waiting for, and they never receive softint until these threads exit smp_new_mmu_context_version_client(). Since we do not allow the exit, deadlock happens. Approach 2: Handle wrap right during mondo interrupt. Use etrap/rtrap to enter into into C code, and issue new versions to every CPU. This approach adds some overhead to runtime: in switch_mm() we must add some checks to make sure that versions have not changed due to wrap while we were loading the new secondary context. (could be protected by PSTATE_IE but that degrades performance as on M7 and older CPUs as it takes 50 cycles for each access). Also, we still need a global per-cpu array of MMs to know where we need to load new contexts, otherwise we can change context to a thread that is going way (if we received mondo between switch_mm() and switch_to() time). Finally, there are some issues with window registers in rtrap() when context IDs are changed during CPU mondo time. The approach in this patch is the simplest and has almost no impact on runtime. We use the array with mm's where last secondary contexts were loaded onto CPUs and bump their versions to the new generation without changing context IDs. If a new process comes in to get a context ID, it will go through get_new_mmu_context() because of version mismatch. But the running processes do not need to be interrupted. And wrap is quicker as we do not need to xcall and wait for everyone to receive and complete wrap. Signed-off-by:
-
Pavel Tatashin authored
The new wrap is going to use information from this array to figure out mm's that currently have valid secondary contexts setup. Signed-off-by:
-
Pavel Tatashin authored
CTX_FIRST_VERSION defines the first context version, but also it defines first context. This patch redefines it to only include the first context version. Signed-off-by:
-
Pavel Tatashin authored
The only difference between these two functions is that in activate_mm we unconditionally flush context. However, there is no need to keep this difference after fixing a bug where cpumask was not reset on a wrap. So, in this patch we combine these. Signed-off-by:
-
Pavel Tatashin authored
After a wrap (getting a new context version) a process must get a new context id, which means that we would need to flush the context id from the TLB before running for the first time with this ID on every CPU. But, we use mm_cpumask to determine if this process has been running on this CPU before, and this mask is not reset after a wrap. So, there are two possible fixes for this issue: 1. Clear mm cpumask whenever mm gets a new context id 2. Unconditionally flush context every time process is running on a CPU This patch implements the first solution Signed-off-by:
-
Liam R. Howlett authored
hugetlb_bad_size needs to be called on invalid values. Also change the pr_warn to a pr_err to better align with other platforms. Signed-off-by:
Liam R. Howlett <Liam.Howlett@Oracle.com> Signed-off-by:
-
James Clarke authored
VIO devices were being looked up by their index in the machine description node block, but this often varies over time as devices are added and removed. Instead, store the ID and look up using the type, config handle and ID. Signed-off-by:
James Clarke <jrtc27@jrtc27.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112541Signed-off-by:
-
Mike Kravetz authored
When a TSB grows beyond its current capacity, a new TSB is allocated and copy_tsb is called to copy entries from the old TSB to the new. A hash shift based on page size is used to calculate the index of an entry in the TSB. copy_tsb has hard coded PAGE_SHIFT in these calculations. However, for huge page TSBs the value REAL_HPAGE_SHIFT should be used. As a result, when copy_tsb is called for a huge page TSB the entries are placed at the incorrect index in the newly allocated TSB. When doing hardware table walk, the MMU does not match these entries and we end up in the TSB miss handling code. This code will then create and write an entry to the correct index in the TSB. We take a performance hit for the table walk miss and recreation of these entries. Pass a new parameter to copy_tsb that is the page size shift to be used when copying the TSB. Suggested-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by:
-
Jane Chu authored
Linux SPARC64 limits NR_CPUS to 4064 because init_cpu_send_mondo_info() only allocates a single page for NR_CPUS mondo entries. Thus we cannot use all 4096 CPUs on some SPARC platforms. To fix, allocate (2^order) pages where order is set according to the size of cpu_list for possible cpus. Since cpu_list_pa and cpu_mondo_block_pa are not used in asm code, there are no imm13 offsets from the base PA that will break because they can only reach one page. Orabug: 25505750 Signed-off-by:
Jane Chu <jane.chu@oracle.com> Reviewed-by:
Atish Patra <atish.patra@oracle.com> Signed-off-by:
-
Daniel Borkmann authored
Commit fb9a307d ("bpf: Allow CGROUP_SKB eBPF program to access sk_buff") enabled programs of BPF_PROG_TYPE_CGROUP_SKB type to use ld_abs/ind instructions. However, at this point, we cannot use them, since offsets relative to SKF_LL_OFF will end up pointing skb_mac_header(skb) out of bounds since in the egress path it is not yet set at that point in time, but only after __dev_queue_xmit() did a general reset on the mac header. bpf_internal_load_pointer_neg_helper() will then end up reading data from a wrong offset. BPF_PROG_TYPE_CGROUP_SKB programs can use bpf_skb_load_bytes() already to access packet data, which is also more flexible than the insns carried over from cBPF. Fixes: fb9a307d ("bpf: Allow CGROUP_SKB eBPF program to access sk_buff") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Cc: Chenbo Feng <fengc@google.com> Signed-off-by:
-
Colin Ian King authored
The check that queue is less or equal to zero is always true because queue is a u32; queue is decremented and will wrap around and never go -ve. Fix this by making queue an int. Detected by CoverityScan, CID#1428988 ("Unsigned compared against 0") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Niklas Cassel authored
stmmac_tso_allocator can fail to set the Last Descriptor bit on a descriptor that actually was the last descriptor. This happens when the buffer of the last descriptor ends up having a size of exactly TSO_MAX_BUFF_SIZE. When the IP eventually reaches the next last descriptor, which actually has the bit set, the DMA will hang. When the DMA hangs, we get a tx timeout, however, since stmmac does not do a complete reset of the IP in stmmac_tx_timeout, we end up in a state with completely hung TX. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Acked-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
Jason Wang authored
Tun actually expects a symmetric hash for queue selecting to work correctly, otherwise packets belongs to a single flow may be redirected to the wrong queue. So this patch switch to use __skb_get_hash_symmetric(). Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Max Filippov authored
ethoc_reset enables device interrupts, ethoc_interrupt may schedule a NAPI poll before NAPI is enabled in the ethoc_open, which results in device being unable to send or receive anything until it's closed and reopened. In case the device is flooded with ingress packets it may be unable to recover at all. Move napi_enable above ethoc_reset in the ethoc_open to fix that. Fixes: a1702857 ("net: Add support for the OpenCores 10/100 Mbps Ethernet MAC.") Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Reviewed-by:
Tobias Klauser <tklauser@distanz.ch> Reviewed-by:
-
Nikolay Aleksandrov authored
We might call br_afspec() with p == NULL which is a valid use case if the action is on the bridge device itself, but the bridge tunnel code dereferences the p pointer without checking, so check if p is null first. Reported-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Vivien Didelot authored
The register bits used for the frame mode were masked with DSA (0x1) instead of the mask value (0x3) in the 6085 implementation of port_set_frame_mode. Fix this. Fixes: 56995cbc ("net: dsa: mv88e6xxx: Refactor CPU and DSA port setup") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Eugeniu Rosca authored
Commit a47b70ea ("ravb: unmap descriptors when freeing rings") has introduced the issue seen in [1] reproduced on H3ULCB board. Fix this by relocating the RX skb ringbuffer free operation, so that swiotlb page unmapping can be done first. Freeing of aligned TX buffers is not relevant to the issue seen in [1]. Still, reposition TX free calls as well, to have all kfree() operations performed consistently _after_ dma_unmap_*()/dma_free_*(). [1] Console screenshot with the problem reproduced: salvator-x login: root root@salvator-x:~# ifconfig eth0 up Micrel KSZ9031 Gigabit PHY e6800000.ethernet-ffffffff:00: \ attached PHY driver [Micrel KSZ9031 Gigabit PHY] \ (mii_bus:phy_addr=e6800000.ethernet-ffffffff:00, irq=235) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready root@salvator-x:~# root@salvator-x:~# ifconfig eth0 down ================================================================== BUG: KASAN: use-after-free in swiotlb_tbl_unmap_single+0xc4/0x35c Write of size 1538 at addr ffff8006d884f780 by task ifconfig/1649 CPU: 0 PID: 1649 Comm: ifconfig Not tainted 4.12.0-rc4-00004-g112eb072 #32 Hardware name: Renesas H3ULCB board based on r8a7795 (DT) Call trace: [<ffff20000808f11c>] dump_backtrace+0x0/0x3a4 [<ffff20000808f4d4>] show_stack+0x14/0x1c [<ffff20000865970c>] dump_stack+0xf8/0x150 [<ffff20000831f8b0>] print_address_description+0x7c/0x330 [<ffff200008320010>] kasan_report+0x2e0/0x2f4 [<ffff20000831eac0>] check_memory_region+0x20/0x14c [<ffff20000831f054>] memcpy+0x48/0x68 [<ffff20000869ed50>] swiotlb_tbl_unmap_single+0xc4/0x35c [<ffff20000869fcf4>] unmap_single+0x90/0xa4 [<ffff20000869fd14>] swiotlb_unmap_page+0xc/0x14 [<ffff2000080a2974>] __swiotlb_unmap_page+0xcc/0xe4 [<ffff2000088acdb8>] ravb_ring_free+0x514/0x870 [<ffff2000088b25dc>] ravb_close+0x288/0x36c [<ffff200008aaf8c4>] __dev_close_many+0x14c/0x174 [<ffff200008aaf9b4>] __dev_close+0xc8/0x144 [<ffff200008ac2100>] __dev_change_flags+0xd8/0x194 [<ffff200008ac221c>] dev_change_flags+0x60/0xb0 [<ffff200008ba2dec>] devinet_ioctl+0x484/0x9d4 [<ffff200008ba7b78>] inet_ioctl+0x190/0x194 [<ffff200008a78c44>] sock_do_ioctl+0x78/0xa8 [<ffff200008a7a128>] sock_ioctl+0x110/0x3c4 [<ffff200008365a70>] vfs_ioctl+0x90/0xa0 [<ffff200008365dbc>] do_vfs_ioctl+0x148/0xc38 [<ffff2000083668f0>] SyS_ioctl+0x44/0x74 [<ffff200008083770>] el0_svc_naked+0x24/0x28 The buggy address belongs to the page: page:ffff7e001b6213c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x4000000000000000() raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffff7e001b6213e0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8006d884f680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff8006d884f780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8006d884f800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8006d884f880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint root@salvator-x:~# Fixes: a47b70ea ("ravb: unmap descriptors when freeing rings") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== Introduce bpf ID This patch series: 1) Introduce ID for both bpf_prog and bpf_map. 2) Add bpf commands to iterate the prog IDs and map IDs of the system. 3) Add bpf commands to get a prog/map fd from an ID 4) Add bpf command to get prog/map info from a fd. The prog/map info is a jump start in this patchset and it is not meant to be a complete list. They can be extended in the future patches. v3: - I suspect v2 may not have applied cleanly. In particular, patch 1 has conflict with a recent change in struct bpf_prog_aux introduced at a similar time frame: 8726679a ("bpf: teach verifier to track stack depth") v3 should have fixed it. v2: Compiler warning fixes: - Remove lockdep_is_held() usage. Add comment to explain the lock situation instead. - Add static for idr related variables - Add __user to the uattr param in bpf_prog_get_info_by_fd() and bpf_map_get_info_by_fd(). ==================== Signed-off-by:
-
