- 06 Jul, 2015 40 commits
-
-
Hans Verkuil authored
The bytesperline values were wrong for planar formats where bytesperline is the line length for the first plane. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
This ensures that both do the same checks, and simplifies s_fmt_vid_out a bit. Signed-off-by:
-
Hans Verkuil authored
Implement g/s_selection. The v4l2 core will emulate g/s_crop and cropcap on top of g/s_selection. Signed-off-by:
-
Hans Verkuil authored
It was set to a format that wasn't supported. Signed-off-by:
-
Hans Verkuil authored
Video output drivers must support these ioctls. Otherwise applications cannot deduce that these outputs exist and what capabilities they have. Signed-off-by:
-
Hans Verkuil authored
This allows us to drop the use_count and you get free G/S_PRIORITY support. Signed-off-by:
-
Hans Verkuil authored
Fix v4l2-compliance errors due to empty driver and bus_info fields. Signed-off-by:
-
Hans Verkuil authored
Simplify the sh-vou clean up by using devm_* were possible. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/platform/vsp1/vsp1_video.c:517:6: warning: no previous prototype for 'vsp1_pipeline_stopped' [-Wmissing-prototypes] bool vsp1_pipeline_stopped(struct vsp1_pipeline *pipe) ^ Signed-off-by: -
Hans Verkuil authored
Bitrot has set in for this driver and the sh-vou clock was never enabled, since the clock name in clock-sh7724.c was wrong. It should be sh-vou, not sh-vou.0. Signed-off-by:
-
Damian Hobson-Garcia authored
Make sure that there are valid values in the crop rectangle to ensure that the color plane doesn't get shifted when cropping. Since there is no distinction between 12bit and 16bit YUV formats in at the subdev level, use the more restrictive 12bit limits for all YUV formats. Signed-off-by:
Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by:
Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
When stopping the pipeline the driver waits for the pipeline state to be set to VSP1_PIPELINE_STOPPED but fails to lock the pipe irqlock to read the state variable protected by the lock. Fix it. Signed-off-by:
-
Sei Fumizono authored
Fix Suspend-to-RAM so that VSP1 driver continues to work after resuming. In detail, - Fix the judgment of ref count in resuming. - Add stopping VSP1 during suspend. [Refactor the suspend and resume code to lower suspend delay] Signed-off-by:
Sei Fumizono <sei.fumizono.jw@hitachi-solutions.com> Signed-off-by:
Yoshifumi Hosoya <yoshifumi.hosoya.wj@renesas.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
FXA bit of VI6_DPR_mod_ROUTE register starts from 16bit. But VI6_DPR_ROUTE_FXA_MASK is set to become start from 8bit. This fixes shift size for VI6_DPR_ROUTE_FXA_MASK. Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by:
-
Nobuhiro Iwamatsu authored
FP bit of VI6_DPR_mod_ROUTE register is 6bit. But VI6_DPR_ROUTE_FP_MASK is set to 0xFF, this will mask until the reserve bit. This fixes size for VI6_DPR_ROUTE_FP_MASK. Signed-off-by:
-
Nobuhiro Iwamatsu authored
Clipping size bit of VI6_WPFn _HSZCLIP and VI6_WPFn _VSZCLIP register are from 0 bit to 11 bit. But VI6_WPF_SZCLIP_SIZE_MASK is set to 0x1FFF, this will mask until the reserve bits. This fixes size for VI6_WPF_SZCLIP_SIZE_MASK. Signed-off-by:
-
Nicholas Mc Guire authored
API compliance scanning with coccinelle flagged: ./drivers/media/usb/gspca/m5602/m5602_s5k83a.c:180:9-25: WARNING: timeout (100) seems HZ dependent Numeric constants passed to schedule_timeout() make the effective timeout HZ dependent which makes little sense in a polling loop for the cameras rotation state. Fixed up by converting the constant to jiffies with msecs_to_jiffies() Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Dan Carpenter authored
We already know status is negative because of the earlier check so there is no need to check again. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Ricardo Ribalda authored
They are no longer used in old non-control-framework bridge drivers. Reported-by:
-
Prashant Laddha authored
In many cases, refresh rate is not exact integer. In such cases, fraction was lost and it used to print, say, 59 in case of 59.94. Now, capturing the fraction up to 2 decimal places. Signed-off-by:
Prashant Laddha <prladdha@cisco.com> Signed-off-by:
-
Ricardo Ribalda authored
We can simplify the code removing the if(). v4l2_ctr_new sets ctrls->elems to 1 when !ctrl->is_ptr. Signed-off-by:
-
Josh Wu authored
The master clock should be handled by sensor itself. Signed-off-by:
Josh Wu <josh.wu@atmel.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Josh Wu authored
The runtime pm resume/suspend will enable/disable pclk (ISI peripheral clock). We have to call runtime_pm_get_sync()/runtime_pm_put() when we need to access ISI registers. In atmel_isi_probe(), remove the isi disable code as at that moment ISI peripheral clock is not enable yet. Besides, clock_start()/clock_stop() is used to control the mclk, not the ISI peripheral clock. So move this to start[stop]_streaming() function. Signed-off-by:
-
Josh Wu authored
In current code, stop_streaming() will just return if ISI is still working in the codec. But this is incorrect, we need to disable ISI even it is working on the codec, otherwise stop_streaming() will not work as we expected. Signed-off-by:
-
Laurent Pinchart authored
Cropping should be configured on the pipeline subdev nodes, not through the video nodes. Remove crop support on all video nodes. Signed-off-by:
-
Laurent Pinchart authored
Now that the driver doesn't use the non-exported omap4_ctrl_pad_readl and omap4_ctrl_pad_writel functions nothing prevents it from being compiled as a module anymore. Signed-off-by:
-
Sakari Ailus authored
Commit 813f5c0a ("media: Change media device link_notify behaviour") modified the media controller link setup notification API and updated the OMAP3 ISP driver accordingly. As a side effect it introduced a bug by turning power on after setting the link instead of before. This results in sub-devices not being powered down in some cases when they should be. Fix it. Fixes: 813f5c0a [media] media: Change media device link_notify behaviour Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Cc: stable@vger.kernel.org # since v3.10 Signed-off-by:
-
Sakari Ailus authored
The async notifier was registered before the v4l2_device was registered and before the notifier callbacks were set. This could lead to missing the bound() and complete() callbacks and to attempting to spin_lock() and uninitialised spin lock. Also fix unregistering the async notifier in the case of an error --- the function may not fail anymore after the notifier is registered. Fixes: da7f3843 ("[media] omap3isp: Add support for the Device Tree") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Joe Perches authored
Don't use the kernel types in uapi headers. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Hans Verkuil authored
The last CVT standard introduced reduced blanking version 2 which is signaled by a vsync of 8. Log this. Signed-off-by:
-
