- 02 Jul, 2024 14 commits
-
-
Roshan Khatri authored
Codespell reported misspelled fields,suppress,separately and offset in file sh_css_sp.c. This patch fixes the misspellings. Signed-off-by:
Roshan Khatri <topofeverest8848@gmail.com> Link: https://lore.kernel.org/r/20240507052512.7296-1-topofeverest8848@gmail.comReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Roshan Khatri authored
codespell reported misspelled suppress and implicit on ia_css_debug.c. This patch fixes the misspellings. Signed-off-by:
-
Roshan Khatri authored
codespell reported misspelled unchanged in hmm_bo.c at two places. This patch fixes the misspellings. Signed-off-by:
-
Roshan Khatri authored
codespell reported misspelled calculating in ia_css_eed1_8.host.c. This patch fixes the misspellings. Signed-off-by:
-
Roshan Khatri authored
codespell reported misspelled words still and member. This patch fixes misspellings. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err() message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240429075146.1073869-1-colin.i.king@gmail.comReviewed-by:
-
Andy Shevchenko authored
Remove unused GPIO related defines and APIs. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240424210800.1776038-1-andriy.shevchenko@linux.intel.comReviewed-by:
-
Andy Shevchenko authored
Replace COMPILATION_ERROR_IF() by static_assert(). Signed-off-by:
-
Andy Shevchenko authored
Clean up unused macros from math_support.h and replace rarely used by generic ones from Linux kernel headers. Signed-off-by:
-
Hans de Goede authored
The OV5693 the Xiaomi Mipad2 is used as a front facing sensor and as such is connected to CsiPort 0, but the _DSM has CsiPort 1, add a DMI quirk to override the wrong _DSM setting. Signed-off-by:
Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240603132057.255917-5-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Update the TODO list: - Remove comment about adding firmware to linux-firmware this has been done - Add a comment about removing unnecessary / unwanted module parameters Signed-off-by:
-
Hans de Goede authored
The atomisp firmwares have been added to upstream linux-firmware under intel/ipu/ add this prefix to the firmware name passed to request_firmware(). Fall back to the old location if this fails to avoid breaking existing setups. Signed-off-by:
-
Hans de Goede authored
There is no need for the user to be able to specify a different name for the firmware being loaded. Most other kernel drivers do not have this and work fine without it. Drop this unnecessary module parameter. Signed-off-by:
-
Hans de Goede authored
The mipicsi_flag int is completely unused, remove it. Signed-off-by:
-
- 30 Jun, 2024 5 commits
-
-
Dikshita Agarwal authored
There appears to be a possible use after free with vdec_close(). The firmware will add buffer release work to the work queue through HFI callbacks as a normal part of decoding. Randomly closing the decoder device from userspace during normal decoding can incur a read after free for inst. Fix it by cancelling the work in vdec_close. Cc: stable@vger.kernel.org Fixes: af2c3834 ("[media] media: venus: adding core part and helper functions") Signed-off-by:
Dikshita Agarwal <quic_dikshita@quicinc.com> Acked-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
-
Pierre-Hugues Husson authored
Add the missing bits for msm8998 support. Downstream vendor code for reference: https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/ kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998-vidc.dtsi#L42-53 qcom,load-freq-tbl = /* Encoders */ <972000 465000000 0x55555555>, /* 4k UHD @ 30 */ <489600 360000000 0x55555555>, /* 1080p @ 60 */ <244800 186000000 0x55555555>, /* 1080p @ 30 */ <108000 100000000 0x55555555>, /* 720p @ 30 */ /* Decoders */ <1944000 465000000 0xffffffff>, /* 4k UHD @ 60 */ < 972000 360000000 0xffffffff>, /* 4k UHD @ 30 */ < 489600 186000000 0xffffffff>, /* 1080p @ 60 */ < 244800 100000000 0xffffffff>; /* 1080p @ 30 */ Signed-off-by:
Pierre-Hugues Husson <phhusson@freebox.fr> Signed-off-by:
Marc Gonzalez <mgonzalez@freebox.fr> Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by:
-
Marc Gonzalez authored
msm8998 has the same video encode/decode accelerator as msm8996. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Dikshita Agarwal authored
Core dump is generated whenever there is system error reported by firmware. Right now, multiple such dumps are generated if recovery fails in first attempt, since the sys error handler is invoked again for every failed recovery. To avoid it, add conditional check to generate core dump only once during every system error notification from firmware. Signed-off-by:
-
Dikshita Agarwal authored
For scenarios, when source change is followed by VIDIOC_STREAMOFF on output plane, driver should discard any queued OUTPUT buffers, which are not decoded or dequeued. Flush with HFI_FLUSH_INPUT does not have any actual impact. So, fix it, by invoking HFI_FLUSH_ALL, which will flush all queued buffers. Fixes: 85872f86 ("media: venus: Mark last capture buffer") Signed-off-by:
Nathan Hebert <nhebert@chromium.org> Reviewed-by:
-
- 29 Jun, 2024 21 commits
-
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/common/videobuf2/videobuf2-dvb.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Acked-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Nils Rothaug authored
Fixes changing the Line Out audio source with the video input on MyGica UTV3 board. Previously, GPIOs were only set in em28xx_set_audio_source(), which only boards with USB audio support reach. Signed-off-by:
Nils Rothaug <nils.rothaug@gmx.de> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Nils Rothaug authored
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card that has analog TV, composite video, and FM radio inputs, an IR remote, and provides audio only as Line Out, but not over USB. Mine is prepared for an FM tuner, but not equipped with one. Support for FM radio is therefore missing. The device contains: - Empia EM2860 USB bridge - Philips SAA7113 video decoder - NXP TDA9801T demodulator - Tena TNF931D-DFDR1 tuner - ST HCF4052 demux, switches input audio to Line Out Signed-off-by:
-
Nils Rothaug authored
Add a binding for the rc-mygica-utv3 keymap Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
-
Nils Rothaug authored
Add keymap for the simple IR (RC-5) remote that comes with the MyGica UTV3 Analog USB2.0 TV Box video capture card. Signed-off-by:
-
Nils Rothaug authored
Tuner ranges were determined by USB capturing the vendor driver of a MyGica UTV3 video capture card. Signed-off-by:
-
Chen Ni authored
Add check for the return value of v4l2_fwnode_endpoint_parse() and return the error if it fails in order to catch the error. Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-mc-common.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/common/uvc.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/i2c/uda1342.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/au8522_decoder.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/dvb-frontends/mb86a16.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/staging/media/atomisp/i2c/atomisp-mt9m114.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/ti/vpe/ti-vpdma.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Jeff Johnson authored
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos-fimc-lite.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos-fimc-is.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/platform/samsung/exynos4-is/exynos4-is-common.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by:
-
Milen Mitkov authored
Decouple the direct calls to VFE's vfe_get/put in the CSID subdev in order to prepare for the introduction of IFE subdev. Also decouple CSID base address from VFE since on the Titan platform CSID register base address resides within VFE's base address. Signed-off-by:
Milen Mitkov <quic_mmitkov@quicinc.com> Signed-off-by:
Gjorgji Rosikopulos <quic_grosikop@quicinc.com> Reviewed-by:
-
Atanas Filipov authored
Split link and register operations. Add dedicated link callback according to SoC identifier. Signed-off-by:
Atanas Filipov <quic_afilipov@quicinc.com> Signed-off-by:
-
Milen Mitkov authored
Split the RAW interface (RDI), the CSID receiver (RX) and test pattern generator (testgen), configurations for CSID on Titan 170 Signed-off-by:
-
Radoslav Tsvetkov authored
Move out the format related helper functions from vfe and video in a separate file. The goal here is to create a format API. Signed-off-by:
Radoslav Tsvetkov <quic_rtsvetko@quicinc.com> Signed-off-by:
-
Radoslav Tsvetkov authored
Following the example of VFE and CSID, attach the CSIPHY formats to the subdevices resources. Signed-off-by:
-
Radoslav Tsvetkov authored
Following the example of VFE, move all formats of the decoder to camss-csid.c and attach them to the subdevices resources. Signed-off-by:
-
Radoslav Tsvetkov authored
Video node formats have direct dependency by the sub-device pad formats. Remove dependency for SoC version and move format definitions in device which creates video node. This commit attaches a struct to the VFE resources that holds format description, so it is much easier to assign them to the video node. No need to use a switch-case. NOTE: The mbus_bpp is used to calculate the clock rates and is different from bpp which is the bits per pixel written to memory. We need to keep both values to not break the calcualtions. Signed-off-by:
-
