Check the that ring we are using for copies is functional
rather than the GFX ring.  On newer asics we use the DMA
ring for bo moves.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Since we are now preserving the cursor across modesets, the cursor could
be left over in console if e.g. X crashed.

v2: add comment about universal plane support
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Stop using the VM mutex for this

v2: fix typo in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The BO_VA contains everything necessary.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Better match what it is actually doing.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's only used for duplicate check and that
can be done on the original as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's only used once after initializing and that
ptr can be calculated from the BO as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Not just the userspace relocs, otherwise we won't wait
for a swapped out page tables to be swapped in again.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It's only needed in radeon_crtc_cursor_set2.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Setting a mode seems to clear the cursor registers, so we need to
re-program them to make sure the cursor is visible.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

some vmware fixes.

* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: (Re)bind shaders to MOBs with the correct offset
  drm/vmwgfx: Fix fence event code
  drm/vmwgfx: Don't use memory accounting for kernel-side fence objects
  drm/vmwgfx: Fix error printout on signals pending

This codepath is mostly hit when rebinding after a backup buffer swapout. It's
amazing that this error hasn't been more obvious but probably the shaders are
not reread from guest memory that often..
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

The commit "vmwgfx: Rework fence event action" introduced a number of bugs
that are fixed with this commit:

a) A forgotten return stateemnt.
b) An if statement with identical branches.

Cc: <stable@vger.kernel.org>
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

Kernel side fence objects are used when unbinding resources and may thus be
created as part of a memory reclaim operation. This might trigger recursive
memory reclaims and result in the kernel running out of stack space.

So a simple way out is to avoid accounting of these fence objects.
In principle this is OK since while user-space can trigger the creation of
such objects, it can't really hold on to them. However, their lifetime is
quite long, so some form of accounting should perhaps be implemented in the
future.

Fixes kernel crashes when running, for example viewperf11 ensight-04 test 3
with low system memory settings.

Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>

The function vmw_master_check() might return -ERESTARTSYS if there is a
signal pending, indicating that the IOCTL should be rerun, potentially from
user-space. At that point we shouldn't print out an error message since that
is not an error condition. In short, avoid bloating the kernel log when a
process refuses to die on SIGTERM.

Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>

The DRM connector's encoder pointer is managed internally by the DRM
core and set to NULL when the DRM connector is disconnected from the
CRTC it was attached to. This results in a NULL pointer dereference in
the HDMI connector functions when trying to call the associated slave
encoder's operations.

Fix this by retrieving the slave encoder pointer from the R-Car
connector structure instead of the DRM connector structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel into drm-next

drm-intel-next-2014-11-21:
- infoframe tracking (for fastboot) from Jesse
- start of the dri1/ums support removal
- vlv forcewake timeout fixes (Imre)
- bunch of patches to polish the rps code (Imre) and improve it on bdw (Tom
  O'Rourke)
- on-demand pinning for execlist contexts
- vlv/chv backlight improvements (Ville)
- gen8+ render ctx w/a work from various people
- skl edp programming (Satheeshakrishna et al.)
- psr docbook (Rodrigo)
- piles of little fixes and improvements all over, as usual

* tag 'drm-intel-next-2014-11-21-fixed' of git://anongit.freedesktop.org/drm-intel: (117 commits)
  drm/i915: Don't pin LRC in GGTT when dumping in debugfs
  drm/i915: Update DRIVER_DATE to 20141121
  drm/i915/g4x: fix g4x infoframe readout
  drm/i915: Only call mod_timer() if not already pending
  drm/i915: Don't rely upon encoder->type for infoframe hw state readout
  drm/i915: remove the IRQs enabled WARN from intel_disable_gt_powersave
  drm/i915: Use ggtt error obj capture helper for gen8 semaphores
  drm/i915: vlv: increase timeout when setting idle GPU freq
  drm/i915: vlv: fix cdclk setting during modeset while suspended
  drm/i915: Dump hdmi pipe_config state
  drm/i915: Gen9 shadowed registers
  drm/i915/skl: Gen9 multi-engine forcewake
  drm/i915: Read power well status before other registers for drpc info
  drm/i915: Pin tiled objects for L-shaped configs
  drm/i915: Update ring freq for full gpu freq range
  drm/i915: change initial rps frequency for gen8
  drm/i915: Keep min freq above floor on HSW/BDW
  drm/i915: Use efficient frequency for HSW/BDW
  drm/i915: Can i915_gem_init_ioctl
  drm/i915: Sanitize ->lastclose
  ...

LRC object does not need to be mapped into the GGTT when dumping. A side-effect
of this patch is that a compiler warning goes away (not checking return value
of i915_gem_obj_ggtt_pin).

v2: Broke out individual context dumping into a new function as the indentation
was getting a bit crazy.  Added notification of contexts with no gem object for
debugging purposes.  Removed unnecessary pin_pages and unpin_pages, replaced
with explicit get_pages for the context object as there may be no backing store
allocated at this time (Comment for get_pages says "Ensure that the associated
pages are gathered from the backing storage and pinned into our object").
Improved error checking - get_pages and get_page are checked for failure.
Signed-off-by: Thomas Daniel <thomas.daniel@intel.com>
[danvet: Align paramter continuation lines properly. Also add some
braces to the nested loops again for readability.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

- Tegra K1 voltage support, and coherency improvements
- GM204 support (modesetting, still waiting on NVIDIA for signed fw to
proceed further), and a lot of bios/i2c/devinit adjustments needed to
support it
- GT21x memory reclocking work
- Various other bits and pieces, most of which are prep-work for a
couple of bigger projects I didn't get finished in time

* 'linux-3.19' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (73 commits)
  drm/nv50/kms: drop requirement that framebuffer bos be contig up-front
  drm/nv50/kms: directly use cursor image from userspace buffer
  drm/nouveau/kms: when pinning display-related buffers, force contig vram
  drm/nouveau: teach nouveau_bo_pin() how to force a contig vram allocation
  drm/nouveau/volt: add support for GK20A
  drm/nouveau/platform: add GPU speedo information to nouveau platform
  drm/nouveau/volt: allow non-bios voltage scaling
  drm/gf100-/gr: return non-fatal error code when fw not present
  drm/nouveau/devinit: bump priv ring timeouts before executing scripts
  drm/nouveau/bios: translate ramcfg strap through M0203
  drm/nouveau/fb: make use of M0203 routines for ram type determination
  drm/nouveau/bios: add parsing of BIT M(v2) +0x03 table
  drm/nouveau/core: allow vbios parsing without knowing chipset type
  drm/nouveau/lib: add null backend
  drm/nouveau/device: store revision
  drm/nouveau/core: add some forgotten subdevs to disable mask
  drm/gk20a/clk: fix max VCO value
  drm/nouveau: we need pin_refcnt for nouveau_bo_placement_set()
  drm/nv50-/kms: add some evo tracing ability for debugging
  drm/nv50/kms: use sclass() instead of trial-and-error
  ...

We'll move them at pin() time if necessary.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Preparation for transition to planes, which use framebuffers for the
cursor image.  We've always done copies from the userspace buffer up
until now for legacy reasons, there's no good reason to do so on the
chipsets this code covers.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We have the ability to move buffers around in the kernel if necessary,
and should probably use it rather than failing if userspace passes us
a non-contig buffer for a plane.

The NOUVEAU_GEM_TILE_NONCONTIG flag from userspace will become a mere
initial placement hint once all the relevant paths have been updated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

The voltage value are calculated by the hardware characterized
result.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For GK20A we need the GPU speedo value to calculate voltage levels.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Move the vbios parsing out of init() and call it conditionally if the
platform has a vbios. Non-vbios platforms can use the ctor() to init the
data structures.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This allows the module to load without acceleration.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

A machine has been spotted where the ramcfg strap is "8", and the ramcfg
xlat table goes 0-7,0-7, resulting in us selecting config 0 for memory
items.  On this particular system, config "8" is available and supposed
to be used.  It appears that starting from GT21x (where Mv2 appears),
we're supposed to use the value in this table instead.

One concern here is that not all the places we currently use ramcfg xlat
are supposed to be treated the same now.  The strap xlat table wasn't
removed from the vbios either, presumably for some kind of good reason.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

We only support one kind of matching here (ramcfg strap), but it appears
alternate methods are possible.  I wrote a tool to scan our vbios repo
for other types, but did not see any used.  Hopefully this means there
aren't any in the wild that will now break.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For the moment, just used to speed up vbios-only testing.  Have some
ideas for extending in the future.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

For some reason max_vco was set to a lower value that it can support,
which prevented some clock states to be applied. Fix this by setting it
to the same value as downstream.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>