The isp block evolved in subsequent socs, so some functions
will behave differently on newer variants.

Therefore make it possible to override the needed params functions.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Depending on the per-soc implementation there can be one interrupt
for isp, mipi and capture events or separate per-event interrupts.

So simply check for the presence of a named "mi" interrupt
to differentiate between the two cases.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Some variants have one irq signaling all of MI, MIPI and ISP events
while some rkisp1 variants use separate irqs for each.

Adapt the binding to handle both cases.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Having a clock name as "pclk_isp" suggests really hard a remnant from
the vendor kernel.

Right now no driver _and_ no devicetree actually uses this clock name
so there is still time to fix that naming.

Therefore drop the "_isp" suffix and only name it pclk.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The irq variable in struct rkisp1 is unused as it is only used
to request the irq during probe, so remove it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add missing required clocks and supply regulator properties for the
sensor input clock and vdd, vdd_io and vaa supply regulators.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Convert mt9p031 sensor bindings to yaml schema. Also update the
MAINTAINERS entry.

Although input-clock-frequency and pixel-clock-frequency have not been
definded as endpoint propierties in the textual bindings, the sensor
does parse them from the endpoint. Thus move these properties to the
endpoint in the new yaml bindings.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Make use of the BIT macro for setting individual bits. This improves
readability and safety with respect to shifts.

When on it also remove two zero value disable defines.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

To prevent corrupted frames after starting and stopping the sensor its
datasheet specifies a specific pause sequence to follow:

Stopping:
	Set Pause_Restart Bit -> Set Restart Bit -> Set Chip_Enable Off

Restarting:
	Set Chip_Enable On -> Clear Pause_Restart Bit

The Restart Bit is cleared automatically and must not be cleared
manually as this would cause undefined behavior.
Signed-off-by: Dirk Bender <d.bender@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Evaluate the desired pixel clock polarity from the device tree.
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The real and requested clock can differ and because it is used to
calculate PLL values, the real clock rate should be read.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are only one user left of __v4l2_async_nf_parse_fwnode_ep()
since [1], v4l2_async_nf_parse_fwnode_endpoints(). The two
functions can be merged.

The merge of the two highlights a dead code block conditioned by the
argument 'has_port' that always is false and can therefor be removed.

1. commit 0ae426eb ("media: v4l2-fwnode: Remove v4l2_async_notifier_parse_fwnode_endpoints_by_port()")

[Sakari Ailus: Aligned some lines to opening parentheses.]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The fwnode is retrieved using fwnode_graph_get_endpoint_by_id() without
the FWNODE_GRAPH_DEVICE_DISABLED flag set. So there is no need to
explicitly check if the fwnode is available as it always will be when
the check is performed, remove it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Rename V4L2 async notifier functions, replacing "notifier" with "nf" and
removing "_subdev" at the end of the function names adding subdevs as you
can only add subdevs to a notifier. Also wrap and otherwise clean up long
lines.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (imx7)
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add support for the R-Car V3U (r8a779a0) to the driver. The V3U has the
VIN modules connected to a ISP instead of directly to the R-Car CSI-2
receivers. The reason being that the ISP performs channel selection
based on CSI-2 VC/DT pairs and routes the video data to different VIN
modules. In other SoC versions this filtering is done by the VIN modules
themself.

While the media graph is very different from other SoCs the only
difference in operating the VIN modules is that the VC/DT filtering
should be skipped as that is performed by the ISP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The CSI-2 link notifications are no longer the only option for the VIN
group. Change the symbol prefix to rvin_csi2_ for all CSI-2 specific
code and move the link notification code to the correct section not to
mix it with the soon to be added R-Car ISP channel selector notification
helpers.

There is no functional change and apart from the symbol prefix change
all functions are moved verbatim.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The media device operations structure will be different depending on
what media graph layout is used. Instead of hard-coding the R-Car CSI-2
layout allow the operations to be passed as an argument.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

New IP versions will have different media graphs and require a different
link setup. Breakout the specific link setup to a callback that are
associated with the group.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The R-Car VIN group notifier will be extend to support a new group of
subdevices, the R-Car ISP channel selector in addition to the existing
R-Car CSI-2 receiver subdevices.

The existing DT parsing code can be reused if the port and max number of
endpoints are provided as parameters instead of being hard-coded. While
at it align the group notifier parser function names with the rest of
the driver.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The VIN group notifier code is intertwined with the media graph layout
code for R-Car CSI-2 subdevices, this makes it hard to extend the group
to also support the R-Car ISP channel selector.

Before breaking the two concepts apart and extending it move the group
code to its final location. There is no functional change and all
functions are moved verbatim.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The VIN group have always been connected to CSI-2 receivers and this
have spilled over to the naming of the array storing the subdevice
information. In preparation for connecting other types of subdevices
rename the array to remotes.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In preparation for adding a new media graph layout move the code reuse
of the parallel notifier setup from probe directly to the current media
graph initialization function. This is needed as there will be no
parallel interface in the new graph layout.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The cleanup code for the async notifiers can be refactored to own
functions to reduce code duplication and improve readability. While at
it rename the CSI-2 initialization function _csi2_ instead of _mc_ to
match.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The error paths of rvin_mc_init() do not clean up properly, fix this.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The controls for the video device are created in different code paths
depending on if the driver is using the media graph centric model (Gen3)
or the device centric model (Gen2 and earlier). This have lead to code
duplication that can be consolidated.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add support for the R-Car V3U (r8a779a0) to the driver. The V3U have the
CSI-2 modules connected to ISPs instead of directly to the R-Car VIN DMA
engines.

The ISP performs channel selection based on CSI-2 VC/DT pairs and routes
the video data. This requires the R-Car CSI-2 media entity to modeled
differently then on other SoCs as it on the V3U only have a single
source pad connected to the ISP.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Add support for R-Car V3U.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Pull ksmbd fixes from Steve French:
 "Five fixes for the ksmbd kernel server, including three security
  fixes:

   - remove follow symlinks support

   - use LOOKUP_BENEATH to prevent out of share access

   - SMB3 compounding security fix

   - fix for returning the default streams correctly, fixing a bug when
     writing ppt or doc files from some clients

   - logging more clearly that ksmbd is experimental (at module load
     time)"

* tag '5.15-rc2-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use LOOKUP_BENEATH to prevent the out of share access
  ksmbd: remove follow symlinks support
  ksmbd: check protocol id in ksmbd_verify_smb_message()
  ksmbd: add default data stream name in FILE_STREAM_INFORMATION
  ksmbd: log that server is experimental at module load

Pull EDAC fixes from Borislav Petkov:
 "Fix two EDAC drivers using the wrong value type for the DIMM mode"

* tag 'edac_urgent_for_v5.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/dmc520: Assign the proper type to dimm->edac_mode
  EDAC/synopsys: Fix wrong value type assignment for edac_mode

Pull thermal fixes from Daniel Lezcano:

 - Fix thermal shutdown after a suspend/resume due to a wrong TCC value
   restored on Intel platform (Antoine Tenart)

 - Fix potential buffer overflow when building the list of policies. The
   buffer size is not updated after writing to it (Dan Carpenter)

 - Fix wrong check against IS_ERR instead of NULL (Ansuel Smith)

* tag 'thermal-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/tsens: Fix wrong check for tzd in irq handlers
  thermal/core: Potential buffer overflow in thermal_build_list_of_policies()
  thermal/drivers/int340x: Do not set a wrong tcc offset on resume

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for X86:

   - Prevent sending the wrong signal when protection keys are enabled
     and the kernel handles a fault in the vsyscall emulation.

   - Invoke early_reserve_memory() before invoking e820_memory_setup()
     which is required to make the Xen dom0 e820 hooks work correctly.

   - Use the correct data type for the SETZ operand in the EMQCMDS
     instruction wrapper.

   - Prevent undefined behaviour to the potential unaligned accesss in
     the instruction decoder library"

* tag 'x86-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses
  x86/asm: Fix SETZ size enqcmds() build failure
  x86/setup: Call early_reserve_memory() earlier
  x86/fault: Fix wrong signal when vsyscall fails with pkey

Pull timer fix from Thomas Gleixner:
 "A single fix for the recently introduced regression in posix CPU
  timers which failed to stop the timer when requested. That caused
  unexpected signals to be sent to the process/thread causing
  malfunction"

* tag 'timers-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Prevent spuriously armed 0-value itimer

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Work around a bad GIC integration on a Renesas platform which can't
     handle byte-sized MMIO access

   - Plug a potential memory leak in the GICv4 driver

   - Fix a regression in the Armada 370-XP IPI code which was caused by
     issuing EOI instack of ACK.

   - A couple of small fixes here and there"

* tag 'irq-urgent-2021-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic: Work around broken Renesas integration
  irqchip/renesas-rza1: Use semicolons instead of commas
  irqchip/gic-v3-its: Fix potential VPE leak on error
  irqchip/goldfish-pic: Select GENERIC_IRQ_CHIP to fix build
  irqchip/mbigen: Repair non-kernel-doc notation
  irqdomain: Change the type of 'size' in __irq_domain_add() to be consistent
  irqchip/armada-370-xp: Fix ack/eoi breakage
  Documentation: Fix irq-domain.rst build warning

Merge misc fixes from Andrew Morton:
 "16 patches.

  Subsystems affected by this patch series: xtensa, sh, ocfs2, scripts,
  lib, and mm (memory-failure, kasan, damon, shmem, tools, pagecache,
  debug, and pagemap)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix uninitialized use in overcommit_policy_handler
  mm/memory_failure: fix the missing pte_unmap() call
  kasan: always respect CONFIG_KASAN_STACK
  sh: pgtable-3level: fix cast to pointer from integer of different size
  mm/debug: sync up latest migrate_reason to migrate_reason_names
  mm/debug: sync up MR_CONTIG_RANGE and MR_LONGTERM_PIN
  mm: fs: invalidate bh_lrus for only cold path
  lib/zlib_inflate/inffast: check config in C to avoid unused function warning
  tools/vm/page-types: remove dependency on opt_file for idle page tracking
  scripts/sorttable: riscv: fix undeclared identifier 'EM_RISCV' error
  ocfs2: drop acl cache for directories too
  mm/shmem.c: fix judgment error in shmem_is_huge()
  xtensa: increase size of gcc stack frame check
  mm/damon: don't use strnlen() with known-bogus source length
  kasan: fix Kconfig check of CC_HAS_WORKING_NOSANITIZE_ADDRESS
  mm, hwpoison: add is_free_buddy_page() in HWPoisonHandlable()

Pull SCSI fixes from James Bottomley:
 "Thirty-three fixes, I'm afraid.

  Essentially the build up from the last couple of weeks while I've been
  dealling with Linux Plumbers conference infrastructure issues. It's
  mostly the usual assortment of spelling fixes and minor corrections.

  The only core relevant changes are to the sd driver to reduce the spin
  up message spew and fix a small memory leak on the freeing path"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (33 commits)
  scsi: ses: Retry failed Send/Receive Diagnostic commands
  scsi: target: Fix spelling mistake "CONFLIFT" -> "CONFLICT"
  scsi: lpfc: Fix gcc -Wstringop-overread warning, again
  scsi: lpfc: Use correct scnprintf() limit
  scsi: lpfc: Fix sprintf() overflow in lpfc_display_fpin_wwpn()
  scsi: core: Remove 'current_tag'
  scsi: acornscsi: Remove tagged queuing vestiges
  scsi: fas216: Kill scmd->tag
  scsi: qla2xxx: Restore initiator in dual mode
  scsi: ufs: core: Unbreak the reset handler
  scsi: sd_zbc: Support disks with more than 2**32 logical blocks
  scsi: ufs: core: Revert "scsi: ufs: Synchronize SCSI and UFS error handling"
  scsi: bsg: Fix device unregistration
  scsi: sd: Make sd_spinup_disk() less noisy
  scsi: ufs: ufs-pci: Fix Intel LKF link stability
  scsi: mpt3sas: Clean up some inconsistent indenting
  scsi: megaraid: Clean up some inconsistent indenting
  scsi: sr: Fix spelling mistake "does'nt" -> "doesn't"
  scsi: Remove SCSI CDROM MAINTAINERS entry
  scsi: megaraid: Fix Coccinelle warning
  ...

Pull io_uring fixes from Jens Axboe:
 "This one looks a bit bigger than it is, but that's mainly because 2/3
  of it is enabling IORING_OP_CLOSE to close direct file descriptors.

  We've had a few folks using them and finding it confusing that the way
  to close them is through using -1 for file update, this just brings
  API symmetry for direct descriptors. Hence I think we should just do
  this now and have a better API for 5.15 release. There's some room for
  de-duplicating the close code, but we're leaving that for the next
  merge window.

  Outside of that, just small fixes:

   - Poll race fixes (Hao)

   - io-wq core dump exit fix (me)

   - Reschedule around potentially intensive tctx and buffer iterators
     on teardown (me)

   - Fix for always ending up punting files update to io-wq (me)

   - Put the provided buffer meta data under memcg accounting (me)

   - Tweak for io_write(), removing dead code that was added with the
     iterator changes in this release (Pavel)"

* tag 'io_uring-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  io_uring: make OP_CLOSE consistent with direct open
  io_uring: kill extra checks in io_write()
  io_uring: don't punt files update to io-wq unconditionally
  io_uring: put provided buffer meta data under memcg accounting
  io_uring: allow conditional reschedule for intensive iterators
  io_uring: fix potential req refcount underflow
  io_uring: fix missing set of EPOLLONESHOT for CQ ring overflow
  io_uring: fix race between poll completion and cancel_hash insertion
  io-wq: ensure we exit if thread group is exiting

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
      - keep ctrl->namespaces ordered (Christoph Hellwig)
      - fix incorrect h2cdata pdu offset accounting in nvme-tcp (Sagi
        Grimberg)
      - handled updated hw_queues in nvme-fc more carefully (Daniel
        Wagner, James Smart)

 - md lock order fix (Christoph)

 - fallocate locking fix (Ming)

 - blktrace UAF fix (Zhihao)

 - rq-qos bio tracking fix (Ming)

* tag 'block-5.15-2021-09-25' of git://git.kernel.dk/linux-block:
  block: hold ->invalidate_lock in blkdev_fallocate
  blktrace: Fix uaf in blk_trace access after removing by sysfs
  block: don't call rq_qos_ops->done_bio if the bio isn't tracked
  md: fix a lock order reversal in md_alloc
  nvme: keep ctrl->namespaces ordered
  nvme-tcp: fix incorrect h2cdata pdu offset accounting
  nvme-fc: remove freeze/unfreeze around update_nr_hw_queues
  nvme-fc: avoid race between time out and tear down
  nvme-fc: update hardware queues before using them

Pull xen fixes from Juergen Gross:
 "Some minor cleanups and fixes of some theoretical bugs, as well as a
  fix of a bug introduced in 5.15-rc1"

* tag 'for-linus-5.15b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/x86: fix PV trap handling on secondary processors
  xen/balloon: fix balloon kthread freezing
  swiotlb-xen: this is PV-only on x86
  xen/pci-swiotlb: reduce visibility of symbols
  PCI: only build xen-pcifront in PV-enabled environments
  swiotlb-xen: ensure to issue well-formed XENMEM_exchange requests
  Xen/gntdev: don't ignore kernel unmapping error
  xen/x86: drop redundant zeroing from cpu_initialize_context()

Merge tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:

 - fix to Kselftest common framework header install to run before other
   targets for it work correctly in parallel build case.

 - fixes to kvm test to not ignore fscanf() returns which could result
   in inconsistent test behavior and failures.

* tag 'linux-kselftest-fixes-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: kvm: fix get_run_delay() ignoring fscanf() return warn
  selftests: kvm: move get_run_delay() into lib/test_util
  selftests:kvm: fix get_trans_hugepagesz() ignoring fscanf() return warn
  selftests:kvm: fix get_warnings_count() ignoring fscanf() return warn
  selftests: be sure to make khdr before other targets