Commit 442a4f63 added btrfs device
statistic counters for detected IO and checksum errors to Linux 3.5.
The statistic part that counts checksum errors in
end_bio_extent_readpage() can cause a BUG() in a subfunction:
"kernel BUG at fs/btrfs/volumes.c:3762!"
That part is reverted with the current patch.
However, the counting of checksum errors in the scrub context remains
active, and the counting of detected IO errors (read, write or flush
errors) in all contexts remains active.

Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

With commit acce952b, btrfs was changed to flag the filesystem with
BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal
error happened like a write I/O errors of all mirrors.
In such situations, on unmount, the superblock is written in
btrfs_error_commit_super(). This is done with the intention to be able
to evaluate the error flag on the next mount. A warning is printed
in this case during the next mount and the log tree is ignored.

The issue is that it is possible that the superblock points to a root
that was not written (due to write I/O errors).
The result is that the filesystem cannot be mounted. btrfsck also does
not start and all the other btrfs-progs tools fail to start as well.
However, mount -o recovery is working well and does the right things
to recover the filesystem (i.e., don't use the log root, clear the
free space cache and use the next mountable root that is stored in the
root backup array).

This patch removes the writing of the superblock when
BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error
flag in the mount function.

These lines can be used to reproduce the issue (using /dev/sdm):
SCRATCH_DEV=/dev/sdm
SCRATCH_MNT=/mnt
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo
ls -alLF /dev/mapper/foo
mkfs.btrfs /dev/mapper/foo
mount /dev/mapper/foo $SCRATCH_MNT
echo bar > $SCRATCH_MNT/foo
sync
echo 0 25165824 error | dmsetup reload foo
dmsetup resume foo
ls -alF $SCRATCH_MNT
touch $SCRATCH_MNT/1
ls -alF $SCRATCH_MNT
sleep 35
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo
dmsetup resume foo
sleep 1
umount $SCRATCH_MNT
btrfsck /dev/mapper/foo
dmsetup remove foo
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>

Daniel Blueman reported a bug with fio+balance on a ramdisk setup.
Basically what happens is the balance relocates a tree block which will drop
the implicit refs for all of its children and adds a full backref.  Once the
block is relocated we have to add the implicit refs back, so when we cow the
block again we add the implicit refs for its children back.  The problem
comes when the original drop ref doesn't get run before we add the implicit
refs back.  The delayed ref stuff will specifically prefer ADD operations
over DROP to keep us from freeing up an extent that will have references to
it, so we try to add the implicit ref before it is actually removed and we
panic.  This worked fine before because the add would have just canceled the
drop out and we would have been fine.  But the backref walking work needs to
be able to freeze the delayed ref stuff in time so we have this ever
increasing sequence number that gets attached to all new delayed ref updates
which makes us not merge refs and we run into this issue.

So to fix this we need to merge delayed refs.  So everytime we run a
clustered ref we need to try and merge all of its delayed refs.  The backref
walking stuff locks the delayed ref head before processing, so if we have it
locked we are safe to merge any refs inside of the sequence number.  If
there is no sequence number we can merge all refs.  Doing this not only
fixes our bug but keeps the delayed ref code from adding and removing
useless refs and batching together multiple refs into one search instead of
one search per delayed ref, which will really help our commit times.  I ran
this with Daniels test and 276 and I haven't seen any problems.  Thanks,
Reported-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Subvol delete is a special kind of awful where we use the global reserve to
cover the ENOSPC requirements.  The problem is once we're done removing
everything we do a btrfs_update_inode(), which by default will try to do the
delayed update stuff which will use it's own reserve.  There will be no
space in this reserve and we'll return ENOSPC.  So instead use
btrfs_update_inode_fallback() which will just fallback to updating the inode
item in the case of enospc.  This is fine because the global reserve covers
the space requirements for this.  With this patch I can now delete a subvol
on a problem image Dave Sterba sent me.  Thanks,
Reported-by: David Sterba <dave@jikos.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

When we created a new snapshot, the mtime and ctime of its parent directory
were not updated. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

With commit

commit d1270cd9
Author: Arne Jansen <sensille@gmx.net>
Date:   Tue Sep 13 15:16:43 2011 +0200

     Btrfs: put back delayed refs that are too new

I added a window where the delayed_ref's head->ref_mod code can diverge
from the sum of the remaining refs, because we release the head->mutex
in the middle. This leads to btrfs_lookup_extent_info returning wrong
numbers. This patch fixes this by adjusting the head's ref_mod with each
delayed ref we run.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

When we split a leaf, we may end up inserting a new root on top of that
leaf.  The reflog code was incorrectly assuming the old root was always
a node.  This makes sure we skip over leaves.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Arne was complaining about the space cache having mismatching generation
numbers when debugging a deadlock.  This is because we can run out of space
in our preallocated range for our space cache if you have a pretty
fragmented amount of space in your pinned space.  So just increase the
amount of space we preallocate for space cache so we can be sure to have
enough space.  This will only really affect data ranges since their the only
chunks that end up larger than 256MB.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

We need a barrir before calling waitqueue_active otherwise we will miss
wakeups.  So in places that do atomic_dec(); then atomic_read() use
atomic_dec_return() which imply a memory barrier (see memory-barriers.txt)
and then add an explicit memory barrier everywhere else that need them.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Commit a168650c introduced a waiting mechanism to prevent busy waiting in
btrfs_run_delayed_refs. This can deadlock with btrfs_run_ordered_operations,
where a tree_mod_seq is held while waiting for the io to complete, while
the end_io calls btrfs_run_delayed_refs.
This whole mechanism is unnecessary. If not enough runnable refs are
available to satisfy count, just return as count is more like a guideline
than a strict requirement.
In case we have to run all refs, commit transaction makes sure that no
other threads are working in the transaction anymore, so we just assert
here that no refs are blocked.
Signed-off-by: Arne Jansen <sensille@gmx.net>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Fix a real bug caught by coccinelle.

fs/btrfs/delayed-inode.c:1013:1-11: second lock on line 1013
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

We've been allocating a big array for csums instead of storing them in the
io_tree like we do for buffered reads because previously we were locking the
entire range, so we didn't have an extent state for each sector of the
range.  But now that we do the range locking as we map the buffers we can
limit the mapping lenght to sectorsize and use the private part of the
io_tree for our csums.  This allows us to avoid an extra memory allocation
for direct reads which could incur latency.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

When we close devices we add back empty devices for some reason that escapes
me.  In the case of a missing dev we don't allocate an rcu_string for it's
name, so check to see if the device has a name and if it doesn't don't
bother strdup()'ing it.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

If you do the following

mkfs.btrfs /dev/sdb /dev/sdc
rmmod btrfs
dd if=/dev/zero of=/dev/sdb bs=1M count=1
mount -o degraded /dev/sdc /mnt/btrfs-test

the box will panic trying to deref the name for the missing dev since it is
the lower numbered devid.  So fix show_devname to not use missing devices.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

In iterate_inodes_from_logical() the error result from
extent_from_logical() is patched by mistake. Typically ENOENT is
patched to EINVAL because (-ENOENT & BTRFS_EXTENT_FLAG_TREE_BLOCK)
evaluates to true.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>

A deadlock in xfstests 113 was uncovered by commit

d187663e

This is because we would not return EIOCBQUEUED for short AIO reads, instead
we'd wait for the DIO to complete and then return the amount of data we
transferred, which would allow our stuff to unlock the remaning amount.  But
with this change this no longer happens, so if we have a short AIO read (for
example if we try to read past EOF), we could leave the section from EOF to
the end of where we tried to read locked.  Fixing this is tricky since there
is no clear way to know exactly how much data DIO truly submitted for IO, so
to make this less hard on ourselves and less combersome we need to lock the
extents as we try to map them, and then we unlock any areas we didn't
actually map.  This makes us completely safe from deadlocks and reliance on
a particular behavior of the DIO code.  This also lays the groundwork for
allowing us to use the normal csum storage method for reads which means we
can remove an allocation.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

"trans->transid" is cpu endian but we want to store the data as little
endian.  "item->ctime.nsec" is only 32 bits, not 64.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

We should release this mutex before returning the error code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

add_qgroup_rb() never returns NULL, only error pointers.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

These are returning zero when it should be returning a negative error
code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

This should obviously not be "if (&flag)" but "if (flag)".
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>

Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This is the kernel portion of btrfs send/receive

Conflicts:
	fs/btrfs/Makefile
	fs/btrfs/backref.h
	fs/btrfs/ctree.c
	fs/btrfs/ioctl.c
	fs/btrfs/ioctl.h
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

This patch introduces the BTRFS_IOC_SEND ioctl that is
required for send. It allows btrfs-progs to implement
full and incremental sends. Patches for btrfs-progs will
follow.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Reviewed-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>

This function is used to find the differences between
two trees. The tree compare skips whole subtrees if it
detects shared tree blocks and thus is pretty fast.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Reviewed-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>

This patch introduces uuids for subvolumes. Each
subvolume has it's own uuid. In case it was snapshotted,
it also contains parent_uuid. In case it was received,
it also contains received_uuid.

It also introduces subvolume ctime/otime/stime/rtime. The
first two are comparable to the times found in inodes. otime
is the origin/creation time and ctime is the change time.
stime/rtime are only valid on received subvolumes.
stime is the time of the subvolume when it was
sent. rtime is the time of the subvolume when it was
received.

Additionally to the times, we have a transid for each
time. They are updated at the same place as the times.

btrfs receive uses stransid and rtransid to find out
if a received subvolume changed in the meantime.

If an older kernel mounts a filesystem with the
extented fields, all fields become invalid. The next
mount with a new kernel will detect this and reset the
fields.
Signed-off-by: Alexander Block <ablock84@googlemail.com>
Reviewed-by: David Sterba <dave@jikos.cz>
Reviewed-by: Arne Jansen <sensille@gmx.net>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Alex Lyakas <alex.bolshoy.btrfs@gmail.com>

Make iref_to_path non static (needed in send) and rename
it to btrfs_iref_to_path
Signed-off-by: Alexander Block <ablock84@googlemail.com>

We were missing wakeups on the delayed ref waitqueue due
to races on waitqueue_active.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Each ordered operation has a free callback, and this was called with the
worker spinlock held.  Josef made the free callback also call iput,
which we can't do with the spinlock.

This drops the spinlock for the free operation and grabs it again before
moving through the rest of the list.  We'll circle back around to this
and find a cleaner way that doesn't bounce the lock around so much.
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
cc: stable@kernel.org

In support of the recently added capability to remount with lzo
compression, provide a helper function to check the compression
INCOMPAT flags when remounting with lzo compression, and set
the flags if necessary.

Also, implement the new helper function when defragmenting with
explicit lzo compression and when setting the default subvolume.
Signed-off-by: Mitch Harder <mitch.harder@sabayonlinux.org>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Conflicts:
	fs/btrfs/ioctl.c
	fs/btrfs/ioctl.h
	fs/btrfs/transaction.c
	fs/btrfs/transaction.h
Signed-off-by: Chris Mason <chris.mason@fusionio.com>

Often no exact match is wanted but just the next lower or
higher item. There's a lot of duplicated code throughout
btrfs to deal with the corner cases. This patch adds a
helper function that can facilitate searching.
Signed-off-by: Arne Jansen <sensille@gmx.net>

Lift the EXDEV condition and allow different root trees for files being
cloned, then pass source inode's root when searching for extents.
Cloning is not allowed to cross vfsmounts, ie. when two subvolumes from
one filesystem are mounted separately.
Signed-off-by: David Sterba <dsterba@suse.cz>

While testing with my buffer read fio jobs[1], I find that btrfs does not
perform well enough.

Here is a scenario in fio jobs:

We have 4 threads, "t1 t2 t3 t4", starting to buffer read a same file,
and all of them will race on add_to_page_cache_lru(), and if one thread
successfully puts its page into the page cache, it takes the responsibility
to read the page's data.

And what's more, reading a page needs a period of time to finish, in which
other threads can slide in and process rest pages:

     t1          t2          t3          t4
   add Page1
   read Page1  add Page2
     |         read Page2  add Page3
     |            |        read Page3  add Page4
     |            |           |        read Page4
-----|------------|-----------|-----------|--------
     v            v           v           v
    bio          bio         bio         bio

Now we have four bios, each of which holds only one page since we need to
maintain consecutive pages in bio.  Thus, we can end up with far more bios
than we need.

Here we're going to
a) delay the real read-page section and
b) try to put more pages into page cache.

With that said, we can make each bio hold more pages and reduce the number
of bios we need.

Here is some numbers taken from fio results:
         w/o patch                 w patch
       -------------  --------  ---------------
READ:    745MB/s        +25%       934MB/s

[1]:
[global]
group_reporting
thread
numjobs=4
bs=32k
rw=read
ioengine=sync
directory=/mnt/btrfs/

[READ]
filename=foobar
size=2000M
invalidate=1
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

For backref walking, we've introduce delayed ref's sequence.  However,
it changes our preallocation behavior.

The story is that when we preallocate an extent and then mark it written
piece by piece, the ideal case should be that we don't need to COW the
extent, which is why we use 'preallocate'.

But we may not make use of preallocation, since when we check for cross refs on
the extent, we may have two ref entries which have the same content except
the sequence value, and we recognize them as cross refs and do COW to allocate
another extent.

So we end up with several pieces of space instead of an whole extent.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

There is a small window where an eb can have no IO bits set on it, which
could potentially result in extent_buffer_under_io() returning false when we
want it to return true, which could result in not fun things happening.  So
in order to protect this case we need to hold the refs_lock when we make
this transition to make sure we get reliable results out of
extent_buffer_udner_io().  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

This sounds sort of impossible but it is the only thing I can think of and
at the very least it is theoretically possible so here it goes.

If we are in try_release_extent_buffer we will check that the ref count on
the extent buffer is 1 and not under IO, and then go down and clear the tree
ref.  If between this check and clearing the tree ref somebody else comes in
and grabs a ref on the eb and the marks it dirty before
try_release_extent_buffer() does it's tree ref clear we can end up with a
dirty eb that will be freed while it is still dirty which will result in a
panic.  Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

I noticed while looking at an extent_buffer race that we will
unconditionally return 1 if we get down to release_extent_buffer after
clearing the tree ref.  However we can easily race in here and get a ref on
the eb and not actually free the eb.  So make release_extent_buffer return 1
if it free'd the eb and 0 if not so we can be a little kinder to the vm.
Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>

Code is added to suppress the I/O stats printing at mount time if all
statistic values are zero.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>

People complained about the annoying kernel log message
"btrfs: no dev_stats entry found ... (OK on first mount after mkfs)"
everytime a filesystem is mounted for the first time after running
mkfs. Since the distribution of the btrfs-progs is not synchronized
to the kernel version, mkfs like it is now will be used also in the
future. Then this message is not useful to find errors, it is just
annoying. This commit removes the printk().
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>