- 14 Jun, 2020 21 commits
-
-
Rikard Falkeborn authored
ad5592r_ext_info is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 13293 2088 256 15637 3d15 drivers/iio/dac/ad5592r-base.o After: text data bss dec hex filename 13421 1960 256 15637 3d15 drivers/iio/dac/ad5592r-base.o Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Rikard Falkeborn authored
ad5380_ext_info is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 12060 3280 192 15532 3cac drivers/iio/dac/ad5380.o After: text data bss dec hex filename 12252 3088 192 15532 3cac drivers/iio/dac/ad5380.o Signed-off-by:
-
Rikard Falkeborn authored
max11100_channels is not modified and can therefore be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 3776 1168 0 4944 1350 drivers/iio/adc/max11100.o After: text data bss dec hex filename 3968 976 0 4944 1350 drivers/iio/adc/max11100.o Signed-off-by:
-
Andy Shevchenko authored
acpi_dev_get_resources() does perform the NULL pointer check against ACPI companion device which is given as function parameter. Thus, there is no need to duplicate this check in the caller. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jonathan Albrieux authored
According to AK09911 datasheet, if reset gpio is provided then deassert reset on ak8975_power_on() and assert reset on ak8975_power_off(). Without reset's deassertion during ak8975_power_on(), driver's probe fails on ak8975_who_i_am() while checking for device identity for AK09911 chip. AK09911 has an active low reset gpio to handle register's reset. AK09911 datasheet says that, if not used, reset pin should be connected to VID. This patch emulates this situation. Signed-off-by:
Jonathan Albrieux <jonathan.albrieux@gmail.com> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Jonathan Albrieux authored
Minor comment style edits. Signed-off-by:
-
Jonathan Albrieux authored
Add reset-gpio support. Without reset's deassertion during ak8975_power_on(), driver's probe fails on ak8975_who_i_am() while checking for device identity for AK09911 chip. AK09911 has an active low reset gpio to handle register's reset. AK09911 datasheet says that, if not used, reset pin should be connected to VID. This patch emulates this situation. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Jonathan Albrieux authored
Converts documentation from txt format to yaml. Signed-off-by:
-
Jonathan Albrieux authored
Reword gpios documentation, add interrupt documentation and fix styles. Update example to use interrupts instead of gpios. Signed-off-by:
-
Jishnu Prakash authored
Change pr_err/pr_debug statements to dev_err/dev_dbg for increased clarity. Signed-off-by:
Jishnu Prakash <jprakash@codeaurora.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Jishnu Prakash authored
Clean up some return value checks to make code more compact. Signed-off-by:
-
Jishnu Prakash authored
The ADC architecture on PMIC7 is changed as compared to PMIC5. The major change from PMIC5 is that all SW communication to ADC goes through PMK8350, which communicates with other PMICs through PBS when the ADC on PMK8350 works in master mode. The SID register is used to identify the PMICs with which the PBS needs to communicate. Add support for the same. Signed-off-by:
-
Jishnu Prakash authored
Add info property under adc_data to support adding ADC variants which may use different iio_info than the one defined for PMIC5. Signed-off-by:
-
Jishnu Prakash authored
Add documentation for PMIC7 ADC peripheral. For the PMIC7-type PMICs, ADC peripheral is present in HW for the following PMICs: PMK8350, PM8350, PM8350b, PMR735a and PMR735b. Of these, only the ADC peripheral on PMK8350 is exposed directly to SW. If SW needs to communicate with ADCs on other PMICs, it specifies the PMIC to PMK8350 through the newly added SID register and communication between PMK8350 ADC and other PMIC ADCs is carried out through PBS(Programmable Boot Sequence) at the firmware level. In addition, add definitions for ADC channels and virtual channel definitions (combination of ADC channel number and PMIC SID number) per PMIC, to be used by ADC clients for PMIC7. Signed-off-by:
Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by:
-
Jishnu Prakash authored
Convert the adc bindings from .txt to .yaml format. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Dan Robertson authored
Add basic support for the Bosch Sensortec BMA400 3-axes ultra-low power accelerometer when configured to use SPI. Signed-off-by:
Dan Robertson <dan@dlrobertson.com> Signed-off-by:
-
Matt Ranostay authored
Move ret variable to the IIO_CHAN_INFO_RAW switch since currently only used within that scope. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Alexandru Ardelean authored
We may want to get rid of the iio_priv_to_dev() helper. That's a bit uncertain at this point. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. For this driver, removing the iio_priv_to_dev() helper means passing the iio_dev object on hts221_allocate_buffers() & hts221_allocate_trigger(). Signed-off-by:
-
Alexandru Ardelean authored
We may want to get rid of the iio_priv_to_dev() helper. That's a bit uncertain at this point. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. For this driver, removing iio_priv_to_dev() also means keeping a reference on the state struct. Signed-off-by:
Jeff LaBundy <jeff@labundy.com> Signed-off-by:
-
Alexandru Ardelean authored
We may want to get rid of the iio_priv_to_dev() helper. That's a bit uncertain at this point. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. For this driver, removing iio_priv_to_dev() means keeping a reference on the state struct. Signed-off-by:
-
Alexandru Ardelean authored
We may want to get rid of the iio_priv_to_dev() helper. That's a bit uncertain at this point. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. For this driver, it implies passing the IIO device on the i2c client private data. The implementation of iio_priv() will not be affected by the rework/hiding of iio_priv_to_dev(). Signed-off-by:
-
- 12 Jun, 2020 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull the Kernel Concurrency Sanitizer from Thomas Gleixner: "The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which relies on compile-time instrumentation, and uses a watchpoint-based sampling approach to detect races. The feature was under development for quite some time and has already found legitimate bugs. Unfortunately it comes with a limitation, which was only understood late in the development cycle: It requires an up to date CLANG-11 compiler CLANG-11 is not yet released (scheduled for June), but it's the only compiler today which handles the kernel requirements and especially the annotations of functions to exclude them from KCSAN instrumentation correctly. These annotations really need to work so that low level entry code and especially int3 text poke handling can be completely isolated. A detailed discussion of the requirements and compiler issues can be found here: https://lore.kernel.org/lkml/CANpmjNMTsY_8241bS7=XAfqvZHFLrVEkv_uM4aDUWE_kh3Rvbw@mail.gmail.com/ We came to the conclusion that trying to work around compiler limitations and bugs again would end up in a major trainwreck, so requiring a working compiler seemed to be the best choice. For Continous Integration purposes the compiler restriction is manageable and that's where most xxSAN reports come from. For a change this limitation might make GCC people actually look at their bugs. Some issues with CSAN in GCC are 7 years old and one has been 'fixed' 3 years ago with a half baken solution which 'solved' the reported issue but not the underlying problem. The KCSAN developers also ponder to use a GCC plugin to become independent, but that's not something which will show up in a few days. Blocking KCSAN until wide spread compiler support is available is not a really good alternative because the continuous growth of lockless optimizations in the kernel demands proper tooling support" * tag 'locking-kcsan-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (76 commits) compiler_types.h, kasan: Use __SANITIZE_ADDRESS__ instead of CONFIG_KASAN to decide inlining compiler.h: Move function attributes to compiler_types.h compiler.h: Avoid nested statement expression in data_race() compiler.h: Remove data_race() and unnecessary checks from {READ,WRITE}_ONCE() kcsan: Update Documentation to change supported compilers kcsan: Remove 'noinline' from __no_kcsan_or_inline kcsan: Pass option tsan-instrument-read-before-write to Clang kcsan: Support distinguishing volatile accesses kcsan: Restrict supported compilers kcsan: Avoid inserting __tsan_func_entry/exit if possible ubsan, kcsan: Don't combine sanitizer with kcov on clang objtool, kcsan: Add kcsan_disable_current() and kcsan_enable_current_nowarn() kcsan: Add __kcsan_{enable,disable}_current() variants checkpatch: Warn about data_race() without comment kcsan: Use GFP_ATOMIC under spin lock Improve KCSAN documentation a bit kcsan: Make reporting aware of KCSAN tests kcsan: Fix function matching in report kcsan: Change data_race() to no longer require marking racing accesses kcsan: Move kcsan_{disable,enable}_current() to kcsan-checks.h ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull atomics rework from Thomas Gleixner: "Peter Zijlstras rework of atomics and fallbacks. This solves two problems: 1) Compilers uninline small atomic_* static inline functions which can expose them to instrumentation. 2) The instrumentation of atomic primitives was done at the architecture level while composites or fallbacks were provided at the generic level. As a result there are no uninstrumented variants of the fallbacks. Both issues were in the way of fully isolating fragile entry code pathes and especially the text poke int3 handler which is prone to an endless recursion problem when anything in that code path is about to be instrumented. This was always a problem, but got elevated due to the new batch mode updates of tracing. The solution is to mark the functions __always_inline and to flip the fallback and instrumentation so the non-instrumented variants are at the architecture level and the instrumentation is done in generic code. The latter introduces another fallback variant which will go away once all architectures have been moved over to arch_atomic_*" * tag 'locking-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomics: Flip fallbacks and instrumentation asm-generic/atomic: Use __always_inline for fallback wrappers -
Linus Torvalds authored
Pull updates from Andrew Morton: "A few fixes and stragglers. Subsystems affected by this patch series: mm/memory-failure, ocfs2, lib/lzo, misc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: amdgpu: a NULL ->mm does not mean a thread is a kthread lib/lzo: fix ambiguous encoding bug in lzo-rle ocfs2: fix build failure when TCP/IP is disabled mm/memory-failure: send SIGBUS(BUS_MCEERR_AR) only to current thread mm/memory-failure: prioritize prctl(PR_MCE_KILL) over vm.memory_failure_early_kill
-
Christoph Hellwig authored
Use the proper API instead. Fixes: 70539bd7 ("drm/amd: Update MEC HQD loading code for KFD") Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Rodgman authored
In some rare cases, for input data over 32 KB, lzo-rle could encode two different inputs to the same compressed representation, so that decompression is then ambiguous (i.e. data may be corrupted - although zram is not affected because it operates over 4 KB pages). This modifies the compressor without changing the decompressor or the bitstream format, such that: - there is no change to how data produced by the old compressor is decompressed - an old decompressor will correctly decode data from the updated compressor - performance and compression ratio are not affected - we avoid introducing a new bitstream format In testing over 12.8M real-world files totalling 903 GB, three files were affected by this bug. I also constructed 37M semi-random 64 KB files totalling 2.27 TB, and saw no affected files. Finally I tested over files constructed to contain each of the ~1024 possible bad input sequences; for all of these cases, updated lzo-rle worked correctly. There is no significant impact to performance or compression ratio. Signed-off-by:
Dave Rodgman <dave.rodgman@arm.com> Signed-off-by:
-
Tom Seewald authored
After commit 12abc5ee ("tcp: add tcp_sock_set_nodelay") and commit c488aead ("tcp: add tcp_sock_set_user_timeout"), building the kernel with OCFS2_FS=y but without INET=y causes it to fail with: ld: fs/ocfs2/cluster/tcp.o: in function `o2net_accept_many': tcp.c:(.text+0x21b1): undefined reference to `tcp_sock_set_nodelay' ld: tcp.c:(.text+0x21c1): undefined reference to `tcp_sock_set_user_timeout' ld: fs/ocfs2/cluster/tcp.o: in function `o2net_start_connect': tcp.c:(.text+0x2633): undefined reference to `tcp_sock_set_nodelay' ld: tcp.c:(.text+0x2643): undefined reference to `tcp_sock_set_user_timeout' This is due to tcp_sock_set_nodelay() and tcp_sock_set_user_timeout() being declared in linux/tcp.h and defined in net/ipv4/tcp.c, which depend on TCP/IP being enabled. To fix this, make OCFS2_FS depend on INET=y which already requires NET=y. Fixes: 12abc5ee ("tcp: add tcp_sock_set_nodelay") Fixes: c488aead ("tcp: add tcp_sock_set_user_timeout") Signed-off-by:
Tom Seewald <tseewald@gmail.com> Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by:
-
Naoya Horiguchi authored
Action Required memory error should happen only when a processor is about to access to a corrupted memory, so it's synchronous and only affects current process/thread. Recently commit 872e9a20 ("mm, memory_failure: don't send BUS_MCEERR_AO for action required error") fixed the issue that Action Required memory could unnecessarily send SIGBUS to the processes which share the error memory. But we still have another issue that we could send SIGBUS to a wrong thread. This is because collect_procs() and task_early_kill() fails to add the current process to "to-kill" list. So this patch is suggesting to fix it. With this fix, SIGBUS(BUS_MCEERR_AR) is never sent to non-current process/thread. Signed-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Link: http://lkml.kernel.org/r/1591321039-22141-3-git-send-email-naoya.horiguchi@nec.comSigned-off-by:
-
Naoya Horiguchi authored
Patch series "hwpoison: fixes signaling on memory error" This is a small patchset to solve issues in memory error handler to send SIGBUS to proper process/thread as expected in configuration. Please see descriptions in individual patches for more details. This patch (of 2): Early-kill policy is controlled from two types of settings, one is per-process setting prctl(PR_MCE_KILL) and the other is system-wide setting vm.memory_failure_early_kill. Users expect per-process setting to override system-wide setting as many other settings do, but early-kill setting doesn't work as such. For example, if a system configures vm.memory_failure_early_kill to 1 (enabled), a process receives SIGBUS even if it's configured to explicitly disable PF_MCE_KILL by prctl(). That's not desirable for applications with their own policies. This patch is suggesting to change the priority of these two types of settings, by checking sysctl_memory_failure_early_kill only when a given process has the default kill policy. Note that this patch is solving a thread choice issue too. Originally, collect_procs() always chooses the main thread when vm.memory_failure_early_kill is 1, even if the process has a dedicated thread for memory error handling. SIGBUS should be sent to the dedicated thread if early-kill is enabled via vm.memory_failure_early_kill as we are doing for PR_MCE_KILL_EARLY processes. Signed-off-by:
-
- 11 Jun, 2020 11 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few late stragglers in here. In particular: - Validate full range for provided buffers (Bijan) - Fix bad use of kfree() in buffer registration failure (Denis) - Don't allow close of ring itself, it's not fully safe. Making it fully safe would require making the system call more expensive, which isn't worth it. - Buffer selection fix - Regression fix for O_NONBLOCK retry - Make IORING_OP_ACCEPT honor O_NONBLOCK (Jiufei) - Restrict opcode handling for SQ/IOPOLL (Pavel) - io-wq work handling cleanups and improvements (Pavel, Xiaoguang) - IOPOLL race fix (Xiaoguang)" * tag 'io_uring-5.8-2020-06-11' of git://git.kernel.dk/linux-block: io_uring: fix io_kiocb.flags modification race in IOPOLL mode io_uring: check file O_NONBLOCK state for accept io_uring: avoid unnecessary io_wq_work copy for fast poll feature io_uring: avoid whole io_wq_work copy for requests completed inline io_uring: allow O_NONBLOCK async retry io_wq: add per-wq work handler instead of per work io_uring: don't arm a timeout through work.func io_uring: remove custom ->func handlers io_uring: don't derive close state from ->func io_uring: use kvfree() in io_sqe_buffer_register() io_uring: validate the full range of provided buffers for access io_uring: re-set iov base/len for buffer select retry io_uring: move send/recv IOPOLL check into prep io_uring: deduplicate io_openat{,2}_prep() io_uring: do build_open_how() only once io_uring: fix {SQ,IO}POLL with unsupported opcodes io_uring: disallow close of ring itself -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Some followup fixes for this merge window. In particular: - Seqcount write missing preemption disable for stats (Ahmed) - blktrace fixes (Chaitanya) - Redundant initializations (Colin) - Various small NVMe fixes (Chaitanya, Christoph, Daniel, Max, Niklas, Rikard) - loop flag bug regression fix (Martijn) - blk-mq tagging fixes (Christoph, Ming)" * tag 'block-5.8-2020-06-11' of git://git.kernel.dk/linux-block: umem: remove redundant initialization of variable ret pktcdvd: remove redundant initialization of variable ret nvmet: fail outstanding host posted AEN req nvme-pci: use simple suspend when a HMB is enabled nvme-fc: don't call nvme_cleanup_cmd() for AENs nvmet-tcp: constify nvmet_tcp_ops nvme-tcp: constify nvme_tcp_mq_ops and nvme_tcp_admin_mq_ops nvme: do not call del_gendisk() on a disk that was never added blk-mq: fix blk_mq_all_tag_iter blk-mq: split out a __blk_mq_get_driver_tag helper blktrace: fix endianness for blk_log_remap() blktrace: fix endianness in get_pdu_int() blktrace: use errno instead of bi_status block: nr_sects_write(): Disable preemption on seqcount write block: remove the error argument to the block_bio_complete tracepoint loop: Fix wrong masking of status flags block/bio-integrity: don't free 'buf' if bio_integrity_add_page() failed -
David Howells authored
Fix afs_store_data() so that it sets the mtime in the new operation descriptor otherwise the mtime on the server gets set to 0 when a write is stored to the server. Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept") Reported-by:
Dave Botsch <botsch@cnf.cornell.edu> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull more x86 updates from Thomas Gleixner: "A set of fixes and updates for x86: - Unbreak paravirt VDSO clocks. While the VDSO code was moved into lib for sharing a subtle check for the validity of paravirt clocks got replaced. While the replacement works perfectly fine for bare metal as the update of the VDSO clock mode is synchronous, it fails for paravirt clocks because the hypervisor can invalidate them asynchronously. Bring it back as an optional function so it does not inflict this on architectures which are free of PV damage. - Fix the jiffies to jiffies64 mapping on 64bit so it does not trigger an ODR violation on newer compilers - Three fixes for the SSBD and *IB* speculation mitigation maze to ensure consistency, not disabling of some *IB* variants wrongly and to prevent a rogue cross process shutdown of SSBD. All marked for stable. - Add yet more CPU models to the splitlock detection capable list !@#%$! - Bring the pr_info() back which tells that TSC deadline timer is enabled. - Reboot quirk for MacBook6,1" * tag 'x86-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Unbreak paravirt VDSO clocks lib/vdso: Provide sanity check for cycles (again) clocksource: Remove obsolete ifdef x86_64: Fix jiffies ODR violation x86/speculation: PR_SPEC_FORCE_DISABLE enforcement for indirect branches. x86/speculation: Prevent rogue cross-process SSBD shutdown x86/speculation: Avoid force-disabling IBPB based on STIBP and enhanced IBRS. x86/cpu: Add Sapphire Rapids CPU model number x86/split_lock: Add Icelake microserver and Tigerlake CPU models x86/apic: Make TSC deadline timer detection message visible x86/reboot/quirks: Add MacBook6,1 reboot quirk -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A small fix for the VDSO code to force inline __cvdso_clock_gettime_common() so the compiler can't generate horrible code" * tag 'timers-urgent-2020-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lib/vdso: Force inlining of __cvdso_clock_gettime_common()
-
Linus Torvalds authored
Merge some more updates from Andrew Morton: - various hotfixes and minor things - hch's use_mm/unuse_mm clearnups Subsystems affected by this patch series: mm/hugetlb, scripts, kcov, lib, nilfs, checkpatch, lib, mm/debug, ocfs2, lib, misc. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kernel: set USER_DS in kthread_use_mm kernel: better document the use_mm/unuse_mm API contract kernel: move use_mm/unuse_mm to kthread.c kernel: move use_mm/unuse_mm to kthread.c stacktrace: cleanup inconsistent variable type lib: test get_count_order/long in test_bitops.c mm: add comments on pglist_data zones ocfs2: fix spelling mistake and grammar mm/debug_vm_pgtable: fix kernel crash by checking for THP support lib: fix bitmap_parse() on 64-bit big endian archs checkpatch: correct check for kernel parameters doc nilfs2: fix null pointer dereference at nilfs_segctor_do_construct() lib/lz4/lz4_decompress.c: document deliberate use of `&' kcov: check kcov_softirq in kcov_remote_stop() scripts/spelling: add a few more typos khugepaged: selftests: fix timeout condition in wait_for_scan()
-
Joerg Roedel authored
The patch introducing the struct was probably never compile tested, because it sets a handler with a wrong function signature. Wrap the handler into a functions with the correct signature to fix the build. Fixes: 0f1c9688 ("tty/sysrq: alpha: export and use __sysrq_get_key_op()") Cc: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull more RISC-V updates from Palmer Dabbelt: - Kconfig select statements are now sorted alphanumerically - first-level interrupts are now handled via a full irqchip driver - CPU hotplug is fixed - vDSO calls now use the common vDSO infrastructure * tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: set the permission of vdso_data to read-only riscv: use vDSO common flow to reduce the latency of the time-related functions riscv: fix build warning of missing prototypes RISC-V: Don't mark init section as non-executable RISC-V: Force select RISCV_INTC for CONFIG_RISCV RISC-V: Remove do_IRQ() function clocksource/drivers/timer-riscv: Use per-CPU timer interrupt irqchip: RISC-V per-HART local interrupt controller driver RISC-V: Rename and move plic_find_hart_id() to arch directory RISC-V: self-contained IPI handling routine RISC-V: Sort select statements alphanumerically
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "arm64 fixes that came in during the merge window. There will probably be more to come, but it doesn't seem like it's worth me sitting on these in the meantime. - Fix SCS debug check to report max stack usage in bytes as advertised - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS - Fix incorrect mask in HiSilicon L3C perf PMU driver - Fix compat vDSO compilation under some toolchain configurations - Fix false UBSAN warning from ACPI IORT parsing code - Fix booting under bootloaders that ignore TEXT_OFFSET - Annotate debug initcall function with '__init'" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: warn on incorrect placement of the kernel by the bootloader arm64: acpi: fix UBSAN warning arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO drivers/perf: hisi: Fix wrong value for all counters enable arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS arm64: debug: mark a function as __init to save some memory scs: Report SCS usage in bytes rather than number of entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu updates from Greg Ungerer: - casting clean up in the user access macros - memory leak on error case fix for PCI probing - update of a defconfig * tag 'm68knommu-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k,nommu: fix implicit cast from __user in __{get,put}_user_asm() m68k,nommu: add missing __user in uaccess' __ptr() macro m68k: Drop CONFIG_MTD_M25P80 in stmark2_defconfig m68k/PCI: Fix a memory leak in an error handling path
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: "qcom: - new controller driver for IPCC - reorg the of_device data - add support for ipq6018 platform spreadtrum: - new sprd controller driver imx: - implement suspend/resume PM support misc: - make pcc driver struct static - fix return value in imx_mu_scu - disable clock before bailout in imx probe - remove duplicate error mssg in zynqmp probe - fix header size in imx.scu - check for null instead of is-err in zynqmp" * tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: qcom: Add ipq6018 apcs compatible mailbox: qcom: Add clock driver name in apcs mailbox driver data dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag mailbox: imx: Add runtime PM callback to handle MU clocks mailbox: imx: Add context save/restore for suspend/resume MAINTAINERS: Add entry for Qualcomm IPCC driver mailbox: Add support for Qualcomm IPCC dt-bindings: mailbox: Add devicetree binding for Qcom IPCC mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe() mailbox: imx-mailbox: fix scu msg header size check mailbox: sprd: Add Spreadtrum mailbox driver dt-bindings: mailbox: Add the Spreadtrum mailbox documentation mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe() mailbox: imx: Disable the clock on devm_mbox_controller_register() failure mailbox: imx: Fix return in imx_mu_scu_xlate() mailbox: imx: Support runtime PM mailbox: pcc: make pcc_mbox_driver static
-
