- 10 Feb, 2016 10 commits
-
-
Sudeep Dutt authored
This patch moves virtio functionality from the MIC host driver into a separate hardware independent Virtio Over PCIe (VOP) driver. This functionality was introduced in commit f69bcbf3 ("Intel MIC Host Driver Changes for Virtio Devices.") in drivers/misc/mic/host/mic_virtio.c. Apart from being moved into a separate driver the functionality is essentially unchanged. See the above mentioned commit for a description of this functionality. Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sudeep Dutt authored
This patch adds VOP driver data structures used in subsequent patches. These data structures are refactored from similar data structures used in the virtio parts of previous MIC host and card drivers. Signed-off-by:
-
Sudeep Dutt authored
The Virtio Over PCIe (VOP) bus abstracts the low level hardware details like interrupts and mapping remote memory so that the same VOP driver can work without changes with different MIC host or card drivers as long as the hardware bus operations are implemented. The VOP driver registers itself on the VOP bus. The base PCIe drivers implement the bus ops and register VOP devices on the bus, resulting in the VOP driver being probed with the VOP devices. This allows the VOP functionality to be shared between multiple generations of Intel MIC products. Reviewed-by:
-
Sudeep Dutt authored
This patch deletes the virtio functionality from the MIC X100 card driver. A subsequent patch will re-enable this functionality by consolidating the hardware independent logic in a new Virtio over PCIe (VOP) driver. Reviewed-by:
-
Sudeep Dutt authored
This patch deletes the virtio functionality from the MIC X100 host driver. A subsequent patch will re-enable this functionality by consolidating the hardware independent logic in a new Virtio over PCIe (VOP) driver. Reviewed-by:
-
Tomas Winkler authored
The file wd.c was remove from the driver by commit commit fdd9b865 ("mei: wd: drop the watchdog code from the core mei driver") Unfortunately it came back by mistake in rebasing in the commit commit 06ee536b ("mei: fill file pointer in read cb for fixed address client") Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Arnd Bergmann authored
The kernel sometimes fails to link when lkdrm is built-in and compiled with clang: relocation truncated to fit: R_ARM_THM_CALL against `.bss' The reason here is that a relocation from .text to .bss fails to generate a trampoline because .bss is not an executable section. Marking the function 'noinline' turns the relative branch to .bss into an absolute branch to the function argument, and that works fine. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Cory Tusar authored
This commit implements bindings in the eeprom_93xx46 driver allowing device word size and read-only attributes to be specified via devicetree. Signed-off-by:
Cory Tusar <cory.tusar@pid1solutions.com> Tested-by:
Chris Healy <chris.healy@zii.aero> Reviewed-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Cory Tusar authored
This commit documents bindings to be added to the eeprom_93xx46 driver which will allow: - Device word size and read-only attributes to be specified. - A device-specific compatible string for use with Atmel AT93C46D EEPROMs. - Specifying a GPIO line to function as a 'select' or 'enable' signal prior to accessing the EEPROM. Signed-off-by:Rob Herring <robh@kernel.org> Tested-by:
-
Cory Tusar authored
Compatible at93xx46 devices from both Microchip and Atmel expect a word-based address, regardless of whether the device is strapped for 8- or 16-bit operation. However, the offset parameter passed in when reading or writing at a specific location is always specified in terms of bytes. This commit fixes 16-bit read and write accesses by shifting the offset parameter to account for this difference between a byte offset and a word-based address. Signed-off-by:
-
- 08 Feb, 2016 30 commits
-
-
Chen Feng authored
No need to use use continuous memory, it may be fail when memory deeply fragmented. Signed-off-by:
Chen Feng <puck.chen@hisilicon.com> Signed-off-by:
Xia Qing <saberlily.xia@hisilicon.com> Signed-off-by:
-
Bamvor Jian Zhang authored
Compat ioctl is already introduced in drivers/char/ppdev.c in order to fix y2038 issue for PP[GS]ETTIME. There is no need to define these here. Suggested-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by:
-
Bamvor Jian Zhang authored
The arg of ioctl in ppdev is the pointer of integer except the timeval in PPSETTIME, PPGETTIME. Different size of timeval is already supported by the previous patches. So, it is safe to add compat support. Signed-off-by:
-
Bamvor Jian Zhang authored
The y2038 issue for ppdev is changes of timeval in the ioctl (PPSETTIME and PPGETTIME). The size of struct timeval changes from 8bytes to 16bytes due to the changes of time_t. It lead to the changes of the command of ioctl, e.g. for PPGETTIME, We have: on 32-bit (old): 0x80087095 on 32-bit (new): 0x80107095 on 64-bit : 0x80107095 This patch define these two ioctl commands to support the 32bit and 64bit time_t application at the same time. And, introduce pp_set_timeout to remove some duplicated code. Signed-off-by:
-
Luis R. Rodriguez authored
Simplify a few of the *generic* shared dev_warn() and dev_dbg() print messages for three reasons: 0) Historically firmware_class code was added to help get device driver firmware binaries but these days request_firmware*() helpers are being repurposed for general *system data* needed by the kernel. 1) This will also help generalize shared code as much as possible later in the future in consideration for a new extensible firmware API which will enable to separate usermode helper code out as much as possible. 2) Kees Cook pointed out the the prints already have the device associated as dev_*() helpers are used, that should help identify the user and case in which the helpers are used. That should provide enough context and simplifies the messages further. v4: generalize debug/warn messages even further as suggested by Kees Cook. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Cc: Casey Schaufler <casey@schaufler-ca.com> Cc: Ming Lei <ming.lei@canonical.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Vojtěch Pavlík <vojtech@suse.cz> Cc: Kyle McMartin <kyle@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: linux-kernel@vger.kernel.org Signed-off-by:Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Bhumika Goyal authored
Removed braces from single statement if condition.Fixed checkpatch.pl warning. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
LABBE Corentin authored
Some array of const char are not set as const. This patch fix that. Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
Stephen Boyd authored
Add support for more than 128 peripherals by taking a lazy caching approach to the mapping tables. Instead of reading and caching the tables at boot given some fixed size, read them and cache them on an as needed basis. We still assume a max size of 512 peripherals, trading off some space for simplicity. Based on a patch by Gilad Avidov <gavidov@codeaurora.org> and Sagar Dharia <sdharia@codeaurora.org>. Cc: Gilad Avidov <gavidov@codeaurora.org> Cc: Sagar Dharia <sdharia@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Andreas Kemnade authored
hdq_usecount was set to zero after a successful read, so omap_hdq_put could not properly free resources which leads e.g. to increasing usecounts in lsmod output Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Reviewed-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
Geliang Tang <geliangtang@163.com> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
-
Geliang Tang authored
Use to_pci_dev() instead of open-coding it. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Geliang Tang authored
Use to_pci_dev() instead of open-coding it. Signed-off-by:
Martyn Welch <martyn@welchs.me.uk> Signed-off-by:
-
Caesar Wang authored
1) Make the include file to sort from order 2) clean up the driver to make more readability Let's clean up such trivial details. Signed-off-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Caesar Wang authored
this pacthset try to fix the code style for sunxi. Signed-off-by:
-
Srinivas Kandagatla authored
nvmem providers have restrictions on register strides, so return error when users attempt to read/write buffers with sizes which are less than word size. Without this patch the userspace would continue to try as it does not get any error from the nvmem core, resulting in a hang or endless loop in userspace. Reported-by:
Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by:
-
Andrew-CT Chen authored
Add Mediatek EFUSE driver to access hardware data like thermal sensor calibration or HDMI impedance. Signed-off-by:
Andrew-CT Chen <andrew-ct.chen@mediatek.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Andrew-CT Chen authored
Add Mediatek MT8173 EFUSE Devicetree binding file Signed-off-by:
-
Ariel D'Alessandro authored
This commit adds support for NXP LPC18xx EEPROM memory found in NXP LPC185x/3x and LPC435x/3x/2x/1x devices. EEPROM size is 16384 bytes and it can be entirely read and written/erased with 1 word (4 bytes) granularity. The last page (128 bytes) contains the EEPROM initialization data and is not writable. Erase/program time is less than 3ms. The EEPROM device requires a ~1500 kHz clock (min 800 kHz, max 1600 kHz) that is generated dividing the system bus clock by the division factor, contained in the divider register (minus 1 encoded). EEPROM will be kept in Power Down mode except during read/write calls. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
-
Ariel D'Alessandro authored
Add the devicetree binding document for NXP LPC18xx EEPROM memory. Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Geliang Tang authored
Use kobj_to_dev() instead of open-coding it. Signed-off-by:
-
Geliang Tang authored
Use to_i2c_client() instead of open-coding it. Signed-off-by:
-
Ben Hutchings authored
Commit 985087db 'misc: add support for bmp18x chips to the bmp085 driver' changed the BMP085 config symbol to a boolean. I see no reason why the shared code cannot be built as a module, so change it back to tristate. Fixes: 985087db ("misc: add support for bmp18x chips to the bmp085 driver") Cc: Eric Andersson <eric.andersson@unixphere.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
-
Paul Gortmaker authored
The Kconfig currently controlling compilation of this code is: drivers/misc/Kconfig:config ARM_CHARLCD drivers/misc/Kconfig: bool "ARM Ltd. Character LCD Driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and this driver did not have a ".remove" function coded for non-modular drivers either. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We don't replace module.h with init.h since the file already has that. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Paul Burton authored
Allow the pch_phub driver to be build on MIPS platforms, in preparation for its use on the MIPS Boston board. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
-
Sudip Mukherjee authored
The pr_debug() will never be executed. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Matthias Lange authored
Signed-off-by:
Matthias Lange <matthias.lange@kernkonzept.com> Signed-off-by:
-
Sudip Mukherjee authored
Instead of calling release_firmware() on every error and then jumping lets have a common release_firmware() in the error path. This patch also fixes a memory leak where we missed release_firmware() if mic_x100_load_command_line() fails. Signed-off-by:
-
