If a netdev is removed from the lag the lag should be destroyed.
With downstream patches this might trigger a reconfiguration of
representors on a different eswitch and such we don't have the proper
locking to so from this path. Move the destruction to be done by the
workqueue.

As the destruction won't affect the netdev side it okay to do so.
The RDMA side will be reconfigured and it already coded to handle such
reconfiguration.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently when doing hardware lag we check the eswitch mode
but as this isn't done under a lock the check isn't valid.

As the code needs to sync between two different devices an extra
care is needed.

- When going to change eswitch mode, if hardware lag is active destroy it.
- While changing eswitch modes block any hardware bond creation.
- Delay handling bonding events until there are no mode changes in
  progress.
- When attaching a new mdev to lag, block until there is no mode change
  in progress. In order for the mode change to finish the interface lock
  will have to be taken. Release the lock and sleep for 100ms to
  allow forward progress. As this is a very rare condition (can happen if
  the user unbinds and binds a PCI function while also changing eswitch
  mode of the other PCI function) it has no real world impact.

As taking multiple eswitch mode locks is now required lockdep will
complain about a possible deadlock. Register a key per eswitch to make
lockdep happy.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When two mlx5 devices are paired in switchdev mode, always offload the
send-to-vport rule to the peer E-Switch. This allows to abstract
the logic when this is really necessary (single FDB) and combine
the logic of both cases into one.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This callback will allow to notify representors about relevant events
when in OFFLOADS mode. In downstream patches, this will be used to notify
about PAIR/UNPAIR devcom events.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

FTEs are added with mapped metadata which is saved per eswitch.
When uplink reps are bonded and we are in a single FDB mode,
we could fail to find metadata which was stored on one eswitch mapping
but not the other or with a different id.
To resolve this issue use shared mapping between eswitch ports.
We do not have any conflict using a single mapping, for a type,
between the ports.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The shared mapping is identified by an id and type.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Set the flow source param to local vport for the uplink rep
send-to-vport rule.

This will comply with the recent changes in SW steering that
use the flow source as an indication for the rule type - rx or tx.

Since the uplink send-to-vport rule is forwarding traffic to the wire
it has to indicate that it is an sx rule and can't use the any port
value in the flow source.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Shared FDB allows to create a single RDMA device that holds representors
from both eswitches. As shared FDB is only active when both uplink
representors are enslaved there is a single RDMA port that represents
both uplinks.

The number of ports is the number of vports on both eswitches minus one
as we only need 1 port for both uplinks.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In shared FDB there is only one eswitch which is active and it receives
traffic from all representors and all vports in the HCA.

While the Ethernet representor will always reside on its native PF
the IB representor will not. Extend send to vport rule creation to
support such flows. Need to account for source vport that sends the
traffic (on which the representors resides) and the target eswitch
the traffic which reach.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In shared FDB a single RDMA device can have representors that are
connected to two different eswitches. Use the right eswitch when
preparing the response to userspace.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

As shared FDB requires changes in two subsystems first expose the needed
core functions so the RDMA side can be changed.

mlx5_lag_is_master(): return true if a given mlx5 device is the lag master.
mlx5_lag_is_shared_fdb(): Returns true if the lag mode is shared FDB.
mlx5_lag_get_peer_mdev(): Return the peer mdev in lag.

The mentioned functions will be used by downstream patches in order
to add support for shared FDB for the RDMA side.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Export a function so users can retrieve the mellanox device that manages
the eswitch from the eswitch device.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

is_apu_thread_cq() used to detect CQs which are attached to APU
threads. This was extended to support other elements as well,
so the function was renamed to is_apu_cq().

c_eqn_or_apu_element was extended from 8 bits to 32 bits, which wan't
reflected when the APU support was first introduced.

Acked-by: Michael S. Tsirkin <mst@redhat.com> # vdpa
Signed-off-by: Tal Gilboa <talgi@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

This fields will be needed when adding a support for DCS offload

max_dci_stream_channels - maximum DCI stream channels supported per DCI.
max_dci_errored_streams - maximum DCI error stream channels
supported per DCI before a DCI move to error state.
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.

Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.

It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped.  Refine the tests.

There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.

(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)

Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.

TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull irq fixes from Ingo Molnar:
 "Two fixes:

   - Fix a MIPS IRQ handling RCU bug

   - Remove a DocBook annotation for a parameter that doesn't exist
     anymore"

* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
  genirq/irqdesc: Drop excess kernel-doc entry @lookup

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - Fix load tracking bug/inconsistency

   - Fix a sporadic CFS bandwidth constraints enforcement bug

   - Fix a uclamp utilization tracking bug for newly woken tasks"

* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Ignore max aggregation if rq is idle
  sched/fair: Fix CFS bandwidth hrtimer expiry type
  sched/fair: Sync load_sum with load_avg after dequeue

Pull perf fixes from Ingo Molnar:
 "A fix and a hardware-enablement addition:

   - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup

   - Add cstate event support for Intel ICELAKE_X and ICELAKE_D"

* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Clean up error handling path of iio mapping
  perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support

Pull locking fixes from Ingo Molnar:

 - Fix a Sparc crash

 - Fix a number of objtool warnings

 - Fix /proc/lockdep output on certain configs

 - Restore a kprobes fail-safe

* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: sparc: Fix arch_cmpxchg64_local()
  kprobe/static_call: Restore missing static_call_text_reserved()
  static_call: Fix static_call_text_reserved() vs __init
  jump_label: Fix jump_label_text_reserved() vs __init
  locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes and clean ups in the core and various
  drivers.

  The only core change in behaviour is the I/O retry for spinup notify,
  but that shouldn't impact anything other than the failing case"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  scsi: virtio_scsi: Add validation for residual bytes from response
  scsi: ipr: System crashes when seeing type 20 error
  scsi: core: Retry I/O for Notify (Enable Spinup) Required error
  scsi: mpi3mr: Fix warnings reported by smatch
  scsi: qedf: Add check to synchronize abort and flush
  scsi: MAINTAINERS: Add mpi3mr driver maintainers
  scsi: libfc: Fix array index out of bound exception
  scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
  scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
  scsi: qedf: Use DEVICE_ATTR_RO() macro
  scsi: qedi: Use DEVICE_ATTR_RO() macro
  scsi: message: mptfc: Switch from pci_ to dma_ API
  scsi: be2iscsi: Fix some missing space in some messages
  scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
  scsi: ufs: Fix build warning without CONFIG_PM
  scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
  scsi: qla2xxx: Add heartbeat check
  scsi: virtio_scsi: Do not overwrite SCSI status
  scsi: libsas: Add LUN number check in .slave_alloc callback
  scsi: core: Inline scsi_mq_alloc_queue()
  ...

Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Enable use of BPF counters with 'perf stat --for-each-cgroup',
     using per-CPU 'cgroup-switch' events with an attached BPF program
     that does aggregation per-cgroup in the kernel instead of using
     per-cgroup perf events.

   - Add Topdown metrics L2 events as default events in 'perf stat' for
     systems having those events.

  Hardware tracing:

   - Add a config for max loops without consuming a packet in the Intel
     PT packet decoder, set via 'perf config intel-pt.max-loops=N'

  Hardware enablement:

   - Disable misleading NMI watchdog message in 'perf stat' on hybrid
     systems such as Intel Alder Lake.

   - Add a dummy event on hybrid systems to collect metadata records.

   - Add 24x7 nest metric events for the Power10 platform.

  Fixes:

   - Fix event parsing for PMUs starting with the same prefix.

   - Fix the 'perf trace' 'trace' alias installation dir.

   - Fix buffer size to report iregs in perf script python scripts,
     supporting the extended registers in PowerPC.

   - Fix overflow in elf_sec__is_text().

   - Fix 's' on source line when disasm is empty in the annotation TUI,
     accessible via 'perf annotate', 'perf report' and 'perf top'.

   - Plug leaks in scandir() returned dirent entries in 'perf test' when
     sorting the shell tests.

   - Fix --task and --stat with pipe input in 'perf report'.

   - Fix 'perf probe' use of debuginfo files by build id.

   - If a DSO has both dynsym and symtab ELF sections, read from both
     when loading the symbol table, fixing a problem processing Fedora
     32 glibc DSOs.

  Libraries:

   - Add grouping of events to libperf, from code in tools/perf,
     allowing libperf users to use that mode.

  Misc:

   - Filter plt stubs from the 'perf probe --functions' output.

   - Update UAPI header copies for asound, DRM, mman-common.h and the
     ones affected by the quotactl_fd syscall"

* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
  perf test: Add free() calls for scandir() returned dirent entries
  libperf: Add tests for perf_evlist__set_leader()
  libperf: Remove BUG_ON() from library code in get_group_fd()
  libperf: Add group support to perf_evsel__open()
  perf tools: Fix pattern matching for same substring in different PMU type
  perf record: Add a dummy event on hybrid systems to collect metadata records
  perf stat: Add Topdown metrics L2 events as default events
  libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
  libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
  libperf: Move 'leader' from tools/perf to perf_evsel::leader
  libperf: Move 'idx' from tools/perf to perf_evsel::idx
  libperf: Change tests to single static and shared binaries
  perf intel-pt: Add a config for max loops without consuming a packet
  perf stat: Disable the NMI watchdog message on hybrid
  perf vendor events power10: Adds 24x7 nest metric events for power10 platform
  perf script python: Fix buffer size to report iregs in perf script
  perf trace: Fix the perf trace link location
  perf top: Fix overflow in elf_sec__is_text()
  perf annotate: Fix 's' on source line when disasm is empty
  perf probe: Do not show @plt function by default
  ...

Pull RTC updates from Alexandre Belloni:
 "Mostly documentation/comment changes and non urgent fixes.

   - add or fix SPDX identifiers

   - NXP pcf*: fix datasheet URLs

   - imxdi: add wakeup support

   - pcf2127: handle timestamp interrupts, this fixes a possible
     interrupt storm

   - bd70528: Drop BD70528 support"

* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: pcf8523: rename register and bit defines
  rtc: pcf2127: handle timestamp interrupts
  rtc: at91sam9: Remove unnecessary offset variable checks
  rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
  rtc: spear: convert to SPDX identifier
  rtc: tps6586x: convert to SPDX identifier
  rtc: tps80031: convert to SPDX identifier
  rtc: rtd119x: Fix format of SPDX identifier
  rtc: sc27xx: Fix format of SPDX identifier
  rtc: palmas: convert to SPDX identifier
  rtc: max6900: convert to SPDX identifier
  rtc: ds1374: convert to SPDX identifier
  rtc: au1xxx: convert to SPDX identifier
  rtc: pcf85063: Update the PCF85063A datasheet revision
  dt-bindings: rtc: ti,bq32k: take maintainership
  rtc: pcf8563: Fix the datasheet URL
  rtc: pcf85063: Fix the datasheet URL
  rtc: pcf2127: Fix the datasheet URL
  dt-bindings: rtc: ti,bq32k: Convert to json-schema
  dt-bindings: rtc: rx8900: Convert to YAML schema
  ...

Commit dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.

A superior workaround is achieved with commit a0b8200d ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").

This patch reverts the dummy field and the pahole version check.

Fixes: dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.

Fixes: 7fd70c65 ("ARM: irqstat: Get rid of duplicated declaration")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com

Pull cifs fixes from Steve French:
 "13 cifs/smb3 fixes. Most are to address minor issues pointed out by
  Coverity.

  Also includes a packet signing enhancement and mount improvement"

* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal version number
  cifs: prevent NULL deref in cifs_compose_mount_options()
  SMB3.1.1: Add support for negotiating signing algorithm
  cifs: use helpers when parsing uid/gid mount options and validate them
  CIFS: Clarify SMB1 code for POSIX Lock
  CIFS: Clarify SMB1 code for rename open file
  CIFS: Clarify SMB1 code for delete
  CIFS: Clarify SMB1 code for SetFileSize
  smb3: fix typo in header file
  CIFS: Clarify SMB1 code for UnixSetPathInfo
  CIFS: Clarify SMB1 code for UnixCreateSymLink
  cifs: clarify SMB1 code for UnixCreateHardLink
  cifs: make locking consistent around the server session status

Pull pci fix from Bjorn Helgaas:
 "Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
  broke ppc:sam460ex (Bjorn Helgaas)"

* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Coalesce host bridge contiguous apertures"

Pull i3c updates from Alexandre Belloni:

 - two small fixes to the svc driver

* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: fix doc warning in svc-i3c-master.c
  i3c: master: svc: drop free_irq of devm_request_irq allocated irq

Pull thermal updates from Daniel Lezcano:

 - Add rk3568 sensor support (Finley Xiao)

 - Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan
   Zhang)

 - Export additionnal attributes for the int340x thermal processor
   (Srinivas Pandruvada)

 - Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra
   Kamble)

 - Fix kernel documentation for thermal_zone_device_unregister() and use
   devm_platform_get_and_ioremap_resource() (Yang Yingliang)

 - Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas
   Söderlund)

 - Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven)

 - Add missing of_node_put() for the iMX and Spreadtrum sensors
   (Krzysztof Kozlowski)

 - Add tegra3 thermal sensor DT bindings (Dmitry Osipenko)

 - Stop the thermal zone monitoring when unregistering it to prevent a
   temperature update without the 'get_temp' callback (Dmitry Osipenko)

 - Add rk3568 DT bindings, convert bindings to yaml schemas and add the
   corresponding compatible in the Rockchip sensor (Ezequiel Garcia)

 - Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)

 - Use the find_first_zero_bit() function instead of custom code (Andy
   Shevchenko)

 - Fix the kernel doc for the device cooling device (Yang Li)

 - Reorg the processor thermal int340x to set the scene for the PCI mmio
   driver (Srinivas Pandruvada)

 - Add PCI MMIO driver for the int340x processor thermal driver
   (Srinivas Pandruvada)

 - Add hwmon sensors for the mediatek sensor (Frank Wunderlich)

 - Fix warning for return value reported by Smatch for the int340x
   thermal processor (Srinivas Pandruvada)

 - Fix wrong register access and decoding for the int340x thermal
   processor (Srinivas Pandruvada)

* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
  thermal/drivers/int340x/processor_thermal: Fix tcc setting
  thermal/drivers/int340x/processor_thermal: Fix warning for return value
  thermal/drivers/mediatek: Add sensors-support
  thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
  thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
  thermal: devfreq_cooling: Fix kernel-doc
  thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
  dt-bindings: thermal: tsens: Add sc8180x compatible
  dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
  dt-bindings: thermal: convert rockchip-thermal to json-schema
  thermal/core/thermal_of: Stop zone device before unregistering it
  dt-bindings: thermal: Add binding for Tegra30 thermal sensor
  thermal/drivers/sprd: Add missing of_node_put for loop iteration
  thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
  thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
  thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
  thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
  thermal/core: Correct function name thermal_zone_device_unregister()
  dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
  thermal/drivers/int340x: processor_thermal: Export additional attributes
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Increase the -falign-functions alignment for the debug option.

 - Remove ugly libelf checks from the top Makefile.

 - Make the silent build (-s) more silent.

 - Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.

 - Various script cleanups

* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
  scripts: add generic syscallnr.sh
  scripts: check duplicated syscall number in syscall table
  sparc: syscalls: use pattern rules to generate syscall headers
  parisc: syscalls: use pattern rules to generate syscall headers
  nds32: add arch/nds32/boot/.gitignore
  kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
  kbuild: modpost: Explicitly warn about unprototyped symbols
  kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
  kconfig.h: explain IS_MODULE(), IS_ENABLED()
  kconfig: constify long_opts
  scripts/setlocalversion: simplify the short version part
  scripts/setlocalversion: factor out 12-chars hash construction
  scripts/setlocalversion: add more comments to -dirty flag detection
  scripts/setlocalversion: remove workaround for old make-kpkg
  scripts/setlocalversion: remove mercurial, svn and git-svn supports
  kbuild: clean up ${quiet} checks in shell scripts
  kbuild: sink stdout from cmd for silent build
  init: use $(call cmd,) for generating include/generated/compile.h
  kbuild: merge scripts/mkmakefile to top Makefile
  sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
  ...

Pull more s390 updates from Vasily Gorbik:

 - Fix preempt_count initialization.

 - Rework call_on_stack() macro to add proper type handling and avoid
   possible register corruption.

 - More error prone "register asm" removal and fixes.

 - Fix syscall restarting when multiple signals are coming in. This adds
   minimalistic trampolines to vdso so we can return from signal without
   using the stack which requires pgm check handler hacks when NX is
   enabled.

 - Remove HAVE_IRQ_EXIT_ON_IRQ_STACK since this is no longer true after
   switch to generic entry.

 - Fix protected virtualization secure storage access exception
   handling.

 - Make machine check C handler always enter with DAT enabled and move
   register validation to C code.

 - Fix tinyconfig boot problem by avoiding MONITOR CALL without
   CONFIG_BUG.

 - Increase asm symbols alignment to 16 to make it consistent with
   compilers.

 - Enable concurrent access to the CPU Measurement Counter Facility.

 - Add support for dynamic AP bus size limit and rework ap_dqap to deal
   with messages greater than recv buffer.

* tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
  s390: preempt: Fix preempt_count initialization
  s390/linkage: increase asm symbols alignment to 16
  s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
  s390: add type checking to CALL_ON_STACK_NORETURN() macro
  s390: remove old CALL_ON_STACK() macro
  s390/softirq: use call_on_stack() macro
  s390/lib: use call_on_stack() macro
  s390/smp: use call_on_stack() macro
  s390/kexec: use call_on_stack() macro
  s390/irq: use call_on_stack() macro
  s390/mm: use call_on_stack() macro
  s390: introduce proper type handling call_on_stack() macro
  s390/irq: simplify on_async_stack()
  s390/irq: inline do_softirq_own_stack()
  s390/irq: simplify do_softirq_own_stack()
  s390/ap: get rid of register asm in ap_dqap()
  s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
  s390: move restart of execve() syscall
  s390/signal: remove sigreturn on stack
  s390/signal: switch to using vdso for sigreturn and syscall restart
  ...

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix for accesing gic via vdso

 - two build fixes

* tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: vdso: Invalid GIC access through VDSO
  mips: disable branch profiling in boot/decompress.o
  mips: always link byteswap helpers into decompressor

Pull ARM defconfig updates from "Olof Johansson
 "A set of defconfig changes, we keep them in a separate branch to avoid
  conflicts between topics by separating them out.

  These changes are almost exclusively turning on new drivers for
  various platforms, or turning on modules for new drivers for the
  shared generic configs"

* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
  arm64: defconfig: Enable renesas usb xhci pci host controller
  arm64: defconfig: Visconti: Enable GPIO
  arm64: defconfig: Visconti: Enable PWM
  arm64: defconfig: add drivers needed for DragonBoard410c
  ARM: config: aspeed: Add DEBUG_FS and EXT4
  ARM: ixp4xx_defconfig: add MTD_PHYSMAP
  ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
  ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
  ARM: exynos_defconfig: restore framebuffer support
  arm64: defconfig: Enable ARCH_R9A07G044
  ARM: configs: at91_dt_defconfig: configs for sam9x60
  arm64: defconfig: Enable Exynos UFS driver
  arm64: defconfig: qcom: enable interconnect for SM8350
  ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
  arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
  arm64: defconfig: enable Layerscape EDAC driver
  ARM: omap2plus_defconfig: Add LP5523 LED driver
  ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
  ARM: shmobile: defconfig: Refresh for v5.13-rc1
  arm64: defconfig: Allow Mediatek boards to boot from the mmc
  ...

Pull ARM driver updates from Olof Johansson:

 - Reset controllers: Adding support for Microchip Sparx5 Switch.

 - Memory controllers: ARM Primecell PL35x SMC memory controller driver
   cleanups and improvements.

 - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.

 - Rockchip: RK3568 power domains support + DT binding updates,
   cleanups.

 - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
   including support for MSM8226, MDM9607, SM6125 and SC8180X.

 - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
   interfaces and communication (including bus model) between partitions
   both in Normal and Secure Worlds.

 - Tegra Memory controller changes, including major rework to deal with
   identity mappings at boot and integration with ARM SMMU pieces.

* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
  firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
  firmware: turris-mox-rwtm: show message about HWRNG registration
  firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
  firmware: turris-mox-rwtm: report failures better
  firmware: turris-mox-rwtm: fix reply status decoding function
  soc: imx: gpcv2: add support for i.MX8MN power domains
  dt-bindings: add defines for i.MX8MN power domains
  firmware: tegra: bpmp: Fix Tegra234-only builds
  iommu/arm-smmu: Use Tegra implementation on Tegra186
  iommu/arm-smmu: tegra: Implement SID override programming
  iommu/arm-smmu: tegra: Detect number of instances at runtime
  dt-bindings: arm-smmu: Add Tegra186 compatible string
  firmware: qcom_scm: Add MDM9607 compatible
  soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
  soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
  soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
  dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
  memory: emif: remove unused frequency and voltage notifiers
  memory: fsl_ifc: fix leak of private memory on probe failure
  memory: fsl_ifc: fix leak of IO mapping on probe failure
  ...

Pull ARM devicetree updates from Olof Johansson:
 "Like always, the DT branch is sizable. There are numerous additions
  and fixes to existing platforms, but also a handful of new ones
  introduced. Less than some other releases, but there's been
  significant work on cleanups, refactorings and device enabling on
  existing platforms.

  A non-exhaustive list of new material:

   - Refactoring of BCM2711 dtsi structure to add support for the
     Raspberry Pi 400

   - Rockchip: RK3568 SoC and EVB, video codecs for
     rk3036/3066/3188/322x

   - Qualcomm: SA8155p Automotive platform (SM8150 derivative),
     SM8150/8250 enhancements and support for Sony Xperia 1/1II and
     5/5II

   - TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
     definitions

   - TI OMAP: Various cleanups

   - Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194

   - Qualcomm: lots of additions for peripherals across several SoCs,
     and new support for Microsoft Surface Duo (SM8150-based), Huawei
     Ascend G7.

   - i.MX: Numerous additions of features across SoCs and boards.

   - Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
     NanoPi R1S H5 boards

   - MediaTek: More device bindings for mt8167, new Chromebook system
     variants for mt8183

   - Renesas: RZ/G2L SoC and EVK added

   - Amlogic: BananaPi BPI-M5 board added"

* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
  arm64: dts: rockchip: add basic dts for RK3568 EVB
  arm64: dts: rockchip: add core dtsi for RK3568 SoC
  arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
  ARM: dts: rockchip: add vpu and vdec node for RK322x
  ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
  ARM: dts: rockchip: add vpu node for RK3036
  arm64: dts: ipq8074: Add QUP6 I2C node
  arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
  arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
  arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
  arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
  arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
  arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
  arm64: dts: rockchip: add SPDIF node for rk3399-firefly
  arm64: dts: rockchip: Add Rotation Property for OGA Panel
  arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
  arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
  arm64: dts: qcom: sm8250-edo: Enable GPI DMA
  arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
  arm64: dts: qcom: sm8250-edo: Enable PCIe
  ...

Pull ARM SoC updates from Olof Johansson:
 "A few SoC (code) changes have queued up this cycle, mostly for minor
  changes and some refactoring and cleanup of legacy platforms. This
  branch also contains a few of the fixes that weren't sent in by the
  end of the release (all fairly minor).

   - Adding an additional maintainer for the TEE subsystem (Sumit Garg)

   - Quite a significant modernization of the IXP4xx platforms by Linus
     Walleij, revisiting with a new PCI host driver/binding, removing
     legacy mach/* include dependencies and moving platform
     detection/config to drivers/soc. Also some updates/cleanup of
     platform data.

   - Core power domain support for Tegra platforms, and some
     improvements in build test coverage by adding stubs for compile
     test targets.

   - A handful of updates to i.MX platforms, adding legacy (non-PSCI)
     SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
     data and board fixups for iMX6/7.

  ... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
  Rockchip"

* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
  MAINTAINERS: Add myself as TEE subsystem reviewer
  ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
  hw_random: ixp4xx: Add OF support
  hw_random: ixp4xx: Add DT bindings
  hw_random: ixp4xx: Turn into a module
  hw_random: ixp4xx: Use SPDX license tag
  hw_random: ixp4xx: enable compile-testing
  pata: ixp4xx: split platform data to its own header
  soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
  PCI: ixp4xx: Add a new driver for IXP4xx
  PCI: ixp4xx: Add device tree bindings for IXP4xx
  ARM/ixp4xx: Make NEED_MACH_IO_H optional
  ARM/ixp4xx: Move the virtual IObases
  MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
  ARM: debug: add UART early console support for MSTAR SoCs
  ARM: dts: ux500: Fix LED probing
  ARM: imx: add smp support for imx7d
  ARM: imx6q: drop of_platform_default_populate() from init_machine
  arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
  soc/tegra: fuse: Fix Tegra234-only builds
  ...

Pull memblock fix from Mike Rapoport:
 "This is a fix for the rework of ARM's pfn_valid() implementation
  merged during this merge window.

  Don't abuse pfn_valid() to check if pfn is in RAM

  The semantics of pfn_valid() is to check presence of the memory map
  for a PFN and not whether a PFN is in RAM. The memory map may be
  present for a hole in the physical memory and if such hole corresponds
  to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
  fail.

  Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
  is in RAM or not"

* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM