- 19 May, 2010 40 commits
-
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Currently raw and sliced vbi is setup using the video g/s_fmt ops. However, we want to split off the vbi formatting into separate ops so the first step is to create those new ops. The next step will be to convert subdev drivers and bridge drivers to use the new ops. And in the final step we can start converting the video g/s_fmt ops to the new (and more appropriate) mediabus format ops. Signed-off-by:
-
Hans Verkuil authored
Only a relatively small number of video receivers and transmitters actually support VBI. So start moving the vbi specific ops to an ops struct of their own. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Laurent Pinchart authored
The web site has moved to a new location, update the MAINTAINERS file. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The control step values reported by the device are used as a divisor unchecked, which can result in a division by zero. Check the step value and make it 1 when null. Signed-off-by:
-
Laurent Pinchart authored
The UVC relative controls (exposure time, iris, focus, zoom, pan/tilt) are write-only (despite the UVC specification stating that the GET_CUR request is mandatory). Mark the controls as such, and report the related V4L2 controls V4L2_CTRL_FLAG_WRITE_ONLY. Signed-off-by:
-
Laurent Pinchart authored
The Miricle 307K (17dc:0202) camera reports a 16-bit greyscale format, support it in the driver. Signed-off-by:
-
Randy Dunlap authored
vivi uses find_font(), which is only available when FONTS is enabled, so make vivi depend on FONTS. ERROR: "find_font" [drivers/media/video/vivi.ko] undefined! Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Dmitri Belimov authored
[dougsland@redhat.com: Fixed cards numbers reject due changes in saa7134.h] Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Dmitri Belimov authored
Set correct GPIO number for BEHOLD_WANDER/VOYAGER Add xc5000 callback function Small rework tm6000_cards_setup function Small rework tm6000_config_tuner, build mode_mask by config information Rework for support xc5000 silicon tuner Add some information messages for more better understand an errors. [mchehab@redhat.com: Fix CodingStyle and merge conflicts] Signed-off-by:
-
Pawel Osciak authored
According to the V4L2 specification, poll() should set POLLOUT | POLLWRNORM flags for output devices after the frame has been displayed. Signed-off-by:
Pawel Osciak <p.osciak@samsung.com> Reviewed-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
-
Arnout Vandecappelle authored
videobuf_pages_to_sg() and videobuf_vmalloc_to_sg() happen to create a scatterlist element for every page. However, this is not true for bus addresses, so other functions shouldn't rely on the length of the scatter list being equal to nr_pages. Signed-off-by: -
Mauro Carvalho Chehab authored
videobuf-core checks if .sync ops is defined before calling. So, we don't need a do-nothing function. Signed-off-by: -
Mauro Carvalho Chehab authored
While analyzing one of the videobuf patches, I noticed that videobuf_dma_sync is only used internally inside videobuf-dma-sg. So, let's remove this function, merging the code at __videobuf_dma_sync() Signed-off-by: -
Pawel Osciak authored
Add documentation for V4L2_BUF_FLAG_ERROR. Signed-off-by:
-
Hans Verkuil authored
For recoverable stream errors dqbuf() now returns 0 and the error flag is set instead of returning EIO. Signed-off-by:
-
Pawel Osciak authored
This flag is intended to indicate streaming errors, which might have resulted in corrupted video data in the buffer, but the buffer can still be reused and streaming may continue. Setting this flag and returning 0 is different from returning EIO. The latter should now indicate more serious (unrecoverable) errors. This patch also solves a problem with the ioctl handling code in vl42-ioctl.c, which does not copy buffer identification data back to the userspace when EIO is returned, so there is no way for applications to discover on which buffer the operation failed in such cases. Signed-off-by:
-
Ricardo Maraschini authored
Signed-off-by:
Ricardo Maraschini <ricardo.maraschini@gmail.com> Signed-off-by:
-
sai authored
This is a patch to the cx25821-i2c.c file that fixes warning and errors found by checkpatch.pl tool [mchehab@redhat.com: fix conflicts with changeset 2587a7ef7b8bc3c7db7c43659297b45b168922ab] Signed-off-by: sai<tsg321@gmail.com> Signed-off-by: -
sai authored
This patch fixes all the coding style issues reported by checkpatch.pl tool Signed-off-by:
sai <tsg321@gmail.com> Signed-off-by:
-
sai gopal authored
This is a patch to cx25821-alsa.c file that fixes of most of the warning & errors found by checkpatch.pl tool [mchehab@redhat.com: Fix conflicts with changeset 4e0c923a0d23f86c7331b32bc2aeb280e10e029e] Signed-off-by:
-
Jiri Slaby authored
Stanse found that in gp8psk_load_bcm4500fw there is missing a check for return value of kmalloc. Add one and bail out appropriatelly. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Randy Dunlap authored
This patch reduces static stack usage of one of the 2 top offenders as listed by 'make checkstack': Building with CONFIG_FRAME_WARN=2048 produces: drivers/media/dvb/frontends/dib3000mc.c:853: warning: the frame size of 2224 bytes is larger than 2048 bytes and in 'make checkstack', the stack usage goes from: 0x00000bbd dib3000mc_i2c_enumeration [dib3000mc]: 2232 to unlisted with this patch. I don't have the hardware that is needed to test this patch. Signed-off-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
-
Randy Dunlap authored
This patch reduces static stack usage of one of the 2 top offenders as listed by 'make checkstack': Building with CONFIG_FRAME_WARN=2048 produces: drivers/media/dvb/frontends/dib7000p.c:1367: warning: the frame size of 2320 bytes is larger than 2048 bytes and in 'make checkstack', the stack usage goes from: 0x00002409 dib7000p_i2c_enumeration [dib7000p]: 2328 to unlisted with this patch. Also change one caller of dib7000p_i2c_enumeration() to check its return value. I don't have the hardware that is needed to test this patch. Signed-off-by:
-
Michael Müller authored
This patch introduces support for DVB-T for the following dibcom based card: Elgato EyeTV Diversity (USB-ID: 0fd9:0011) Support for the Elgato silver IR remote is added too (set parameter dvb_usb_dib0700_ir_proto=0) [w.sang@pengutronix.de: rebased to current linuxtv-master] Signed-off-by:
Michael Müller <mueller_michael@alice-dsl.net> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Signed-off-by:
-
Kirill Smelkov authored
I have 3 IVC-200 cards (with 4 video channels on each). 2 of the cards identify theirselves as 000[0-3]:a155 (ids already in cardlist) and another one identifies itself as 080[0-3]:a155, which ids were unknown so far. Note - it's IVC-200, not IVC-200G. Signed-off-by:
Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by:
-
Pierre Gronlier authored
This patch retrieve the correct mac address from the eeprom for TeVii S470 card. Signed-off-by:
Pierre Gronlier <pierre.gronlier@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Serialize DVB initialization, to avoid it to happen while analog initialization is still happening. Signed-off-by: -
Istvan Varga authored
In cx88-mpeg.c, there is code that sets core->input to CX88_VMUX_DVB. However, this may be incorrect, since core->input is actually an index to core->board.input[], which has not enough elements to be indexed by the value of CX88_VMUX_DVB. So, the modified code searches core->board.input[] for an input with a type of CX88_VMUX_DVB, and if it does not find one, the index is simply set to zero. The change may not have much effect, though, since it appears the only case when core->input is actually used is when the current input is being queried. Signed-off-by:
Istvan Varga <istvanv@users.sourceforge.net> Signed-off-by:
-
Jarod Wilson authored
Simplified from version 1, in that hacks heisted from ati_remote2.c aren't actually necessary, the real fix for too many repeats was from setting too long a timer release value (200ms) on repeats in mce mode -- this patch drops the release timeout to 33ms, matching the input subsystem default input_dev->rep[REP_PERIOD]. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
This is a follow-up to my prior patch implementing ir-core's change_protocol functionality in the imon driver, which eliminates a false warning when change_protocol is called without a specific protocol selected yet (i.e., still IR_TYPE_UNKNOWN). It also removes some extraneous blank lines getting spewn into dmesg. Signed-off-by:
-
David Härdeman authored
Convert drivers/media/video/cx231xx/cx231xx-input.c to not rely on ir-functions.c. (I do not have the hardware so I can only compile test this) Signed-off-by:
David Härdeman <david@hardeman.nu> Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by:
-
David Härdeman authored
Pulse-distance is not a protocol, it is a line coding (used by some protocols, like NEC). Looking at the uses of IR_TYPE_PD, the real protocol seems to be NEC in all cases (drivers/media/video/cx88/cx88-input.c is the only user). So, remove IR_TYPE_PD while it is still easy to do so. Signed-off-by:
-
Jarod Wilson authored
Drop the imon driver's internal protocol definitions in favor of using those provided by ir-core. Should make ir-keytable Just Work for switching protocol on the fly on the imon devices that support both the native imon remotes and mce remotes. The imon-no-pad-stabilize pseudo-protocol was dropped as a protocol, and converted to a separate modprobe option (which it probably should have been in the first place). On the TODO list is to convert this to an as yet unwritten protocol-specific options framework. While the mce remotes obviously map to IR_TYPE_RC6, I've yet to look at what the actual ir signals from the native imon remotes are, so for the moment, imon native ir is mapped to IR_TYPE_OTHER. Nailing it down more accurately is also on the TODO list. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by:
-
Sakari Ailus authored
spin_is_locked() always returns zero when spinlock debugging is disabled on a single CPU machine. Replace WARN_ON() with assert_spin_locked(). Thanks to Laurent Pinchart for spotting this! Signed-off-by:
-
Mauro Carvalho Chehab authored
Randy Dunlap <randy.dunlap@oracle.com> reported a breakage while compiling drivers/staging/tm6000, due to this change: commit 1c1b78bee1a94f98deeb9c24b21c4812e191646c Author: Greg Kroah-Hartman <gregkh@suse.de> Date: Thu Apr 29 15:46:07 2010 -0700 USB: remove unused usb_buffer_alloc and usb_buffer_free macros Now that all callers are converted over, remove the compatibility functions and all is good. As the function got renamed, the rename should also be applied at tm6000. Acked-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
