- 09 May, 2017 21 commits
-
-
Yazen Ghannam authored
commit 29f72ce3 upstream. MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name. However, MCA bank 3 is defined on Fam17h systems and can be accessed using legacy MSRs. Without a name we get a stack trace on Fam17h systems when trying to register sysfs files for bank 3 on kernels that don't recognize Scalable MCA. Call MCA bank 3 "decode_unit" since this is what it represents on Fam17h. This will allow kernels without SMCA support to see this bank on Fam17h+ and prevent the stack trace. This will not affect older systems since this bank is reserved on them, i.e. it'll be ignored. Tested on AMD Fam15h and Fam17h systems. WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal kobject: (ffff88085bb256c0): attempted to be registered with empty name! ... Call Trace: kobject_add_internal kobject_add kobject_create_and_add threshold_create_device threshold_init_device Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Sebastian Siewior authored
commit 9cd9a21c upstream. In commit 6afaf8a4 ("UBI: flush wl before clearing update marker") I managed to trigger and fix a similar bug. Now here is another version of which I assumed it wouldn't matter back then but it turns out UBI has a check for it and will error out like this: |ubi0 warning: validate_vid_hdr: inconsistent used_ebs |ubi0 error: validate_vid_hdr: inconsistent VID header at PEB 592 All you need to trigger this is? "ubiupdatevol /dev/ubi0_0 file" + a powercut in the middle of the operation. ubi_start_update() sets the update-marker and puts all EBs on the erase list. After that userland can proceed to write new data while the old EB aren't erased completely. A powercut at this point is usually not that much of a tragedy. UBI won't give read access to the static volume because it has the update marker. It will most likely set the corrupted flag because it misses some EBs. So we are all good. Unless the size of the image that has been written differs from the old image in the magnitude of at least one EB. In that case UBI will find two different values for `used_ebs' and refuse to attach the image with the error message mentioned above. So in order not to get in the situation, the patch will ensure that we wait until everything is removed before it tries to write any data. The alternative would be to detect such a case and remove all EBs at the attached time after we processed the volume-table and see the update-marker set. The patch looks bigger and I doubt it is worth it since usually the write() will wait from time to time for a new EB since usually there not that many spare EB that can be used. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Arnd Bergmann authored
commit fe8c470a upstream. gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16 (ACPI: Fix incompatibility with mcount-based function graph tracing) Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Thorsten Leemhuis authored
commit 704de489 upstream. Temporary got a Lifebook E547 into my hands and noticed the touchpad only works after running: echo "1" > /sys/devices/platform/i8042/serio2/crc_enabled Add it to the list of machines that need this workaround. Signed-off-by:
Thorsten Leemhuis <linux@leemhuis.info> Reviewed-by:
Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 396e287f upstream. vmbus_teardown_gpadl() can result in infinite wait when it is called on 5 second timeout in vmbus_open(). The issue is caused by the fact that gpadl teardown operation won't ever succeed for an opened channel and the timeout isn't always enough. As a guest, we can always trust the host to respond to our request (and there is nothing we can do if it doesn't). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 7cc80c98 upstream. In some cases create_gpadl_header() allocates submessages but we never free them. [sumits] Note for stable: Upstream commit 4d637632: (Drivers: hv: get rid of redundant messagecount in create_gpadl_header()) changes the list usage to initialize list header in all cases; that patch isn't added to stable, so the current patch is modified a little bit from the upstream commit to check if the list is valid or not. Signed-off-by:
-
Germano Percossi authored
commit a0918f1c upstream. STATUS_BAD_NETWORK_NAME can be received during node failover, causing the flag to be set and making the reconnect thread always unsuccessful, thereafter. Once the only place where it is set is removed, the remaining bits are rendered moot. Removing it does not prevent "mount" from failing when a non existent share is passed. What happens when the share really ceases to exist while the share is mounted is undefined now as much as it was before. Signed-off-by:
Germano Percossi <germano.percossi@citrix.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Sachin Prabhu authored
commit 62a6cfdd upstream. commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect long after socket reconnect") added support for Negotiate requests to be initiated by echo calls. To avoid delays in calling echo after a reconnect, I added the patch introduced by the commit b8c60012 ("Call echo service immediately after socket reconnect"). This has however caused a regression with cifs shares which do not have support for echo calls to trigger Negotiate requests. On connections which need to call Negotiation, the echo calls trigger an error which triggers a reconnect which in turn triggers another echo call. This results in a loop which is only broken when an operation is performed on the cifs share. For an idle share, it can DOS a server. The patch uses the smb_operation can_echo() for cifs so that it is called only if connection has been already been setup. kernel bz: 194531 Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Tested-by:
Jonathan Liu <net147@gmail.com> Acked-by:
-
Steven Rostedt (VMware) authored
commit 78f7a45d upstream. I noticed that reading the snapshot file when it is empty no longer gives a status. It suppose to show the status of the snapshot buffer as well as how to allocate and use it. For example: ># cat snapshot # tracer: nop # # # * Snapshot is allocated * # # Snapshot commands: # echo 0 > snapshot : Clears and frees snapshot buffer # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated. # Takes a snapshot of the main buffer. # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free) # (Doesn't have to be '2' works with any number that # is not a '0' or '1') But instead it just showed an empty buffer: ># cat snapshot # tracer: nop # # entries-in-buffer/entries-written: 0/0 #P:4 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | What happened was that it was using the ring_buffer_iter_empty() function to see if it was empty, and if it was, it showed the status. But that function was returning false when it was empty. The reason was that the iter header page was on the reader page, and the reader page was empty, but so was the buffer itself. The check only tested to see if the iter was on the commit page, but the commit page was no longer pointing to the reader page, but as all pages were empty, the buffer is also. Fixes: 651e22f2 ("ring-buffer: Always reset iterator to reader page") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit df62db5b upstream. Currently the snapshot trigger enables the probe and then allocates the snapshot. If the probe triggers before the allocation, it could cause the snapshot to fail and turn tracing off. It's best to allocate the snapshot buffer first, and then enable the trigger. If something goes wrong in the enabling of the trigger, the snapshot buffer is still allocated, but it can also be freed by the user by writting zero into the snapshot buffer file. Also add a check of the return status of alloc_snapshot(). Fixes: 77fd5c15 ("tracing: Add snapshot trigger to function probes") Signed-off-by:
-
Eric Biggers authored
commit c9f838d1 upstream. This fixes CVE-2017-7472. Running the following program as an unprivileged user exhausts kernel memory by leaking thread keyrings: #include <keyutils.h> int main() { for (;;) keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING); } Fix it by only creating a new thread keyring if there wasn't one before. To make things more consistent, make install_thread_keyring_to_cred() and install_process_keyring_to_cred() both return 0 if the corresponding keyring is already present. Fixes: d84f4f99 ("CRED: Inaugurate COW credentials") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David Howells authored
commit c1644fe0 upstream. This fixes CVE-2017-6951. Userspace should not be able to do things with the "dead" key type as it doesn't have some of the helper functions set upon it that the kernel needs. Attempting to use it may cause the kernel to crash. Fix this by changing the name of the type to ".dead" so that it's rejected up front on userspace syscalls by key_get_type_from_user(). Though this doesn't seem to affect recent kernels, it does affect older ones, certainly those prior to: commit c06cfb08 Author: David Howells <dhowells@redhat.com> Date: Tue Sep 16 17:36:06 2014 +0100 KEYS: Remove key_type::match in favour of overriding default by match_preparse which went in before 3.18-rc1. Signed-off-by:
-
David Howells authored
commit ee8f844e upstream. This fixes CVE-2016-9604. Keyrings whose name begin with a '.' are special internal keyrings and so userspace isn't allowed to create keyrings by this name to prevent shadowing. However, the patch that added the guard didn't fix KEYCTL_JOIN_SESSION_KEYRING. Not only can that create dot-named keyrings, it can also subscribe to them as a session keyring if they grant SEARCH permission to the user. This, for example, allows a root process to set .builtin_trusted_keys as its session keyring, at which point it has full access because now the possessor permissions are added. This permits root to add extra public keys, thereby bypassing module verification. This also affects kexec and IMA. This can be tested by (as root): keyctl session .builtin_trusted_keys keyctl add user a a @s keyctl list @s which on my test box gives me: 2 keys in keyring: 180010936: ---lswrv 0 0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05 801382539: --alswrv 0 0 user: a Fix this by rejecting names beginning with a '.' in the keyctl. Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> cc: linux-ima-devel@lists.sourceforge.net Signed-off-by:
-
Mantas M authored
commit c2ed1880 upstream. The protocol field is checked when deleting IPv4 routes, but ignored for IPv6, which causes problems with routing daemons accidentally deleting externally set routes (observed by multiple bird6 users). This can be verified using `ip -6 route del <prefix> proto something`. Signed-off-by:
Mantas Mikulėnas <grawity@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit 2d6a0e9d upstream. Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit d4114914 upstream. Signed-off-by:
-
Ben Hutchings authored
commit 7926aff5 upstream. Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Ben Hutchings authored
commit 5593523f upstream. Allocating USB buffers on the stack is not portable, and no longer works on x86_64 (with VMAP_STACK enabled as per default). Fixes: 1da177e4 ("Linux-2.6.12-rc2") References: https://bugs.debian.org/852556Reported-by:
Lisandro Damián Nicanor Pérez Meyer <lisandro@debian.org> Tested-by:
-
Omar Sandoval authored
commit c4baad50 upstream. put_chars() stuffs the buffer it gets into an sg, but that buffer may be on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it manifested as printks getting turned into NUL bytes). Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Amit Shah <amit.shah@redhat.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Kees Cook authored
commit a4866aa8 upstream. Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is disallowed. However, on x86, the first 1MB was always allowed for BIOS and similar things, regardless of it actually being System RAM. It was possible for heap to end up getting allocated in low 1MB RAM, and then read by things like x86info or dd, which would trip hardened usercopy: usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes) This changes the x86 exception for the low 1MB by reading back zeros for System RAM areas instead of blindly allowing them. More work is needed to extend this to mmap, but currently mmap doesn't go through usercopy, so hardened usercopy won't Oops the kernel. Reported-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by:
Kees Cook <keescook@chromium.org> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Lee, Chun-Yi authored
commit f9ac89f5 upstream. The 98d610c3 patch was introduced since v4.11-rc1 that it causes that the accelerometer input device will not be created on workable machines because the HID string comparing logic is wrong. And, the patch doesn't prevent that the accelerometer input device be created on the machines that have no BST0001. That's because the acpi_get_devices() returns success even it didn't find any match device. This patch fixed the HID string comparing logic of BST0001 device. And, it also makes sure that the acpi_get_devices() returns acpi_handle for BST0001. Fixes: 98d610c3 ("acer-wmi: setup accelerometer when machine has appropriate notify event") Reference: https://bugzilla.kernel.org/show_bug.cgi?id=193761Reported-by:
Samuel Sieb <samuel-kbugs@sieb.net> Signed-off-by:
"Lee, Chun-Yi" <jlee@suse.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
- 03 May, 2017 4 commits
-
-
Chun-Yi Lee authored
commit 98d610c3 upstream. The accelerometer event relies on the ACERWMID_EVENT_GUID notify. So, this patch changes the codes to setup accelerometer input device when detected ACERWMID_EVENT_GUID. It avoids that the accel input device created on every Acer machines. In addition, patch adds a clearly parsing logic of accelerometer hid to acer_wmi_get_handle_cb callback function. It is positive matching the "SENR" name with "BST0001" device to avoid non-supported hardware. Reported-by:
Bjørn Mork <bjorn@mork.no> Cc: Darren Hart <dvhart@infradead.org> Signed-off-by:
-
Daeho Jeong authored
commit 05ac5aa1 upstream. We've fixed the race condition problem in calculating ext4 checksum value in commit b47820ed ("ext4: avoid modifying checksum fields directly during checksum veficationon"). However, by this change, when calculating the checksum value of inode whose i_extra_size is less than 4, we couldn't calculate the checksum value in a proper way. This problem was found and reported by Nix, Thank you. Reported-by:
Nix <nix@esperi.org.uk> Signed-off-by:
Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by:
Youngjin Gil <youngjin.gil@samsung.com> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Arnd Bergmann authored
commit 00514537 upstream. I ran into a stack frame size warning because of the on-stack copy of the USB device structure: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Copying a device structure like this is wrong for a number of other reasons too aside from the possible stack overflow. One of them is that the dev_info() call will print the name of the device later, but AFAICT we have only copied a pointer to the name earlier and the actual name has been freed by the time it gets printed. This removes the on-stack copy of the device and instead copies the device name using kstrdup(). I'm ignoring the possible failure here as both printk() and kfree() are able to deal with NULL pointers. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 7ed23e1b upstream. On Power8 & Power9 the early CPU inititialisation in __init_HFSCR() turns on HFSCR[TM] (Hypervisor Facility Status and Control Register [Transactional Memory]), but that doesn't take into account that TM might be disabled by CPU features, or disabled by the kernel being built with CONFIG_PPC_TRANSACTIONAL_MEM=n. So later in boot, when we have setup the CPU features, clear HSCR[TM] if the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account for the CONFIG_PPC_TRANSACTIONAL_MEM=n case. Without this a KVM guest might try use TM, even if told not to, and cause an oops in the host kernel. Typically the oops is seen in __kvmppc_vcore_entry() and may or may not be fatal to the host, but is always bad news. In practice all shipping CPU revisions do support TM, and all host kernels we are aware of build with TM support enabled, so no one should actually be able to hit this in the wild. Fixes: 2a3563b0 ("powerpc: Setup in HFSCR for POWER8") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by:
Sam Bobroff <sam.bobroff@au1.ibm.com> [mpe: Rewrite change log with input from Sam, add Fixes/stable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [sb: Backported to linux-4.4.y: adjusted context] Signed-off-by:
-
- 28 Apr, 2017 15 commits
-
-
Minchan Kim authored
commit d72e9a7a upstream. The copy_page is optimized memcpy for page-alinged address. If it is used with non-page aligned address, it can corrupt memory which means system corruption. With zram, it can happen with 1. 64K architecture 2. partial IO 3. slub debug Partial IO need to allocate a page and zram allocates it via kmalloc. With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned address. And finally, copy_page(mem, cmem) corrupts memory. So, this patch changes it to memcpy. Actuaully, we don't need to change zram_bvec_write part because zsmalloc returns page-aligned address in case of PAGE_SIZE class but it's not good to rely on the internal of zsmalloc. Note: When this patch is merged to stable, clear_page should be fixed, too. Unfortunately, recent zram removes it by "same page merge" feature so it's hard to backport this patch to -stable tree. I will handle it when I receive the mail from stable tree maintainer to merge this patch to backport. Fixes: 42e99bd9 ("zram: optimize memory operations with clear_page()/copy_page()") Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.orgSigned-off-by:
Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Max Bires authored
commit f2cfa58b upstream. Without a bool string present, using "# CONFIG_DEVPORT is not set" in defconfig files would not actually unset devport. This esnured that /dev/port was always on, but there are reasons a user may wish to disable it (smaller kernel, attack surface reduction) if it's not being used. Adding a message here in order to make this user visible. Signed-off-by:
Max Bires <jbires@google.com> Acked-by:
-
Geert Uytterhoeven authored
commit 309124e2 upstream. According to full-history-linux commit d3794f4fa7c3edc3 ("[PATCH] M68k update (part 25)"), port operations are allowed on m68k if CONFIG_ISA is defined. However, commit 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") accidentally changed an "||" into an "&&", disabling it completely on m68k. This logic was retained when introducing the DEVPORT symbol in commit 4f911d64 ("Make /dev/port conditional on config symbol"). Drop the bogus dependency on !M68K to fix this. Fixes: 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Al Stone <ahs3@redhat.com> Signed-off-by:
-
Juergen Gross authored
commit 9121b15b upstream. Connecting to the backend isn't working reliably in xen-fbfront: in case XenbusStateInitWait of the backend has been missed the backend transition to XenbusStateConnected will trigger the connected state only without doing the actions required when the backend has connected. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Martin K. Petersen authored
commit 7c856152 upstream. We previously made sure that the reported disk capacity was less than 0xffffffff blocks when the kernel was not compiled with large sector_t support (CONFIG_LBDAF). However, this check assumed that the capacity was reported in units of 512 bytes. Add a sanity check function to ensure that we only enable disks if the entire reported capacity can be expressed in terms of sector_t. Reported-by:
Steve Magnani <steve.magnani@digidescorp.com> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by:
Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin K. Petersen authored
commit a00a7862 upstream. Kefeng Wang discovered that old versions of the QEMU CD driver would return mangled mode data causing us to walk off the end of the buffer in an attempt to parse it. Sanity check the returned mode sense data. Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Tested-by:
-
Nicholas Bellinger authored
commit 1c99de98 upstream. Once upon a time back in 2009, a work-around was added to support the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login did not propose nor respond to MaxBurstLength, FirstBurstLength, DefaultTime2Wait and DefaultTime2Retain keys. The work-around in iscsi_check_proposer_for_optional_reply() allowed the missing keys to be proposed, but did not require waiting for a response before moving to full feature phase operation. This allowed GlobalSAN v3.3 to work out-of-the box, and for many years we didn't run into login interopt issues with any other initiators.. Until recently, when Martin tried a QLogic 57840S iSCSI Offload HBA on Windows 2016 which completed login, but subsequently failed with: Got unknown iSCSI OpCode: 0x43 The issue was QLogic MSFT side did not propose DefaultTime2Wait + DefaultTime2Retain, so LIO proposes them itself, and immediately transitions to full feature phase because of the GlobalSAN hack. However, the QLogic MSFT side still attempts to respond to DefaultTime2Retain + DefaultTime2Wait, even though LIO has set ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT in last login response. So while the QLogic MSFT side should have been proposing these two keys to start, it was doing the correct thing per RFC-3720 attempting to respond to proposed keys before transitioning to full feature phase. All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541) does correctly propose the four keys during login, making the original work-around moot. So in order to allow QLogic MSFT to run unmodified as-is, go ahead and drop this long standing work-around. Reported-by:
Martin Svec <martin.svec@zoner.cz> Cc: Martin Svec <martin.svec@zoner.cz> Cc: Himanshu Madhani <Himanshu.Madhani@cavium.com> Cc: Arun Easi <arun.easi@cavium.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit efb2ea77 upstream. This patch fixes a iscsi-target specific TMR reference leak during session shutdown, that could occur when a TMR was quiesced before the hand-off back to iscsi-target code via transport_cmd_check_stop_to_fabric(). The reference leak happens because iscsit_free_cmd() was incorrectly skipping the final target_put_sess_cmd() for TMRs when transport_generic_free_cmd() returned zero because the se_cmd->cmd_kref did not reach zero, due to the missing se_cmd assignment in original code. The result was iscsi_cmd and it's associated se_cmd memory would be freed once se_sess->sess_cmd_map where released, but the associated se_tmr_req was leaked and remained part of se_device->dev_tmr_list. This bug would manfiest itself as kernel paging request OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req attempted to dereference it's se_cmd pointer that had already been released during normal session shutdown. To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD and ISCSI_OP_SCSI_TMFUNC the same when there is an extra se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use op_scsi to signal __iscsit_free_cmd() when the former needs to clear any further iscsi related I/O state. Reported-by:
Rob Millner <rlm@daterainc.com> Cc: Rob Millner <rlm@daterainc.com> Reported-by:
Chu Yuan Lin <cyl@datera.io> Cc: Chu Yuan Lin <cyl@datera.io> Tested-by:
-
Thomas Gleixner authored
commit 6fdc6dd9 upstream. The vsyscall32 sysctl can racy against a concurrent fork when it switches from disabled to enabled: arch_setup_additional_pages() if (vdso32_enabled) --> No mapping sysctl.vsysscall32() --> vdso32_enabled = true create_elf_tables() ARCH_DLINFO_IA32 if (vdso32_enabled) { --> Add VDSO entry with NULL pointer Make ARCH_DLINFO_IA32 check whether the VDSO mapping has been set up for the newly forked process or not. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathias Krause <minipli@googlemail.com> Link: http://lkml.kernel.org/r/20170410151723.602367196@linutronix.deSigned-off-by:
-
Peter Zijlstra authored
commit f2200ac3 upstream. When the perf_branch_entry::{in_tx,abort,cycles} fields were added, intel_pmu_lbr_read_32() wasn't updated to initialize them. [js] there is no cycles in 3.12 yet Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 135c5612 ("perf/x86/intel: Support Haswell/v4 LBR format") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Cameron Gutman authored
commit 53763668 upstream. Signed-off-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
-
Jack Morgenstein authored
commit 291c566a upstream. In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5c ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
commit 6496bbf0 upstream. Single send WQE in RX buffer should be stamped with software ownership in order to prevent the flow of QP in error in FW once UPDATE_QP is called. Fixes: 9f519f68 ('mlx4_en: Not using Shared Receive Queues') Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Guenter Roeck authored
commit 22547c4c upstream. On a system with a defective USB device connected to an USB hub, an endless sequence of port connect events was observed. The sequence of events as observed is as follows: - Port reports connected event (port status=USB_PORT_STAT_CONNECTION). - Event handler debounces port and resets it by calling hub_port_reset(). - hub_port_reset() calls hub_port_wait_reset() to wait for the reset to complete. - The reset completes, but USB_PORT_STAT_CONNECTION is not immediately set in the port status register. - hub_port_wait_reset() returns -ENOTCONN. - Port initialization sequence is aborted. - A few milliseconds later, the port again reports a connected event, and the sequence repeats. This continues either forever or, randomly, stops if the connection is already re-established when the port status is read. It results in a high rate of udev events. This in turn destabilizes userspace since the above sequence holds the device mutex pretty much continuously and prevents userspace from actually reading the device status. To prevent the problem from happening, let's wait for the connection to be re-established after a port reset. If the device was actually disconnected, the code will still return an error, but it will do so only after the long reset timeout. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Andrey Konovalov authored
commit 2b6867c2 upstream. Subtracting tp_sizeof_priv from tp_block_size and casting to int to check whether one is less then the other doesn't always work (both of them are unsigned ints). Compare them as is instead. Also cast tp_sizeof_priv to u64 before using BLK_PLUS_PRIV, as it can overflow inside BLK_PLUS_PRIV otherwise. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
