Remove non-existent config option from defconfig.

I goofed in my last patch to this code..
It reported 1 less CPU than it should have. Doh.

into ppc970.osdl.org:/home/torvalds/v2.5/linux

From: Russell King <rmk@arm.linux.org.uk>

Export scaling_available_frequencies on the remaining
x86 freq_table-based cpufreq drivers. powernow-k7, acpi and speedstep-centrino
are already queued.
                                                                                                       
Please note that this cannot be done in the cpufreq core as the cpufreq core
tries very hard to be independent of the freq_table helpers. 

From: Kronos <kronos at kronoz.cjb.net>
 
The following patch make powernow-k7.c export supported frequencies via
sysfs. I'm trying to write a scaling deamon and I need to know them.

From: Herbert Xu <herbert@gondor.apana.org.au>

update_screen() requires the console semaphore.

net/wanrouter/wanmain.c:195: error: parse error before "static"

From: Sam Ravnborg <sam@ravnborg.org>

List all entries in arch/$(ARCH)/configs/*_defconfig when doing 'make
help'.

Results in output like this (ppc64 as example):

  g5_defconfig             - Build for g5
  pSeries_defconfig        - Build for pSeries

The implementation is generic and enables this for all users of _defconfig.

From: linux@MichaelGeng.de (Michael Geng)

Add new driver for Teletext decoder SAA5246A from Philips.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99
initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99
initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99
initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing GNU-style initializers to C99 initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99
initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99
initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99
initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99
initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing the GNU-style initializers to C99 initializers.

From: "Art Haas" <ahaas@airmail.net>

Here's a small patch changing a few GNU-style initializers to C99
initiailzers.

From: Dave Jones <davej@redhat.com>

Now that the syscalls.h stuff is in mainline, that clears the way for this
I guess?

From: "Art Haas" <ahaas@airmail.net>

This patch converts the file to use C99 initializers.  The file had this
patch applied before, but a subsequent patch reversed the change and
readded the GNU-style initializer.  This patch brings back the C99 one.

From: David Woodhouse <dwmw2@infradead.org>,
      Dave Jones <davej@redhat.com>

Add a missing unlock.

From: Jakub Bogusz <qboosh@pld-linux.org>

This patch removes using of floating point operations in tdfxfb - they
are really not needed here (these consts are used only in substitutions
and comparisons with integers) are cause unresolved symbols on some
archs - e.g. on alpha:

*** Warning: "__ltdf2" [drivers/video/tdfxfb.ko] undefined!
*** Warning: "__adddf3" [drivers/video/tdfxfb.ko] undefined!
*** Warning: "__floatsidf" [drivers/video/tdfxfb.ko] undefined!

From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>

The callout code has been removed long ago from 2.6.  I believe it is safe
to remove some of its unused defines.

From: Herbert Xu <herbert@gondor.apana.org.au>

RADEON is selecting I2C_ALGOBIT but as kconfig currently does not propagate
selects up the dependency chain (that is according to Roman), this can
leave I2C as m while I2C_ALGOBIT is y.

early printk documentation fix

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Don't remove attributes, they should be gone automatically.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Refactor fw_setup_class_device for readability and maintainability.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

- Remove races related to the handling and release of 'struct firmware'

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- release 'struct firmware_priv' from class_dev->release.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Make an status bitmap instead of using independent boolean variables.  It
  will make things nicer later when new issues need to be tracked.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- Take advantage of strlcpy.

- Extra error logging.

- Use struct coping instead of memcpy.

- Put all aborting code in a single place, and fully abort if
  fw_realloc_buffer fails.

- Abort on unexpected 'loading' values.

From: Manuel Estrada Sainz <ranty@ranty.pantax.net>

Based on patch and suggestions from Dmitry Torokhov

- use vfree to free vmalloc memory.

- Make sure fw_setup_class_device sets *class_dev_p to NULL in all case of
  error.

- Fix error handling in firmware_class_init.

From: Geert Uytterhoeven <geert@linux-m68k.org>

Update Macintosh driver config logic:
  - Move remaining Mac/m68k-specific logic from arch/m68k/Kconfig to
    drivers/macintosh/Kconfig
  - Fixup Mac/m68k conflicts

From: James Simmons <jsimmons@infradead.org>

Remove kd.h.  We don't need this header.  Use the inline functions to set
the current process state.

From: Michael Hunold <hunold@linuxtv.org>

- dvb-ttusb-budget: Fixed i2c code to detect nearly all errors

- dvb-ttusb-budget: Added "V 2.1" to prevent warning message on driver load

- dvb-ttusb-budget: Some printks turned into dprintks

- dvb-ttusb-budget: Removed __initdata.  It is now possible in kernel 2.6
  to compile the DVB drivers into a monolithic kernel.

- dvb-ttusb-budget: Fix for failing urb submission under 2.6 kernels

From: Michael Hunold <hunold@linuxtv.org>

- av7110: check result of saa7146_wait_for_debi_done() in av7110_bootarm()
  and bail out early if booting the ARM failed

- av7110: correct voffset for analog standard

- av7110: replace usage of sleep_on_interruptible_timeout() with
  wait_event_interruptible_timeout()

From: Michael Hunold <hunold@linuxtv.org>

- tda1004x: standardised where the firmware should be.

- tda1004x: need to re-invert inversion for tda10046 in get_fe()

- tda1004x: reset chip before uploading firmware

- tda1004x: split firmware upload off from frontend init.  the initial tune
  attempt was taking too long.  provide explanation of tuner frequency
  calculations

- tda1004x: Fixed signal strength reading for tda10046h

From: Michael Hunold <hunold@linuxtv.org>

stv0299: Added seperate settings for SU1278 on Technotrend hardware