- 03 Apr, 2017 16 commits
-
-
lipeng authored
This patch fixes below ethtool configuration error: localhost:~ # ethtool -X eth0 hkey XX:XX:XX... Cannot set Rx flow hash configuration: Operation not supported Signed-off-by:
lipeng <lipeng321@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
lipeng authored
netif_tx_lock is a global spin lock, it will take affect in all rings in the netdevice. In tx_poll_one process, it can only lock the current ring, in this case, we define a spin lock in hnae_ring struct for it. Signed-off-by:
-
lipeng authored
Because buf_size of ring set to 2048, the process of rx_poll_one can reuse the page, therefore the performance of XGE can improve. But the chip only supports three bds in one package, so the max mtu is 6K when it sets to 2048. For better performane in litter mtu, we need change buf_size according to mtu. When user change mtu, hns is only change the desc in memory. There are some desc has been fetched by the chip, these desc can not be changed by the code. So it needs set the port loopback and send some packages to let the chip consumes the wrong desc and fetch new desc. Because the Pv660 do not support rss indirection, we need add version check in mtu change process. Signed-off-by:
-
lipeng authored
After polling less than buget packages, we need check again. If there are still some packages, we call napi_schedule add softirq queue, this is not better way. So we return buget value instead of napi_schedule. Signed-off-by:
-
Daode Huang authored
When run ethtool ethX on hns driver, the speed will show as "Unknown". The base.speed is not correct assigned, this patch fix this bug. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Reviewed-by:
-
lipeng authored
Because all members of desc_cb is assigned when xmit one package, so it can delete in hnae_free_buffer, as follows: - "dma, priv, length, type" are assigned in fill_v2_desc. - "page_offset, reuse_flag, buf" are not used in tx direction. Signed-off-by:Weiwei Deng <dengweiwei@huawei.com> Reviewed-by:
-
lipeng authored
This patch optimises the init configuration code leg for gmac pad and crc set interface. Signed-off-by:
JinchuanTian <tianjinchuan1@huawei.com> Reviewed-by:
-
lipeng authored
This patch reduces GMAC TX threshold value to avoid gmac hang-up with speed 100M/duplex half. Signed-off-by:
-
lipeng authored
This patch fixes the implementation of the IRQ affinity function. This function is used to create the cpu mask which eventually is used to initialize the cpu<->queue association for XPS(Transmit Packet Steering). Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
-
David S. Miller authored
Sowmini Varadhan says: ==================== rds: tcp: couple of minor bug fixes A couple of minor bugfixes that showed up during testing ==================== Signed-off-by: -
Sowmini Varadhan authored
The rds_connect_worker() has a bug in the check that enforces the canonical connection order described in the comments of rds_tcp_state_change(). The intention is to make sure that all the multipath connections are always initiated by the smaller IP address via rds_start_mprds. To achieve this, rds_connection_worker should check that cp_index > 0. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
rds: tcp: allow progress of rds_conn_shutdown if the rds_connection is marked ERROR by an intervening FIN rds_conn_shutdown() runs in workq context, and marks the rds_connection as DISCONNECTING before quiescing Tx/Rx paths. However, after all I/O has quiesced, we may still find the rds_connection state to be RDS_CONN_ERROR if an intervening FIN was processed in softirq context. This is not a fatal error: rds_conn_shutdown() should continue the shutdown, and there is no need to log noisy messages about this event. Signed-off-by:
-
Eric Dumazet authored
It seems the code does not match the intent. This broke packetdrill, and probably other programs. Fixes: 6c7c98ba ("sock: avoid dirtying sk_stamp, if possible") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Andrew Morton authored
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c: In function 'mlx5e_set_rxfh': drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1067: warning: (near initialization for 'rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1068: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: excess elements in struct initializer drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:1069: warning: (near initialization for 'rrp') gcc-4.4.4 has issues with anonymous union initializers. Work around this. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2210: error: unknown field 'rqn' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2211: warning: (near initialization for 'direct_rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_channels': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: (near initialization for 'rrp.<anonymous>') drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2227: warning: initialization makes integer from pointer without a cast drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2228: error: unknown field 'rss' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: excess elements in struct initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2229: warning: (near initialization for 'rrp') drivers/net/ethernet/mellanox/mlx5/core/en_main.c: In function 'mlx5e_redirect_rqts_to_drop': drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2238: error: unknown field 'rqn' specified in initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: missing braces around initializer drivers/net/ethernet/mellanox/mlx5/core/en_main.c:2239: warning: (near initialization for 'drop_rrp.<anonymous>') gcc-4.4.4 has issues with anonymous union initializers. Work around this. Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Joao Pinto authored
Sending again, because forgot to include net-dev. The QoS IP does not accept AVB capabilities to default/queue 0, this way we guarantee 75% bandwidth for AVB. This patch assures that only queues >= 1 gets CBS confgured. Additional info was also added to stmmac.txt. Reported-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Signed-off-by:
-
- 02 Apr, 2017 13 commits
-
-
David S. Miller authored
David Ahern says: ==================== net: mpls: Allow users to configure more labels per route Increase the maximum number of new labels for MPLS routes from 2 to 30. To keep memory consumption in check, the labels array is moved to the end of mpls_nh and mpls_iptunnel_encap structs as a 0-sized array. Allocations use the maximum number of labels across all nexthops in a route for LSR and the number of labels configured for LWT. The mpls_route layout is changed to: +----------------------+ | mpls_route | +----------------------+ | mpls_nh 0 | +----------------------+ | alignment padding | 4 bytes for odd number of labels; 0 for even +----------------------+ | via[rt_max_alen] 0 | +----------------------+ | alignment padding | via's aligned on sizeof(unsigned long) +----------------------+ | ... | Meaning the via follows its mpls_nh providing better locality as the number of labels increases. UDP_RR tests with namespaces shows no impact to a modest performance increase with this layout for 1 or 2 labels and 1 or 2 nexthops. mpls_route allocation size is limited to 4096 bytes allowing on the order of 30 nexthops with 30 labels (or more nexthops with fewer labels). LWT encap shares same maximum number of labels as mpls routing. v3 - initialize n_labels to 0 in case RTA_NEWDST is not defined; detected by the kbuild test robot v2 - updates per Eric's comments + added patch to ensure all reads of rt_nhn_alive and nh_flags in the packet path use READ_ONCE and all writes via event handlers use WRITE_ONCE + limit mpls_route size to 4096 (PAGE_SIZE for most arch) + mostly killed use of MAX_NEW_LABELS; it exists only for common limit between lwt and routing paths ==================== Signed-off-by: -
David Ahern authored
Alow users to push down more labels per MPLS encap. Similar to LSR case, move label array to the end of mpls_iptunnel_encap and allocate based on the number of labels for the route. For consistency with the LSR case, re-use the same maximum number of labels. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
Allow users to push down more labels per MPLS route. With the previous patches, no memory allocations are based on MAX_NEW_LABELS; the limit is only used to keep userspace in check. At this point MAX_NEW_LABELS is only used for mpls_route_config (copying route data from userspace) and processing nexthops looking for the max number of labels across the route spec. Signed-off-by:
-
David Ahern authored
Limit memory allocation size for mpls_route to 4096. Signed-off-by:
-
David Ahern authored
Move labels to the end of mpls_nh as a 0-sized array and within mpls_route move the via for a nexthop after the mpls_nh. The new layout becomes: +----------------------+ | mpls_route | +----------------------+ | mpls_nh 0 | +----------------------+ | alignment padding | 4 bytes for odd number of labels; 0 for even +----------------------+ | via[rt_max_alen] 0 | +----------------------+ | alignment padding | via's aligned on sizeof(unsigned long) +----------------------+ | ... | +----------------------+ | mpls_nh n-1 | +----------------------+ | via[rt_max_alen] n-1 | +----------------------+ Memory allocated for nexthop + via is constant across all nexthops and their via. It is based on the maximum number of labels across all nexthops and the maximum via length. The size is saved in the mpls_route as rt_nh_size. Accessing a nexthop becomes rt->rt_nh + index * rt->rt_nh_size. The offset of the via address from a nexthop is saved as rt_via_offset so that given an mpls_nh pointer the via for that hop is simply nh + rt->rt_via_offset. With prior code, memory allocated per mpls_route with 1 nexthop: via is an ethernet address - 64 bytes via is an ipv4 address - 64 via is an ipv6 address - 72 With this patch set, memory allocated per mpls_route with 1 nexthop and 1 or 2 labels: via is an ethernet address - 56 bytes via is an ipv4 address - 56 via is an ipv6 address - 64 The 8-byte reduction is due to the previous patch; the change introduced by this patch has no impact on the size of allocations for 1 or 2 labels. Performance impact of this change was examined using network namespaces with veth pairs connecting namespaces. ns0 inserts the packet to the label-switched path using an lwt route with encap mpls. ns1 adds 1 or 2 labels depending on test, ns2 (and ns3 for 2-label test) pops the label and forwards. ns3 (or ns4) for a 2-label is the destination. Similar series of namespaces used for 2-nexthop test. Intent is to measure changes to latency (overhead in manipulating the packet) in the forwarding path. Tests used netperf with UDP_RR. IPv4: current patches 1 label, 1 nexthop 29908 30115 2 label, 1 nexthop 29071 29612 1 label, 2 nexthop 29582 29776 2 label, 2 nexthop 29086 29149 IPv6: current patches 1 label, 1 nexthop 24502 24960 2 label, 1 nexthop 24041 24407 1 label, 2 nexthop 23795 23899 2 label, 2 nexthop 23074 22959 In short, the change has no effect to a modest increase in performance. This is expected since this patch does not really have an impact on routes with 1 or 2 labels (the current limit) and 1 or 2 nexthops. Signed-off-by: -
David Ahern authored
Number of nexthops and number of alive nexthops are tracked using an unsigned int. A route should never have more than 255 nexthops so convert both to u8. Update all references and intermediate variables to consistently use u8 as well. Shrinks the size of mpls_route from 32 bytes to 24 bytes with a 2-byte hole before the nexthops. Signed-off-by:
-
David Ahern authored
The number of alive nexthops for a route (rt->rt_nhn_alive) and the flags for a next hop (nh->nh_flags) are modified by netdev event handlers. The event handlers run with rtnl_lock held so updates are always done with the lock held. The packet path accesses the fields under the rcu lock. Since those fields can change at any moment in the packet path, both fields should be accessed using READ_ONCE. Updates to both fields should use WRITE_ONCE. Update mpls_select_multipath (packet path) and mpls_ifdown and mpls_ifup (event handlers) accordingly. Signed-off-by:
-
Paolo Abeni authored
In the udp_sock struct, the 'forward_deficit' and 'pcflag' fields share the same cacheline. While the first is dirtied by udp_recvmsg, the latter is read, possibly several times, by the bottom half processing to discriminate between udp and udplite sockets. With this patch, sk->sk_protocol is used to check is the socket is really an udplite one, avoiding some cache misses per packet and improving the performance under udp_flood with small packet up to 10%. Signed-off-by:
-
Tobias Regnery authored
After commit 96567d5d ("net: dsa: dsa2: Add basic support of devlink") I see the following link error with CONFIG_NET_DSA=y and CONFIG_NET_DEVLINK=m: net/built-in.o: In function 'dsa_register_switch': (.text+0xe226b): undefined reference to `devlink_alloc' net/built-in.o: In function 'dsa_register_switch': (.text+0xe2284): undefined reference to `devlink_register' net/built-in.o: In function 'dsa_register_switch': (.text+0xe243e): undefined reference to `devlink_port_register' net/built-in.o: In function 'dsa_register_switch': (.text+0xe24e1): undefined reference to `devlink_port_register' net/built-in.o: In function 'dsa_register_switch': (.text+0xe24fa): undefined reference to `devlink_port_type_eth_set' net/built-in.o: In function 'dsa_dst_unapply.part.8': dsa2.c:(.text.unlikely+0x345): undefined reference to 'devlink_port_unregister' dsa2.c:(.text.unlikely+0x36c): undefined reference to 'devlink_port_unregister' dsa2.c:(.text.unlikely+0x38e): undefined reference to 'devlink_port_unregister' dsa2.c:(.text.unlikely+0x3f2): undefined reference to 'devlink_unregister' dsa2.c:(.text.unlikely+0x3fb): undefined reference to 'devlink_free' Fix this by adding a dependency on MAY_USE_DEVLINK so that CONFIG_NET_DSA get switched to be build as module when CONFIG_NET_DEVLINK=m. Fixes: 96567d5d ("net: dsa: dsa2: Add basic support of devlink") Signed-off-by:
Tobias Regnery <tobias.regnery@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Russell King says: ==================== phylib EEE updates This series of patches depends on the previous set of changes, and is therefore net-next material. While testing the EEE code, I discovered a number of issues: 1. It is possible to enable advertisment of EEE modes which are not supported by the hardware. We omit to check the supported modes and mask off those modes that are not supported before writing the EEE advertisment register. 2. We need to restart autonegotiation after a change of the EEE advertisment, otherwise the link partner does not see the updated EEE modes. 3. SGMII connected PHYs are also capable of supporting EEE. Through discussion with Florian, it has been decided to remove the check for the PHY interface mode in patch (3). ==================== Signed-off-by: -
Russell King authored
EEE is able to work in any PHY interface mode, there is nothing which fundamentally restricts it to only a few modes. For example, EEE works in SGMII mode with the Marvell 88E1512. Rather than just adding SGMII mode to the list, Florian suggests removing the list of interface modes entirely: It actually sounds like we should just kill the check entirely, it does not appear that any of the interface mode would not fundamentally be able to support EEE, because the "lowest" mode we support is MII, and even there it's quite possible to support EEE. Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Russell King authored
When the EEE advertisment is changed, we should restart autonegotiation to update the link partner with the new EEE settings. Add this trigger but only if the advertisment has changed. Reviewed-by:
-
Russell King authored
We currently allow userspace to set any EEE advertisments it desires, whether or not the PHY supports them. For example: # ethtool --set-eee eth1 advertise 0xffffffff # ethtool --show-eee eth1 EEE Settings for eth1: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full 1000baseKX/Full 10000baseT/Full 10000baseKX4/Full 10000baseKR/Full Clearly, this is not sane, we should only allow link modes that are supported to be advertised (as we do elsewhere.) Ensure that we mask the MDIO_AN_EEE_ADV value with the capabilities retrieved from the MDIO_PCS_EEE_ABLE register. Reviewed-by:
-
- 01 Apr, 2017 11 commits
-
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpf: program testing framework Development and testing of networking bpf programs is quite cumbersome. Especially tricky are XDP programs that attach to real netdevices and program development feels like working on the car engine while the car is in motion. Another problem is ongoing changes to upstream llvm core that can introduce an optimization that verifier will not recognize. llvm bpf backend tests have no ability to run the programs. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. It achieves several goals: - development of xdp and skb based bpf programs can be done in a canned environment with unit tests - program performance optimizations can be benchmarked outside of networking core (without driver and skb costs) - continuous testing of upstream changes is finally practical Patches 4,5,6 add C based test cases of various complexity to cover some sched_cls and xdp features. More tests will be added in the future. The tests were run on centos7 only. For now the framework supports only skb and xdp programs. In the future it can be extended to socket_filter and tracing program types. More details are in individual patches. v1->v2: - rename bpf_program_test_run->bpf_prog_test_run - add missing #include <linux/bpf.h> since libbpf.h shouldn't depend on prior includes - reordered patches 3 and 4 to keep bisect clean ==================== Signed-off-by: -
Alexei Starovoitov authored
this l4lb demo is a comprehensive test case for LLVM codegen and kernel verifier. It's using fully inlined jhash(), complex packet parsing and multiple map lookups of different types to stress llvm and verifier. The map sizes, map population and test vectors are artificial to exercise different paths through the bpf program. Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Alexei Starovoitov authored
add C test for xdp_adjust_head(), packet rewrite and map lookups Signed-off-by:
-
Alexei Starovoitov authored
add simple C test case for llvm and verifier range check fix from commit b1977682 ("bpf: improve verifier packet range checks") Signed-off-by:
-
Alexei Starovoitov authored
expose bpf_program__set_type() to set program type Signed-off-by:
-
Alexei Starovoitov authored
add support for BPF_PROG_TEST_RUN command to libbpf.a Signed-off-by:
Wang Nan <wangnan0@huawei.com> Signed-off-by:
-
Alexei Starovoitov authored
development and testing of networking bpf programs is quite cumbersome. Despite availability of user space bpf interpreters the kernel is the ultimate authority and execution environment. Current test frameworks for TC include creation of netns, veth, qdiscs and use of various packet generators just to test functionality of a bpf program. XDP testing is even more complicated, since qemu needs to be started with gro/gso disabled and precise queue configuration, transferring of xdp program from host into guest, attaching to virtio/eth0 and generating traffic from the host while capturing the results from the guest. Moreover analyzing performance bottlenecks in XDP program is impossible in virtio environment, since cost of running the program is tiny comparing to the overhead of virtio packet processing, so performance testing can only be done on physical nic with another server generating traffic. Furthermore ongoing changes to user space control plane of production applications cannot be run on the test servers leaving bpf programs stubbed out for testing. Last but not least, the upstream llvm changes are validated by the bpf backend testsuite which has no ability to test the code generated. To improve this situation introduce BPF_PROG_TEST_RUN command to test and performance benchmark bpf programs. Joint work with Daniel Borkmann. Signed-off-by:
-
Florian Fainelli authored
This patch adds support for a DSA mock-up driver which essentially does the following: - registers/unregisters 4 fixed PHYs to the slave network devices - uses eth0 (configurable) as the master netdev - registers the switch as a fixed MDIO device against the fixed MDIO bus at address 31 - includes dynamic debug prints for dsa_switch_ops functions that can be enabled to get call traces This is a good way to test modular builds as well as exercise the DSA APIs without requiring access to real hardware. This does not test the data-path, although this could be added later on. Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: program cross-chip bridging The purpose of this patch series is to bring hardware cross-chip bridging configuration to the DSA layer and the mv88e6xxx DSA driver. Most recent Marvell switch chips have a Cross-chip Port Based VLAN Table (PVT) used to restrict to which internal destination port an arbitrary external source port is allowed to egress frames to. The current behavior of the mv88e6xxx driver is to program this table table with all ones, allowing any external ports to egress frames on any internal ports. This means that carefully crafted Ethernet frames can potentially bypass the user bridging configuration. Patches 1 to 7 prepare the setup of this table and factorize the common bits of both in-chip and cross-chip Marvell bridging code. Patch 8 adds new optional cross-chip bridging operations to DSA switch. Patch 9 switches the current behavior to program the table according to the user bridging configuration when (cross-chip) ports get (un)bridged. On a ZII Rev B board, bridging together the 3 user ports of both 88E6352 will result in the following PVTs on respectively switch 0 and switch 1: External Internal Ports Dev Port 0 1 2 3 4 5 6 1 0 * * * - - * * 1 1 * * * - - * * 1 2 * * * - - * * 1 3 - - - - - * * 1 4 - - - - - * * 1 5 * * * * * * * 1 6 * * * * * * * 0 0 * * * - - * * 0 1 * * * - - * * 0 2 * * * - - * * 0 3 - - - - - * * 0 4 - - - - - * * 0 5 * * * * * * * 0 6 * * * * * * * Changes since v2: - Define MV88E6XXX_MAX_PVT_SWITCHES and MV88E6XXX_MAX_PVT_PORTS - use mv88e6xxx_g2_misc_4_bit_port instead of the 5-bit variant - add Andrew's tags and reword commit 6/9 ==================== Signed-off-by: -
Vivien Didelot authored
Implement the DSA cross-chip bridging operations by remapping the local ports an external source port can egress frames to, when this cross-chip port joins or leaves a bridge. The PVT is no longer configured with all ones allowing any external frame to egress any local port. Only DSA and CPU ports, as well as bridge group members, can egress frames on local ports. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
Introduce crosschip_bridge_{join,leave} operations in the dsa_switch_ops structure, which can be used by switches supporting interconnection. Signed-off-by:
-
