- 11 Jan, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei Starovoitov. 2) Revert dev_get_random_name() changes as adjust the error code returns seen by userspace definitely breaks stuff. 3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel Grumbach. 4) From wrong AF family when requesting sock diag modules, from Andrii Vladyka. 5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang. 6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner. 7) Don't leak when removing VLAN ID 0, from Cong Wang. 8) Hey there's a potential leak in ipv6_make_skb() too, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: sr: fix TLVs not being copied using setsockopt ipv6: fix possible mem leaks in ipv6_make_skb() mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable mlxsw: pci: Wait after reset before accessing HW nfp: always unmask aux interrupts at init 8021q: fix a memory leak for VLAN 0 device of_mdio: avoid MDIO bus removal when a PHY is missing caif_usb: use strlcpy() instead of strncpy() doc: clarification about setting SO_ZEROCOPY net: gianfar_ptp: move set_fipers() to spinlock protecting area sctp: make use of pre-calculated len sctp: add a ceiling to optlen in some sockopts sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events bpf: introduce BPF_JIT_ALWAYS_ON config bpf: avoid false sharing of map refcount with max_entries ipv6: remove null_entry before adding default route SolutionEngine771x: add Ether TSU resource SolutionEngine771x: fix Ether platform data docs-rst: networking: wire up msg_zerocopy net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg() ...
-
- 10 Jan, 2018 18 commits
-
-
Mathieu Xhonneux authored
Function ipv6_push_rthdr4 allows to add an IPv6 Segment Routing Header to a socket through setsockopt, but the current implementation doesn't copy possible TLVs at the end of the SRH received from userspace. Therefore, the execution of the following branch if (sr_has_hmac(sr_phdr)) { ... } will never complete since the len and type fields of a possible HMAC TLV are not copied, hence seg6_get_tlv_hmac will return an error, and the HMAC will not be computed. This commit adds a memcpy in case TLVs have been appended to the SRH. Fixes: a149e7c7 ("ipv6: sr: add support for SRH injection through setsockopt") Acked-by: David Lebrun <dlebrun@google.com> Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
ip6_setup_cork() might return an error, while memory allocations have been done and must be rolled back. Fixes: 6422398c ("ipv6: introduce ipv6_make_skb") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Reported-by: Mike Maloney <maloney@google.com> Acked-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of small fixes for mlxsw driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Resolve the sparse warning: "sparse: Variable length array is used." Use 2 arrays for 2 PRM register accesses. Fixes: 96f17e07 ("mlxsw: spectrum: Support RED qdisc offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44b ("mlxsw: pci: Implement reset done check") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c352362 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
A vlan device with vid 0 is allow to creat by not able to be fully cleaned up by unregister_vlan_dev() which checks for vlan_id!=0. Also, VLAN 0 is probably not a valid number and it is kinda "reserved" for HW accelerating devices, but it is probably too late to reject it from creation even if makes sense. Instead, just remove the check in unregister_vlan_dev(). Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: ad1afb00 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2018-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.15 Hopefully the last set of fixes for 4.15. iwlwifi * fix DMA mapping regression since v4.14 wcn36xx * fix dynamic power save which has been broken since the driver was commited ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Madalin Bucur authored
If one of the child devices is missing the of_mdiobus_register_phy() call will return -ENODEV. When a missing device is encountered the registration of the remaining PHYs is stopped and the MDIO bus will fail to register. Propagate all errors except ENODEV to avoid it. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiongfeng Wang authored
gcc-8 reports net/caif/caif_usb.c: In function 'cfusbl_device_notify': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] The compiler require that the input param 'len' of strncpy() should be greater than the length of the src string, so that '\0' is copied as well. We can just use strlcpy() to avoid this warning. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kornilios Kourtis authored
Signed-off-by: Kornilios Kourtis <kou@zurich.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yangbo Lu authored
set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== sctp: Some sockopt optlen fixes Hangbin Liu reported that some SCTP sockopt are allowing the user to get the kernel to allocate really large buffers by not having a ceiling on optlen. This patchset address this issue (in patch 2), replace an GFP_ATOMIC that isn't needed and avoid calculating the option size multiple times in some setsockopt. ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
Hangbin Liu reported that some sockopt calls could cause the kernel to log a warning on memory allocation failure if the user supplied a large optlen value. That is because some of them called memdup_user() without a ceiling on optlen, allowing it to try to allocate really large buffers. This patch adds a ceiling by limiting optlen to the maximum allowed that would still make sense for these sockopt. Reported-by: Hangbin Liu <haliu@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcelo Ricardo Leitner authored
So replace it with GFP_USER and also add __GFP_NOWARN. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of the last-minute small PCM fixes: - A workaround for the recent regression wrt PulseAudio - Removal of spurious WARN_ON() that is triggered by syzkaller - Fixes for aloop, hardening racy accesses - Fixes in PCM OSS emulation wrt the unabortable loops that may cause RCU stall" * tag 'sound-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Allow aborting mutex lock at OSS read/write loops ALSA: pcm: Abort properly at pending signal in OSS read/write loops ALSA: aloop: Fix racy hw constraints adjustment ALSA: aloop: Fix inconsistent format due to incomplete rule ALSA: aloop: Release cable upon open error path ALSA: pcm: Workaround for weird PulseAudio behavior on rewind error ALSA: pcm: Add missing error checks in OSS emulation plugin builder ALSA: pcm: Remove incorrect snd_BUG_ON() usages
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Prevent out-of-bounds speculation in BPF maps by masking the index after bounds checks in order to fix spectre v1, and add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for removing the BPF interpreter from the kernel in favor of JIT-only mode to make spectre v2 harder, from Alexei. 2) Remove false sharing of map refcount with max_entries which was used in spectre v1, from Daniel. 3) Add a missing NULL psock check in sockmap in order to fix a race, from John. 4) Fix test_align BPF selftest case since a recent change in verifier rejects the bit-wise arithmetic on pointers earlier but test_align update was missing, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Jan, 2018 15 commits
-
-
Linus Torvalds authored
Merge tag 'riscv-for-linus-4.15-rc8_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux Pull RISC-V updates from Palmer Dabbelt: "This contains what I hope are the last RISC-V changes to go into 4.15. I know it's a bit last minute, but I think they're all fairly small changes: - SR_* constants have been renamed to match the latest ISA specification. - Some CONFIG_MMU #ifdef cruft has been removed. We've never supported !CONFIG_MMU. - __NR_riscv_flush_icache is now visible to userspace. We were hoping to avoid making this public in order to force userspace to call the vDSO entry, but it looks like QEMU's user-mode emulation doesn't want to emulate a vDSO. In order to allow glibc to fall back to a system call when the vDSO entry doesn't exist we're just - Our defconfig is no long empty. This is another one that just slipped through the cracks. The defconfig isn't perfect, but it's at least close to what users will want for the first RISC-V development board. Getting closer is kind of splitting hairs here: none of the RISC-V specific drivers are in yet, so it's not like things will boot out of the box. The only one that's strictly necessary is the __NR_riscv_flush_icache change, as I want that to be part of the public API starting from our first kernel so nobody has to worry about it. The others are nice to haves, but they seem sane for 4.15 to me" * tag 'riscv-for-linus-4.15-rc8_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux: riscv: rename SR_* constants to match the spec riscv: remove CONFIG_MMU ifdefs RISC-V: Make __NR_riscv_flush_icache visible to userspace RISC-V: Add a basic defconfig
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes for 4.15. - Maciej Rozycki found another series of FP issues which requires a seven part series to restructure and fix. - James fixes a warning about .set mt which gas doesn't like when building for R1 processors" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA MIPS: Consistently handle buffer counter with PTRACE_SETREGSET MIPS: Guard against any partial write attempt with PTRACE_SETREGSET MIPS: Factor out NT_PRFPREG regset access helpers MIPS: CPS: Fix r1 .set mt assembler warning
-
Alexei Starovoitov authored
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A set of fixes that should go into this release. This contains: - An NVMe pull request from Christoph, with a few critical fixes for NVMe. - A block drain queue fix from Ming. - The concurrent lo_open/release fix for loop" * 'for-linus' of git://git.kernel.dk/linux-block: loop: fix concurrent lo_open/lo_release block: drain queue before waiting for q_usage_counter becoming zero nvme-fcloop: avoid possible uninitialized variable warning nvme-mpath: fix last path removal during traffic nvme-rdma: fix concurrent reset and reconnect nvme: fix sector units when going between formats nvme-pci: move use_sgl initialization to nvme_init_iod()
-
Daniel Borkmann authored
In addition to commit b2157399 ("bpf: prevent out-of-bounds speculation") also change the layout of struct bpf_map such that false sharing of fast-path members like max_entries is avoided when the maps reference counter is altered. Therefore enforce them to be placed into separate cachelines. pahole dump after change: struct bpf_map { const struct bpf_map_ops * ops; /* 0 8 */ struct bpf_map * inner_map_meta; /* 8 8 */ void * security; /* 16 8 */ enum bpf_map_type map_type; /* 24 4 */ u32 key_size; /* 28 4 */ u32 value_size; /* 32 4 */ u32 max_entries; /* 36 4 */ u32 map_flags; /* 40 4 */ u32 pages; /* 44 4 */ u32 id; /* 48 4 */ int numa_node; /* 52 4 */ bool unpriv_array; /* 56 1 */ /* XXX 7 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct user_struct * user; /* 64 8 */ atomic_t refcnt; /* 72 4 */ atomic_t usercnt; /* 76 4 */ struct work_struct work; /* 80 32 */ char name[16]; /* 112 16 */ /* --- cacheline 2 boundary (128 bytes) --- */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 121, holes: 1, sum holes: 7 */ }; Now all entries in the first cacheline are read only throughout the life time of the map, set up once during map creation. Overall struct size and number of cachelines doesn't change from the reordering. struct bpf_map is usually first member and embedded in map structs in specific map implementations, so also avoid those members to sit at the end where it could potentially share the cacheline with first map values e.g. in the array since remote CPUs could trigger map updates just as well for those (easily dirtying members like max_entries intentionally as well) while having subsequent values in cache. Quoting from Google's Project Zero blog [1]: Additionally, at least on the Intel machine on which this was tested, bouncing modified cache lines between cores is slow, apparently because the MESI protocol is used for cache coherence [8]. Changing the reference counter of an eBPF array on one physical CPU core causes the cache line containing the reference counter to be bounced over to that CPU core, making reads of the reference counter on all other CPU cores slow until the changed reference counter has been written back to memory. Because the length and the reference counter of an eBPF array are stored in the same cache line, this also means that changing the reference counter on one physical CPU core causes reads of the eBPF array's length to be slow on other physical CPU cores (intentional false sharing). While this doesn't 'control' the out-of-bounds speculation through masking the index as in commit b2157399, triggering a manipulation of the map's reference counter is really trivial, so lets not allow to easily affect max_entries from it. Splitting to separate cachelines also generally makes sense from a performance perspective anyway in that fast-path won't have a cache miss if the map gets pinned, reused in other progs, etc out of control path, thus also avoids unintentional false sharing. [1] https://googleprojectzero.blogspot.ch/2018/01/reading-privileged-memory-with-side.htmlSigned-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-
Wei Wang authored
In the current code, when creating a new fib6 table, tb6_root.leaf gets initialized to net->ipv6.ip6_null_entry. If a default route is being added with rt->rt6i_metric = 0xffffffff, fib6_add() will add this route after net->ipv6.ip6_null_entry. As null_entry is shared, it could cause problem. In order to fix it, set fn->leaf to NULL before calling fib6_add_rt2node() when trying to add the first default route. And reset fn->leaf to null_entry when adding fails or when deleting the last default route. syzkaller reported the following issue which is fixed by this commit: WARNING: suspicious RCU usage 4.15.0-rc5+ #171 Not tainted ----------------------------- net/ipv6/ip6_fib.c:1702 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by swapper/0/0: #0: ((&net->ipv6.ip6_fib_timer)){+.-.}, at: [<00000000d43f631b>] lockdep_copy_map include/linux/lockdep.h:178 [inline] #0: ((&net->ipv6.ip6_fib_timer)){+.-.}, at: [<00000000d43f631b>] call_timer_fn+0x1c6/0x820 kernel/time/timer.c:1310 #1: (&(&net->ipv6.fib6_gc_lock)->rlock){+.-.}, at: [<000000002ff9d65c>] spin_lock_bh include/linux/spinlock.h:315 [inline] #1: (&(&net->ipv6.fib6_gc_lock)->rlock){+.-.}, at: [<000000002ff9d65c>] fib6_run_gc+0x9d/0x3c0 net/ipv6/ip6_fib.c:2007 #2: (rcu_read_lock){....}, at: [<0000000091db762d>] __fib6_clean_all+0x0/0x3a0 net/ipv6/ip6_fib.c:1560 #3: (&(&tb->tb6_lock)->rlock){+.-.}, at: [<000000009e503581>] spin_lock_bh include/linux/spinlock.h:315 [inline] #3: (&(&tb->tb6_lock)->rlock){+.-.}, at: [<000000009e503581>] __fib6_clean_all+0x1d0/0x3a0 net/ipv6/ip6_fib.c:1948 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.15.0-rc5+ #171 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4585 fib6_del+0xcaa/0x11b0 net/ipv6/ip6_fib.c:1701 fib6_clean_node+0x3aa/0x4f0 net/ipv6/ip6_fib.c:1892 fib6_walk_continue+0x46c/0x8a0 net/ipv6/ip6_fib.c:1815 fib6_walk+0x91/0xf0 net/ipv6/ip6_fib.c:1863 fib6_clean_tree+0x1e6/0x340 net/ipv6/ip6_fib.c:1933 __fib6_clean_all+0x1f4/0x3a0 net/ipv6/ip6_fib.c:1949 fib6_clean_all net/ipv6/ip6_fib.c:1960 [inline] fib6_run_gc+0x16b/0x3c0 net/ipv6/ip6_fib.c:2016 fib6_gc_timer_cb+0x20/0x30 net/ipv6/ip6_fib.c:2033 call_timer_fn+0x228/0x820 kernel/time/timer.c:1320 expire_timers kernel/time/timer.c:1357 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1660 run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:540 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:904 </IRQ> Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 66f5d6ce ("ipv6: replace rwlock with rcu and spinlock in fib6_table") Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sergei Shtylyov says: ==================== Ether fixes for the SolutionEngine771x boards Here's the series of 2 patches against Linus' repo. This series should (hoplefully) fix the Ether support on the SolutionEngine771x boards... [1/2] SolutionEngine771x: fix Ether platform data [2/2] SolutionEngine771x: add Ether TSU resource ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
After the Ether platform data is fixed, the driver probe() method would still fail since the 'struct sh_eth_cpu_data' corresponding to SH771x indicates the presence of TSU but the memory resource for it is absent. Add the missing TSU resource to both Ether devices and fix the harmless off-by-one error in the main memory resources, while at it... Fixes: 4986b996 ("net: sh_eth: remove the SH_TSU_ADDR") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sergei Shtylyov authored
The 'sh_eth' driver's probe() method would fail on the SolutionEngine7710 board and crash on SolutionEngine7712 board as the platform code is hopelessly behind the driver's platform data -- it passes the PHY address instead of 'struct sh_eth_plat_data *'; pass the latter to the driver in order to fix the bug... Fixes: 71557a37 ("[netdrvr] sh_eth: Add SH7619 support") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mike Rapoport authored
Fix the following 'make htmldocs' complaint: Documentation/networking/msg_zerocopy.rst:: WARNING: document isn't included in any toctree. Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolai Stange authored
Commit 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") fixed the issue of possibly inconsistent ->hdrincl handling due to concurrent updates by reading this bit-field member into a local variable and using the thus stabilized value in subsequent tests. However, aforementioned commit also adds the (correct) comment that /* hdrincl should be READ_ONCE(inet->hdrincl) * but READ_ONCE() doesn't work with bit fields */ because as it stands, the compiler is free to shortcut or even eliminate the local variable at its will. Note that I have not seen anything like this happening in reality and thus, the concern is a theoretical one. However, in order to be on the safe side, emulate a READ_ONCE() on the bit-field by doing it on the local 'hdrincl' variable itself: int hdrincl = inet->hdrincl; hdrincl = READ_ONCE(hdrincl); This breaks the chain in the sense that the compiler is not allowed to replace subsequent reads from hdrincl with reloads from inet->hdrincl. Fixes: 8f659a03 ("net: ipv4: fix for a race condition in raw_sendmsg") Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xiongfeng Wang authored
gcc-8 reports net/caif/caif_dev.c: In function 'caif_enroll_dev': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] net/caif/cfctrl.c: In function 'cfctrl_linkup_request': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] net/caif/cfcnfg.c: In function 'caif_connect_client': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] The compiler require that the input param 'len' of strncpy() should be greater than the length of the src string, so that '\0' is copied as well. We can just use strlcpy() to avoid this warning. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrii Vladyka authored
Use AF_INET6 instead of AF_INET in IPv6-related code path Signed-off-by: Andrii Vladyka <tulup@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Frag and UDP handling fixes in i40e driver, from Amritha Nambiar and Alexander Duyck. 2) Undo unintentional UAPI change in netfilter conntrack, from Florian Westphal. 3) Revert a change to how error codes are returned from dev_get_valid_name(), it broke some apps. 4) Cannot cache routes for ipv6 tunnels in the tunnel is ipv4/ipv6 dual-stack. From Eli Cooper. 5) Fix missed PMTU updates in geneve, from Xin Long. 6) Cure double free in macvlan, from Gao Feng. 7) Fix heap out-of-bounds write in rds_message_alloc_sgs(), from Mohamed Ghannam. 8) FEC bug fixes from FUgang Duan (mis-accounting of dev_id, missed deferral of probe when the regulator is not ready yet). 9) Missing DMA mapping error checks in 3c59x, from Neil Horman. 10) Turn off Broadcom tags for some b53 switches, from Florian Fainelli. 11) Fix OOPS when get_target_net() is passed an SKB whose NETLINK_CB() isn't initialized. From Andrei Vagin. 12) Fix crashes in fib6_add(), from Wei Wang. 13) PMTU bug fixes in SCTP from Marcelo Ricardo Leitner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) sh_eth: fix TXALCR1 offsets mdio-sun4i: Fix a memory leak phylink: mark expected switch fall-throughs in phylink_mii_ioctl sctp: fix the handling of ICMP Frag Needed for too small MTUs sctp: do not retransmit upon FragNeeded if PMTU discovery is disabled xen-netfront: enable device after manual module load bnxt_en: Fix the 'Invalid VF' id check in bnxt_vf_ndo_prep routine. bnxt_en: Fix population of flow_type in bnxt_hwrm_cfa_flow_alloc() sh_eth: fix SH7757 GEther initialization net: fec: free/restore resource in related probe error pathes uapi/if_ether.h: prevent redefinition of struct ethhdr ipv6: fix general protection fault in fib6_add() RDS: null pointer dereference in rds_atomic_free_op sh_eth: fix TSU resource handling net: stmmac: enable EEE in MII, GMII or RGMII only rtnetlink: give a user socket to get_target_net() MAINTAINERS: Update my email address. can: ems_usb: improve error reporting for error warning and error passive can: flex_can: Correct the checking for frame length in flexcan_start_xmit() can: gs_usb: fix return value of the "set_bittiming" callback ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Doug Ledford: - One line fix to mlx4 error flow (same as mlx5 fix in last pull request, just in the mlx4 driver) - Fix a race condition in the IPoIB driver. This patch is larger than just a one line fix, but resolves a race condition in a fairly straight forward manner - Fix a locking issue in the RDMA netlink code. This patch is also larger than I would like for a late -rc. It has, however, had a week to bake in the rdma tree prior to this pull request - One line fix to fix granting remote machine access to memory that they don't need and shouldn't have - One line fix to correct the fact that our sgid/dgid pair is swapped from what you would expect when receiving an incoming connection request * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/srpt: Fix ACL lookup during login IB/srpt: Disable RDMA access by the initiator RDMA/netlink: Fix locking around __ib_get_device_by_index IB/ipoib: Fix race condition in neigh creation IB/mlx4: Fix mlx4_ib_alloc_mr error flow
-
- 08 Jan, 2018 6 commits
-
-
Alexei Starovoitov authored
Under speculation, CPUs may mis-predict branches in bounds checks. Thus, memory accesses under a bounds check may be speculated even if the bounds check fails, providing a primitive for building a side channel. To avoid leaking kernel data round up array-based maps and mask the index after bounds check, so speculated load with out of bounds index will load either valid value from the array or zero from the padded area. Unconditionally mask index for all array types even when max_entries are not rounded to power of 2 for root user. When map is created by unpriv user generate a sequence of bpf insns that includes AND operation to make sure that JITed code includes the same 'index & index_mask' operation. If prog_array map is created by unpriv user replace bpf_tail_call(ctx, map, index); with if (index >= max_entries) { index &= map->index_mask; bpf_tail_call(ctx, map, index); } (along with roundup to power 2) to prevent out-of-bounds speculation. There is secondary redundant 'if (index >= max_entries)' in the interpreter and in all JITs, but they can be optimized later if necessary. Other array-like maps (cpumap, devmap, sockmap, perf_event_array, cgroup_array) cannot be used by unpriv, so no changes there. That fixes bpf side of "Variant 1: bounds check bypass (CVE-2017-5753)" on all architectures with and without JIT. v2->v3: Daniel noticed that attack potentially can be crafted via syscall commands without loading the program, so add masking to those paths as well. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fix from Darren Hart: "Address a wmi initcall ordering race resulting in a difficult to reproduce boot failure" * tag 'platform-drivers-x86-v4.15-4' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: wmi: Call acpi_wmi_init() later
-
Sergei Shtylyov authored
The TXALCR1 offsets are incorrect in the register offset tables, most probably due to copy&paste error. Luckily, the driver never uses this register. :-) Fixes: 4a55530f ("net: sh_eth: modify the definitions of register") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
If the probing of the regulator is deferred, the memory allocated by 'mdiobus_alloc_size()' will be leaking. It should be freed before the next call to 'sun4i_mdio_probe()' which will reallocate it. Fixes: 4bdcb1dd ("net: Add MDIO bus driver for the Allwinner EMAC") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1463447 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Marcelo Ricardo Leitner says: ==================== SCTP PMTU discovery fixes This patchset fixes 2 issues with PMTU discovery that can lead to flood of retransmissions. The first patch fixes the issue for when PMTUD is disabled by the application, while the second fixes it for when its enabled. Please consider these to stable. ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-