Now that everyone is using [devm_]fwnode_gpiod_get[_index]() APIs,
remove OF-specific [devm_]gpiod_get_from_of_node().
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

There are no more users of these APIs in the mainline kernel, remove
them. This leaves of_get_named_gpio() as the only legacy OF-specific
API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The function is only being called form the main gpiolib module, so
remove comment saying that it is also used by external callers.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The only user of this function is gpiolib-of.c so move it there.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

There are no more users of of_gpio_count() in the mainline kernel,
remove it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Convert the Fujitsu MB86S7x GPIO binding to DT schema format.

The "socionext,synquacer-gpio" compatible was not documented, but is
compatible with "fujitsu,mb86s70-gpio" and is in use (in u-boot
Synquacer dts).
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

All i8255 library consumers have migrated to the new interface
leveraging the gpio-regmap API. Legacy interface functions and code are
removed as no longer needed.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. The gpio-mm module is migrated to the new i8255
library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. The 104-dio-48e module is migrated to the new
i8255 library interface leveraging the gpio-regmap API.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

By leveraging the gpio-regmap API, the i8255 library is reduced to
simply a devm_i8255_regmap_register() function, a configuration
structure struct i8255_regmap_config, and a helper macro
i8255_volatile_regmap_range() provided to simplify volatile PPI register
hinting for the regmap.

Legacy functions and code will be removed once all consumers have
migrated to the new i8255 library interface.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Despite the underlying interface being based on
i8255, it is simpler to use the gpio-regmap API directly because the
104-IDI-48 device features only input signals. Therefore, the dependence
on the i8255 GPIO library is removed in this patch.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

For the 104-idi-48, we get an IRQ register with some status information
and basic masking, but it's broken down by banks rather than individual
GPIO. There are six banks (8 GPIO lines each) that correspond to the
lower six bits of the IRQ register (bits 0-5):

    Base Address + 7 (Read): IRQ Status Register/IRQ Clear
        Bit 0-5: Respective Bank IRQ Statuses
        Bit 6: IRQ Status (Active Low)
        Bit 7: IRQ Enable Status
    Base Address + 7 (Write): IRQ Enable/Disable
        Bit 0-5: Respective Bank IRQ Enable/Disable
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

For the 104-dio-48e we have the following IRQ registers (0xB and 0xF):

    Base Address +B (Write): Enable Interrupt
    Base Address +B (Read): Disable Interrupt
    Base Address +F (Read/Write): Clear Interrupt

Any write to 0xB will enable interrupts, while any read will disable
interrupts. Interrupts are cleared by a write to 0xF. There's no IRQ
status register, so software has to assume that if an interrupt is
raised then it was for the 104-DIO-48E device.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

If you only have reg_dat_base set, then it is input-only; if you only
have reg_set_base set, then it is output-only. Thus, we can always set
gpio_chip get_direction to gpio_regmap_get_direction and return
GPIO_LINE_DIRECTION_IN/GPIO_LINE_DIRECTION_OUT given the respective
register base addresses configuration.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

First of all, PCAL953X_OUT_CONF is not used in the driver.
Second, it's not a per-bank register, it's a single for the
chip and should be handled differently anyway.

To avoid confusion, drop PCAL953X_OUT_CONF from pcal6534_recalc_addr().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The pcal6534_check_register() is a bit too verbose.
Clean up it, by deduplicating some operations and
switching to the modulo operation as on some architectures
/ and % can become a single assembly instruction.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The current code logic make the condition "else if (reg >= 0x54)"
can't be true, cause the dead code. So fix it to match the coder
expectation. This is reported by Coverity.

Fixes: 13c5d4ce ("gpio: pca953x: Add support for PCAL6534")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Use the irq_domain_alloc_irqs() wrapper instead of the full
__irq_domain_alloc_irqs() interface, which was only intended for some
legacy (x86) use cases.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull irq fix from Borislav Petkov:

 - Cleanup the firmware node for the new IRQ MSI domain properly, to
   avoid leaking memory

* tag 'irq_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/msi: Free the fwnode created by msi_create_device_irq_domain()

Pull x86 fixes from Borislav Petkov:

 - Start checking for -mindirect-branch-cs-prefix clang support too now
   that LLVM 16 will support it

 - Fix a NULL ptr deref when suspending with Xen PV

 - Have a SEV-SNP guest check explicitly for features enabled by the
   hypervisor and fail gracefully if some are unsupported by the guest
   instead of failing in a non-obvious and hard-to-debug way

 - Fix a MSI descriptor leakage under Xen

 - Mark Xen's MSI domain as supporting MSI-X

 - Prevent legacy PIC interrupts from being resent in software by
   marking them level triggered, as they should be, which lead to a NULL
   ptr deref

* tag 'x86_urgent_for_v6.2_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Move '-mindirect-branch-cs-prefix' out of GCC-only block
  acpi: Fix suspend with Xen PV
  x86/sev: Add SEV-SNP guest feature negotiation support
  x86/pci/xen: Fixup fallout from the PCI/MSI overhaul
  x86/pci/xen: Set MSI_FLAG_PCI_MSIX support in Xen MSI domain
  x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL

Pull input fixes from Dmitry Torokhov:

 - touchpads on HP 15-* laptops switched back to PS/2 emulation mode

 - a quirk for Clevo PCX0DX/TUXEDO XP1511 to make sure keyboard is
   responding after resume

* tag 'input-for-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Clevo PCX0DX to i8042 quirk table
  Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"

Pull cxl fixes from Dan Williams:
 "A couple of fixes for bugs introduced during the merge window. One is
  a regression, the other was a bug in the CXL AER handler:

   - Fix a crash regression due to module load order of cxl_pmem.ko

   - Fix wrong register offset read in CXL AER handling path"

* tag 'cxl-fixes-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmem: Fix nvdimm unregistration when cxl_pmem driver is absent
  cxl: fix cxl_report_and_clear() RAS UE addr mis-assignment

This reverts commit 7efc3b72.

We have got openSUSE reports (Link 1) for 6.1 kernel with khugepaged
stalling CPU for long periods of time.  Investigation of tracepoint data
shows that compaction is stuck in repeating fast_find_migrateblock()
based migrate page isolation, and then fails to migrate all isolated
pages.

Commit 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
was suspected as it was merged in 6.1 and in theory can indeed remove a
termination condition for fast_find_migrateblock() under certain
conditions, as it removes a place that always marks a scanned pageblock
from being re-scanned.  There are other such places, but those can be
skipped under certain conditions, which seems to match the tracepoint
data.

Testing of revert also appears to have resolved the issue, thus revert
the commit until a more robust solution for the original problem is
developed.

It's also likely this will fix qemu stalls with 6.1 kernel reported in
Link 2, but that is not yet confirmed.

Link: https://bugzilla.suse.com/show_bug.cgi?id=1206848
Link: https://lore.kernel.org/kvm/b8017e09-f336-3035-8344-c549086c2340@kernel.org/
Link: https://lore.kernel.org/lkml/20230125134434.18017-1-mgorman@techsingularity.net/
Fixes: 7efc3b72 ("mm/compaction: fix set skip in fast_find_migrateblock")
Cc: <stable@vger.kernel.org>
Tested-by: Pedro Falcato <pedro.falcato@gmail.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Joe found another DT file that shouldn't be executable, and that
frustrated me enough that I went hunting with this script:

    git ls-files -s |
        grep '^100755' |
        cut -f2 |
        xargs grep -L '^#!'

and that found another file that shouldn't have been marked executable
either, despite being in the scripts directory.

Maybe these two are the last ones at least for now.  But I'm sure we'll
be back in a few years, fixing things up again.

Fixes: 8c6789f4 ("ASoC: dt-bindings: Add Everest ES8326 audio CODEC")
Fixes: 4d8e5cd2 ("locking/atomics: Fix scripts/atomic/ script permissions")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ksmbd server fixes from Steve French:
 "Four smb3 server fixes, all also for stable:

   - fix for signing bug

   - fix to more strictly check packet length

   - add a max connections parm to limit simultaneous connections

   - fix error message flood that can occur with newer Samba xattr
     format"

* tag '6.2-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: downgrade ndr version error message to debug
  ksmbd: limit pdu length size according to connection status
  ksmbd: do not sign response to session request for guest login
  ksmbd: add max connections parameter

Pull cifs fix from Steve French:
 "Fix for reconnect oops in smbdirect (RDMA), also is marked for stable"

* tag '6.2-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix oops due to uncleared server->smbd_conn in reconnect

Pull block fixes from Jens Axboe:
 "Minor tweaks for this release:

   - NVMe pull request via Christoph:
        - Flush initial scan_work for async probe (Keith Busch)
        - Fix passthrough csi check (Keith Busch)
        - Fix nvme-fc initialization order (Ross Lagerwall)

   - Fix for tearing down non-started device in ublk (Ming)"

* tag 'block-6.2-2023-01-27' of git://git.kernel.dk/linux:
  block: ublk: move ublk_chr_class destroying after devices are removed
  nvme: fix passthrough csi check
  nvme-pci: flush initial scan_work for async probe
  nvme-fc: fix initialization order

Pull io_uring fixes from Jens Axboe:
 "Two small fixes for this release:

   - Sanitize how async prep is done for drain requests, so we ensure
     that it always gets done (Dylan)

   - A ring provided buffer recycling fix for multishot receive (me)"

* tag 'io_uring-6.2-2023-01-27' of git://git.kernel.dk/linux:
  io_uring: always prep_async for drain requests
  io_uring/net: cache provided buffer group value for multishot receives

Pull hardening fixes from Kees Cook:

 - Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

 - Reorganize gcc-plugin includes for GCC 13

 - Silence bcache memcpy run-time false positive warnings

* tag 'hardening-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  bcache: Silence memcpy() run-time false positive warnings
  gcc-plugins: Reorganize gimple includes for GCC 13
  kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST

Pull tracing fixes from Steven Rostedt:

 - Fix filter memory leak by calling ftrace_free_filter()

 - Initialize trace_printk() earlier so that ftrace_dump_on_oops shows
   data on early crashes.

 - Update the outdated instructions in scripts/tracing/ftrace-bisect.sh

 - Add lockdep_is_held() to fix lockdep warning

 - Add allocation failure check in create_hist_field()

 - Don't initialize pointer that gets set right away in enabled_monitors_write()

 - Update MAINTAINER entries

 - Fix help messages in Kconfigs

 - Fix kernel-doc header for update_preds()

* tag 'trace-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Update MAINTAINERS file to add tree and mailing list
  rv: remove redundant initialization of pointer ptr
  ftrace: Maintain samples/ftrace
  tracing/filter: fix kernel-doc warnings
  lib: Kconfig: fix spellos
  trace_events_hist: add check for return value of 'create_hist_field'
  tracing/osnoise: Use built-in RCU list checking
  tracing: Kconfig: Fix spelling/grammar/punctuation
  ftrace/scripts: Update the instructions for ftrace-bisect.sh
  tracing: Make sure trace_printk() can output as soon as it can be used
  ftrace: Export ftrace_free_filter() to modules

Pull i2c fixes from Wolfram Sang:
 "A bunch of driver fixes with a tiny bit of new IDs"

* tag 'i2c-for-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rk3x: fix a bunch of kernel-doc warnings
  i2c: axxia: use 'struct' for kernel-doc notation
  dt-bindings: i2c: renesas,rzv2m: Fix SoC specific string
  i2c: mxs: suppress probe-deferral error message
  i2c: designware-pci: Add new PCI IDs for AMD NAVI GPU
  i2c: designware: Fix unbalanced suspended flag
  i2c: designware: use casting of u64 in clock multiplication to avoid overflow

Pull gpio fixes from Bartosz Golaszewski:

 - fix the -c option in the gpio-event-mode user-space example program

 - fix the irq number translation in gpio-ep93xx and make its irqchip
   immutable

 - add a missing spin_unlock in error path in gpio-mxc

 - fix a suspend breakage on System76 and Lenovo Gen2a introduced in
   GPIO ACPI

* tag 'gpio-fixes-for-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  tools: gpio: fix -c option of gpio-event-mon
  gpio: ep93xx: remove unused variable
  gpio: ep93xx: Make irqchip immutable
  gpio: ep93xx: Fix port F hwirq numbers in handler
  gpio: mxc: Unlock on error path in mxc_flip_edge()
  gpiolib-acpi: Don't set GPIOs for wakeup in S3 mode

Merge tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "A fix for the DT binding documentation which dropped a property when
  being converted to YAML format causing spurious errors validating
  device trees for platforms using the device"

* tag 'regulator-fix-v6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios

Pull overlayfs fixes from Miklos Szeredi:
 "Fix two bugs, a recent one introduced in the last cycle, and an older
  one from v5.11"

* tag 'ovl-fixes-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fail on invalid uid/gid mapping at copy up
  ovl: fix tmpfile leak

Pull drm fixes from Dave Airlie:
 "Fairly small this week as well, i915 has a memory leak fix and some
  minor changes, and amdgpu has some MST fixes, and some other minor
  ones:

  drm:
   - DP MST kref fix
   - fb_helper: check return value

  i915:
   - Fix BSC default context for Meteor Lake
   - Fix selftest-scheduler's modify_type
   - memory leak fix

  amdgpu:
   - GC11.x fixes
   - SMU13.0.0 fix
   - Freesync video fix
   - DP MST fixes
   - build fix"

* tag 'drm-fixes-2023-01-27' of git://anongit.freedesktop.org/drm/drm:
  amdgpu: fix build on non-DCN platforms.
  drm/amd/display: Fix timing not changning when freesync video is enabled
  drm/display/dp_mst: Correct the kref of port.
  drm/amdgpu/display/mst: update mst_mgr relevant variable when long HPD
  drm/amdgpu/display/mst: limit payload to be updated one by one
  drm/amdgpu/display/mst: Fix mst_state->pbn_div and slot count assignments
  drm/amdgpu: declare firmware for new MES 11.0.4
  drm/amdgpu: enable imu firmware for GC 11.0.4
  drm/amd/pm: add missing AllowIHInterrupt message mapping for SMU13.0.0
  drm/amdgpu: remove unconditional trap enable on add gfx11 queues
  drm/fb-helper: Use a per-driver FB deferred I/O handler
  drm/fb-helper: Check fb_deferred_io_init() return value
  drm/i915/selftest: fix intel_selftest_modify_policy argument types
  drm/i915/mtl: Fix bcs default context
  drm/i915: Fix a memory leak with reused mmap_offset
  drm/drm_vma_manager: Add drm_vma_node_allow_once()

Pull ACPI fixes from Rafael Wysocki:
 "Add ACPI backlight handling quirks for 3 machines (Hans de Goede)"

* tag 'acpi-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add backlight=native DMI quirk for Asus U46E
  ACPI: video: Add backlight=native DMI quirk for HP EliteBook 8460p
  ACPI: video: Add backlight=native DMI quirk for HP Pavilion g6-1d80nr

Pull thermal control fixes from Rafael Wysocki:
 "Add locking to the Intel int340x thermal control driver to prevent its
  thermal zone callbacks from racing with firmware-induced thermal trip
  point updates (Srinivas Pandruvada, Rafael Wysocki)"

* tag 'thermal-6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()
  thermal: intel: int340x: Protect trip temperature from concurrent updates

Pull arm64 fix from Will Deacon:

 - Fix event counting regression in Arm CMN PMU driver due to broken
   optimisation

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Partially revert "perf/arm-cmn: Optimise DTC counter accesses"