- 12 Jun, 2022 2 commits
-
-
Heikki Krogerus authored
Introducing a small device class for USB Power Delivery. The idea with it is that we do not mix any more USB Power Delivery information into the USB Type-C connectors only. This separation will make it possible to register USB Power Delivery devices also from other places, for example from USB Type-C Bridges (see USB Type-C Bridge Specification). The device class will not always deal with only the messages and objects that were negotiated with the partner, but instead messages and objects that can be used in the negotiation. That allows the USB PD devices to be shared and reconfigured. The ports can decide which objects are to be advertised to the partner before the contract is negotiated. It is also possible to allow the user space to make that decision if needed. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220502132058.86236-2-heikki.krogerus@linux.intel.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Grzeschik authored
In some cases the port of an hub needs to be disabled or switched off and on again. E.g. when the connected device needs to be re-enumerated. Or it needs to be explicitly disabled while the rest of the usb tree stays working. For this purpose this patch adds an sysfs switch to enable/disable the port on any hub. In the case the hub is supporting power switching, the power line will be disabled to the connected device. When the port gets disabled, the associated device gets disconnected and removed from the logical usb tree. No further device will be enumerated on that port until the port gets enabled again. Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220607114522.3359148-1-m.grzeschik@pengutronix.deSigned-off-by:
-
- 10 Jun, 2022 28 commits
-
-
Sanket Goswami authored
Some of the AMD platforms have Cypress CCGX PD controller connected to system I2C i.e designware I2C controller. Added support to enumerate the CCGX client by adding ACPI ID to the firmware. Suggested-by:
Sanket Goswami <Sanket.Goswami@amd.com> Link: https://lore.kernel.org/r/20220526063305.3144352-3-Sanket.Goswami@amd.comSigned-off-by:
-
Sanket Goswami authored
The current implementation supports only Level trigger with ACTIVE HIGH, which is overriding level and polarity set by the ACPI table, hence implement the common utility function to manage irq requests. Suggested-by:
-
Chunfeng Yun authored
Use threaded irq to improve time consuming top-half Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220609074233.15532-3-chunfeng.yun@mediatek.comSigned-off-by:
-
Chunfeng Yun authored
Implement udc_async_callbacks hook function to avoid a race when unnbinding gadget drivers, refer to: 7dc0c55e ('USB: UDC core: Add udc_async_callbacks gadget op') Signed-off-by:
-
Chunfeng Yun authored
Register gadget irq to avoid the interrupt handler is occurred or scheduled during the unbind flow, may happen when do android function switch stress test. Signed-off-by:
-
Saurav Girepunje authored
In musb_remove() cancel_delayed_work_sync(&musb->irq_work) is called which flush the irq_work work queue. After cancel delayed work, musb_remove() call musb_gadget_cleanup->usb_del_gadget_udc->usb_del_gadget ->usb_gadget_remove_driver->usb_gadget_udc_stop->udc ->gadget->ops->udc_stop(udc->gadget); Where musb_gadget_stop() call "schedule_delayed_work(&musb->irq_work, 0)” which is already cancel/flush. So remove the schedule_delayed_work(&musb->irq_work, 0); from musb_gadget_stop function. Signed-off-by:
Saurav Girepunje <saurav.girepunje@gmail.com> Link: https://lore.kernel.org/r/YqDnxkWZV2KfZh5q@Sauravs-MacBook-Air.localSigned-off-by:
-
Michael Grzeschik authored
Likewise to the uvcvideo hostside driver, this patch is changing the usb_request message of an non zero completion handler call from dev_info to dev_warn. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Michael Grzeschik authored
The current limitation of possible number of requests being handled is dependent on the gadget speed. It makes more sense to depend on the typical frame size when calculating the number of requests. This patch is changing this and is using the previous limits as boundaries for reasonable minimum and maximum number of requests. For a 1080p jpeg encoded video stream with a maximum imagesize of e.g. 800kB with a maxburst of 8 and an multiplier of 1 the resulting number of requests is calculated to 49. 800768 1 nreqs = ------ * -------------- ~= 49 2 (1024 * 8 * 1) Tested-by:Dan Vacura <w36195@motorola.com> Signed-off-by:
-
Chunfeng Yun authored
Add support controller reset via a reset-controller usually in infracfg, it's different with the software reset by IPPC which only used to reset MAC, and it will also reset IPPC meanwhile. Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Chunfeng Yun authored
Add support controller reset via a reset-controller usually in infracfg, it's different with the software reset by IPPC which only used to reset MAC, and it will also reset IPPC meanwhile. Reviewed-by:
-
Chunfeng Yun authored
Add 'resets' property to support IP reset usually by top pericfg. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chunfeng Yun authored
Add 'resets' property to support IP reset usually by top pericfg. Reviewed-by:
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20220521111145.81697-85-Julia.Lawall@inria.frSigned-off-by:
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Julia Lawall authored
Spelling mistake (triple letters) in comment. Detected with the help of Coccinelle. Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
-
Tang Bin authored
In the function tegra_xusb_powerdomain_init(), dev_pm_domain_attach_by_name() may return NULL in some cases, so IS_ERR() doesn't meet the requirements. Thus fix it. Fixes: 6494a9ad ("usb: xhci: tegra: Add genpd support") Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20220524121404.18376-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Tang Bin authored
dev_pm_domain_attach_by_name() may return NULL in some cases, so IS_ERR() doesn't meet the requirements. Thus fix it. Fixes: 49db4272 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller") Signed-off-by:
-
Prashanth K authored
Currently the VBUS/ID detection interrupts are disabled during system suspend. So the USB cable connect/disconnect event can't wakeup the system from low power mode. To allow this, we keep these interrupts enabled and configure them as wakeup capable. This behavior can be controlled through device wakeup source policy by the user space. Signed-off-by:
Prashanth K <quic_prashk@quicinc.com> Link: https://lore.kernel.org/r/1653634146-12215-1-git-send-email-quic_prashk@quicinc.comSigned-off-by:
-
Dan Carpenter authored
This code does: spin_unlock_irq(&udc->ud.lock); spin_unlock_irqrestore(&udc->lock, flags); which does not make sense. In theory, the first unlock could enable IRQs and then the second _irqrestore could disable them again. There would be a brief momemt where IRQs were enabled improperly. In real life, however, this function is always called with IRQs enabled and the bug does not affect runtime. Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yo4hVWcZNYzKEkIQ@kiliSigned-off-by:
-
Dan Carpenter authored
It generally doesn't make sense to use _irq() and _irqsave() in the same function because either some of the callers have disabled IRQs or they haven't. In this case, the v_recv_cmd_submit() appears to always be called with IRQs enabled so the code works fine. That means I could convert it to either _irq() or _irqsave() but I chose to use _irqsave() because it's more conservative and easier to review. Reviewed-by:
-
Kushagra Verma authored
Commit 57303488 ("usb: dwc3: adapt dwc3 core to use Generic PHY Framework") added if statements that check 'ret == -ENOSYS || ret == -ENODEV', but the function phy_get() which is called by devm_phy_get() returns the phy driver or -ENODEV if the phy driver was not found. So, remove the check of -ENOSYS in the if statements. Signed-off-by:
Kushagra Verma <kushagra765@outlook.com> Link: https://lore.kernel.org/r/HK0PR01MB2801E19D4FE569545BB7592DF8A19@HK0PR01MB2801.apcprd01.prod.exchangelabs.comSigned-off-by:
-
Clément Léger authored
When Linux is running under OP-TEE, the SFR is set as secured and thus the AT91_OHCIICR_USB_SUSPEND register isn't accessible. Add a SMC to do the appropriate call to suspend the controller. The SMC id is fetched from the device-tree property "microchip,suspend-smc-id". if present, then the syscon regmap is not used to enter suspend and a SMC is issued. Reviewed-by:
Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by:
Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220607133454.727063-1-clement.leger@bootlin.comSigned-off-by:
-
Miaoqian Lin authored
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 73108aa9 ("USB: ohci-nxp: Use isp1301 driver") Acked-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220603141231.979-1-linmq006@gmail.comSigned-off-by:
-
Miaoqian Lin authored
of_find_compatible_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 796bcae7 ("USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]") Acked-by:
-
Li Jun authored
Some SoC(e.g NXP imx8MQ) may have a wrong default power down scale setting so need init it to be the correct value, the power down scale setting description in DWC3 databook: Power Down Scale (PwrDnScale) The USB3 suspend_clk input replaces pipe3_rx_pclk as a clock source to a small part of the USB3 core that operates when the SS PHY is in its lowest power (P3) state, and therefore does not provide a clock. The Power Down Scale field specifies how many suspend_clk periods fit into a 16 kHz clock period. When performing the division, round up the remainder. For example, when using an 8-bit/16-bit/32-bit PHY and 25-MHz Suspend clock, Power Down Scale = 25000 kHz/16 kHz = 13'd1563 (rounder up) So use the suspend clock rate to calculate it. Reviewed-by:
Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by:
Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1654568404-3461-1-git-send-email-jun.li@nxp.comSigned-off-by:
-
Frank Li authored
Warning log: [ 4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code! [ 4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20 [ 4.158010] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.163155] Call trace: [ 4.165600] dump_backtrace+0x0/0x1b0 [ 4.169286] show_stack+0x18/0x68 [ 4.172611] dump_stack_lvl+0x68/0x84 [ 4.176286] dump_stack+0x18/0x34 [ 4.179613] kmalloc_fix_flags+0x60/0x88 [ 4.183550] new_slab+0x334/0x370 [ 4.186878] ___slab_alloc.part.108+0x4d4/0x748 [ 4.191419] __slab_alloc.isra.109+0x30/0x78 [ 4.195702] kmem_cache_alloc+0x40c/0x420 [ 4.199725] dma_pool_alloc+0xac/0x1f8 [ 4.203486] cdns3_allocate_trb_pool+0xb4/0xd0 pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags) { ... page = kmalloc(sizeof(*page), mem_flags); page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation, &page->dma, mem_flags); ... } kmalloc was called with mem_flags, which is passed down in cdns3_allocate_trb_pool() and have GFP_DMA32 flags. kmall_fix_flags() report warning. GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle DMA memory region correctly by pool->dev. GFP_DMA32 can be removed safely. Signed-off-by:Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20220609154456.2871672-1-Frank.Li@nxp.comSigned-off-by:
-
Frank Li authored
BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xac cdns3_wa2_remove_old_request() { ... kfree(priv_req->request.buf); cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ^^^ use after free ... } cdns3_gadget_ep_free_request() free the space pointed by priv_req, but priv_req is used in the following list_del_init(). This patch move list_del_init() before cdns3_gadget_ep_free_request(). Signed-off-by:Faqiang Zhu <faqiang.zhu@nxp.com> Link: https://lore.kernel.org/r/20220608190430.2814358-1-Frank.Li@nxp.comSigned-off-by:
-
Laurent Pinchart authored
The UVC gadget driver historically uses the /* Comment * style */ for multi-line block comments, which is frowned upon. Patches for the driver are required to use the more standard /* * Comment * style */ style. This result in inconsistencies. Fix it by converting all remaining instances of the old style. Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
- 06 Jun, 2022 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull file descriptor fix from Al Viro: "Fix for breakage in #work.fd this window" * tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix the breakage in close_fd_get_file() calling conventions change
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull mm hotfixes from Andrew Morton: "Fixups for various recently-added and longer-term issues and a few minor tweaks: - fixes for material merged during this merge window - cc:stable fixes for more longstanding issues - minor mailmap and MAINTAINERS updates" * tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery x86/kexec: fix memory leak of elf header buffer mm/memremap: fix missing call to untrack_pfn() in pagemap_range() mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock() mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON MAINTAINERS: add maintainer information for z3fold mailmap: update Josh Poimboeuf's email
-
- 05 Jun, 2022 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull delay-accounting update from Andrew Morton: "A single featurette for delay accounting. Delayed a bit because, unusually, it had dependencies on both the mm-stable and mm-nonmm-stable queues" * tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: delayacct: track delays from write-protect copy
-
Linus Torvalds authored
The bluetooth code uses our bitmap infrastructure for the two bits (!) of connection setup flags, and in the process causes odd problems when it converts between a bitmap and just the regular values of said bits. It's completely pointless to do things like bitmap_to_arr32() to convert a bitmap into a u32. It shoudln't have been a bitmap in the first place. The reason to use bitmaps is if you have arbitrary number of bits you want to manage (not two!), or if you rely on the atomicity guarantees of the bitmap setting and clearing. The code could use an "atomic_t" and use "atomic_or/andnot()" to set and clear the bit values, but considering that it then copies the bitmaps around with "bitmap_to_arr32()" and friends, there clearly cannot be a lot of atomicity requirements. So just use a regular integer. In the process, this avoids the warnings about erroneous use of bitmap_from_u64() which were triggered on 32-bit architectures when conversion from a u64 would access two words (and, surprise, surprise, only one word is needed - and indeed overkill - for a 2-bit bitmap). That was always problematic, but the compiler seems to notice it and warn about the invalid pattern only after commit 0a97953f ("lib: add bitmap_{from,to}_arr64") changed the exact implementation details of 'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell. Fixes: fe92ee64 ("Bluetooth: hci_core: Rework hci_conn_params flags") Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/ Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/ Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by:
Yury Norov <yury.norov@gmail.com> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
It used to grab an extra reference to struct file rather than just transferring to caller the one it had removed from descriptor table. New variant doesn't, and callers need to be adjusted. Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com Fixes: 6319194e ("Unify the primitives for file descriptor closing") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 SGX fix from Thomas Gleixner: "A single fix for x86/SGX to prevent that memory which is allocated for an SGX enclave is accounted to the wrong memory control group" * tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Set active memcg prior to shmem allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm cleanup from Thomas Gleixner: "Use PAGE_ALIGNED() instead of open coding it in the x86/mm code" * tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 microcode updates from Thomas Gleixner: - Disable late microcode loading by default. Unless the HW people get their act together and provide a required minimum version in the microcode header for making a halfways informed decision its just lottery and broken. - Warn and taint the kernel when microcode is loaded late - Remove the old unused microcode loader interface - Remove a redundant perf callback from the microcode loader * tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Remove unnecessary perf callback x86/microcode: Taint and warn on late loading x86/microcode: Default-disable late loading x86/microcode: Rip out the OLD_INTERFACE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Thomas Gleixner: "A set of small x86 cleanups: - Remove unused headers in the IDT code - Kconfig indendation and comment fixes - Fix all 'the the' typos in one go instead of waiting for bots to fix one at a time" * tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix all occurences of the "the the" typo x86/idt: Remove unused headers x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
-
