- 10 Jul, 2024 18 commits
-
-
Alexander Lobakin authored
In C, we have structures and unions. Casting `void *` via macros is not only error-prone, but also looks confusing and awful in general. In preparation for splitting the queue structs, replace it with a union and direct array dereferences. Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Mina Almasry <almasrymina@google.com> Signed-off-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Alexander Lobakin authored
Add helpers to assert struct field layout, a bit more crazy and networking-specific than in <linux/cache.h>. They assume you have 3 CL-aligned groups (read-mostly, read-write, cold) in a struct you want to assert, and nothing besides them. For 64-bit with 64-byte cachelines, the assertions are as strict as possible, as the size can then be easily predicted. For the rest, make sure they don't cross the specified bound. Signed-off-by:
-
Alexander Lobakin authored
Instead of doing __cacheline_group_begin() __aligned(), use the new __cacheline_group_{begin,end}_aligned(), so that it will take care of the group alignment itself. Also replace open-coded `4 * sizeof(long)` in two places with a definition. Signed-off-by: -
Alexander Lobakin authored
__cacheline_group_begin(), unfortunately, doesn't align the group anyhow. If it is wanted, then you need to do something like __cacheline_group_begin(grp) __aligned(ALIGN) which isn't really convenient nor compact. Add the _aligned() counterparts to align the groups automatically to either the specified alignment (optional) or ``SMP_CACHE_BYTES``. Note that the actual struct layout will then be (on x64 with 64-byte CL): struct x { u32 y; // offset 0, size 4, padding 56 __cacheline_group_begin__grp; // offset 64, size 0 u32 z; // offset 64, size 4, padding 4 __cacheline_group_end__grp; // offset 72, size 0 __cacheline_group_pad__grp; // offset 72, size 0, padding 56 u32 w; // offset 128 }; The end marker is aligned to long, so that you can assert the struct size more strictly, but the offset of the next field in the structure will be aligned to the group alignment, so that the next field won't fall into the group it's not intended to. Add __LARGEST_ALIGN definition and LARGEST_ALIGN() macro. __LARGEST_ALIGN is the value to which the compilers align fields when __aligned_largest is specified. Sometimes, it might be needed to get this value outside of variable definitions. LARGEST_ALIGN() is macro which just aligns a value to __LARGEST_ALIGN. Also add SMP_CACHE_ALIGN(), similar to L1_CACHE_ALIGN(), but using ``SMP_CACHE_BYTES`` instead of ``L1_CACHE_BYTES`` as the former also accounts L2, needed in some cases. Signed-off-by: -
David S. Miller authored
Bartosz Golaszewski says: ==================== net: phy: aquantia: enable support for aqr115c This series addesses two issues with the aqr115c PHY on Qualcomm sa8775p-ride-r3 board and adds support for this PHY to the aquantia driver. While the manufacturer calls the 2.5G PHY mode OCSGMII, we reuse the existing 2500BASEX mode in the kernel to avoid extending the uAPI. It took me a while to resend because I noticed an issue with the PHY coming out of suspend with no possible interfaces listed and tracked it to the GLOBAL_CFG registers for different modes returning 0. A workaround has been added to the series. Unfortunately the HPG doesn't mention a proper way of doing it or even mention any such issue at all. Changes since v2: - add a patch that addresses an issue with GLOBAL_CFG registers returning 0 - reuse aqr113c_config_init() for aqr115c - improve commit messages, give more details on the 2500BASEX mode reuse Link to v2: https://lore.kernel.org/lkml/Zn4Nq1QvhjAUaogb@makrotopia.org/T/ Changes since v1: - split out the PHY patches into their own series - don't introduce new mode (OCSGMII) but use existing 2500BASEX instead - split the wait-for-FW patch into two: one renaming and exporting the relevant function and the second using it before checking the FW ID Link to v1: https://lore.kernel.org/linux-arm-kernel/20240619184550.34524-1-brgl@bgdev.pl/T/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bartosz Golaszewski authored
Add support for a new model to the Aquantia driver. This PHY supports 2.5 gigabit speeds. The PHY mode is referred to by the manufacturer as Overclocked SGMII (OCSGMII) but this actually is just 2500BASEX without in-band signalling so reuse the existing mode to avoid changing the uAPI. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
Bartosz Golaszewski authored
When the PHY is first coming up (or resuming from suspend), it's possible that although the FW status shows as running, we still see zeroes in the GLOBAL_CFG set of registers and cannot determine available modes. Since all models support 10M, add a poll and wait the config to become available. Signed-off-by:
-
Bartosz Golaszewski authored
Checking the firmware register before it complete the boot process makes no sense, it will report 0 even if FW is available from internal memory. Always wait for FW to boot before continuing or we'll unnecessarily try to load it from nvmem/filesystem and fail. Signed-off-by:
-
Bartosz Golaszewski authored
This function is quite generic in this driver and not limited to aqr107. We will use it outside its current compilation unit soon so rename it and declare it in the header. Signed-off-by:
-
Geert Uytterhoeven authored
Use the existing {low,upp}er_32_bits() helpers instead of defining custom variants. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/319d4a5313ac75f7bbbb6b230b6802b18075c3e0.1720430602.git.geert+renesas@glider.beSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Tariq Toukan says: ==================== mlx5 misc patches 2023-07-08 This patchset contains features and small enhancements from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20240708080025.1593555-1-tariqt@nvidia.comSigned-off-by:
-
Cosmin Ratiu authored
It is theoretically possible to return bogus uninitialized values from mlx5_tc_ct_entry_replace_rules, even though in practice this will never be the case as the flow rule will be part of at least the regular ct table or the ct nat table, if not both. But to reduce noise, initialize err to 0. Fixes: 49d37d05 ("net/mlx5: CT: Separate CT and CT-NAT tuple entries") Signed-off-by:
Cosmin Ratiu <cratiu@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/20240708080025.1593555-11-tariqt@nvidia.comSigned-off-by:
-
Dragos Tatulea authored
When the rx_hds_nodata_packets/bytes counters were added, the aggregate counters were omitted. This patch adds them. Fixes: e95c5b9e ("net/mlx5e: SHAMPO, Add header-only ethtool counters for header data split") Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
-
Yevgeny Kliteynik authored
No need to expose definer get/put functions as part of SW Steering API - they are internal functions. Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Reviewed-by:
Alex Vesker <valex@nvidia.com> Signed-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Improvements This patchset contains assortments of improvements to the mlxsw driver. Please see individual patches for details. ==================== Link: https://patch.msgid.link/cover.1720447210.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The driver triggers a "Secondary Bus Reset" (SBR) by calling __pci_reset_function_locked() which asserts the SBR bit in the "Bridge Control Register" in the configuration space of the upstream bridge for 2ms. This is done without locking the configuration space of the upstream bridge port, allowing user space to access it concurrently. Linux 6.11 will start warning about such unlocked resets [1][2]: pcieport 0000:00:01.0: unlocked secondary bus reset via: pci_reset_bus_function+0x51c/0x6a0 Avoid the warning and the concurrent access by locking the configuration space of the upstream bridge prior to the reset and unlocking it afterwards. [1] https://lore.kernel.org/all/171711746953.1628941.4692125082286867825.stgit@dwillia2-xfh.jf.intel.com/ [2] https://lore.kernel.org/all/20240531213150.GA610983@bhelgaas/Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
-
Ido Schimmel authored
Commit 31a0fa00 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()") changed the thermal core to read the current state of the cooling device as part of the cooling device's registration. This is incompatible with the current implementation of the cooling device operations in mlxsw, leading to initialization failure with errors such as: mlxsw_spectrum 0000:01:00.0: Failed to register cooling device mlxsw_spectrum 0000:01:00.0: cannot register bus device The reason for the failure is that when the get current state operation is invoked the driver tries to derive the index of the cooling device by walking a per thermal zone array and looking for the matching cooling device pointer. However, the pointer is returned from the registration function and therefore only set in the array after the registration. The issue was later fixed by commit 1af89ded ("thermal: core: Do not fail cdev registration because of invalid initial state") by not failing the registration of the cooling device if it cannot report a valid current state during registration, although drivers are responsible for ensuring that this will not happen. Therefore, make sure the driver is able to report a valid current state for the cooling device during registration by passing to the registration function a per cooling device private data that already has the cooling device index populated. While at it, call thermal_cooling_device_unregister() unconditionally since the function returns immediately if the cooling device pointer is NULL. Reviewed-by:
Vadim Pasternak <vadimp@nvidia.com> Signed-off-by:
-
Petr Machata authored
A forgotten or buggy variable initialization can cause out-of-bounds access to a register or other item array field. For an overflow, such access would mangle adjacent parts of the register payload. For an underflow, due to all variables being unsigned, the access would likely trample unrelated memory. Since neither is correct, replace these accesses with accesses at the index of 0, and warn about the issue. Suggested-by:
-
- 09 Jul, 2024 21 commits
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== selftests: drv-net: rss_ctx: more tests Add a few more tests for RSS. v1: https://lore.kernel.org/all/20240705015725.680275-1-kuba@kernel.org/ ==================== Link: https://patch.msgid.link/20240708213627.226025-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Some workloads may want to rehash the flows in response to an imbalance. Most effective way to do that is changing the RSS key. Check that changing the key does not cause link flaps or traffic disruption. Disrupting traffic for key update is not incorrect, but makes the key update unusable for rehashing under load. Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240708213627.226025-6-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Some devices dynamically increase and decrease the size of the RSS indirection table based on the number of enabled queues. When that happens driver must maintain the balance of entries (preferably duplicating the smaller table). Reviewed-by:
-
Jakub Kicinski authored
By default main RSS table should change to include all queues. When user sets a specific RSS config the driver should preserve it, even when queue count changes. Driver should refuse to deactivate queues used in the user-set RSS config. For additional contexts driver should still refuse to deactivate queues in use. Whether the contexts should get resized like context 0 when queue count increases is a bit unclear. I anticipate most drivers today don't do that. Since main use case for additional contexts is to set the indir table - it doesn't seem worthwhile to care about behavior of the default table too much. Don't test that. Reviewed-by:
-
Jakub Kicinski authored
Wrap up sending traffic and checking in which queues it landed in a helper. The method used for testing is to send a lot of iperf traffic and check which queues received the most packets. Those should be the queues where we expect iperf to land - either because we installed a filter for the port iperf uses, or we didn't and expect it to use context 0. Contexts get disjoint queue sets, but the main context (AKA context 0) may receive some background traffic (noise). Reviewed-by:
-
Jakub Kicinski authored
The basic test may fail without resetting the RSS indir table. Use the .exec() method to run cleanup early since we re-test with traffic that returning to default state works. While at it reformat the doc a tiny bit. Reviewed-by:
-
Guillaume La Roque authored
Add missing dependency on NET_SWITCHDEV. Fixes: abd5576b ("net: ti: icssg-prueth: Add support for ICSSG switch firmware") Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Guillaume La Roque <glaroque@baylibre.com> Reviewed-by:
MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240708-net-deps-v2-1-b22fb74da2a3@baylibre.comSigned-off-by:
-
Frank Li authored
Add ptimer-handle property to link to ptp-timer node handle. Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: fman@1a00000: 'ptimer-handle' do not match any of the regexes: '^ethernet@[a-f0-9]+$', '^mdio@[a-f0-9]+$', '^muram@[a-f0-9]+$', '^phc@[a-f0-9]+$', '^port@[a-f0-9]+$', 'pinctrl-[0-9]+' Reviewed-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20240708180949.1898495-2-Frank.Li@nxp.comSigned-off-by:
-
Frank Li authored
Add dma-coherent property to fix below warning. arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: fman@1a00000: 'dma-coherent', 'ptimer-handle' do not match any of the regexes: '^ethernet@[a-f0-9]+$', '^mdio@[a-f0-9]+$', '^muram@[a-f0-9]+$', '^phc@[a-f0-9]+$', '^port@[a-f0-9]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/net/fsl,fman.yaml#Reviewed-by:
-
Simon Horman authored
Pass union tls_crypto_context pointer, rather than struct tls_crypto_info pointer, to memzero_explicit(). The address of the pointer is the same before and after. But the new construct means that the size of the dereferenced pointer type matches the size being zeroed. Which aids static analysis. As reported by Smatch: .../tls_main.c:842 do_tls_setsockopt_conf() error: memzero_explicit() 'crypto_info' too small (4 vs 56) No functional change intended. Compile tested only. Reviewed-by:
-
Ido Schimmel authored
The ageing time used by the test is too short for debug kernels and results in entries being aged out prematurely [1]. Fix by increasing the ageing time. The same change was done for the VLAN-aware version of the test in commit dfbab740 ("selftests: forwarding: Make vxlan-bridge-1q pass on debug kernels"). [1] # ./vxlan_bridge_1d.sh [...] # TEST: VXLAN: flood before learning [ OK ] # TEST: VXLAN: show learned FDB entry [ OK ] # TEST: VXLAN: learned FDB entry [FAIL] # veth3: Expected to capture 0 packets, got 4. # RTNETLINK answers: No such file or directory # TEST: VXLAN: deletion of learned FDB entry [ OK ] # TEST: VXLAN: Ageing of learned FDB entry [FAIL] # veth3: Expected to capture 0 packets, got 2. [...] Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-08 The following pull-request contains BPF updates for your *net-next* tree. We've added 102 non-merge commits during the last 28 day(s) which contain a total of 127 files changed, 4606 insertions(+), 980 deletions(-). The main changes are: 1) Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman. 2) Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs, from Daniel Xu. 3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement support for BPF exceptions, from Ilya Leoshkevich. 4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui. 5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option for skbs and add coverage along with it, from Vadim Fedorenko. 6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan. 7) Extend the BPF verifier to track the delta between linked registers in order to better deal with recent LLVM code optimizations, from Alexei Starovoitov. 8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should have been a pointer to the map value, from Benjamin Tissoires. 9) Extend BPF selftests to add regular expression support for test output matching and adjust some of the selftest when compiled under gcc, from Cupertino Miranda. 10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always iterates exactly once anyway, from Dan Carpenter. 11) Add the capability to offload the netfilter flowtable in XDP layer through kfuncs, from Florian Westphal & Lorenzo Bianconi. 12) Various cleanups in networking helpers in BPF selftests to shave off a few lines of open-coded functions on client/server handling, from Geliang Tang. 13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so that x86 JIT does not need to implement detection, from Leon Hwang. 14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an out-of-bounds memory access for dynpointers, from Matt Bobrowski. 15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as it might lead to problems on 32-bit archs, from Jiri Olsa. 16) Enhance traffic validation and dynamic batch size support in xsk selftests, from Tushar Vyavahare. bpf-next-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits) selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature bpf: helpers: fix bpf_wq_set_callback_impl signature libbpf: Add NULL checks to bpf_object__{prev_map,next_map} selftests/bpf: Remove exceptions tests from DENYLIST.s390x s390/bpf: Implement exceptions s390/bpf: Change seen_reg to a mask bpf: Remove unnecessary loop in task_file_seq_get_next() riscv, bpf: Optimize stack usage of trampoline bpf, devmap: Add .map_alloc_check selftests/bpf: Remove arena tests from DENYLIST.s390x selftests/bpf: Add UAF tests for arena atomics selftests/bpf: Introduce __arena_global s390/bpf: Support arena atomics s390/bpf: Enable arena s390/bpf: Support address space cast instruction s390/bpf: Support BPF_PROBE_MEM32 s390/bpf: Land on the next JITed instruction after exception s390/bpf: Introduce pre- and post- probe functions s390/bpf: Get rid of get_probe_mem_regno() ... ==================== Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.netSigned-off-by:Paolo Abeni <pabeni@redhat.com>
-
Oleksij Rempel authored
Add support of 100BaseTX PHY build in to LAN9371 and LAN9372 switches. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Michal Kubiak <michal.kubiak@intel.com> Acked-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Link: https://patch.msgid.link/20240706154201.1456098-1-o.rempel@pengutronix.deSigned-off-by:
-
Thorsten Blum authored
Remove duplicate included header file trace/events/udp.h and the following warning reported by make includecheck: trace/events/udp.h is included more than once Compile-tested only. Signed-off-by:
Thorsten Blum <thorsten.blum@toblux.com> Reviewed-by:
-
FUJITA Tomonori authored
Add support for the netdev-genl per queue stats API. ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \ --dump qstats-get --json '{"scope":"queue"}' [{'ifindex': 4, 'queue-id': 0, 'queue-type': 'rx', 'rx-alloc-fail': 0, 'rx-bytes': 266613, 'rx-packets': 3325}, {'ifindex': 4, 'queue-id': 0, 'queue-type': 'tx', 'tx-bytes': 142823367, 'tx-packets': 2387}] Signed-off-by:FUJITA Tomonori <fujita.tomonori@gmail.com> Reviewed-by:
-
Thorsten Blum authored
Fix typos s/steam/stream/ and spell out Schedule/Unschedule in the comments. Compile-tested only. Signed-off-by:
-
James Chapman authored
syzbot reported a UAF caused by a race when the L2TP work queue closes a tunnel at the same time as a userspace thread closes a session in that tunnel. Tunnel cleanup is handled by a work queue which iterates through the sessions contained within a tunnel, and closes them in turn. Meanwhile, a userspace thread may arbitrarily close a session via either netlink command or by closing the pppox socket in the case of l2tp_ppp. The race condition may occur when l2tp_tunnel_closeall walks the list of sessions in the tunnel and deletes each one. Currently this is implemented using list_for_each_safe, but because the list spinlock is dropped in the loop body it's possible for other threads to manipulate the list during list_for_each_safe's list walk. This can lead to the list iterator being corrupted, leading to list_for_each_safe spinning. One sequence of events which may lead to this is as follows: * A tunnel is created, containing two sessions A and B. * A thread closes the tunnel, triggering tunnel cleanup via the work queue. * l2tp_tunnel_closeall runs in the context of the work queue. It removes session A from the tunnel session list, then drops the list lock. At this point the list_for_each_safe temporary variable is pointing to the other session on the list, which is session B, and the list can be manipulated by other threads since the list lock has been released. * Userspace closes session B, which removes the session from its parent tunnel via l2tp_session_delete. Since l2tp_tunnel_closeall has released the tunnel list lock, l2tp_session_delete is able to call list_del_init on the session B list node. * Back on the work queue, l2tp_tunnel_closeall resumes execution and will now spin forever on the same list entry until the underlying session structure is freed, at which point UAF occurs. The solution is to iterate over the tunnel's session list using list_first_entry_not_null to avoid the possibility of the list iterator pointing at a list item which may be removed during the walk. Also, have l2tp_tunnel_closeall ref each session while it processes it to prevent another thread from freeing it. cpu1 cpu2 --- --- pppol2tp_release() spin_lock_bh(&tunnel->list_lock); for (;;) { session = list_first_entry_or_null(&tunnel->session_list, struct l2tp_session, list); if (!session) break; list_del_init(&session->list); spin_unlock_bh(&tunnel->list_lock); l2tp_session_delete(session); l2tp_session_delete(session); spin_lock_bh(&tunnel->list_lock); } spin_unlock_bh(&tunnel->list_lock); Calling l2tp_session_delete on the same session twice isn't a problem per-se, but if cpu2 manages to destruct the socket and unref the session to zero before cpu1 progresses then it would lead to UAF. Reported-by: syzbot+b471b7c936301a59745b@syzkaller.appspotmail.com Reported-by: syzbot+c041b4ce3a6dfd1e63e2@syzkaller.appspotmail.com Fixes: d18d3f0a ("l2tp: replace hlist with simple list for per-tunnel session list") Signed-off-by:James Chapman <jchapman@katalix.com> Signed-off-by:
Tom Parkin <tparkin@katalix.com> Link: https://patch.msgid.link/20240704152508.1923908-1-jchapman@katalix.comSigned-off-by:
-
Jakub Kicinski authored
Bartosz Golaszewski says: ==================== net: stmmac: qcom-ethqos: enable 2.5G ethernet on sa8775p-ride Here are the changes required to enable 2.5G ethernet on sa8775p-ride. As advised by Andrew Lunn and Russell King, I am reusing the existing stmmac infrastructure to enable the SGMII loopback and so I dropped the patches adding new callbacks to the driver core. I also added more details to the commit message and made sure the workaround is only enabled on Rev 3 of the board (with AQR115C PHY). Also: dropped any mentions of the OCSGMII mode. v2: https://lore.kernel.org/20240627113948.25358-1-brgl@bgdev.pl v1: https://lore.kernel.org/20240619184550.34524-1-brgl@bgdev.pl ==================== Link: https://patch.msgid.link/20240703181500.28491-1-brgl@bgdev.plSigned-off-by:
-
Bartosz Golaszewski authored
On sa8775p-ride-r3 the RX clocks from the AQR115C PHY are not available at the time of the DMA reset. We can however extract the RX clock from the internal SERDES block. Once the link is up, we can revert to the previous state. The AQR115C PHY doesn't support in-band signalling so we can count on getting the link up notification and safely reuse existing callbacks which are already used by another HW quirk workaround which enables the functional clock to avoid a DMA reset due to timeout. Only enable loopback on revision 3 of the board - check the phy_mode to make sure. Signed-off-by:
-
Bartosz Golaszewski authored
Add support for 2.5G speed in 2500BASEX mode to the QCom ethqos driver. Signed-off-by:
-
Johannes Berg authored
WARN_ON_ONCE("string") doesn't really do what appears to be intended, so fix that. Signed-off-by:Johannes Berg <johannes.berg@intel.com> Fixes: 90de47f0 ("page_pool: fragment API support for 32-bit arch with 64-bit DMA") Link: https://patch.msgid.link/20240705134221.2f4de205caa1.I28496dc0f2ced580282d1fb892048017c4491e21@changeidSigned-off-by:
-
- 08 Jul, 2024 1 commit
-
-
Jakub Kicinski authored
It's very useful to be able to interrupt the tests during development. Detect KeyboardInterrupt, run the cleanups and exit. Link: https://patch.msgid.link/20240705015222.675840-1-kuba@kernel.orgSigned-off-by:
-
